Search

Simple Summary: In Central Europe, one of the main issues in wildlife management at present is its increasing abundance. As population density increases, diseases that directly or indirectly affect humans are also becoming more prevalent. Although fibropapillomatosis is one of the diseases that does not threaten humans, the accumulation of some heavy metals in tumours has been shown to occur at concentrations that would already be toxic to humans and wildlife. In general, the heavy metal content in wild animal tissues is a partly known topic that was studied on muscle or internal organs but is almost unstudied in tumours. Therefore, we evaluated the content of selected heavy metals in roe deer—the most widespread wildlife species across Europe. If the accumulation of these heavy metals in the tumours also affects the muscle of the individual, which is then intended for consumption by the final consumer, such meat could be considered a health hazard. This pilot study is a cornerstone for further research to clarify the safety or otherwise of meat from wild game affected by fibropapillomatosis. In recent decades, there has been an increase in European wild ungulate populations, often associated with a decline in health and spread of disease. This is true for the roe deer (Capreolus capreolus), the most common European cervid, with populations apparently affected by fibropapillomatosis, an increasingly common cancer. To date, however, there has been little research into this disease, thus many interactions remain unclear and descriptions of tumour composition are poorly validated. The main aim of the present study was to evaluate the presence and concentration of toxic heavy metals in roe deer skin tumours. Our results confirmed the presence of virtually all the metals tested for, i.e., Pb, Hg, Cd, As, Cr, Mn, Al, Co, Cu, Ni, Se, Zn, and Fe, with the highest average concentrations found for Cr (0.99 mg/kg−1 ± 2.23 SD), Cd (0.03 mg/kg−1 ± 0.03 SD), and Hg (0.02 mg/kg−1 ± 0.02 SD), exceeding FAO limits for meat from slaughtered animals. We also observed a significant positive relationship between heavy metal concentration and age, especially for Pb, As, Hg, Mn, Se, Al, Zn, and Ni. Our findings provide a strong baseline for further research on the impact of fibropapillomatosis, not only on the welfare and health status of game but also on the final consumer of venison, which in many respects is regarded as a high-quality, ecological, and renewable wild resource. While deer with this disease are not considered qualitatively or medically defective, they could represent a potential reservoir of substances toxic to humans and could affect substance levels in adjacent tissues or the animal as a whole. [ABSTRACT FROM AUTHOR]

Simple Summary: Wildlife in human-dominated landscapes often faces a range of disturbances that can alter their natural behaviors. Wild boar (Sus scrofa) populations are increasing across Europe, raising concerns about ecological impacts and the spread of diseases such as African swine fever (ASF). This research focuses on the behavioral adaptations of wild boars in response to specific human disturbances. Utilizing advanced biologging technologies, specifically accelerometer and magnetometer combined with dead reckoning methods, fifteen wild boars in a suburban forest near Prague were monitored over a period from February 2020 to July 2021. This study provides insights into the wild boar's resilience, revealing that while the animals are inclined to flee when near disturbances, they predominantly remain in a resting state otherwise. Their most common reaction was to continue resting. These observations underscore the potential role of disturbance management in controlling the spread of zoonotic diseases such as African swine fever (ASF) within wild boar populations. Currently, African swine fever (ASF), a highly fatal disease has become pervasive, with outbreaks recorded across European countries, leading to preventative measures to restrict wild boar (Sus scrofa L.) movement, and, therefore, keep ASF from spreading. This study aims to detail how specific human activities—defined as "car", "dog", "chainsaw", and "tourism"—affect wild boar behavior, considering the disturbance proximity, and evaluate possible implications for wild boar management in ASF-affected areas. Wild boar behavior was studied using advanced biologging technology. This study tracks and analyzes wild boar movements and behavioral responses to human disturbances. This study utilizes the dead reckoning method to precisely reconstruct the animal movements and evaluate behavioral changes based on proximity to disturbances. The sound of specific human activities was reproduced for telemetered animals from forest roads from different distances. Statistical analyses show that wild boars exhibit increased vigilance and altered movement patterns in response to closer human activity, but only in a small number of cases and with no significantly longer time scale. The relative representation of behaviors after disruption confirmed a high instance of resting behavior (83%). Running was the least observed reaction in only 0.9% of all cases. The remaining reactions were identified as foraging (5.1%), walking (5.0%), standing (2.2%), and other (3.8%). The findings suggest that while human presence and activities do influence wild boar behavior, adherence to movement restrictions and careful management of human activity in ASF-infected areas is not a necessary measure if human movement is limited to forest roads. [ABSTRACT FROM AUTHOR]

