Search

Biological macromolecules like polysaccharides/proteins/glycoproteins have been widely used in the field of tissue engineering due to their ability to mimic the extracellular matrix of tissue. In addition to this, these macromolecules are found to have higher biocompatibility and no/lesser toxicity when compared to synthetic polymers. In recent years, scaffolds made up of proteins, polysaccharides, or glycoproteins have been highly used due to their tensile strength, biodegradability, and flexibility. This review is about the fabrication methods and applications of scaffolds made using various biological macromolecules, including polysaccharides like chitosan, agarose, cellulose, and dextran and proteins like soy proteins, zein proteins, etc. Biopolymer-based nanocomposite production and its application and limitations are also discussed in this review. This review also emphasizes the importance of using natural polymers rather than synthetic ones for developing scaffolds, as natural polymers have unique properties, like high biocompatibility, biodegradability, accessibility, stability, absence of toxicity, and low cost.

Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.

Polyhydroxyalkanoate (PHA), specifically poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx), PHBHHx) with physical properties governed by the 3-hydroxyhexanoate (3HHx) mole fraction, is a promising bioplastic. Although engineered strains used to produce P(3HB-co-3HHx) with various 3HHx mole contents and fermentation techniques have been studied, mass production with specific 3HHx fractions and monomers depends on the batch, supply of substrates, and strains, resulting in the time-consuming development of strains and complex culture conditions for P(3HB-co-3HHx). To overcome these limitations, we blended poly(3-hydroxybutyrate) [(P(3HB), produced from C. necator H16] and P(3HB-co-20 mol%3HHx) [from C. necator 2668/pCB81] to prepare films with various 3HHx contents. We evaluated the molecular weight and physical, thermal, and mechanical properties of these films and confirmed the influence of the 3HHx monomer content on the mechanical and thermal properties as well as degradability of the blended P(3HB-co-3HHx) films containing various 3HHx mole fractions, similar to that of original microbial-based P(3HB-co-3HHx). Moreover, the degradation rate analyzed via Microbulbifer sp. was >76% at all blending ratios within 2 days, whereas a weaker effect of the 3HHx mole fraction of the blended polymer on degradation was observed. P(3HB-co-3HHx) could be produced via simple blending using abundantly produced P(3HB) and P(3HB-co-20 mol%HHx), and the resulting copolymer is applicable as a biodegradable plastic. [ABSTRACT FROM AUTHOR]

This study focused on the isolation of actinobacteria capable of producing extracellular keratinase from keratin-rich residues, which led to the selection of an actinobacterial strain referenced as Streptomyces strain DZ 06 (ES41). The Plackett–Burman screening plan was used for the statistical optimization of the enzymatic production medium, leading to the identification of five key parameters that achieved a maximum activity of 180.1 U/mL. Further refinement using response surface methodology (RSM) with a Box–Behnken design enhanced enzyme production to approximately 458 U/mL. Model validation, based on the statistical predictions, demonstrated that optimal keratinase activity of 489.24 U/mL could be attained with 6.13 g/L of chicken feather meal, a pH of 6.25, incubation at 40.65 °C for 4.11 days, and an inoculum size of 3.98 × 107 spores/mL. The optimized culture conditions yielded a 21.67-fold increase in keratinase compared with the initial non-optimized standard conditions. The results show that this bacterium is an excellent candidate for industrial applications when optimal conditions are used to minimize the overall costs of the enzyme production process. [ABSTRACT FROM AUTHOR]

The rising demand for effective bone regeneration has underscored the limitations of traditional methods like autografts and allografts, including donor site morbidity and insufficient biological signaling. This review examines nanoparticles (NPs) in tissue engineering (TE) to address these challenges, evaluating polymers, metals, ceramics, and composites for their potential to enhance osteogenesis and angiogenesis by mimicking the extracellular matrix (ECM) nanostructure. The methods involved synthesizing and characterizing nanoparticle-based scaffoldsand integrating hydroxyapatite (HAp) with polymers to enhance mechanical properties and osteogenic potential. The results showed that these NPs significantly promote cell growth, differentiation, and bone formation, with carbon-based NPs like graphene and carbon nanotubes showing promise. NPs offer versatile, biocompatible, and customizable scaffolds that enhance drug delivery and support bone repair. Despite promising results, challenges with cytotoxicity, biodistribution, and immune responses remain. Addressing these issues through surface modifications and biocompatible molecules can improve the biocompatibility and efficacy of nanomaterials. Future research should focus on long-term in vivo studies to assess the safety and efficacy of NP-based scaffolds and explore synergistic effects with other bioactive molecules or growth factors. This review underscores the transformative potential of NPs in advancing BTE and calls for further research to optimize these technologies for clinical applications. [ABSTRACT FROM AUTHOR]

