Search

Cocoa pod husks (CPH) and cocoa bean shells (CBS) are the main by-products of the cocoa industry and a source of bioactive compounds. These residues are not completely used and thrown in the fields without any treatment, causing environmental problems. Looking for a holistic valorization, the aim of this work was first to deeply characterize CPH and CBS in their chemical composition, amino acid, and fatty acid profiles, as well as their application as antioxidants. CBS had a high level of protein (17.98% DM) and lipids (16.24% DM) compared with CPH (4.79 and 0.35% DM respectively). Glutamic acid and aspartic acid were the predominant amino acids. The total phenolic compounds (TPC) detected in the ethanolic extracts of CPH and CBS were similar to pyrogallol as the main detected polyphenol (72.57 mg/L). CBS ethanolic extract showed a higher antioxidant activity than CPH. Both extracts increased the oxidation stability of soybean oil by 48% (CPH) and 32% (CBS). In addition, alkaline pretreatment of CPH was found suitable for the release of 15.52 ± 0.78 g glucose/L after subsequent saccharification with the commercial enzyme Cellic®. CTec2. Alkaline hydrolyzed and saccharified CPH (Ahs-CPH) was assessed for the first time to obtain polyhydroxy alkanoate (PHAs) and bioethanol. Ahs-CPH allowed the growth of both Cupriavidus necator DSM 545 and Saccharomyces cerevisiae Fm17, well-known as PHA- and bioethanol-producing microbes, respectively. The obtained results suggest that such agricultural wastes have interesting characteristics with new potential industrial uses that could be a better alternative for the utilization of biomass generated as million tons of waste annually. [ABSTRACT FROM AUTHOR]

Due to their long domestication time course, many industrial Saccharomyces cerevisiae strains are adopted in numerous processes mostly for historical reasons instead of scientific and technological needs. As such, there is still significant room for improvement for industrial yeast strains relying on yeast biodiversity. This paper strives to regenerate biodiversity with the innovative application of classic genetic methods to already available yeast strains. Extensive sporulation was indeed applied to three different yeast strains, specifically selected for their different origins as well as backgrounds, with the aim of clarifying how new variability was generated. A novel and easy method to obtain mono-spore colonies was specifically developed, and, to reveal the extent of the generated variability, no selection after sporulation was introduced. The obtained progenies were then tested for their growth in defined mediums with high stressor levels. A considerable and strain-specific increase in both phenotypic and metabolomic variability was assessed, and a few mono-spore colonies were found to be of great interest for their future exploitation in selected industrial processes. [ABSTRACT FROM AUTHOR]

Traditional plastics represent a tremendous threat to the environment because of increases in polluting manufacturing as well as their very extended degradation time. Polyhydroxyalkanoates (PHAs) are polymers with similar performance to plastic but are compostable and synthesizable from renewable sources and therefore could be a replacement for fossil-based plastics. However, their production costs are still too high, thus demanding the investigation of new and cheap substrates. In this sense, agricultural wastes are attractive because they are inexpensive and largely available. Specifically, fruit and vegetables are rich in sugars that could be fermented into PHAs. In this work two strains, Cupriavidus necator DSM 545 and Hydrogenophaga pseudoflava DSM 1034, well-known PHA-producing microbes, were screened for their ability to grow and accumulate PHAs. Ten different fruit and vegetable processing waste streams, never before reported in combination with these strains, were tested. Residues from red apple and melon were found to be the most suitable feedstocks for PHA production. Under specific selected conditions, C. necator DSM 545 accumulated up to 7.4 and 4.3 g/L of 3-hydroxybutyrate (3HB) from red apple and melon, respectively. Copolymer production was also obtained from melon. These results confirm the attractiveness of food processing waste as a promising candidate for PHA production. Ultimately, these novel substrates draw attention for future studies on process optimization and upscaling with C. necator. [ABSTRACT FROM AUTHOR]

Microorganisms from extreme environments are considered as a new and valuable reservoir of bioactive molecules of biotechnological interest and are also utilized as tools for enhancing tolerance to (a)biotic stresses in crops. In this study, the fungal endophytic community associated with the leaves of the Antarctic angiosperm Colobanthus quitensis was investigated as a new source of bioactive molecules. We isolated 132 fungal strains and taxonomically annotated 26 representative isolates, which mainly belonged to the Basidiomycota division. Selected isolates of Trametes sp., Lenzites sp., Sistotrema sp., and Peniophora sp. displayed broad extracellular enzymatic profiles; fungal extracts from some of them showed dose-dependent antitumor activity and inhibited the formation of amyloid fibrils of α-synuclein and its pathological mutant E46K. Selected fungal isolates were also able to promote secondary root development and fresh weight increase in Arabidopsis and tomato and antagonize the growth of pathogenic fungi harmful to crops. This study emphasizes the ecological and biotechnological relevance of fungi from the Antarctic ecosystem and provides clues to the bioprospecting of Antarctic Basidiomycetes fungi for industrial, agricultural, and medical applications. [ABSTRACT FROM AUTHOR]

