Search

Martian rocks contain crucial information about the genesis of Mars and the historical evolution of Martian climate change. Consequently, extracting and examining Martian rocks are pivotal in advancing our comprehensive understanding of the red planet. However, the current core drill string is prone to wear and tear, and the samples are susceptible to thermal denaturation. To address these challenges, we introduce two novel types of drill bits, the conical straight junk slot and the conical spiral junk slot, both employing impregnated diamond as the primary material. Comparative experiments were meticulously conducted to evaluate the influence of different junk configurations on drilling parameters, including speed, abrasion resistance, drilling force loading, and sample temperature rise. The findings unequivocally demonstrate the superior performance of the spiral junk slot. Furthermore, simulations were performed to examine the drilling process on basalt using a fixed configuration drill bit, validating the occurrence of the sample temperature rise. The research presented in this paper offers valuable programmatic references and essential data support for future Martian rock coring drilling missions. [ABSTRACT FROM AUTHOR]

Under the conditions of drilling in gravel-bearing and heterogeneous stratas, the movement and force of the PDC bit during drilling are highly unstable. Irregular impact loads often cause fatigue failures such as tooth fracture, tooth breakage and delamination of the composite sheet. Dynamic impact load is the main cause of fatigue failure of cutting-tooth, which seriously affects the rock-breaking performance of PDC bits. This paper proposes a flexible cutting tooth unit consisting of a central tooth, an elastic element, and a base. The technical concept of flexible-cutting rock breaking is to reduce the impact load amplitude suffered during the cutting process to a certain threshold range by setting elastic elements or reducing the support stiffness of the cutting tooth, so as to inhibit the expansion of micro defects caused by the impact dynamic load of cutting teeth and prolong the service life of drill bits. The finite-element models of flexible cutting teeth for rock cutting were established. The influence of cutting depth, front rake angle and stiffness of elastic elements on the cushioning and vibration-absorption effect of flexible cutting was analysed. The results show that flexible cutting can reduce the peak and average value of von Mises stress at the cutting edge. Under different cutting-depth conditions, the decline rates were 21.45–49.02% and 9.42–17.8%, respectively. Then, under different front-rake-angle conditions, the decline rates were 20.51–24.02% and 9.41–17.8%, respectively. There is a suitable stiffness of the elastic element, which makes the peak and average value of von Mises stress at the cutting edge of the flexible cutting-tooth unit perform better and the effect of improving the uneven stress distribution at the cutting edge better. Flexible cutting technology can effectively improve the adaptability of the PDC bit in heterogeneous formations and reduce the occurrence of abnormal failure of cutting teeth. The research results of this paper can provide theoretical support for the drilling speed of PDC bits in hard formations. [ABSTRACT FROM AUTHOR]

It is hypothesized that there is no statistically significant impact of drilling speed (DS) on the primary stability (PS) of narrow-diameter implants (NDIs) with varying thread designs placed in dense and soft simulated bone. The aim of this in vitro study was to evaluate the impact of DS on the PS of NDIs with varying thread designs placed in dense and soft simulated bone. Two hundred and forty osteotomies for placement of various implant macro-designs were divided into three groups (80 implants per group): Group A (NobelActive, 3.0/11.5 mm); Group B (Astra OsseoSpeed-EV, 3.0/11 mm); and Group C (Eztetic-Zimmer, 3.1/11.5 mm) implants. These implants were placed in artificial dense and soft simulated bone using DSs of 800 and 2000 revolutions per minute (RPM). Resonance frequency analysis (RFA) and implant stability quotient (ISQ) were assessed. Group comparisons were performed using the one-way analysis of variance with Tukey's post hoc tests. Level of significance was set at P < 0.05. In groups A and B, there was no difference in the ISQ for NDIs inserted in dense bone at 800 and 2000 RPM. In Group C, ISQ was significantly higher for NDIs placed in dense bone at 800 PRM compared to 2000 RPM (P < 0.05). In Group A, ISQ values were significantly higher for NDIs inserted in soft bone at 2000 RPM as compared to those inserted at 800 RPM (P < 0.05). For NDIs, a lower drilling speed in dense artificial simulated bone and a higher drilling speed in soft artificial simulated bone is associated with high primary stability. [ABSTRACT FROM AUTHOR]