Search

The use of SAR data for flood mapping is well established. However, the problem of the missed detection of rapidly evolving floods remains. Recently, the Italian Space Agency deployed the COSMO-SkyMed Second Generation (CSG) constellation, with an on-demand capability that makes it possible to reduce the number of missed floods. However, for on-demand SAR acquisitions, pre-flood images are generally not available, and change-detection methods, commonly adopted for flood mapping using SAR, cannot be applied. This study focused on the high-resolution CSG images of a flood that occurred in central Italy. An accurate analysis of the radar responses of the different targets included in the scenes observed by GSG was performed. Then, a methodology to detect floods using high-resolution single SAR images was developed. The methodology was based on image segmentation and fuzzy logic. Image segmentation allowed us to analyze homogeneous areas in the CSG images. Fuzzy logic was used to integrate the SAR data with ancillary information that was useful when change-detection methods could not be applied. A comparison with the maps produced by the Copernicus Emergency Service, using high-resolution optical images, demonstrated the reliability of the methodology. [ABSTRACT FROM AUTHOR]

An automated tool for pre-operational mapping of floods and inland waters using Sentinel-1 data is presented. The acronym AUTOWADE (AUTOmatic Water Areas DEtector) is used to denote it. The tool provides the end user (Italian Department of Civil Protection) with a continuous, near real-time (NRT) monitoring of the extent of inland water surfaces (floodwater and permanent water). It implements the following operations: downloading of Sentinel-1 products; preprocessing of the products and storage of the resulting geocoded and calibrated data; generation of the intermediate products, such as the exclusion mask; application of a floodwater/permanent water mapping algorithm; generation of the output layer, i.e., a map of floodwater/permanent water; delivery of the output layer to the end user. The open floodwater/permanent water mapping algorithm implemented in AUTOWADE is based on a new approach, denoted as buffer-from-edge (BFE), which combines different techniques, such as clustering, edge filtering, automatic thresholding and region growing. AUTOWADE copes also with the typical presence of gaps in the flood maps caused by undetected flooded vegetation. An attempt to partially fill these gaps by analyzing vegetated areas adjacent to open water is performed by another algorithm implemented in the tool, based on the fuzzy logic. The BFE approach has been validated offline using maps produced by the Copernicus Emergency Management Service. Validation has given good results with a F1-score larger than 0.87 and a kappa coefficient larger than 0.80. The algorithm to detect flooded vegetation has been visually compared with optical data and aerial photos; its capability to fill some of the gaps present in flood maps has been confirmed. [ABSTRACT FROM AUTHOR]

This paper presents a new method, based on clustering and thresholding, to automatically perform binary change detection in multitemporal spectral indices. The method is denoted as Buffer-From-Cluster Approach (BFCA). To estimate the distributions of changed and unchanged pixels, as needed for the purpose of a reliable thresholding of a spectral index, a clustering algorithm is preliminarily applied to identify image objects possibly corresponding to areas where significant changes occurred. Then, a buffer zone is created around the selected cluster to identify unchanged areas surrounding changed ones. The cluster and the buffer zone are jointly analyzed to estimate the distributions of changed and unchanged pixels and to verify that they can be distinguished from each other. Finally, the results of thresholding and clustering are combined to generate the binary change map. The BFCA has been conceived to map the extent of the areas affected by a natural disaster like wildfire. To validate the proposed method, burned area maps produced by applying the BFCA to spectral indices derived from Sentinel-2 data have been compared to maps produced by the Copernicus Emergency Management Service. For testing the multi-hazard detection capability, the same kind of exercise has been carried out for a flooding test case too. The positive results of the comparison have confirmed the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

A fully automated processing chain for near real-time mapping of burned forest areas using Sentinel-2 multispectral data is presented. The acronym AUTOBAM (AUTOmatic Burned Areas Mapper) is used to denote it. AUTOBAM is conceived to work daily at a national scale for the Italian territory to support the Italian Civil Protection Department in the management of one of the major natural hazards, which affects the territory. The processing chain includes a Sentinel-2 data procurement component, an image processing algorithm, and the delivery of the map to the end-user. The data procurement component searches every day for the most updated products into different archives. The image processing part represents the core of AUTOBAM and implements an algorithm for burned forest areas mapping that uses, as fundamental parameters, the relativized form of the delta normalized burn ratio and the normalized difference vegetation index. The minimum mapping unit is 1 ha. The algorithm implemented in the image processing block is validated off-line using maps of burned areas produced by the Copernicus Emergency Management Service. The results of the validation shows an overall accuracy (considering the classes of burned and unburned areas) larger than 95% and a kappa coefficient larger than 80%. For what concerns the class of burned areas, the commission error is around 1%−3%, except for one case where it reaches 25%, while the omission error ranges between 6% and 25%. [ABSTRACT FROM AUTHOR]