Search

In this paper, the design of a self-developed EMP simulator with a 5 m height and an inverted conducting mono-cone antenna with a cone half-angle of 32° is introduced. The experimental region of the simulator is a circular area of 25 m in diameter around the cone vertex. Two feeding modes, feed-in over the ground and feed-in under the ground, are realized by two different high-voltage pulse sources. It can be concluded through radiation field testing that the radiation field waveform generated by the simulator has a rise time of 2–3 ns and a half-width of about 25 ns, meeting the specifications of the EMP experimental waveform in the IEC61000-2-9 standard. Meanwhile, the differences between the engineering implementation of the simulator and its ideal structure during the design process can lead to some distortion issues in the antenna radiation characteristics and the electromagnetic radiation field it generates. The radiation field waveform and the distribution of the EMP field generated by the simulator under different feeding methods, antenna wire quantities, antenna end processing methods, and different antenna resistive loading were studied, and the changes in the radiation field waveform and field distribution with different angles and distances of the monitoring point were analyzed. Based on the measurement results, the radiation characteristics of the antenna and the factors that affect the waveform of the field were studied and analyzed. Through the aforementioned work, a comprehensive understanding of the performance, radiation characteristics, and engineering factors affecting the electromagnetic environment generated by the simulator has been obtained. On this basis, the parameters of the antenna wire quantity, antenna end processing method, and test point position of the designed simulator were reconfirmed and optimized. In summary, this work has important reference significance for mastering the development technology of such simulators, understanding their antenna radiation characteristics, and conducting EMP-related assessments and effect experiments in the future. [ABSTRACT FROM AUTHOR]

Image segmentation approaches have been utilized to determine the particle size distribution of crushed ores in the past decades. It is not possible to deploy large and high-powered computing equipment due to the complex working environment, so existing algorithms are difficult to apply in practical engineering. This article presents a novel efficient and lightweight framework for ore image segmentation to discern full and independent ores. First, a lightweight backbone is introduced for feature extraction while reducing computational complexity. Then, we propose a compact pyramid network to process the data obtained from the backbone to reduce unnecessary semantic information and computation. Finally, an optimized detection head is proposed to obtain the feature to maintain accuracy. Extensive experimental results demonstrate the effectiveness of our method, which achieves 40 frames per second on our new ore image dataset with a very small model size. Meanwhile, our method maintains a high level of accuracy—67.68% in A P 50 b o x and 46.73% in A P 50 m a s k —compared with state-of-the-art approaches. [ABSTRACT FROM AUTHOR]

In order to further improve the insulation performance of fiber reinforce plastic (FRP) materials used in electromagnetic pulse (EMP) simulators, the flashover characteristics of FRP materials with different surface roughness and groove, i.e., those who are easily achieved and have a prominent effect, are investigated in 0.1 MPa SF6 under nanosecond pulse voltage with a rise time of 20–30 ns. The experimental results show that surfaces with different roughness have no significant influence on the flashover voltages of the FRP insulators, and both the convex grooves made of FRP and the convex grooves with nylon rings inlaid to form projections can improve the surface flashover voltage of epoxy FRP insulators under nanosecond pulse, in which the effect of the former surface is more obvious. For the insulators with convex grooves made of FRP, it is found that the root of the FRP protrusions breaks down after a number of shots with the occurrence of carbonization channels and spots, which is nonexistent for the nylon projections. Combined with the test results of surface characteristics, the surface roughness and the secondary electron emission yield (SEEY) are not key factors of flashover characteristics in SF6 under nanosecond pulse, arguably due to the fact that the energy needed for an incident electron to ionize an SF6 molecule is lower than that to excite two secondary electrons. Hence, the flashover performance cannot be improved by adjusting the surface roughness, and the flashover channel is principally governed by the macroscopic distribution of electrical field which can be changed by the convex groove. Breakdown phenomena of FRP protrusions indicate that the bulk insulation performance of resin FRP is weaker compared to pure resin because of its composite structure, as well as the impurities and voids introduced in the manufacturing process. The results are instructive for the design of FRP insulation structures in the compact EMP simulator. [ABSTRACT FROM AUTHOR]