Search

In the context of waters polluted with different high-risk contaminants, the development of efficient materials able to efficiently clean them is necessary. In the first part, the present review focuses on the ability of various types of magnetic layered double hydroxide materials to act as adsorbents for water contaminated mainly with heavy metals and dyes. Also, this paper reviews the ability of different magnetic layered double hydroxide materials to act as potential adsorbents for the treatment of wastewater contaminated with other types of pollutants, such as pharmaceutical products, phenolic compounds, phytohormones, and fungicides. In the second part, the applicability of the catalytic method for water depollution is explored. Thus, the use of simple or composite materials based on Fe3O4 is reviewed for the purpose of the catalytic degradation of organic compounds (dyes/phenols/pharmaceuticals). At the end, a review of multifunctional materials able to simultaneously neutralize different types of pollutants from wastewater is provided. [ABSTRACT FROM AUTHOR]

In this work, we focus on a detailed study of the role of each component layer in the multilayer structure of a magnetic tunnel junction (MTJ) as well as the analysis of the effects that the deposition parameters of the thin films have on the performance of the structure. Various techniques including atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to investigate the effects of deposition parameters on the surface roughness and thickness of individual layers within the MTJ structure. Furthermore, this study investigates the influence of thin films thickness on the magnetoresistive properties of the MTJ structure, focusing on the free ferromagnetic layer and the barrier layer (MgO). Through systematic analysis and optimization of the deposition parameters, this study demonstrates a significant improvement in the tunnel magnetoresistance (TMR) of the MTJ structure of 10% on average, highlighting the importance of precise control over thin films properties for enhancing device performance. [ABSTRACT FROM AUTHOR]

In this study, we report the influence of the Pt concentration in CoxPt100−x alloys on the catalytic activity of the alloys for 4-nitrophenol (4-NP) reduction. More precisely, a series of CoxPt100−x alloys with a Pt concentration ranging between 60% and 95% were prepared using electrodeposition at controlled potentials from stable hexachloroplatinate aqueous solution. The Pt concentration was tuned by varying the electrodeposition potential from −0.6 to −0.9 V. The changes in the CoxPt100−x alloy microstructure and crystalline structure have been investigated using SEM and TEM analysis. Our results show that the microstructure and the crystalline structure of the as-prepared materials do not depend on the electrodeposition potential. However, the catalytic activity of CoxPt100−x alloys is closely correlated with the potential applied during electrochemical synthesis, hence the Pt content. We demonstrated that the synthesized materials present a high catalytic activity (approx. 90%) after six cycles of reusability despite the fact that the Pt content of the as-prepared alloys decreases. The easy preparation method that guarantees more than 97% catalytic activity of the CoxPt100−x alloys, the easy recovery from solution, and the possibility of reusing the CoxPt100−x alloys are the benefits of the present study. [ABSTRACT FROM AUTHOR]

The commercialization of the Direct Methanol Fuel Cell (DMFC) is limited due to the high cost and low efficiency of the electrocatalysts. In this context, the development of new electrocatalysts able to efficiently oxidize the methanol and to have at the same time low price and high stability is one of the researcher's milestones. In this work, CoPt alloys with different Pt content were prepared, and the efficiency of the alloys to be used as electrocatalysts for the methanol oxidation reaction (MOR) was investigated. Our data show that the electrocatalytic performance of the CoPt electrodeposited alloys is strongly influenced by the synthesis conditions, mainly by the potential applied during the synthesis. The best electrocatalytic activity was obtained for the samples prepared at −0.8 V/SCE. [ABSTRACT FROM AUTHOR]

The aim of this work was to investigate and prove the possibility of the real-time detection of magnetic nanoparticles (MNPs) distributed in solid material by using a tunnel magnetoresistance-based (TMR) sensor. Following the detection tests of FeCrNbB magnetic nanoparticles distributed in transparent epoxy resin (EPON 812) and measuring the sensor output voltage changes at different particle concentrations, the detection ability of the sensor was demonstrated. For the proposed TMR sensor, we measured a maximum magnetoresistance ratio of about 53% and a sensitivity of 1.24%/Oe. This type of sensor could facilitate a new path of research in the field of magnetic hyperthermia by locating cancer cells. [ABSTRACT FROM AUTHOR]

