Search

A simplified column-buckling model is developed to understand the buckling mechanism of thin-walled strips restrained by uniform lateral pressure in the milling process. The strip is simplified as two rigid columns connected by a rotation spring, resting on a smooth surface, restrained by a uniform pressure and loaded by an axial force. Two loading cases are considered, i.e., the dead load and the follower load. Analytical solutions for the post-buckling responses of the two cases are derived based on the energy method. The minimum buckling force, Maxwell force and stability conditions for the two cases are established. It is demonstrated that the application of higher uniform pressure increases the minimum buckling force for the column and thus makes the column less likely to buckle. For the same pressure level, the dead load is found to be more effective than the follower load in suppressing the buckling of the system. The effect of initial geometric imperfection is also investigated, and the imperfection amplitude and critical restraining pressure that prevent buckling are found to be linearly related. The analytical results are validated by finite element simulations. This analytical model reveals the buckling mechanism of strips under lateral pressure restraint, which cannot be explained by the conventional bifurcation buckling theory, and provides a theoretical foundation for buckling-prevention strategies during the milling process of thin-walled strips, plates and shells commonly encountered in aerospace or automotive industries. [ABSTRACT FROM AUTHOR]

This paper examines the relationship between income inequality and consumption, utilizing panel data from rural China over a span of four years to validate the application of relative income theory in the domain of food consumption. Food consumption represents a significant portion of expenditures for the low-income demographic and is of vital importance to China's food security and agricultural development. To ascertain the impact of income inequality on food consumption, this paper employs a bi-directional fixed-effects model, a mediation effect model, and machine learning causal analysis methods. Utilizing four years of rural resident survey data from the China Health and Nutrition Survey database, the study empirically tests the effect of income inequality on various types of food consumption, the channels through which it operates, and the heterogeneity among different income groups and educational backgrounds. The findings indicate that (1) income inequality within rural communities positively influences food consumption, and this conclusion remains robust under endogeneity treatment and robustness checks, positively affecting the transformation of food consumption and healthy intake; (2) income inequality among rural residents promotes food consumption through two mediating channels: the "demonstration effect" and the "ratchet effect;" (3) the impact of income inequality on food consumption exhibits heterogeneity among rural residents of different income levels and educational backgrounds. [ABSTRACT FROM AUTHOR]

Large-dimension complex integral thin-shell components are widely used in advanced transportation equipment. However, with the dimensional limitations of raw blanks and the manufacturing process, there are inhomogeneous geometric and mechanical properties at welded joints after welding, which have a significant effect on the subsequent forming process. Therefore, in this paper, the microstructure of welded joints with a sharp property change was accurately characterized by the proposed isothermal treatment method using the BR1500HS welded tube as an example. In addition, an accurate constitutive model of welded tubes was established to predict the deformation behavior. Firstly, the heat-treated specimens were subjected to uniaxial tensile tests and the stress–strain curves under different heat treatment conditions were obtained. Then, the continuous change in flow stress in the direction of the base metal zone, the heat-affected zone and the weld zone was described by the relationship between the microhardness, flow stress and center angle of the welded tube. Using such a method, a continuous constitutive model of welded tubes has been established. Finally, the constitutive model was compiled into finite-element software as a user material subroutine (VUHARD). The reliability of the established constitutive model was verified by simulating the free hydro-bulging process of welded tubes. The results indicated that the continuous constitutive model can well describe the deformation response during the free hydro-bulging process, and accurately predicted the equivalent strain distribution and thickness thinning rate. This study provides guidance in accurately predicting the plastic deformation behavior of welded tubes and its application in practice in hydroforming industries. [ABSTRACT FROM AUTHOR]

Many laboratory studies have shown that particle size distribution (PSD) affects the liquefaction susceptibility of granular materials. However, few studies have focused on the impact of PSD on coral particles. In this study, two different soil families were prepared: one with three levels of mean particle size (D50) with identical uniformity coefficient (Cu)and the other with four levels of Cu with the same D50 for coral gravelly soils. In addition, a series of undrained cyclic triaxial tests were conducted on coral gravelly particles with two groups of PSDs at a relative density of 40% and an adequate confining pressure of 100 kPa. The test results indicated that D50 with identical Cu can affect the undrained cyclic behavior of coral gravelly particles. In contrast, Cu with identical D50 does not impact the undrained cyclic behavior of coral gravelly particles. The developing pore water pressure was uniform when the sample was subjected to the same cyclic loading. For samples with changing D50 values of 2.35, 4.70, and 7.05 mm, increasing D50 improved the cyclic liquefaction resistance. For samples with changing Cu, increasing Cu in the range of 1.06–5.00 first increased and then decreased the liquefaction resistance. [ABSTRACT FROM AUTHOR]