This paper is a microbiological voyage throughout the main discoveries and research activities of scholars who studied or taught in this field at Padova University during its 800-year history. The ancient practice of variolization, the so-called miracle of Legnaro and the pellagra debate, whose observations and investigations were driven at Padova even before microbiology was established as a scientific discipline, along with the modern era research activities in the field of agricultural, environmental and food microbiology, undoubtedly suggest the hallmark and everyday role played by microbes in overwhelmingly global, but profoundly human, adventures. [ABSTRACT FROM AUTHOR]

Bioethanol obtained from agro-food wastes could contribute to decrease the dependency on fossil resources, reduce the impact of fossil fuels on the environment, and mitigate the food versus fuel debate. This study is aimed to investigate the availability of residual inexpensive agro-food biomasses that could feed a second-generation bioethanol plant located in a specific area of North Eastern Italy. After the identification of all crops in the area, more than 40 agro-food residues were analyzed for their availability and compositions in terms of water, polysaccharides, and sugars potentially convertible into bioethanol. 574,166 Mg of residual wet lignocellulosic biomass corresponding to 297,325 Mg of dry material were found available for bioethanol conversion. The most promising substrates were wheat straw and vine shoots. Based on the chemical composition of residues, the potential attainable ethanol was determined. Theoretical potential ethanol production was estimated at nearly 72,000 Mg per year. This quantity extensively exceeds the minimum yearly capacity of a sustainable bioethanol plant previously identified as around 50,000 Mg of ethanol. Taken together, these results demonstrate that, in the analyzed area, agro-food residues are available in an amount that could sustain bioethanol production in a specific and restricted district. Techno-economical evaluations are in progress to assess the actual feasibility of installing a second generation bioethanol production plant in the area of interest. [ABSTRACT FROM AUTHOR]

Due to oil shortage and environmental problems, synthetic plastics have to be replaced by different biodegradable materials. A promising alternative could be polyhydroxyalkanoates (PHAs), and the low-cost abundant agricultural starchy by-products could be usefully converted into PHAs by properly selected and/or developed microbes. Among the widely available starchy waste streams, a variety of residues have been explored as substrates, such as broken, discolored, unripe rice and white or purple sweet potato waste. Cupriavidus necator DSM 545, a well-known producer of PHAs, was adopted in a simultaneous saccharification and fermentation (SSF) process through an optimized dosage of the commercial amylases cocktail STARGEN™ 002. Broken rice was found to be the most promising carbon source with PHAs levels of up to 5.18 g/L. This research demonstrates that rice and sweet potato waste are low-cost feedstocks for PHAs production, paving the way for the processing of other starchy materials into bioplastics. [ABSTRACT FROM AUTHOR]

In yeast engineering, metabolic burden is often linked to the reprogramming of resources from regular cellular activities to guarantee recombinant protein(s) production. Therefore, growth parameters can be significantly influenced. Two recombinant strains, previously developed by the multiple δ-integration of a glucoamylase in the industrial Saccharomyces cerevisiae 27P, did not display any detectable metabolic burden. In this study, a Fourier Transform InfraRed Spectroscopy (FTIR)-based assay was employed to investigate the effect of δ-integration on yeast strains' tolerance to the increasing ethanol levels typical of the starch-to-ethanol industry. FTIR fingerprint, indeed, offers a holistic view of the metabolome and is a well-established method to assess the stress response of microorganisms. Cell viability and metabolomic fingerprints have been considered as parameters to detecting any physiological and/or metabolomic perturbations. Quite surprisingly, the three strains did not show any difference in cell viability but metabolomic profiles were significantly altered and different when the strains were incubated both with and without ethanol. A LC/MS untargeted workflow was applied to assess the metabolites and pathways mostly involved in these strain-specific ethanol responses, further confirming the FTIR fingerprinting of the parental and recombinant strains. These results indicated that the multiple δ-integration prompted huge metabolomic changes in response to short-term ethanol exposure, calling for deeper metabolomic and genomic insights to understand how and, to what extent, genetic engineering could affect the yeast metabolome. [ABSTRACT FROM AUTHOR]

The use of solid starchy waste streams to produce value-added products, such as fuel ethanol, is a priority for the global bio-based economy. Despite technological advances, bioethanol production from starch is still not economically competitive. Large cost-savings can be achieved through process integration (consolidated bioprocessing, CBP) and new amylolytic microbes that are able to directly convert starchy biomass into fuel in a single bioreactor. Firstly, CBP technology requires efficient fermenting yeast strains to be engineered for amylase(s) production. This study addressed the selection of superior yeast strains with high fermentative performances to be used as recipient for future CBP engineering of fungal amylases. Twenty-one newly isolated wild-type Saccharomyces cerevisiae strains were screened at 30 °C in a simultaneous saccharification and fermentation (SSF) set up using starchy substrates at high loading (20% w/v) and the commercial amylases cocktail STARGEN™ 002. The industrial yeast Ethanol Red™ was used as benchmark. A cluster of strains produced ethanol levels (up to 118 g/L) significantly higher than those of Ethanol Red™ (about 109 g/L). In particular, S. cerevisiae L20, selected for a scale-up process into a 1-L bioreactor, confirmed the outstanding performance over the industrial benchmark, producing nearly 101 g/L ethanol instead of 94 g/L. As a result, this strain can be a promising CBP host for heterologous expression of fungal amylases towards the design of novel and efficient starch-to-ethanol routes. [ABSTRACT FROM AUTHOR]