Silver nanoparticles (AgNPs) are leading the way in nanotechnological innovation, combining the captivating properties of silver with the accuracy of nanoscale engineering, thus revolutionizing material science. Three main techniques arise within the alchemical domains of AgNP genesis: chemical, physical, and biological synthesis. Each possesses its distinct form of magic for controlling size, shape, and scalability—key factors necessary for achieving expertise in the practical application of nanoparticles. The story unravels, describing the careful coordination of chemical reduction, the environmentally sensitive charm of green synthesis utilizing plant extracts, and the precise accuracy of physical techniques. AgNPs are highly praised in the field of healthcare for their powerful antibacterial characteristics. These little warriors display a wide-ranging attack against bacteria, fungi, parasites, and viruses. Their critical significance in combating hospital-acquired and surgical site infections is highly praised, serving as a beacon of hope in the fight against the challenging problem of antibiotic resistance. In addition to their ability to kill bacteria, AgNPs are also known to promote tissue regeneration and facilitate wound healing. The field of cancer has also observed the adaptability of AgNPs. The review documents their role as innovative carriers of drugs, specifically designed to target cancer cells with accuracy, minimizing harm to healthy tissues. Additionally, it explores their potential as cancer therapy or anticancer agents capable of disrupting the growth of tumors. In the food business, AgNPs are utilized to enhance the durability of packing materials and coatings by infusing them with their bactericidal properties. This results in improved food safety measures and a significant increase in the duration that products can be stored, thereby tackling the crucial issue of food preservation. This academic analysis recognizes the many difficulties that come with the creation and incorporation of AgNPs. This statement pertains to the evaluation of environmental factors and the effort to enhance synthetic processes. The review predicts future academic pursuits, envisioning progress that will enhance the usefulness of AgNPs and increase their importance from being new to becoming essential within the realms of science and industry. Besides, AgNPs are not only a subject of scholarly interest but also a crucial component in the continuous effort to tackle some of the most urgent health and conservation concerns of contemporary society. This review aims to explore the complex process of AgNP synthesis and highlight their numerous uses, with a special focus on their growing importance in the healthcare and food business sectors. This review invites the scientific community to explore the extensive possibilities of AgNPs in order to fully understand and utilize their potential. [ABSTRACT FROM AUTHOR]

In this study, a comparative analysis of silver nanoparticles treatment and chitosan coating on packaging paper barrier properties was carried out. In order to examine the water, grease, and antibacterial barrier properties of silver nanoparticle-treated and chitosan-coated laboratory-obtained paper samples, a mixture of bleached softwood and hardwood celluloses was used. In order to conduct the comparative analysis SEM, water contact angle, Cobb60, and Kit tests were carried out on a cellulose sample, and four paper samples (three of them treated with silver nanoparticles—1, 2, and 3 mL/20 cm2 or chitosan coated—0.5, 1, and 2 g/m2) together with the inhibition activity against nine Gram-positive and Gram-negative bacteria, yeast, and fungal strains. The study found out that increasing the silver nanoparticle treatment and chitosan coating led to improved water resistance, while grease resistance was improved only for chitosan coated paper samples. Additionally, paper treated with 3 mL/20 cm2 of silver nanoparticles had the highest antibacterial protection (81.6%) against the Gram-positive bacterium Staphylococcus aureus, followed by Gram-negative Escherichia coli (75.8%). For the rest of the studied microorganisms, the average efficiency of the treated paper was 40.79%. The treatment of the paper with 1 and 2 mL/20 cm2 of silver nanoparticles was less effective—27.13 and 39.83%, respectively. The antibacterial protection of 2 g/m2 chitosan-coated paper samples was the most effective (average 79%) against the tested bacterial, yeast, and fungal strains. At 1 and 0.5 g/m2 chitosan coatings, the efficiency was 72.38% and 54.67%, respectively. Gram-positive bacteria, yeasts, and fungal strains were more sensitive to chitosan supplementation. [ABSTRACT FROM AUTHOR]

The industrial production of polyhydroxyalkanoates (PHAs) faces several limitations that hinder their competitiveness against traditional plastics, mainly due to high production costs and complex recovery processes. Innovations in microbial biotechnology offer promising solutions to overcome these challenges. The modification of the biosynthetic pathways is one of the main tactics; allowing for direct carbon flux toward PHA formation, increasing polymer accumulation and improving polymer properties. Additionally, techniques have been implemented to expand the range of renewable substrates used in PHA production. These feedstocks are inexpensive and plentiful but require costly and energy-intensive pretreatment. By removing the need for pretreatment and enabling the direct use of these raw materials, microbial biotechnology aims to reduce production costs. Furthermore, improving downstream processes to facilitate the separation of biomass from culture broth and the recovery of PHAs is critical. Genetic modifications that alter cell morphology and allow PHA secretion directly into the culture medium simplify the extraction and purification process, significantly reducing operating costs. These advances in microbial biotechnology not only enhance the efficient and sustainable production of PHAs, but also position these biopolymers as a viable and competitive alternative to petroleum-based plastics, contributing to a circular economy and reducing the dependence on fossil resources. [ABSTRACT FROM AUTHOR]

In recent years, biopolymer-based nano-drug delivery systems with antioxidative properties have gained significant attention in the field of pharmaceutical research. These systems offer promising strategies for targeted and controlled drug delivery while also providing antioxidant effects that can mitigate oxidative stress-related diseases. Generally, the healthcare landscape is constantly evolving, necessitating the continual development of innovative therapeutic approaches and drug delivery systems (DDSs). DDSs play a pivotal role in enhancing treatment efficacy, minimizing adverse effects, and optimizing patient compliance. Among these, nanotechnology-driven delivery approaches have garnered significant attention due to their unique properties, such as improved solubility, controlled release, and targeted delivery. Nanomaterials, including nanoparticles, nanocapsules, nanotubes, etc., offer versatile platforms for drug delivery and tissue engineering applications. Additionally, biopolymer-based DDSs hold immense promise, leveraging natural or synthetic biopolymers to encapsulate drugs and enable targeted and controlled release. These systems offer numerous advantages, including biocompatibility, biodegradability, and low immunogenicity. The utilization of polysaccharides, polynucleotides, proteins, and polyesters as biopolymer matrices further enhances the versatility and applicability of DDSs. Moreover, substances with antioxidative properties have emerged as key players in combating oxidative stress-related diseases, offering protection against cellular damage and chronic illnesses. The development of biopolymer-based nanoformulations with antioxidative properties represents a burgeoning research area, with a substantial increase in publications in recent years. This review provides a comprehensive overview of the recent developments within this area over the past five years. It discusses various biopolymer materials, fabrication techniques, stabilizers, factors influencing degradation, and drug release. Additionally, it highlights emerging trends, challenges, and prospects in this rapidly evolving field. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS), also known as forever chemicals, exhibit exceptional chemical stability and resistance to environmental degradation thanks to their strong C-F bonds and nonpolar nature. However, their widespread use and persistence have a devastating impact on the environment. This review examines the roles of PFAS in tribological applications, specifically in lubricants and lubricating systems. This article focuses on conventional and advanced lubricants, including ionic liquids (ILs) and their use in modern automotive vehicles. The objective of this paper is to provide a comprehensive overview of the adverse impacts of PFAS whilst acknowledging their outstanding performance in surface coatings, composite materials, and as additives in oils and greases. The pathways through which PFAS are introduced into the environment via lubricating systems such as in seals and O-rings are identified, alongside their subsequent dispersion routes and the interfaces across which they interact. Furthermore, we examine the toxicological implications of PFAS exposure on terrestrial and aquatic life forms, including plants, animals, and humans, along with the ecological consequences of bioaccumulation and biomagnification across trophic levels and ecosystems. This article ends with potential remediation strategies for PFAS use, including advanced treatment technologies, biodegradation, recovery and recycling methods, and the search for more environmentally benign alternatives. [ABSTRACT FROM AUTHOR]