Simple Summary: The rapidly growing wild boar population has resulted in an increasing rate of human–wildlife conflicts, including economic damage to crops or spreading African swine fever (ASF), which affects the pork industry. This situation necessitates the adoption of various measures to prevent wild boar movement, mitigate spreading of diseases, and protect crops. We evaluated the impact of commonly used odor fences (Wildschwein Stopp) using GPS telemetry of tagged individuals. The telemetry of free-ranging wild boars demonstrated no effect on their crossing of the odor fence lines compared to before the installation. Moreover, no difference was found when comparing the home range size of monitored individuals during the 22 days before and after odor fence installation. Therefore, our findings do not support using odor fences to prevent wild boar movement as a mitigation measure of ASF transmission or line protection against the damage caused by wild boars to crops. Wild boars are an opportunistic wildlife species that has successfully colonized the human-modified landscape in Europe. However, the current population boom has negative consequences, which result in a rapid increase in human–wildlife conflicts and disease transmission, including African swine fever (ASF). The increasing frequency of conflicts requires adequate solutions for these issues through various measures. Application of deterrents is a common non-lethal measure whose effects have been insufficiently verified until recently. Thus, this study aims to evaluate the effectiveness of odor fences, often applied as a barrier against wild boar movement. For this purpose, 18 wild boars were marked with GPS collars. After 22 days of initial monitoring, 12 sections of odor fences were installed on their home ranges. The monitored wild boars crossed the area 20.5 ± 9.2 times during the pre-installation period and 19.9 ± 8.4 times after the odor fence installation. Moreover, the average home range varied between 377.9 ± 185.0 ha before and 378.1 ± 142.2 ha after the odor fence installation. Based on GPS telemetry results, we do not support using odor repellent lines for crop protection or for limiting wild boar movement to lessen ASF outbreaks. [ABSTRACT FROM AUTHOR]

Oak is one of the most economically important hardwood tree species in Europe, and its prevalence will increase due to progressing global climate change, according to predictive models. With the increasing demand for timber and with the need for a balance between carbon emissions and sequestration, it is essential to address the afforestation of agricultural land. Therefore, this research aimed to investigate the physico-mechanical properties and anatomical structure of pendulate oak (Quercus robur L.) wood—specifically focusing on the trunk's cross-section—in post-agricultural areas compared with the forest land in the western part of Poland. Wood density, bending strength, modulus of elasticity, and other parameters were analyzed from 1626 wood samples. The analysis of physico-mechanical properties reveals that, historically, agricultural land use has an almost negligible impact on wood quality. Despite significant differences in small vessel diameter and fiber length favoring trees from post-agricultural land, the physico-mechanical properties remain consistent. Large vessel measurements show comparable diameter and length in both land types. These findings suggest that post-agricultural land can serve as an effective alternative for high-quality pendulate oak wood production for industrial purposes. However, wood from post-agricultural land may exhibit a decrease in modulus of rupture by over 30% and potentially lower density above the trunk's halfway point. This observation hints at the fact that oak trees in post-agricultural areas could be cultivated in shorter rotation periods compared to forest land. [ABSTRACT FROM AUTHOR]

Scots pine (Pinus sylvestris L.) represents one of the most important commercial coniferous tree species, providing valuable timber. Due to climate change, it is experiencing serious problems in some areas, therefore, finding a suitable substitute for its wood is currently a challenge. In this study, we compared the wood quality of three different non-native pine species and Scots pine growing at the same site to ensure identical growing conditions. Black pine (Pinus nigra J. F. Arnold), a pine species native to Southern Europe, lodgepole pine (Pinus contorta Douglas ex Loudon), and ponderosa pine (Pinus ponderosa Douglas ex C. Lawson) native to North America were compared to Scots pine for selected quantitative (productivity) and qualitative (physical and mechanical) properties. Significant differences between pine species were found in all quantitative dendrometric parameters, except average diameter at breast height. The stand volume ranged from 157 m3 ha−1 for lodgepole pine to 356 m3 ha−1 for Scots pine. For qualitative characteristics, wood density, shrinkage, and compressive strength were used to find differences among species in choosing the best alternative. The highest wood density was obtained for Scots pine (458 kg m−3), followed by black pine with 441 kg m−3. The density of the remaining pine species was significantly lower. Scots pine also exceeded the tested species in compressive strength (44.2 MPa). Lodgepole pine achieved the second highest value (39.3 MPa) but was statistically similar to black pine (36.5 MPa). The tested pine species exhibited similar values in shrinkage, which were statistically insignificant, ranging from 14.3% for lodgepole pine to 15.1% for Scots pine. Based on applications and preferred characteristics, black pine or lodgepole pine could serve as the Scots pine substitute in some areas. And vice versa, ponderosa pine did not attain the Scots pine wood quality. [ABSTRACT FROM AUTHOR]

