Search

The cider market has been significantly expanding and gaining momentum in Eastern Europe. As such, the aim of this study was to obtain sparkling cider via the Champenoise method using two Romanian apple varieties (Topaz and Red Topaz) alongside the employment of two fermentations. Four yeast strains were used in the first fermentation, while encapsulated Saccharomyces cerevisiae was used in the second fermentation. The resulting cider was subjected to a comprehensive investigation to quantitatively determine the carbohydrates, organic acids, volatile and phenolic compounds, and amino acids from all the cider samples. A trained panel evaluated the sensory profile of the samples, and a chemometric analysis was used to interpret the data. Secondary fermentation increased the accumulation of malic acid and lactic acid, as well as the volatile profile complexity. The total polyphenol content in the sparkling cider samples increased by almost 20% in the S. cerevisiae sample and over 217% in the P. kluyveri + S. cerevisiae sample compared to the base cider. Additionally, studying the production and consumption trends of sparkling cider offers valuable insights for both producers and consumers. By understanding consumer preferences and refining production techniques, the industry can deliver higher-quality products that better align with market demands. [ABSTRACT FROM AUTHOR]

This study examined the effect of simultaneous fermentations of Saccharomyces cerevisiae and Pichia kluyveri, Lactobacillus plantarum and Oenococcus oeni on the chemical composition of apple cider from two apple varieties—Topaz and Red Topaz. Analytical techniques (HPLC-RID, HPLC-VWD, GC/MS, GC/FID, HPLC-DAD ESI+) were employed to analyze glucides, organic acids, volatile compounds, amino acids and phenolic compounds, respectively. Statistical analysis and and PCA were conducted to assess the correlations among samples based on the compounds identified. In the mixed fermentations, such as Saccharomyces cerevisiae + Lactobacillus plantarum and Saccharomyces cerevisiae + Oenococcus oeni, the amount of lactic acid was higher compared to the other samples, thus proving the effectiveness of malolactic fermentation simultaneous to alcoholic fermentation. The fermentation of Saccharomyces cerevisiae + Pichia kluyveri resulted in the formation of greater amounts of certain volatile compounds. Moreover, the sensory analysis revealed that Saccharomyces cerevisiae + Pichia kluyveri distinguished apple-like, fruity and floral notes. This study suggests that the simultaneous inoculation of Saccharomyces and non-Saccharomyces yeasts results in a more complex-flavored cider. The mixed fermentation of yeast and lactic acid bacteria is a sustainable method given the shortened fermentation duration and can be successfully applied in the cider industry. [ABSTRACT FROM AUTHOR]

The resurgence of mead, a honey-based fermented beverage, is attributed to the increasing consumption of fermented foods and beverages, driven by its distinct flavors and perceived health benefits. This study investigates the influence of different yeast strains, namely Saccharomyces cerevisiae var. bayanus, and Torulaspora delbrueckii, on the volatile and phenolic compounds of these beverages. Analytical techniques, including HPLC-DAD and GS/MS, were employed to analyze the chemical composition of the beverages. ANOVA analysis of variance was conducted to assess differences in the volatile and phenolic compounds. The findings reveal that yeast selection significantly impacts the chemical profiles of the beverages. Saccharomyces cerevisiae fermentation preserves rosehip-specific flavonoids and phenolic acids. Sequential fermentation with Torulaspora delbrueckii demonstrated proficiency in generating esters, contributing to fruity and floral aromas in the beverages. This study investigates the importance of yeast selection in shaping the chemical composition of rosehip mead, providing insights into the distinct characteristics conferred by different yeast strains. By optimizing yeast selection and fermentation techniques, the overall quality and diversity of these beverages can be enhanced. [ABSTRACT FROM AUTHOR]