Background: The elaboration of biocompatible nerve guide conduits (NGCs) has been studied in recent years as a treatment for total nerve rupture lesions (axonotmesis). Different natural polymers have been used in these studies, including cellulose associated with soy protein. The purpose of this report was to describe manufacturing NGCs suitable for nerve regeneration using the method of dip coating and evaporation of solvent with cellulose acetate (CA) functionalized with soy protein acid hydrolysate (SPAH). Methods: The manufacturing method and bacterial control precautions for the CA/SPAH NGCs were described. The structure of the NGCs was analyzed under a scanning electron microscope (SEM); porosity was analyzed with a degassing method using a porosimeter. Schwann cell (SCL 4.1/F7) biocompatibility of cell-seeded nerve guide conduits was evaluated with the MTT assay. Results: The method employed allowed an easy elaboration and customization of NGCs, free of bacteria, with pores in the internal surface, and the uniform wall thickness allowed manipulation, which showed flexibility; additionally, the sample was suturable. The NGCs showed initial biocompatibility with Schwann cells, revealing cells adhered to the NGC structure after 5 days. Conclusions: The fabricated CA/SPAH NGCs showed adequate features to be used for peripheral nerve regeneration studies. Future reports are necessary to discuss the ideal concentration of CA and SPAH and the mechanical and physicochemical properties of this biomaterial. [ABSTRACT FROM AUTHOR]

Bone regeneration and repair are complex processes with the potential of added complications, like delayed repair, fracture non-union, and post-surgical infections. These conditions remain a challenge globally, pressurizing the economy and patients suffering from these conditions. Applications of nanotechnology (NBT) in the field of medicine have provided a medium for several approaches to support these global challenges. Tissue engineering is one such field that has been on the rise in the last three decades through the utilization of NBT for addressing the challenges related to bone regeneration. First, NBT enables the formation of scaffolds at the nanoscale needed for bone tissue engineering (BTE) using natural and synthetic polymers, as well as with minerals and metals. Then, it aids the development of the nano-formulation strategized to deliver antimicrobial drugs and/or growth factors through various ways to enhance bone repair through the scaffold. Third, NBT facilitates the use of specialized nanoparticles to image and track cellular events in vitro as well as in vivo. This review is an effort to bring together the current knowledge in the field of BTE and present the scope of ever-evolving NBT, a contribution towards precision medicine. [ABSTRACT FROM AUTHOR]

A great research effort is involved in polyhydroxyalkanoates (PHAs) production and characterization since they are an attractive degradable polyester family that potentially could substitute oil-based polymers. This is due to two main key factors: their production is sustainable, being that they are produced by microorganisms possibly fed by organic waste-derived products, and they are degradable. Moreover, PHAs' thermal and mechanical properties could be tuned by varying their monomeric composition through the proper selection of microorganism feedstock and bioreactor operative conditions. Hence, a rapid and facile determination of the PHA chemical structure by widely available instrumentation is useful. As an alternative to the standard gas-chromatographic method, a new procedure for the composition determination of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P3HBV), the most common PHA copolymer, by attenuated total reflection FTIR (ATR-FTIR) is presented. It is based on the linear dependence of selected and normalized absorption band intensity with the molar fraction of repeating units. To break free from the crystallinity variability, which affects the result reproducibility and data scattering, the polymer sample was rapidly quenched from the melt directly on the surface of the ATR internal reflection element and analyzed. The data obtained from 14 samples with a molar fraction of 3-hydroxybutyrate repeating units (X3HB) ranging from 0.15 to 1 were analyzed. According to preliminary analyses, the normalized intensity of two absorption bands was selected to develop a calibration method able to predict X3HB of unknown samples and to evaluate the related uncertainty through prediction intervals of inverse regression. The proposed method proves to be useful for an easy and rapid estimation of P3HBV composition. [ABSTRACT FROM AUTHOR]