The silver fir (Abies alba Mill.) is among the most valuable conifers in Europe for ecological and economic reasons. Throughout the course of history, primarily in the 20th century, its share in stands has been declining due to ill-suited management practices, especially clear-cut management, air pollution (SO2 and NOX emissions), and wildlife-induced damage. This literature review compiles findings from 338 scientific papers. It describes futures for silver fir and its distribution, ecological requirements, threats and diseases, seed production and nurseries, and forest management practices with emphasis on ongoing climate change. Based on recent knowledge of fir ecology and population dynamics, small-scale shelterwood and selection management have been introduced in fir stands, which have also stabilized them. Fir is an essential species for maintaining high stability and biodiversity, especially on planosols and in waterlogged habitats. Owing to its shade tolerance and environmental plasticity, it can coexist very well with many tree species in mixtures, which can increase the productive potential of stands within the natural range in Europe. The average stand volume of mature fir stands ranges from 237–657 m3 ha−1. For its successful natural regeneration, it is essential to reduce cloven-hoofed game and thus prevent bud browsing damage. The attractiveness of fir in terms of heavy browsing is the highest of all conifers (52% damage). On the other hand, fir is a species relatively resistant to bark stripping and the spread of secondary rot compared with Norway spruce (Picea abies [L.] Karst.). Under global climate change, fir is expected to shift to higher elevations with sufficient precipitation, while in the southern part of its natural range or at lower elevations, outside water-influenced habitats, it is likely to decline. Climate change is intricately linked to the heightened prevalence of forest pathogens with significant damage potential in Europe, necessitating careful consideration and strategic adaptation within management practices of fir forests. [ABSTRACT FROM AUTHOR]

European forests are facing ongoing climate change, and certain tree species are being critically impacted. The Norway spruce (Picea abies (L.) Karst.) is one of the most sensitive species to climate fluctuations, a fact manifesting itself through massive dieback resulting in a lack of high-quality timber and timber market destabilization. Therefore, the possibility of wood substitution with non-native spruce species, namely, black spruce (Picea mariana (Mill.) Britt., Sterns, et Poggenburg), Serbian spruce (Picea omorika (Pančić) Purk.), and blue spruce (Picea pungens Engelm.), under the specific conditions of forest reclamations with great potential for future afforestation was tested. Wood density, modulus of rupture, and modulus of elasticity were used to evaluate wood quality in comparison with native Norway spruce. The results confirmed that only the Serbian spruce reached the quality of Norway spruce and even exceeded it in terms of wood density (P. omorika 525 kg·m−3 vs. P. abies 517 kg·m−3) and exhibited comparable parameters with regard to other properties. The density of the other species was significantly lower for blue spruce (476 kg·m−3) and black spruce (468 kg·m−3). A similar trend was found for other wood parameters, which confirmed that Norway spruce quality was nearly comparable with that of Serbian spruce. On the other hand, black spruce and blue spruce did not match the quality of Norway spruce. The within-stem variability of the properties tested was low for all the spruce species examined. In conclusion, the Serbian spruce showed great potential for future usage in forest management and is one of the possible methods of Norway spruce replacement in times of unprecedented forest disturbances under the effects of global climate change. [ABSTRACT FROM AUTHOR]