The food and beverage market has become broader due to globalization and consumer claims. Under the umbrella of consumer demands, legislation, nutritional status, and sustainability, the importance of food and beverage safety must be decisive. A significant sector of food production is related to ensuring fruit and vegetable conservation and utilization through fermentation. In this respect, in this review, we critically analyzed the scientific literature regarding the presence of chemical, microbiological and physical hazards in fruit-based fermented beverages. Furthermore, the potential formation of toxic compounds during processing is also discussed. In managing the risks, biological, physical, and chemical techniques can reduce or eliminate any contaminant from fruit-based fermented beverages. Some of these techniques belong to the technological flow of obtaining the beverages (i.e., mycotoxins bound by microorganisms used in fermentation) or are explicitly applied for a specific risk reduction (i.e., mycotoxin oxidation by ozone). Providing manufacturers with information on potential hazards that could jeopardize the safety of fermented fruit-based drinks and strategies to lower or eliminate these hazards is of paramount importance. [ABSTRACT FROM AUTHOR]

Brewers' spent grain (BSG), the main by-product of the brewing industry, is a rich source of minerals and water-soluble vitamins such as thiamine, pyridoxine, niacin, and cobalamin. Bioaccessibility through in vitro digestion is an important step toward the complete absorption of minerals and B group vitamins in the gastrointestinal system. Inductively coupled plasma optical emission spectrometry (ICP-OES) together with inductively coupled plasma quadrupole mass spectrometry (ICP-MS) was used for the quantification of the macro- and micro-minerals. An ultra-high performance liquid chromatography (UHPLC) system coupled with a diode array detector (DAD) was used for B group vitamin identification. Four different industrial BSG samples were used in the present study, with different percentages of malted cereals such as barley, wheat, and degermed corn. Calcium's bioaccessibility was higher in the BSG4 sample composed of 50% malted barley and 50% malted wheat (16.03%), while iron presented the highest bioaccessibility value in the BSG2 sample (30.03%) composed of 65% Pale Ale malt and 35% Vienna malt. On the other hand, vitamin B1 had the highest bioaccessibility value (72.45%) in the BSG3 sample, whilst B6 registered the lowest bioaccessibility value (16.47%) in the BSG2 sample. Therefore, measuring the bioaccessibilty of bioactive BSG compounds before their further use is crucial in assessing their bioavailability. [ABSTRACT FROM AUTHOR]

Cereal processing generates around 12.9% of all food waste globally. Wheat bran, wheat germ, rice bran, rice germ, corn germ, corn bran, barley bran, and brewery spent grain are just a few examples of wastes that may be exploited to recover bioactive compounds. As a result, a long-term strategy for developing novel food products and ingredients is encouraged. High-value compounds like proteins, essential amino acids, essential fatty acids, ferulic acid, and other phenols, tocopherols, or β-glucans are found in cereal by-products. This review aims to provide a critical and comprehensive overview of current knowledge regarding the bioactive compounds recovered from cereal by-products, emphasizing their functional values and potential human health benefits. [ABSTRACT FROM AUTHOR]

The presence of physical, chemical, or microbiological contaminants in beer represents a broad and worthy problem with potential implications for human health. The expansion of beer types makes it more and more appreciated for the sensorial properties and health benefits of fermentation and functional ingredients, leading to significant consumed quantities. Contaminant sources are the raw materials, risks that may occur in the production processes (poor sanitation, incorrect pasteurisation), the factory environment (air pollution), or inadequate (ethanol) consumption. We evaluated the presence of these contaminants in different beer types. This review covers publications that discuss the presence of bacteria (Lactobacillus, Pediococcus), yeasts (Saccharomyces, Candida), moulds (Fusarium, Aspergillus), mycotoxins, heavy metals, biogenic amines, and micro- and nano-plastic in beer products, ending with a discussion regarding the identified gaps in current risk reduction or elimination strategies. [ABSTRACT FROM AUTHOR]