Zea mays L. Poaceae stigma (corn silk, CS) is a byproduct of agricultural waste and is used as a traditional herb in many countries. CS is rich in chemical compounds known to benefit human health and is also a remedy for infectious diseases and has anti-proliferative effects on human cancer cell lines. In the present study, CS extract has been evaluated for its antioxidant, antibacterial, and anti-tyrosinase activities and its phytochemical composition. The higher total phenolic and flavonoid contents were found in the ethanolic extract of corn silk (CSA), at 28.27 ± 0.86 mg gallic acid equivalent/g extract and 4.71 ± 0.79 mg quercetin equivalent/g extract, respectively. Moreover, the antioxidant content of CSA was found at 5.22 ± 0.87 and 13.20 ± 0.42 mg gallic acid equivalent/g extract using DPPH and reducing power assays. Furthermore, the ethanolic extract of corn silk showed tyrosinase inhibition with an IC50 value of 12.45 µg/mL. The bacterial growth inhibition of CSA was tested using agar disc diffusion and broth dilution assays against Cutibacterium acnes and Staphylococcus epidermidis. It was found that CSA inhibited C. acnes and S. epidermidis with an inhibition zone of 11.7 ± 1.2 and 9.3 ± 0.6 mm, respectively. Moreover, the CSA showed MIC/MBC of 15.625 mg/mL against C. acnes. The following phytochemical compounds were detected in CSA: cardiac glycosides; n-hexadecanoic acid; hexadecanoic acid, ethyl ester; oleic acid; and 9,12-octadecadienoic acid, ethyl ester. After the corn silk cream product was formulated, the product demonstrated stability without phase separation. This research is beneficial for promoting effective ways to use agricultural waste while utilizing the antioxidant, anti-tyrosinase, and antibacterial activities of corn silk. Moreover, the use of technology and innovation to obtain high-value CS extract will benefit the development of commercial cosmetic products by providing safe, natural, and quality ingredients to the consumer. [ABSTRACT FROM AUTHOR]

More than 80% of the energy from fossil fuels is utilized in homes and industries. Increased use of fossil fuels not only depletes them but also contributes to global warming. By 2050, the usage of fossil fuels will be approximately lower than 80% than it is today. There is no yearly variation in the amount of CO2 in the atmosphere due to soil and land plants. Therefore, an alternative source of energy is required to overcome these problems. Biohydrogen is considered to be a renewable source of energy, which is useful for electricity generation rather than relying on harmful fossil fuels. Hydrogen can be produced from a variety of sources and technologies and has numerous applications including electricity generation, being a clean energy carrier, and as an alternative fuel. In this review, a detailed elaboration about different kinds of sources involved in biohydrogen production, various biohydrogen production routes, and their applications in electricity generation is provided. [ABSTRACT FROM AUTHOR]

The use of polysaccharides with good film-forming properties in food packaging systems is a promising area of research. Xanthan gum (XG), an extracellular polysaccharide, has many industrial uses, including as a common food additive (E415). It is an effective thickening agent, emulsifier, and stabilizer that prevents ingredients from separating. Nevertheless, XG-based polymer films have some disadvantages, such as poor mechanical properties and high hydrophilic features, which reduce their stability when exposed to moisture and create difficulties in processing and handling. Thus, the objective of this work was to stabilize a XG matrix by cross-linking it with glycerol diglycidyl ether, 1,4-butanediol diglycidyl ether, or epichlorohydrin below the freezing point of the reaction mixture. Cryogelation is an ecological, friendly, and versatile method of preparing biomaterials with improved physicochemical properties. Using this technique, XG-based cryogels were successfully prepared in the form of microspheres, monoliths, and films. The XG-based cryogels were characterized by FTIR, SEM, AFM, swelling kinetics, and compressive tests. A heterogeneous morphology with interconnected pores, with an average pore size depending on both the nature of the cross-linker and the cross-linking ratio, was found. The use of a larger amount of cross-linker led to both a much more compact structure of the pore walls and to a significant decrease in the average pore size. The uniaxial compression tests indicated that the XG-based cryogels cross-linked with 1,4-butanediol diglycidyl ether exhibited the best elasticity, sustaining maximum deformations of 97.67%, 90.10%, and 81.80%, respectively. [ABSTRACT FROM AUTHOR]

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol–gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems. [ABSTRACT FROM AUTHOR]

The intended circular economy for plastics envisages that they will be partially replaced by bio-based polymers in the future. In this work, the natural polyester polyhydroxybutyrate (PHB) was produced by Azohydromonas lata using cheese whey (CW) as a low-cost substrate. Initially, CW was evaluated as the sole carbon source for PHB production; it was found to be efficient and comparable to PHB production with pure sugars, such as saccharose or glucose, even when mild (with dilute acid) hydrolysis of cheese whey was performed instead of enzymatic hydrolysis. An additional series of experiments was statistically designed using the Taguchi method, and a dual optimization approach was applied to maximize the intracellular biopolymer content (%PHB, selected as a quantitative key performance indicator, KPI) and the weight average molecular weight of PHB (Mw, set as a qualitative KPI). Two different sets of conditions for the values of the selected bioprocess parameters were identified: (1) a carbon-to-nitrogen ratio (C/N) of 10 w/w, a carbon-to-phosphorous ratio (C/P) of 1.9 w/w, a dissolved oxygen concentration (DO) of 20%, and a residence time in the stationary phase (RT) of 1 h, resulting in the maximum %PHB (61.66% w/w), and (2) a C/N of 13.3 w/w, a C/P of 5 w/w, a DO of 20%, and a RT of 1 h, leading to the maximum Mw (900 kDa). A final sensitivity analysis confirmed that DO was the most significant parameter for %PHB, whereas C/N was the most important parameter for Mw. [ABSTRACT FROM AUTHOR]