Forest ecosystems in Sri Lanka are under pressure from intensive human activity and climate change. Invasive species are one of the greatest threats to autochthonous species and ecosystems. In Bundala National Park of Sri Lanka, there are efforts to control and limit the spreading of unwanted invasive Prosopis juliflora (Sw.) DC. and Opuntia dillenii (Ker-Gawl.) Haw., which poses a significant risk to natural ecosystem conservation. Nine different treatment variants (four replications) were used to test which management approach provides the control of Prosopis juliflora. This research is based on nine repeated measurements from 2017 to 2021 on 36 permanent research plots (each 625 m2) with 27 observed plant species and a total of 90,651 recorded plant individuals. The results confirmed that the dynamics of species richness, heterogeneity, and evenness showed significant differences between treatments during the five years of dynamics. The lowest species diversity was found in the control variant, followed by treatments based on the hard pruning and thinning of Prosopis juliflora trees. In contrast, strategies emphasizing the complete uprooting of Prosopis juliflora trees, replanting, and support of the natural regeneration of native species showed high species diversity and a high overall number of plant species. Generally, treatments had a significant effect on species diversity and the number of individuals of Prosopis juliflora, while changes in the overall number of plant species were more affected by time and succession. Silvicultural treatments including pruning, uprooting, and thinning have proven to be essential tools for nature conservation across various sites, aimed at enhancing habitat diversity in the face of ongoing climate change. [ABSTRACT FROM AUTHOR]

Turkey oak (Quercus cerris L.) is a thermophilic oak species that is gaining importance in the context of ongoing climate change because of its better resistance to climatic extremes and drier conditions. Therefore, this article focuses on Turkey oak's role and growth properties in the coppice forests of Southern Europe (Italy, Bulgaria) compared to similar site conditions in Central Europe (Slovakia, Czechia). The aims are to evaluate the basic dendrometry indicators, stand biodiversity, growth dynamics, and the effect of climatic factors on tree-ring increment on specific site chronologies. We found that the tree density in coppices of 50–60 years varied between 475 and 775 trees ha−1, and the stand volume ranged from 141 to 407 m3 ha−1. The complex stand diversity of all plots ranged from a monotonous to uniform structure. The size of tree-ring growth was closely related to indicators of stand density. The lowest influence of climatic factors on tree-ring growth was found in sites in Italy and the highest in Slovakia. The primary limiting factor for growth was the lack of precipitation during the growing season, especially in June and July. In contrast, temperature had a marginal effect on radial growth compared to precipitation. The radial growth in research plots in Southern Europe goes through longer 6 to 8-year growth cycles, and in Central European sites, it goes through shorter cycles of 2.4 to 4.8 years, which confirms better growth conditions in this region. The studied coppice stands exhibit a stable reaction to climate change. Yet, regarding cyclical growth, the Central European stands benefit from an advantageous climate and grow better than in Southern Europe. As part of the changing environmental conditions, Turkey oak is becoming an important tree species that can achieve high production potential even in drier habitats due to its regeneration characteristic as coppice and may play a critical role in its northerly introduction in Europe. [ABSTRACT FROM AUTHOR]

Simple Summary: Geographical variability of acoustic signals is studied more often in songbird species, which does not include the black grouse. The black grouse males use different calls during the mating performance, including vocal rookooing. No studies have yet dealt with a more detailed analysis of these signals, except one. Although the studied hissing calls of this species are classified as non-vocal acoustic signals, individuality was observed in these calls. To discern whether there is also geographical variability across the range or distribution area of the black grouse, we analyzed and compared hissing calls from four countries. Individuals in the Czech Republic, Finland, Scotland, and Russia were recorded during mating seasons. The results of the analysis revealed differences between the four subpopulations, although not at the level of dialect distinction. The study of acoustic variability, supported by genetic research, will help to better understand the links or, conversely, the differentiation processes between subpopulations. The black grouse is a species whose population development requires constant monitoring due to a rapidly declining trend, especially in Central Europe. Variability in the voices of geographically separated populations can aid in counting within individual populations. This has been investigated with the black grouse. However, the variability of the acoustic behavior of black grouse between populations was investigated for the first time. In total, 82 male black grouse were recorded during the lekking season in four countries: the Czech Republic, Scotland, Finland, and Russia. We analyzed recordings of hissing calls, i.e., the non-vocal signal. DFA analysis correctly classified almost 70% of the recordings. The results indicate a certain degree of difference between the grouse populations from the four countries examined. The mean frequency of hissing calls for populations was 1410.71 ± 170.25 Hz, 1473.89 ± 167.59 Hz, 1544.38 ± 167.60 Hz, and 1826.34 ± 319.23 Hz in the Czech Republic, Finland, Russia, and Scotland, respectively. Populations from Scotland and Russia have greater intra-variability compared to grouse from the Czech Republic and Finland, indicating that population density is not the principal factor in the geographical variability of black grouse hissing calls. Range-level differences enhance knowledge and facilitate the assessment of species evolution. [ABSTRACT FROM AUTHOR]