The influence of the addition of oak chips and barrel ageing on basic wine parameters and volatile compounds of Chardonnay wines has been studied. Chardonnay wines were obtained by the traditional wine-making process. Oak chips (4 g/L—non-toasted and light toasted) were added at the final stage of the winemaking process for ageing 1, 2 and 3 months, respectively. Also, the control wine was aged in non-toasted barrels for the same period of time. Following Liquid-liquid extraction-gas chromatography-mass spectrometry analysis, alcohols, esters, fatty acids, lactones, and phenolic compounds were identified and quantified. The light toasted wine was clearly separated by phenolic compounds (vanillin, p-vinyl guaiacol and acetovanillone). The floral aroma supplied by 2-phenylethanol was slowly increased by ageing with odor activity values (OAV) higher in aged samples than control wine (1.07). The vanilla scent could be easily perceived in all aged samples, mainly for light toasted chip-treated samples with OAV values between 2.30 and 2.37. After 3 months, the volatile compounds of wine from non-toasted medium (chips and barrels) were almost similar from the volatile profile point of view. This could have economic and vinification management implications since oak barrels are expensive and the wine oak barrel aging is a long process. All wines studied in this research can provide a viable alternative to young varietal wines. [ABSTRACT FROM AUTHOR]

It is only recently that fermentation has been facing a dynamic revival in the food industry. Fermented fruit-based beverages are among the most ancient products consumed worldwide, while in recent years special research attention has been granted to assess their functionality. This review highlights the functional potential of alcoholic and non-alcoholic fermented fruit beverages in terms of chemical and nutritional profiles that impact on human health, considering the natural occurrence and enrichment of fermented fruit-based beverages in phenolic compounds, vitamins and minerals, and pro/prebiotics. The health benefits of fruit-based beverages that resulted from lactic, acetic, alcoholic, or symbiotic fermentation and specific daily recommended doses of each claimed bioactive compound were also highlighted. The latest trends on pre-fermentative methods used to optimize the extraction of bioactive compounds (maceration, decoction, and extraction assisted by supercritical fluids, microwave, ultrasound, pulsed electric fields, high pressure homogenization, or enzymes) are critically assessed. As such, optimized fermentation processes and post-fermentative operations, reviewed in an industrial scale-up, can prolong the shelf life and the quality of fermented fruit beverages. [ABSTRACT FROM AUTHOR]

The scientific literature is rich in investigations on the presence of various contaminants in biscuits, and of articles aimed at proposing innovative solutions for their control and prevention. However, the relevant information remains fragmented. Therefore, the objective of this work was to review the current state of the scientific literature on the possible contaminants of biscuits, considering physical, chemical, and biological hazards, and making a critical analysis of the solutions to reduce such contaminations. The raw materials are primary contributors of a wide series of contaminants. The successive processing steps and machinery must be monitored as well, because if they cannot improve the initial safety condition, they could worsen it. The most effective mitigation strategies involve product reformulation, and the use of alternative baking technologies to minimize the thermal load. Low oxygen permeable packaging materials (avoiding direct contact with recycled ones), and reformulation are effective for limiting the increase of contaminations during biscuit storage. Continuous monitoring of raw materials, intermediates, finished products, and processing conditions are therefore essential not only to meet current regulatory restrictions but also to achieve the aim of banning dietary contaminants and coping with related diseases. [ABSTRACT FROM AUTHOR]

Kefiran is an exopolysaccharide classified as a heteropolysaccharide comprising glucose and galactose in equimolar quantities, and it is classified as a water-soluble glucogalactan. This work aimed to investigate the effect of different extraction conditions of kefiran on the structural and physical properties of the edible films obtained. Fourier-transform infrared spectroscopy and scanning electron microscopy were performed, together with a determinations of moisture content, solubility, water vapor permeability and degree of swelling. The kefiran films presented values of the water vapor permeability between 0.93 and 4.38 × 10−11 g/m.s.Pa. These results can be attributed to the development of a more compact structure, where glycerol had no power to increase the free volume and the water vapor diffusion through their structure. The possible conformational changes in the kefiran film structure, due to the interspersing of the plasticizers and water molecules that they absorb, could be the reason for producing flexible kefiran films in the case of using glycerol as a plasticizer at 7.5% w/w. Moreover, it was observed that the extraction conditions are a significant factor in the properties of these films and their food technology applications. [ABSTRACT FROM AUTHOR]