Corn silk (CS) extracts are reported to contain flavonoids (appx. 59.65 mg quercetin/g), polysaccharides (appx. 58.75 w.%), steroids (appx. 38.3 × 10−3 to 368.9 × 10−3 mg/mL), polyphenols (appx. 77.89 mg/GAE/g) and other functional biological substances. This study investigated the antioxidant activity of corn silk extracts related to their functional compounds. The radical scavenging effect of corn silk extracts was evaluated by the spin-trapping electron paramagnetic resonance (EPR) technique, 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis(3-ethylbenzo-thiazoline-6-sulfonate) (ABTS•+) free radical measurement, ferric ion-reducing antioxidant power, and copper ion reductive capacity. It was found that the maturity stage of CS plant materials and the applied extraction procedure of their bioactive compounds have a profound effect on the radical scavenging capacity. Differences in the antioxidant activity of the studied corn silk samples based on their maturity were also confirmed. The strongest DPPH radical scavenging effect was observed for the corn silk mature stage (CS-M)stage (CS-MS) (65.20 ± 0.90)%, followed by the silky stage (CS-S) (59.33 ± 0.61)% and the milky stage (CS-M) (59.20 ± 0.92)%, respectively. In general, the final maturity stage (CS-MS) provided the most potent antioxidant effect, followed by the earliest maturity stage (CS-S) and the second maturity stage (CS-M). [ABSTRACT FROM AUTHOR]

Dextran methacrylate (Dex-MA) is a biodegradable polysaccharide derivative that can be cross-linked by ionizing radiation. It is therefore considered a potential replacement for synthetic hydrophilic polymers in current radiation technologies used for synthesizing hydrophilic cross-linked polymer structures such as hydrogels, mainly for medical applications. This work is focused on the initial steps of radiation-induced cross-linking polymerization of Dex-MA in water. Rate constants of two major transient water radiolysis products—hydroxyl radicals (•OH) and hydrated electrons ( e aq − )—with various samples of Dex-MA (based on 6–500 kDa dextrans of molar degree of substitution or DS with methacrylate groups up to 0.66) as well as non-substituted dextran were determined by pulse radiolysis with spectrophotometric detection. It has been demonstrated that these rate constants depend on both the molecular weight and DS; reasons for these effects are discussed and reaction mechanisms are proposed. Selected spectral data of the transient species formed by •OH- and e aq − -induced reactions are used to support the discussion. The kinetic data obtained in this work and their interpretation are expected to be useful for controlled synthesis of polysaccharide-based hydrogels and nanogels of predefined structure and properties. [ABSTRACT FROM AUTHOR]

Nanotechnology is used in a variety of scientific, medical, and research domains. It is significant to mention that there are negative and severe repercussions of nanotechnology on both individuals and the environment. The toxic effect of nanoparticles exerted on living beings is termed as nanotoxicity. Nanoparticles are synthesized by various methods such as chemical, biological, physical, etc. These nanoparticles' nanotoxicity has been observed to vary depending on the synthesis process, precursors, size of the particles, etc. Nanoparticles can enter the cell in different ways and can cause cytotoxic effects. In this review, the toxicity caused in the reproductive system and the role of the antioxidants against the nanotoxicity are briefly explained. [ABSTRACT FROM AUTHOR]

Metal nanoparticles, such as gold nanoparticles, silver nanoparticles, etc., have many benefits and have been in use for a very long time. Nevertheless, a number of concerns have been raised about the environmental impact and the possibility of exposure to various living systems at the moment. Thus, in this study, silver nanoparticles were synthesized by using plant gum from Bauhinia purpurea and characterization was done using UV—Visible Spectroscopy, Scanning Electron Microscopy, X—ray Diffraction, etc. To determine the accumulation and toxic effects caused by the nanoparticles, Eudrilus eugeniae, Danio rerio, and their embryos were exposed to the synthesized silver nanoparticles and evaluated using microscopic observation, histology, and Inductively Coupled Plasma Optical Emission Spectrometry (ICP—OES). [ABSTRACT FROM AUTHOR]

Ethanol and starch are the main products generated after the processing of corn via dry grinding and wet milling, respectively. Milling generates byproducts including stover, condensed distillers' solubles, gluten meal, and the dried distillers' grains with solubles (DDGS), which are sources of valuable compounds for industry including lignin, oil, protein, carotenoids, and phenolic compounds. This manuscript reviews the current research scenario on the valorization of corn milling byproducts with supercritical technology, as well as the processing strategies and the challenges of reaching economic feasibility. The main products recently studied were biodiesel, biogas, microcapsules, and extracts of enriched nutrients. The pretreatment of solid byproducts for further hydrolysis to produce sugar oligomers and bioactive peptides is another recent strategy offered by supercritical technology to process corn milling byproducts. The patents invented to transform corn milling byproducts include oil fractionation, extraction of undesirable flavors, and synthesis of structured lipids and fermentable sugars. Process intensification via the integration of milling with equipment that operates with supercritical fluids was suggested to reduce processing costs and to generate novel products. [ABSTRACT FROM AUTHOR]

Nanoparticles are potential candidates for wastewater treatment especially for the removal of heavy metals due to their strong affinity. Many biopolymers are used as adsorbents and encapsulation of nanoparticle onto them can increase their efficiency. In this study, SPIONs, alginate, and SPIONs incorporated on alginate beads have been synthesized and characterized both microscopically and spectroscopically. These were then used for the removal of chromium metal and the percentage of removal was evaluated using a batch adsorption study. The percent removal of chromium using SPIONs, alginate and alginate–SPIONs beads were recorded to be 93%, 91% and 94%, respectively. The adsorption of chromium using SPIONs and alginate–SPIONs beads followed the Tempkin isotherm, whereas adsorption of chromium metal by alginate beads was found to be homogeneous in nature and followed the Langmuir isotherm with an R2 value of 0.9784. An in-vivo study using Danio rerio as a model organism was done to examine the toxicity and the removal efficiency of the samples. It was observed that chromium water treated with alginate–SPIONs beads, which were removed after water treatment showed less damage to the fishes when compared to SPIONs and alginate beads treated with chromium water where the SPIONs and alginate beads were not removed after the treatment period. [ABSTRACT FROM AUTHOR]