The simple shear test shows significant advantages when measuring the hardening and shear properties of thin sheet metal at large strains. However, previous shear tests had an end effect caused by local stress concentration and a boundary effect caused by deformation overflow, resulting in non-uniform strain distribution in the shear zone. Therefore, a unique V-shaped double-shear-zone specimen is proposed to measure the Bauschinger effect under cyclic shear loading conditions in this paper. Simple shear experiments and three different types of cycle shear experiments are conducted to analyze the uniformity of deformation in the shear zone and the effect of pre-strain and the number of cyclic loads on the Bauschinger effect of Q890 high-strength steel sheets. The results indicate that the proposed V-shaped double-shear-zone specimen can still maintain uniform shear deformation in forward/reverse cyclic loading experiments, even at large strains. Q890 high-strength steel exhibits a significant Bauschinger effect, which is more pronounced with the increase in shear pre-strain and loading cycles. The results of this paper provide a new approach for studying the hardening characteristics under large strain and the mechanical properties under cyclic shear loading for metal sheets. [ABSTRACT FROM AUTHOR]

We propose an experimental method to identify anisotropic coefficients in non-principal axis directions of thin-walled tubes. The method involves extracting specimens from the parent tubes and machining a hole in the axial center. The specimens are then inserted into a tube without a hole. The inner diameter of the specimen is theoretically equal to the outer diameter of the inner tube. The double-layer tube undergoes free bulging under internal pressure in our self-developed experimental equipment, with the hole on the specimen expanding simultaneously. The stress states around the hole are uniaxial, and the hole deformation can reflect the anisotropic plastic flow characteristics of the tube. Furthermore, based on the information obtained from the proposed experimental method, a hybrid numerical–experimental method was used to identify the anisotropic coefficients of tubes. Through FE simulations, the relationships between the thickness, stress, and strain states around the hole, the hole shape, and anisotropic coefficients of non-principal axis directions are revealed, and the factors that affect the hole deformation are analyzed. Finally, the hole bulging experiments and FE simulations of AA6061-O extruded tube were conducted, and modeled with Hill48 and calibrated by uniaxial tensile and hoop tensile tests. Its in-plane anisotropy coefficients in any direction are given for the first time which first increase and then decrease from 0° to 90°, reaching a maximum of 1.13 in 60° and a minimum of 0.69 in 0°. This work can provide the key experimental data for establishing an accurate anisotropic plastic constitutive model of thin-walled tubes. [ABSTRACT FROM AUTHOR]

To meet the requirement of lighter weight and better performance in tube hydroforming, one of the most important tasks is to accurately predict the forming limit of thin-walled tubes under nonlinear loading paths. This work established the M-K+DF2012 model, a combination of the M-K model and the DF2012 ductile fracture criterion, for the forming limit prediction of thin-walled tubes under nonlinear loading paths. In this model, the failure of the groove is determined by the DF2012 criterion, and the corresponding strains in the uniform region are the limit strains. The limit strains of an AA6061 aluminum alloy tube under a set of linear loading paths and two typical nonlinear loading paths were tested. Parameter values of the M-K+DF2012 model for the tube were determined based on the experimental limit strains under linear loading paths, and the limit strains under the two nonlinear loading paths were predicted. Then the strain-based forming limit diagram (ε-FLD) and the polar effective plastic strain FLD (PEPS-FLD) of the tube under different pre-strains were predicted and discussed. The results show that the limit strains of the tube are obviously path-dependent, and the M-K+DF2012 model can reasonably capture the limit strains of the tube under both linear and nonlinear loading paths. The predicted ε-FLD shows a strong dependence on the pre-strain, while the predicted PEPS-FLD is weakly strain path-dependent and almost path-independent on the right-hand side for the AA6061 tube. [ABSTRACT FROM AUTHOR]

In sheet metal forming, the material is usually subjected to a complex nonlinear loading process, and the anisotropic hardening behavior of the material must be considered in order to accurately predict the deformation of the sheet. In recent years, the homogeneous anisotropic hardening (HAH) model has been applied in the simulation of sheet metal forming. However, the existing HAH model is established in the second-order stress deviator space, which makes the calculation complicated and costly, especially for a plane stress problem such as sheet metal forming. In an attempt to reduce the computational cost, an HAH model in plane stress state is proposed, and called the HAH-2d model in this paper. In the HAH-2d model, both the stress vector and microstructure vector contain only three in-plane components, so the calculation is significantly simplified. The characteristics of the model under typical nonlinear loading paths are analyzed. Additionally, the feasibility of the model is verified by the stress–strain responses of DP780 and EDDQ steel sheets under different two-step uniaxial tension tests. The results show that the HAH-2d model can reasonably reflect the Bauschinger effect and the permanent softening effect in reverse loading, and the latent hardening effect in cross loading, while the predictive accuracy for cross-loading softening remains to be improved. In the future, the HAH-2d model can be further modified to describe more anisotropic hardening behaviors and applied to numerical simulations. [ABSTRACT FROM AUTHOR]