Given apple, an easily adapted culture, and a large number of apple varieties, the production of apple cider is widespread globally. Through the fermentation process, a series of chemical changes take place depending on the apple juice composition, type of microorganism involved and technology applied. Following both fermentations, alcoholic and malo-lactic, and during maturation, the sensory profile of cider changes. This review summarises the current knowledge about the influence of apple variety and microorganisms involved in cider fermentation on the sensory and volatile profiles of cider. Implications of both Saccharomyces, non-Saccharomyces yeast and lactic acid bacteria, respectively, are discussed. Also are presented the emerging technologies applied to cider processing (pulsed electric field, microwave extraction, enzymatic, ultraviolet and ultrasound treatments, high-pressure and pulsed light processing) and the latest trends for a balanced production in terms of sustainability, authenticity and consumer preferences. [ABSTRACT FROM AUTHOR]

The current pharmacological agents advised for the management of diabetes as well as cardiovascular and hepatic diseases are subject to numerous studies for safety and efficacy. Therefore, it is worth looking into alternative therapeutic aids such as natural products of medicinal plants. By a broad review of in vitro and in vivo studies on the various dandelion, chicory, and mulberry extracts, this work highlights their bioactive compounds and therapeutic action when used as a prevention and management aid in public health such as diabetes, cardiovascular disease, and hepatic disorders like non-alcoholic steatohepatitis. Natural products of dandelion leaves and root extracts can suppress the development of liver cancer, decrease insulin resistance, and suppress total triglyceride and cholesterol levels. Recent studies on mulberry leaves extracts indicated that they could decrease palmitic acid-induced lipotoxicity, increase total cholesterol and bile acid excretion, improve superoxide dismutase expression, and improve insulin resistance. Chicory root extracts boost satiety, reverse insulin resistance, and augment lipid metabolism thanks to their contents in chicoric acid, chlorogenic acid, and polysaccharides. Taraxacum officinale L., Morus nigra L., and Cichorium intybus L. present hepatoprotective, anti-inflammatory, antioxidant, hypolipidemic, and hypoglycemic activities and are shown to be advantageous in the management of obesity, dyslipidemia, Type 2 diabetes, and non-alcoholic fatty liver diseases. These plants are commonly available in the European spontaneous flora and more attention could be paid to their natural products. [ABSTRACT FROM AUTHOR]

Consumers' demand for functional fermented food that can fulfill nutritional needs and help maintain a balanced diet while also having a positive impact on one's health status is increasing all over the world. Thus, healthy choices could include beverages with nutrients and bioactive compounds which can be used as an effective disease-prevention strategy. Regular beer has certain health benefits which inspire further research with the prospect of obtaining special functional beers with little or no alcohol content. As observed, the special beer market remains highly dynamic and is predicted to expand even further. Therefore, brewers need to keep up with the consumers' interests and needs while designing special beers, namely nonalcoholic beers (NABs), low-alcohol beers (LABs), and craft beers (CBs). Thus, understanding the potential uses of bioactive compounds in special beer, the wide range of therapeutic effects, and the possible mechanisms of action is essential for developing healthier beverages. This review aimed to evaluate the nutritional features of special beers, and their proven or potential beneficial actions on one's health status and in preventing certain diseases. [ABSTRACT FROM AUTHOR]