A milk-processing plant was drafted as a distinctive staple industry amid the diverse field of industries. Dairy products such as yogurt, cheese, milk powder, etc., consume a huge amount of water not only for product processing, but also for sanitary purposes and for washing dairy-based industrial gear. Henceforth, the wastewater released after the above-mentioned operations comprises a greater concentration of nutrients, chemical oxygen demand, biochemical oxygen demand, total suspended solids, and organic and inorganic contents that can pose severe ecological issues if not managed effectively. The well-known processes such as coagulation–flocculation, membrane technologies, electrocoagulation, and other biological processes such as use of a sequencing batch reactor, upflow sludge anaerobic blanket reactor, etc., that are exploited for the treatment of dairy effluent are extremely energy-exhaustive and acquire huge costs in terms of fabrication and maintenance. In addition, these processes are not competent in totally removing various contaminants that exist in dairy effluent. Accordingly, to decrease the energy need, microbial electrochemical technologies (METs) can be effectively employed, thereby also compensating the purification charges by converting the chemical energy present in impurities into bioelectricity and value-added products. Based on this, the current review article illuminates the application of diverse METs as a suitable substitute for traditional technology for treating dairy wastewater. Additionally, several hindrances on the way to real-world application and techno-economic assessment of revolutionary METs are also deliberated. [ABSTRACT FROM AUTHOR]

Cereals have phytochemical compounds that can diminish the incidence of chronic diseases such as hypertension. The angiotensin-converting enzyme 2 (ACE2) participates in the modulation of blood pressure and is the principal receptor of the virus SARS-CoV-2. The inhibitors of the angiotensin-converting enzyme (ACE) and the block receptors of angiotensin II regulate the expression of ACE2; thus, they could be useful in the treatment of patients infected with SARS-CoV-2. The inferior peptides from 1 to 3 kDa and the hydrophobic amino acids are the best candidates to inhibit ACE, and these compounds are present in rice, corn, wheat, oats, sorghum, and barley. In addition, the vitamins C and E, phenolic acids, and flavonoids present in cereals show a reduction in the oxidative stress involved in the pathogenesis of hypertension. The influence of ACE on hypertension and COVID-19 has turned into a primary point of control and treatment from the nutritional perspective. The objective of this work was to describe the inhibitory effect of the angiotensin-converting enzyme that the bioactive compounds present in cereals possess in order to lower blood pressure and how their consumption could be associated with reducing the virulence of COVID-19. [ABSTRACT FROM AUTHOR]

Biodegradable nanoparticles (NPs) are preferred as drug carriers because of their effectiveness in encapsulating drugs, ability to control drug release, and low cytotoxicity. Although poly(lactide co-glycolide) (PLGA)-based NPs have been used for controlled release strategies, they have some disadvantages. This study describes an approach using biodegradable polyhydroxyalkanoate (PHA) to overcome these challenges. By varying the amount of PHA, NPs were successfully fabricated by a solvent evaporation method. The size range of the NPS ranged from 137.60 to 186.93 nm, and showed zero-order release kinetics of paclitaxel (PTX) for 7 h, and more sustained release profiles compared with NPs composed of PLGA alone. Increasing the amount of PHA improved the PTX loading efficiency of NPs. Overall, these findings suggest that PHA can be used for designing polymeric nanocarriers, which offer a potential strategy for the development of improved drug delivery systems for sustained and controlled release. [ABSTRACT FROM AUTHOR]

The use of fossil-based plastics has become unsustainable because of the polluting production processes, difficulties for waste management sectors, and high environmental impact. Polyhydroxyalkanoates (PHA) are bio-based biodegradable polymers derived from renewable resources and synthesized by bacteria as intracellular energy and carbon storage materials under nutrients or oxygen limitation and through the optimization of cultivation conditions with both pure and mixed culture systems. The PHA properties are affected by the same principles of oil-derived polyolefins, with a broad range of compositions, due to the incorporation of different monomers into the polymer matrix. As a consequence, the properties of such materials are represented by a broad range depending on tunable PHA composition. Producing waste-derived PHA is technically feasible with mixed microbial cultures (MMC), since no sterilization is required; this technology may represent a solution for waste treatment and valorization, and it has recently been developed at the pilot scale level with different process configurations where aerobic microorganisms are usually subjected to a dynamic feeding regime for their selection and to a high organic load for the intracellular accumulation of PHA. In this review, we report on studies on terrestrial and marine bacteria PHA-producers. The available knowledge on PHA production from the use of different kinds of organic wastes, and otherwise, petroleum-polluted natural matrices coupling bioremediation treatment has been explored. The advancements in these areas have been significant; they generally concern the terrestrial environment, where pilot and industrial processes are already established. Recently, marine bacteria have also offered interesting perspectives due to their advantageous effects on production practices, which they can relieve several constraints. Studies on the use of hydrocarbons as carbon sources offer evidence for the feasibility of the bioconversion of fossil-derived plastics into bioplastics. [ABSTRACT FROM AUTHOR]

Composites of Polyhydroxyalkanoates (PHAs) have been proven to have enhanced properties in comparison to the pure form of these polyesters. Depending on what polymer or material is added to PHAs, the enhancement of different properties is observed. Since PHAs are explored for usage in diverse fields, understanding what blends affect what properties would guide further investigations towards application. This article reviews works that have been carried out with composite variation for application in several fields. Some properties of PHAs are highlighted and composite variation for their modulations are explored. [ABSTRACT FROM AUTHOR]