Simple Summary: Modern 3D imaging methods offer many scientific disciplines the opportunity to take their results to the next level. Using standard measurement methods, a CT scanner and a 3D scanner, we have established a methodology for using these devices for craniometric measurements. Craniometry is an important means of obtaining information on population quality and its long-term evolution, not only in wildlife species. In the case of these measurements, an important aspect is the accuracy and time efficiency of the methods used. It has been shown that 3D imaging technologies are able to obtain high quality data in comparable time to standard methods. A comparison of methods has proven that both the CT scanner and the 3D scanner can achieve accurate values, measure a larger range of variables, and store digital copies of the object for archiving or future research. The suitability of CT and 3D scanners for craniometric proposes was tested using digital calipers when determining linear measurements, and a measuring cylinder was used for the accuracy of 3D printing of deer antlers obtained by the CT and 3D scanners. The resolution of digitized objects from a 3D scanner ranged from 0.008 mm to 0.122 mm. For mandibular dimensions, a positive deviation (p < 0.01) from the primary control measurement was recorded. The average antler volume measured with the cylinder was 60.47 cm3 at the first measurement, in the case of the CT scanner 61.62 cm3 and for the 3D scanner 64.76 cm3—both technologies exhibit a positive deviation from the primary measurement. Precise sensing and measurements can be used to evaluate the quality and evolution of wildlife populations, create digital museum collections, or to examine in detail certain traits such as antler and horn development or dentition. [ABSTRACT FROM AUTHOR]

Scree forests with large numbers of protected plants and wildlife are seriously threatened by climate change due to more frequent drought episodes, which cause challenges for very stony, shallow soils. The effect of environmental factors on the radial growth of five tree species—European beech (Fagus sylvatica L.), Norway spruce (Picea abies (L.) Karst.), sycamore maple (Acer pseudoplatanus L.), European ash (Fraxinus excelsior L.), and mountain elm (Ulmus glabra Huds.)—was studied in the mixed stands (105–157 years) in the western Krkonoše Mountains (Czech Republic) concerning climate change. These are communities of maple to fir beechwoods (association Aceri-Fagetum sylvaticae and Luzulo-Abietetum albae) on ranker soils at the altitude 590–700 m a.s.l. Production, structure, and biodiversity were evaluated in seven permanent research plots and the relationships of the radial growth (150 cores) to climatic parameters (precipitation, temperature, and extreme conditions) and air pollution (SO2, NOX, ozone exposure). The stand volume reached 557–814 m3 ha−1 with high production potential of spruce and ash. The radial growth of beech and spruce growing in relatively favorable habitat conditions (deeper soil profile and less skeletal soils) has increased by 16.6%–46.1% in the last 20 years. By contrast, for sycamore and ash growing in more extreme soil conditions, the radial growth decreased by 12.5%–14.6%. However, growth variability increased (12.7%–29.5%) for all tree species, as did the occurrence of negative pointer years (extremely low radial growth) in the last two decades. The most sensitive tree species to climate and air pollution were spruce and beech compared to the resilience of sycamore and ash. Spectral analysis recorded the largest cyclical fluctuations (especially the 12-year solar cycle) in spruce, while ash did not show any significant cycle processes. The limiting factors of growth were droughts with high temperatures in the vegetation period for spruce and late frosts for beech. According to the degree of extreme habitat conditions, individual tree species thus respond appropriately to advancing climate change, especially to an increase in the mean temperature (by 2.1 °C), unevenness in precipitation, and occurrence of extreme climate events in the last 60 years. [ABSTRACT FROM AUTHOR]