Beer is the most consumed alcoholic beverage in the world and the third most popular beverage after water and tea. Emerging health-oriented lifestyle trends, demographics, stricter legislation, religious prohibitions, and consumers' preferences have led to a strong and steady growth of interest for non-alcoholic beers (NABs), low-alcohol beers (LABs), as well for craft beers (CBs). Conventional beer, as the worlds most consumed alcoholic beverage, recently gained more recognition also due to its potential functionality associated with the high content of phenolic antioxidants and low ethanol content. The increasing attention of consumers to health-issues linked to alcohol abuse urges breweries to expand the assortment of conventional beers through novel drinks concepts. The production of these beers employs several techniques that vary in performance, efficiency, and usability. Involved production technologies have been reviewed and evaluated in this paper in terms of efficiency and production costs, given the possibility that craft brewers might want to adapt them and finally introduce novel non-alcoholic drinks in the market. [ABSTRACT FROM AUTHOR]

Fermentation continues to be the most common biotechnological tool to be used in cereal-based beverages, as it is relatively simple and economical. Fermented beverages hold a long tradition and have become known for their sensory and health-promoting attributes. Considering the attractive sensory traits and due to increased consumer awareness of the importance of healthy nutrition, the market for functional, natural, and non-alcoholic beverages is steadily increasing all over the world. This paper outlines the current achievements and technological development employed to enhance the qualitative and nutritional status of non-alcoholic fermented cereal beverages (NFCBs). Following an in-depth review of various scientific publications, current production methods are discussed as having the potential to enhance the functional properties of NFCBs and their safety, as a promising approach to help consumers in their efforts to improve their nutrition and health status. Moreover, key aspects concerning production techniques, fermentation methods, and the nutritional value of NFCBs are highlighted, together with their potential health benefits and current consumption trends. Further research efforts are required in the segment of traditional fermented cereal beverages to identify new potentially probiotic microorganisms and starter cultures, novel ingredients as fermentation substrates, and to finally elucidate the contributions of microorganisms and enzymes in the fermentation process. [ABSTRACT FROM AUTHOR]

The aim of this work was to compare the variations of alcohols compounds in white wine Muscat Ottonel variety aged in the presence of untoasted oak chips, toasted oak chips and untoasted barrel, considering three ageing periods—30, 60, and 90 days. The liquid-liquid extraction and gas chromatography coupled to mass spectrometry were used to compare the concentrations of the volatile constituents of Muscat Ottonel wines. A total of 51 volatile compounds were quantified. Alcohols, terpenic and carboxylic acids decreased with ageing time, whereas esters, lactones, and phenolic compounds increased due esterification processes. The chips toast level, method, and duration of ageing, significantly influenced the content of aromatic compounds. Partial least squares regression (PLS-R) clearly discriminated the initial wine and also the wines aged with toasted and untoasted medium. The compounds (alcohols and terpenes) that impart distinctive aroma of Muscat Ottonel were enhanced by untoasted medium. Light toasted oak chips enhanced wood volatile components (acetovanillone and p-vinyl guaiacol). This study provides important scientific results on the ageing of Muscat Ottonel wines with practical economic benefits to winemakers. Alternative less expensive ageing methods and improved control on the wood components extraction process, may contribute to obtaining high-quality wines. [ABSTRACT FROM AUTHOR]

The traditional perception that legumes would not be suitable for extrusion cooking is now completely outdated. In recent years, an increasing number of studies have been conducted to assess the behavior of various types of legume flours in extrusion cooking, proving that legumes have excellent potential for the production of extruded ready-to-eat foods by partially or totally replacing cereals. This review identifies the optimal processing conditions for legume-based and legume-added extruded foods, which allow the improvement of the expansion ratio and give the extrudates the spongy and crisp structure expected by consumers. In particular, the effect of the individual processing parameters on the physical-chemical and nutritional properties of the final product is highlighted. The extrusion cooking process, indeed, has a positive effect on nutritional characteristics, because it induces important modifications on starch and proteins, enhancing their digestibility, and reduces the content of trypsin inhibitors, lectins, phytic acid, and tannins, typically present in legumes. Therefore, the extrusion of legume flours is a viable strategy to improve their nutritional features while reducing home preparation time, so as to increase the consumption of these sustainable crops. [ABSTRACT FROM AUTHOR]