Search

This document provides an overview of the application of coastal/ocean sensors and systems for collecting ocean data. The sensors are designed to integrate with existing monitoring systems and can be used in both coastal and deep sea environments. They monitor various environmental variables and contaminants, offering advantages such as autonomy, small size, low power consumption, and data transmission capabilities. The document also highlights specific contributions published in a special issue of the Journal of Marine Science & Engineering, covering topics such as radioactivity monitoring, seawater gamma spectrometry, submarine groundwater discharge, and ship air pollution. These advancements in sensor technology have important implications for studying oceanographic processes, ocean health, safety, and resources. The document discusses various advancements and methods in environmental monitoring, including radiological monitoring, submarine groundwater discharge, ocean sensors, sediment dynamics, and acoustic vector sensor arrays. The authors emphasize the importance of these advancements in understanding and managing environmental processes and provide recommendations for future research. [Extracted from the article]

Echo-sounders and Vessel-Mounted Acoustic Doppler Current Profilers (VM-ADCP) are widely operating onboard research vessels with the aim of providing real-time backscatter and ocean current profiles along the route, while the vessel is moving. Backscatter data are exploited to infer important information about zooplankton presence and distribution. Nevertheless, as these organisms daily vertically migrate even below the depth of the instrument range, the combination of space and time variability make their mapping from a moving vessel quite complex. The objective of this work is to describe a GIS application developed for the management and analysis of these data. The GIS capability as a tool to facilitate zooplankton investigations is assessed by means of a test-case in the area of the Ligurian Sea (Western Mediterranean) by using VM-ADCP backscatter data made available during oceanographic campaigns. The system, which includes a high-resolution bathymetry, environmental parameters, ephemeris, allows to select and visualize data sorted according to all the possible layer combinations. Moreover, different backscatter profiles, characterizing the identified migration phases can be enlightened by means of false color scale representation. [ABSTRACT FROM AUTHOR]

This work deals with the installation of two smart in-situ sensors (for underwater radioactivity and underwater sound monitoring) on the Western 1-Mediterranean Moored Multisensor Array (W1-M3A) ocean observing system that is equipped with all appropriate modules for continuous, long-term and real-time operation. All necessary tasks for their integration are described such as, the upgrade of the sensors for interoperable and power-efficient operation, the conversion of data in homogeneous and standard format, the automated pre-process of the raw data, the real-time integration of data and metadata (related to data processing and calibration procedure) into the controller of the observing system, the test and debugging of the developed algorithms in the laboratory, and the obtained quality-controlled data. The integration allowed the transmission of the acquired data in near-real time along with a complete set of typical ocean and atmospheric parameters. Preliminary analysis of the data is presented, providing qualitative information during rainfall periods, and combine gamma-ray detection rates with passive acoustic data. The analysis exhibits a satisfactory identification of rainfall events by both sensors according to the estimates obtained by the rain gauge operating on the observatory and the remote observations collected by meteorological radars. [ABSTRACT FROM AUTHOR]

In European seas, ocean monitoring strategies in terms of key parameters, space and time scale vary widely for a range of technical and economic reasons. Nonetheless, the growing interest in the ocean interior promotes the investigation of processes such as oxygen consumption, primary productivity and ocean acidity requiring that close attention is paid to the instruments in terms of measurement setup, configuration, calibration, maintenance procedures and quality assessment. To this aim, two separate hardware and software tools were developed in order to test and simultaneously intercompare several oxygen probes and fluorometers/turbidimeters, respectively in the same environmental conditions, with a configuration as close as possible to real in-situ deployment. The chamber designed to perform chlorophyll-a and turbidity tests allowed for the simultaneous acquisition of analogue and digital signals of several sensors at the same time, so it was sufficiently compact to be used in both laboratory and onboard vessels. Methodologies and best practice committed to the intercomparison of dissolved oxygen sensors and fluorometers/turbidimeters have been used, which aid in the promotion of interoperability to access key infrastructures, such as ocean observatories and calibration facilities. Results from laboratory tests as well as field tests in the Mediterranean Sea are presented. [ABSTRACT FROM AUTHOR]

The growing need for interoperability among the different oceanic monitoring systems to deliver services able to answer the requirements of stakeholders and end-users led to the development of a low-cost machine-to-machine communication system able to guarantee data reliability over marine paths. In this framework, an experimental evaluation of the performance of long-range (LoRa) technology in a fully operational marine scenario has been proposed. In-situ tests were carried out exploiting the availability of (i) a passenger vessel and (ii) a research vessel operating in the Ligurian basin (North-Western Mediterranean Sea) both hosting end-nodes, and (iii) gateways positioned on mountains and hills in the inland areas. Packet loss ratio, packet reception rate, received signal strength indicator, signal to noise, and expected signal power ratio were chosen as metrics in line of sight and not the line of sight conditions. The reliability of Long Range Wide Area Network (LoRaWAN) transmission over the sea has been demonstrated up to more than 110 km in a free space scenario and for more than 20 km in a coastal urban environment. [ABSTRACT FROM AUTHOR]