Simple Summary: Forest grouses are among the most endangered ground-nesting birds in Central Europe. Their rapid population decline was associated with habitat loss and increasing predation risk leading to low breeding success. The aim of this study was to describe black grouse nest predators and potential predation risk in a study area with a small, extant population of black grouse (Ore Mts.) and in a study area with an already extinct grouse population (Jeseníky Mts.) in the Czech Republic. In order to determine the predation intensity to black grouse nests, 50 artificial nests (28 in Ore Mts., 22 in Jeseníky Mts.) were monitored using camera traps. The results showed that 56% of nests were predated. Within the time needed for successful incubation of the eggs (25 days), the nest survival probability was on average 45.5%. The proportion of depredated nests did not differ between habitat types (i.e., open forest interior, clearing, forest edge). The stone marten was the main potential nest predator in both study areas (39% in total), followed by common raven (25%) and red fox (22%). In conclusion, our study revealed the high predation pressure on black grouse nests which corresponds with increasing population trends of mesopredators and wild boars in Central Europe. We evaluated the spatiotemporal patterns of predation risk on black grouse nests using artificial nests that were monitored by camera traps in mountain areas with a small extant (Ore Mts.) and already extinct (Jeseníky Mts.) black grouse population. The overall predation rate of artificial nests was 56% and we found significant differences in survival rate courses over time between both study areas (68% Ore Mts. vs. 41%, Jeseníky Mts.). Within the time required for successful egg incubation (25 days), nest survival probability was 0.32 in the Ore Mts. and 0.59 in Jeseníky Mts. The stone marten (Martes foina) was the primary nest predator in both study areas (39% in total), followed by common raven (Corvus corax, 25%) and red fox (Vulpes vulpes, 22%). The proportion of depredated nests did not differ between habitat types (i.e., open forest interior, clearing, forest edge), but we recorded the effect of interaction of study area and habitat. In Ore Mts., the main nest predator was common raven with seven records (37%). The Eurasian jay (Garrulus glandarius) was responsible for most predation attempts in Jeseníky Mts. (five records, i.e., 83%), while in the Ore Mts., most predation attempts were done by red fox (six records, i.e., 38%). [ABSTRACT FROM AUTHOR]

The objective of this research was to determine the efficiency of different types of protective barriers and how they protect against fraying damage in extensive fruit tree orchards. Orchards in open agricultural land are the target of fraying damage caused by roe deer (Capreolus capreolus L.). We assessed the effectiveness of four protective barriers: a rabbit-proof fence, a standard plastic tube commonly used in forestry, and an innovative plastic tube—variants with and without an additional rendering fat application. The study was situated in three extensive orchards in the southeastern part of Moravia in the Czech Republic. We analyzed the ratio of damaged trees, stem circumference damage, the length and height of damage on tree stems, the time periods with the most observed damage, and finally, the economic efficiency of each studied barrier. Most of the damage was observed in April and July. The most effective protective barrier was the innovative tube with rendering fat application (up to 100%) followed closely by the innovative tube without rendering fat application (95%). The standard plastic tube had an effectiveness of 49%, while the rabbit-proof fence was the least effective at 25%. In terms of the mean damage-lengths on tree stems, we found no significant differences between the rabbit-proof fence and the standard plastic tubes (21–22 cm). The usage of the innovative plastic tube without rendering fat reduced the average damage-length by half (10 cm) as compared to standard types (rabbit-proof fence, standard tube) of protection. The damage-heights on tree stems showed no significant differences among all variants (53–58 cm from the ground). Our analysis of economic parameters showed that rabbit-proof fencing had the worst cost efficiency, while the innovative tubes without rendering fat, had the best cost efficiency. We recommend starting the installation of protective barriers on trees in March, since we recorded relatively high activity of male roe deer in the following months. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess the effects of bark stripping caused by sika deer (Cervus nippon [Temminck]) on the production and structure of young Norway spruce (Picea abies L. Karst) forest stands (41–43 years). Production parameters, structure, diversity, and the dynamics of radial growth in selected forest stands in relation to climatic conditions were evaluated. Similar to other production parameters, stand volumes showed lower values on research plots heavily damaged by bark stripping (290 m3 ha−1) compared to stands with lower tree stem damages (441 m3 ha−1). A significant decrease in stem volume was recorded for trees with stem circumference damage higher than 1/3 of the stem circumference. In most cases, the trees were damaged between the ages of 10–23 years, specifically the radial growth was significantly lowered in this period. The diameter increment of damaged trees dropped to 64% of the healthy counterparts in this period. Bark stripping damages reached up to 93% of the stem circumference with a mean damage of 31%. Stem rot was found on 62% of damaged trees. In our study area, with respect to the terms of climatic conditions, precipitation had a higher effect on radial growth of the Norway spruce compared to temperature. The main limiting climatic factor of tree growth was the lack of precipitation within a growing season, particularly in June of the current year. [ABSTRACT FROM AUTHOR]