Plant gums are bio-organic substances that are derived from the barks of trees. They are biodegradable and non-adverse complex polysaccharides that have been gaining usage in recent years due to a number of advantages they contribute to various applications. In this study, gum was collected from Moringa oleifera and Azadirachta indica trees, then dried and powdered. Characterizations of gum polysaccharides were performed using TLC, GC-MS, NMR, etc., and sugar molecules such as glucose and xylose were found to be present. Effects of the gums on Abelmoschus esculentus growth were observed through root growth, shoot growth, and biomass content. The exposure of the seeds to the plant gums led to bio stimulation in the growth of the plants. Poor quality soil was exposed to the gum polysaccharide, where the polysaccharide was found to improve soil quality, which was observed through soil analysis and SEM analysis of soil porosity and structure. Furthermore, the plant gums were also found to have bio-pesticidal activity against mealybugs, which showed certain interstitial damage evident through histopathological analysis. [ABSTRACT FROM AUTHOR]

A spinal cord injury (SCI) is one of the most devastating lesions, as it can damage the continuity and conductivity of the central nervous system, resulting in complex pathophysiology. Encouraged by the advances in nanotechnology, stem cell biology, and materials science, researchers have proposed various interdisciplinary approaches for spinal cord regeneration. In this respect, the present review aims to explore the most recent developments in SCI treatment and spinal cord repair. Specifically, it briefly describes the characteristics of SCIs, followed by an extensive discussion on newly developed nanocarriers (e.g., metal-based, polymer-based, liposomes) for spinal cord delivery, relevant biomolecules (e.g., growth factors, exosomes) for SCI treatment, innovative cell therapies, and novel natural and synthetic biomaterial scaffolds for spinal cord regeneration. [ABSTRACT FROM AUTHOR]

Since some synthetic insecticides cause damage to human health, compounds in plants can be viable alternatives to conventional synthetic pesticides. Dittrichia viscosa L. is a perennial Mediterranean plant known to possess biological activities, including insecticidal properties. The chemical composition of an essential oil (EOD) from D. viscosa, as well as its antioxidant, antimicrobial, and insecticidal effects on the cowpea weevil (Callosobruchus maculatus) were determined. Forty-one volatile compounds were identified in EOD, which accounted for 97.5% of its constituents. Bornyl acetate (41%) was a major compound, followed by borneol (9.3%), α-amorphene (6.6%), and caryophyllene oxide (5.7%). EOD exhibited significant antioxidant activity in all tests performed, with an IC50 of 1.30 ± 0.05 mg/mL in the DPPH test and an EC50 equal to 36.0 ± 2.5 mg/mL in the FRAP assay. In the phosphor-molybdenum test, EOD results ranged from 39.81 ± 0.7 to 192.1 ± 0.8 mg AAE/g E. EOD was active on E. coli (9.5 ± 0.5 mm), S. aureus (31.0 ± 1.5 mm), C. albicans (20.4 ± 0.5 mm), and S. cerevisiae (28.0 ± 1.0 mm), with MICs ranging from 0.1 mg/mL to 3.3 mg/mL. We found that 1 µL of EOD caused 97.5 ± 5.0% insect mortality after 96 h in the inhalation test and 60.0 ± 8.3% in the ingestion assay. The median lethal concentration (LC50) was 7.8 ± 0.3 μL EO/L, while the effective concentration in the ingestion test (LC50) was 15.0 ± 2.1 μL EO/L. We found that 20 µL of EOD caused a reduction of more than 91% of C. maculatus laid eggs. [ABSTRACT FROM AUTHOR]

Modern biomedicine aims to develop integrated solutions that use medical, biotechnological, materials science, and engineering concepts to create functional alternatives for the specific, selective, and accurate management of medical conditions. In the particular case of tissue engineering, designing a model that simulates all tissue qualities and fulfills all tissue requirements is a continuous challenge in the field of bone regeneration. The therapeutic protocols used for bone healing applications are limited by the hierarchical nature and extensive vascularization of osseous tissue, especially in large bone lesions. In this regard, nanotechnology paves the way for a new era in bone treatment, repair and regeneration, by enabling the fabrication of complex nanostructures that are similar to those found in the natural bone and which exhibit multifunctional bioactivity. This review aims to lay out the tremendous outcomes of using inorganic nanoparticles in bone healing applications, including bone repair and regeneration, and modern therapeutic strategies for bone-related pathologies. [ABSTRACT FROM AUTHOR]

Drug-eluting stents (DES) are a main interventional therapeutic instrument to treat coronary diseases. Degradable polymers such as polylactic acid (PLA) for coatings that only degrade into small molecules in human bodies have been developed for coating polymers, but most coatings often lack ductility and can be easily peeled off from the stents after balloon expansion. In this study, biodegradable poly 3-hydroxybutyrate 4-hydroxybutyrate (P34HB) with good ductility was proposed to be a latent polymer for drug-eluting coatings on the stents. Using P34HB-1 (4HB% = 1%wt, Mw: 225,000) and P34HB-10 (4HB% = 10%wt, Mw: 182,000) as two candidates, both P34HB-1 and P34HB-10 exhibited excellent solubility in CHCl3. Their drug solutions remained highly stable and did not become turbid over a period of 48 h, and were conducive to batch preparation of uniform drug coatings. Drug coatings made by both P34HB-1 and P34HB-10 on the stents were almost complete before and after dilation by balloon owing to their excellent adhesion and extrusion resistance properties. Furthermore, both P34HB-1 and P34HB-10 had excellent biocompatibility in cytotoxicity and hemolysis tests. However, P34HB-1 drug coatings showed better drug release control than P34HB-10 drug coatings and Firebird2®, indicating that P34HB-1 is more suitable for a latent coating polymer of coronary stents. [ABSTRACT FROM AUTHOR]