Marine in situ gamma-ray spectrometry was utilized for a rainfall study at the W1M3A observing system in Ligurian Sea, Mediterranean Sea, Italy. From 7 June to 10 October 2016, underwater total gamma-ray counting rate (TCR) and the activity concentration of radon daughters 214Pb, 214Bi and potassium 40K were continuously monitored along with ambient noise and meteorological parameters. TCR was proven as a good rainfall indicator as radon daughters' fallout resulted in increased levels of marine radioactivity during and 2–3 h after the rainfall events. Cloud origin significantly affects TCR and radon progenies variations, as aerial mass trajectories, which extend upon terrestrial areas, result in higher increments. TCR and radon progenies concentrations revealed an increasing non-linear trend with rainfall height and intensity. 40K was proven to be an additional radio-tracer as its dilution was associated with rainfall height. 40K variations combined with 214Bi measurements can be used to investigate the mixing of rain- and seawater. In comparison with measurements in the atmosphere, the application of marine in situ gamma-ray spectrometry for precipitation investigation provided important advantages: allows quantitative measurement of the radionuclides; 40K can be used, along with radon daughters, as a radio-tracer; the mixing of rain- and seawater can be associated with meteorological parameters. [ABSTRACT FROM AUTHOR]

Current measurements in the open sea are generally acquired by Acoustic Doppler Current Profilers (ADCPs). In the case of ADCPs mounted on spar buoy, current profiles require to be post-processed, to properly take into account the buoy influence: in fact, ADCP compass may reflect alterations induced by the metal structure of the buoy and apparent currents can occur due to the large displacement of the platform. Uncertainty analysis is finally required to properly consider both these effects and to compute robust velocity estimates. A new methodology is tested for a measurement station in the Ligurian Sea, where an ADCP was mounted on the surface buoy of the W1-M3A (Western 1 Mediterranean Moored Multisensor Array) oceanographic observatory, facing upwards at the depth of about 40 m. Marine current numerical models and historical data in the area have been used as a basis for comparison to test the consistency of the proposed method. A very good agreement is obtained. Only minor discrepancies are reported (e.g., monthly averages from the reference model slightly underestimate the west-east current component along the entire profile), but, in general, the application of the proposed methodology ensures that the spar buoy-mounted ADCP system is able to provide reliable measurements for oceanographic studies and validation of 3D hydrodynamic models. [ABSTRACT FROM AUTHOR]

In the context of the Copernicus Program, EUMETSAT prioritizes the creation of an ocean color infrastructure for system vicarious calibration (OC-SVC). This work aims to reply to this need by proposing the European Radiometry Buoy and Infrastructure (EURYBIA). EURYBIA is designed as an autonomous European infrastructure operating within the Marine Optical Network (MarONet) established by University of Miami (Miami, FL, USA) based on the Marine Optical Buoy (MOBY) experience and NASA support. MarONet addresses SVC requirements in different sites, consistently and in a traceable way. The selected EURYBIA installation is close to the Lampedusa Island in the central Mediterranean Sea. This area is widely studied and hosts an Atmospheric and Oceanographic Observatory for long-term climate monitoring. The EURYBIA field segment comprises off-shore and on-shore infrastructures to manage the observation system and perform routine sensors calibrations. The ground segment includes the telemetry center for data communication and the processing center to compute data products and uncertainty budgets. The study shows that the overall uncertainty of EURYBIA SVC gains computed for the Sentinel-3 OLCI mission under EUMETSAT protocols is of about 0.05% in the blue-green wavelengths after a decade of measurements, similar to that of the reference site in Hawaii and in compliance with requirements for climate studies. [ABSTRACT FROM AUTHOR]

A long-term time series of high-frequency sampled sea-level data collected in the port of Genoa were analyzed to detect the occurrence of meteotsunami events and to characterize them. Time-frequency analysis showed well-developed energy peaks on a 26–30 minute band, which are an almost permanent feature in the analyzed signal. The amplitude of these waves is generally few centimeters but, in some cases, they can reach values comparable or even greater than the local tidal elevation. In the perspective of sea-level rise, their assessment can be relevant for sound coastal work planning and port management. Events having the highest energy were selected for detailed analysis and the main features were identified and characterized by means of wavelet transform. The most important one occurred on 14 October 2016, when the oscillations, generated by an abrupt jump in the atmospheric pressure, achieved a maximum wave height of 50 cm and lasted for about three hours. [ABSTRACT FROM AUTHOR]

The regions surrounding the North West Mediterranean Sea are often sites of intense precipitation events, particularly during the autumn months. The many casualties and the high economic costs due to these events demand a continuous improvement in forecasting models in support of early warning systems. The main weather conditions that determine episodes of heavy rain over these regions are known, but the high number of processes and interactions taking place at different time and space scales makes it extremely difficult to increase the skill pertaining to their predictability. To deepen the knowledge of the phenomena, both numerical simulations and analysis of historical data sets are required. This paper presents the analysis of a five-year-long time series of rain data collected in the open Ligurian Sea from the fixed platform W1M3A and coastal stations. The analysis aims to characterize the main features of the precipitation over this area and its seasonal and annual variability. Furthermore, the work includes a description of the main atmospheric and oceanic surface parameters measured from the platform during some intense events that occurred in the period 2009–2013 and suggests to what extent offshore observations may contribute to improve the forecast of rainfall events. [ABSTRACT FROM AUTHOR]