In this paper, 3 µm length and 200 nm diameter CoPt nanowire arrays (NWs) with different Co contents were prepared by electrodeposition at a controlled potential from an aqueous hexachloroplatinate solution. The synthesis occurred at two different solution pH values (2.5 and 5.5) in an electrochemical bath free of additives, as well as with saccharin as an organic additive. A complete morphological, compositional, structural and magnetic characterization of the as-prepared nanowires has been carried out. The results show that, by controlling the electrodeposition conditions, the Co content of the alloy can be tuned from 16% to 92%. The crystalline structure of the as-deposited compounds can also be controlled, with the obtained data showing that the face-centered cubic (fcc) crystalline structure changes into a hexagonal close-packed (hcp) structure when saccharin is used as an organic additive during the electrodeposition. The changes in the alloy's composition and crystalline structure strongly influence the magnetic properties of the NW's arrays. [ABSTRACT FROM AUTHOR]

CoPt alloys with Pt contents from 15 to 90% were prepared using low-cost electrochemical deposition. Different samples were synthesized from electrochemical baths at pH = 2.5 and 5.5 in a solution with and without saccharin as an additive. The morphology, composition and crystalline structure of the as-prepared samples were investigated by High Resolution—Scanning Electron Microscopy (HR-SEM), Atomic Force Microscopy (AFM), Ultra-high Resolution—Transmission Electron Microscopy (UHR-TEM), Energy-Dispersive X-ray Spectroscopy (EDX), and X-ray Diffraction (XRD). XRD investigations revealed that fcc crystalline structure transforms into hcp crystalline structure when the pH of the electrochemical bath is increased from 2.5 to 5.5 as well as when saccharin is added to the electrochemical bath. The catalytic performance of the CoPt alloys for the nitro to amino phenol compounds conversion was investigated for all the prepared samples, and the results show that the conversion degree increases (from 11.4 to 96.5%) even though the Pt content in the samples decreases. From the samples prepared from the electrochemical bath with saccharin, a study regarding the effect of contact time was performed. The results indicated that after only 5 min, the CoPt sample prepared at pH = 5.5 in the presence of saccharin completely converted the nitro compound to an amino compound. [ABSTRACT FROM AUTHOR]

For the purpose of designing the adsorption systems, adsorption isotherm models provide information on the adsorption process. 10.3390/polym14050914 8 Buema G., Harja M., Lupu N., Chiriac H., Forminte L., Ciobanu G., Bucur D., Bucur R.D. Adsorption performance of modified fly ash for copper ions removal from aqueous solution. 10.3390/w13131725 13 Wang R., Deng L., Fan X., Li K., Lu H., Li W. Removal of heavy metal ion cobalt (II) from wastewater via adsorption method using microcrystalline cellulose-magnesium hydroxide. "Advanced Materials for Water Remediation" is a Special Issue of I Materials i , which will take into consideration all the papers discussing the synthesis, characterization and application of advanced materials for water remediation. [Extracted from the article]

Another conclusion of this study showed that the use of Ni nanoparticles allows the production of purer cell populations than the use of spherical nanoparticles. The authors demonstrated that functionalized Ni nanoparticles in the shape of nanowires have a higher cell separation efficiency compared with magnetic nanoparticles with spherical shape, even at a concentration 60 times lower. The effectiveness of cell separation with Ni nanoparticles compared to that achieved with magnetic nanoparticles was also studied by Gao et al. [[22]]. The encapsulation of magnetic nanoparticles in an organic compound layer increases the circulation time of nanoparticles in the body, making the nanomaterials biocompatible [[15]]. [Extracted from the article]