Cancer continues to represent a global health concern, imposing an ongoing need to research for better treatment alternatives. In this context, nanomedicine seems to be the solution to existing problems, bringing unprecedented results in various biomedical applications, including cancer therapy, diagnosing, and imaging. As numerous studies have uncovered the advantageous properties of various nanoscale metals, this review aims to present metal-based nanoparticles that are most frequently employed for cancer applications. This paper follows the description of relevant nanoparticles made of metals, metal derivatives, hybrids, and alloys, further discussing in more detail their potential applications in cancer management, ranging from the delivery of chemotherapeutics, vaccines, and genes to ablative hyperthermia therapies and theranostic platforms. [ABSTRACT FROM AUTHOR]

Microbial pathogens that cause severe infections and are resistant to drugs are simultaneously becoming more active. This urgently calls for novel effective antibiotics. Organisms from extreme environments are known to synthesize novel bioprospecting molecules for biomedical applications due to their peculiar characteristics of growth and physiological conditions. Antimicrobial developments from hypersaline environments, such as lagoons, estuaries, and salterns, accommodate several halophilic microbes. Salinity is a distinctive environmental factor that continuously promotes the metabolic adaptation and flexibility of halophilic microbes for their survival at minimum nutritional requirements. A genetic adaptation to extreme solar radiation, ionic strength, and desiccation makes them promising candidates for drug discovery. More microbiota identified via sequencing and 'omics' approaches signify the hypersaline environments where compounds are produced. Microbial genera such as Bacillus, Actinobacteria, Halorubrum and Aspergillus are producing a substantial number of antimicrobial compounds. Several strategies were applied for producing novel antimicrobials from halophiles including a consortia approach. Promising results indicate that halophilic microbes can be utilised as prolific sources of bioactive metabolites with pharmaceutical potentialto expand natural product research towards diverse phylogenetic microbial groups which inhabit salterns. The present study reviews interesting antimicrobial compounds retrieved from microbial sources of various saltern environments, with a discussion of their potency in providing novel drugs against clinically drug-resistant microbes. [ABSTRACT FROM AUTHOR]

Plant-derived essential oils (EOs) represent a green alternative to conventional antimicrobial agents in food preservation. Due to their volatility and instability, their application is dependent on the development of efficient encapsulation strategies allowing their protection and release control. Encapsulation in Polyhydroxyalkanoate (PHA)-based nanoparticles (NPs) addresses this challenge, providing a biodegradable and biobased material whose delivery properties can be tuned by varying polymer composition. In this work, EO from Mexican oregano was efficiently encapsulated in Polyhydroxybutyrate (PHB) and Poly-3-hydroxybutyrate-co-hydroxyhexanoate (PHB-HHx)-based NPs by solvent evaporation technique achieving high encapsulation efficiency, (>60%) and loading capacity, (about 50%). The obtained NPs displayed a regular distribution with a size range of 150–210 nm. In vitro release studies in food simulant media were fitted with the Korsmeyer–Peppas model, indicating diffusion as the main factor controlling the release. The cumulative release was affected by the polymer composition, possibly related to the more amorphous nature of the copolymer, as confirmed by WAXS and DSC analyses. Both the EO-loaded nanosystems displayed antimicrobial activity against Micrococcus luteus, with PHB-HHx-based NPs being even more effective than the pure EO. The results open the way to the effective exploitation of the developed nanosystems in active packaging. [ABSTRACT FROM AUTHOR]

In this study, five keratinolytic bacteria were isolated from poultry farm waste of Eastern Province, Saudi Arabia. The highest keratinase activity was obtained at 40–45 °C, pH 8–9, feather concentration 0.5–1%, and using white chicken feather as keratin substrate for 72 h. Enhancement of keratinase activity through physical mutagen UV radiation and/or chemical mutagen ethyl methanesulfonate (EMS) resulted in five mutants with 1.51–3.73-fold increased activity over the wild type. When compared with the wild type, scanning electron microscopy validated the mutants' effectiveness in feather degradation. Bacterial isolates are classified as members of the S8 family peptidase Bacillus cereus group based on sequence analysis of the 16S rRNA and keratinase genes. Interestingly, keratinase KerS gene shared 95.5–100% identity to keratinase, thermitase alkaline serine protease, and thermophilic serine protease of the B. cereus group. D137N substitution was observed in the keratinase KerS gene of the mutant strain S13 (KerS13uv+ems), and also seven substitution variations in KerS26 and KerS26uv of strain S26 and its mutant S26uv. Functional analysis revealed that the subtilisin-like serine protease domain containing the Asp/His/Ser catalytic triad of KerS gene was not affected by the predicted substitutions. Prediction of physicochemical properties of KerS gene showed instability index between 17.5–19.3 and aliphatic index between 74.7–75.7, which imply keratinase stability and significant thermostability. The docking studies revealed the impact of substitutions on the superimposed structure and an increase in binding of mutant D137N of KerS13uv+ems (affinity: −7.17; S score: −6.54 kcal/mol) and seven mutants of KerS26uv (affinity: −7.43; S score: −7.17 kcal/mol) compared to the wild predicted structure (affinity: −6.57; S score: −6.68 kcal/mol). Together, the keratinolytic activity, similarity to thermostable keratinases, and binding affinity suggest that keratinases KerS13uv+ems and KerS26uv could be used for feather processing in the industry. [ABSTRACT FROM AUTHOR]