Flange wrinkling is often seen in deep-drawing process when the applied blankholding force is too small. This paper investigates the plastic wrinkling of flange under a constant blankholding force. A series of deep-drawing experiments of AA1100-O blanks are conducted with different blankholding forces. The critical cup height and wrinkling wave numbers for each case is established. A reduced-order model of flange wrinkling is developed using the energy method, which is implemented to predict the flange wrinkling of AA1100-O sheet by incrementally updating the flange geometry and material hardening parameters during the drawing process. A deep-drawing finite element model is developed in ABAQUS/standard to simulate the flange wrinkling of AA1100-O blanks under constant blankholding force. The predicted cup height and wave numbers from the finite element model and reduced-order model are compared with the experimental results, which demonstrates the accuracy of the reduced-order model, and its potential application in fast prediction of wrinkling in deep-drawing process. [ABSTRACT FROM AUTHOR]

Houttuynia cordata is a medicinal and edible plant with a wide biological interest. Many parts were discarded due to various modes of consumption, resulting in resource waste. In this study, a comprehensive study was conducted on various edible indicators and medicinal components of Houttuynia cordata to understand its edible and medicinal value. The edible indexes of each root, stem, and leaf were determined, and the metabolites of different parts were investigated using the headspace solid-phase micro-extraction technique (HS-SPME-GC-MS). The differential metabolites were screened by orthogonal partial least squares discriminant analysis (OPLS-DA) and clustering analysis. The results of the study showed that the parts of Houttuynia cordata with high edibility values as a vegetable were mainly the roots and leaves, with the highest vitamin C content in the roots and the highest total flavonoids, soluble sugars, and total protein in the leaves. The nutrient content of all the stems of Houttuynia cordata was lower and significantly different from the roots and leaves (p < 0.05). In addition, 209 metabolites were isolated from Houttuynia cordata, 135 in the roots, 146 in the stems, 158 in the leaves, and 91 shared metabolites. The clustering analysis and OPLS-DA found that the parts of Houttuynia cordata can be mainly divided into above-ground parts (leaves and stems) and underground parts (roots). When comparing the differential metabolites between the above-ground parts and underground parts, it was found that the most important medicinal component of Houttuynia cordata, 2-undecanone, was mainly concentrated in the underground parts. The cluster analysis resulted in 28 metabolites with up-regulation and 17 metabolites with down-regulation in the underground parts. Most of the main components of the underground part have pharmacological effects such as anti-inflammatory, anti-bacterial and antiviral, which are more suitable for drug development. Furthermore, the above-ground part has more spice components and good antioxidant capacity, which is suitable for the extraction of edible flavors. Therefore, by comparing and analyzing the differences between the edible and medicinal uses of different parts of Houttuynia cordata as a medicinal and food plant, good insights can be obtained into food development, pharmaceutical applications, agricultural development, and the hygiene and cosmetic industries. This paper provides a scientific basis for quality control and clinical use. [ABSTRACT FROM AUTHOR]

TGA transcription factor is a member of the D subfamily of the basic region-leucine zippers (bZIP) family. It is a type of transcription factor that was first identified in plants and is the main regulator in plant development and physiological processes, including morphogenesis and seed formation in response to abiotic and biotic stress and maintaining plant growth. The present study examined the sequence of the MaTGA8 transcription factor, the sequence of which belonged to subfamily D of the bZIP and had multiple cis-acting elements such as the G-box, TCA-element, TGACG-element, and P-box. Quantitative real time polymerase chain reaction (qRT-PCR) analyses showed that MaTGA8 was significantly down-regulated by the soil-borne fungus Fusarium oxysporum f. sp. cubense race 4 (Foc TR4). Under the induction of salicylic acid (SA), MaTGA8 was down-regulated, while different members of the MaNPR1 family responded significantly differently. Among them, MaNPR11 and MaNPR3 showed an overall upward trend, and the expression level of MaNPR4, MaNPR8, and MaNPR13 was higher than other members. MaTGA8 is a nuclear-localized transcription factor through strong interaction with MaNPR11 or weaker interaction with MaNPR4, and it is implied that the MaPR gene can be activated. In addition, the MaTGA8 transgenic Arabidopsis has obvious disease resistance and higher chlorophyll content than the wild-type Arabidopsis with the infection of Foc TR4. These results indicate that MaTGA8 may enhance the resistance of bananas to Foc TR4 by interacting with MaNPR11 or MaNPR4. This study provides a basis for further research on the application of banana TGA transcription factors in Foc TR4 stress and disease resistance and molecular breeding programs. [ABSTRACT FROM AUTHOR]

Risk communication is critical to emergency management. The objective of this paper is to illustrate the effective process and attention points of risk communication reflecting on the COVID-19 (2019-nCoV) outbreak in Wuhan, China. We provide the timeline of risk communication progress in Wuhan and use a message-centered approach to identify problems that it entailed. It was found that the delayed decision making of the local government officials and the limited information disclosure should be mainly responsible for the ineffective risk communication. The principles for effective risk communication concerning Wuhan's outbreak management were also discussed. The whole communication process is suggested to integrate the accessibility and openness of risk information, the timing and frequency of communication, and the strategies dealing with uncertainties. Based on these principles and lessons from Wuhan's case, this paper employed a simplified Government–Expert–Public risk communication model to illustrate a collaborative network for effective risk communication. [ABSTRACT FROM AUTHOR]