Search

The interaction between (PNP)PdH (1); PNP = bis(2-diisopropylphosphino-4-methylphenyl)amide and different acids (CF3SO3H, HBF4∙Et2O, fluorinated alcohols and formic acid) was studied in benzene or toluene as well as in neat alcohols by IR and NMR spectroscopies. The structures of hydrogen-bonded complexes were also optimized at the DFT/ωB97-XD/def2-TZVP level. The nitrogen atom of the amidophosphine pincer ligand readily accepts proton not only from strong Brønsted acids but from relatively weak fluorinated alcohols. That suggests that binding to palladium(II) increases the diarylamine basicity, making it a strong base. Nevertheless, H+ can be taken from [(PN(H)P)PdH]+ (2) by pyridine or hexamethylphosphoramide (HMPA). These observations confirm the need for a shuttle base to form [(PN(H)P)PdH]+ (2) as the result of the heterolytic splitting of H2 by [(PNP)Pd]+. At that, a stoichiometric amount of formic acid protonates a hydride ligand yielding an unstable η2-H2 complex that rapidly converts into formate (PNP)Pd(OCHO), which loses CO2 to restore (PNP)PdH, whereas the relatively high acid excess hampers this reaction through competitive protonation at nitrogen atom. [ABSTRACT FROM AUTHOR]

Acid-base characteristics (acidity, pKa, and hydricity, ΔG°H− or kH−) of metal hydride complexes could be a helpful value for forecasting their activity in various catalytic reactions. Polarity of the M–H bond may change radically at the stage of formation of a non-covalent adduct with an acidic/basic partner. This stage is responsible for subsequent hydrogen ion (hydride or proton) transfer. Here, the reaction of tricarbonyl manganese hydrides mer,trans–[L2Mn(CO)3H] (1; L = P(OPh)3, 2; L = PPh3) and fac–[(L–L′)Mn(CO)3H] (3, L–L′ = Ph2PCH2PPh2 (dppm); 4, L–L′ = Ph2PCH2–NHC) with organic bases and Lewis acid (B(C6F5)3) was explored by spectroscopic (IR, NMR) methods to find the conditions for the Mn–H bond repolarization. Complex 1, bearing phosphite ligands, features acidic properties (pKa 21.3) but can serve also as a hydride donor (ΔG≠298K = 19.8 kcal/mol). Complex 3 with pronounced hydride character can be deprotonated with KHMDS at the CH2–bridge position in THF and at the Mn–H position in MeCN. The kinetic hydricity of manganese complexes 1–4 increases in the order mer,trans–[(P(OPh)3)2Mn(CO)3H] (1) < mer,trans–[(PPh3)2Mn(CO)3H] (2) ≈ fac–[(dppm)Mn(CO)3H] (3) < fac–[(Ph2PCH2NHC)Mn(CO)3H] (4), corresponding to the gain of the phosphorus ligand electron-donor properties. [ABSTRACT FROM AUTHOR]

Bis(diphenylphosphino)methane copper(I) tetrahydroborate was synthesized by ligands exchange in bis(triphenylphosphine) copper(I) tetrahydroborate, and characterized by XRD, FTIR, NMR spectroscopy. According to XRD the title compound has dimeric structure, [(μ2-dppm)2Cu2(η2-BH4)2], and crystallizes as CH2Cl2 solvate in two polymorphic forms (orthorhombic, 1, and monoclinic, 2) The details of molecular geometry and the crystal-packing pattern in polymorphs were studied. The rare Twisted Boat-Boat conformation of the core Cu2P4C2 cycle in 1 is found being more stable than Boat-Boat conformation in 2. [ABSTRACT FROM AUTHOR]

The mechanism of the consecutive halogenation of the tetrahydroborate anion [BH4]− by hydrogen halides (HX, X = F, Cl, Br) and hexahydro-closo-hexaborate dianion [B6H6]2− by HCl via electrophile-induced nucleophilic substitution (EINS) was established by ab initio DFT calculations [M06/6-311++G(d,p) and wB97XD/6-311++G(d,p)] in acetonitrile (MeCN), taking into account non-specific solvent effects (SMD model). Successive substitution of H− by X− resulted in increased electron deficiency of borohydrides and changes in the character of boron atoms from nucleophilic to highly electrophilic. This, in turn, increased the tendency of the B–H bond to transfer a proton rather than a hydride ion. Thus, the regularities established suggested that it should be possible to carry out halogenation more selectively with the targeted synthesis of halogen derivatives with a low degree of substitution, by stabilization of H2 complex, or by carrying out a nucleophilic substitution of B–H bonds activated by interaction with Lewis acids (BL3). [ABSTRACT FROM AUTHOR]

In this short review, we attempt to unfold various aspects of excited-state intramolecular proton transfer (ESIPT) from the studies that are available up to date. Since Weller's discovery of ESIPT in salicylic acid (SA) and its derivative methyl salicylate (MS), numerous studies have emerged on the topic and it has become an attractive field of research because of its manifold applications. Here, we discuss some critical aspects of ESIPT and tautomerization from the mechanistic viewpoint. We address excitation wavelength dependence, anti-Kasha ESIPT, fast and slow ESIPT, reversibility and irreversibility of ESIPT, hydrogen bonding and geometrical factors, excited-state double proton transfer (ESDPT), concerted and stepwise ESDPT. [ABSTRACT FROM AUTHOR]

Thermodynamic hydricity (HDAMeCN) determined as Gibbs free energy (ΔG°[H]−) of the H− detachment reaction in acetonitrile (MeCN) was assessed for 144 small borane clusters (up to 5 boron atoms), polyhedral closo-boranes dianions [BnHn]2−, and their lithium salts Li2[BnHn] (n = 5–17) by DFT method [M06/6-311++G(d,p)] taking into account non-specific solvent effect (SMD model). Thermodynamic hydricity values of diborane B2H6 (HDAMeCN = 82.1 kcal/mol) and its dianion [B2H6]2− (HDAMeCN = 40.9 kcal/mol for Li2[B2H6]) can be selected as border points for the range of borane clusters' reactivity. Borane clusters with HDAMeCN below 41 kcal/mol are strong hydride donors capable of reducing CO2 (HDAMeCN = 44 kcal/mol for HCO2−), whereas those with HDAMeCN over 82 kcal/mol, predominately neutral boranes, are weak hydride donors and less prone to hydride transfer than to proton transfer (e.g., B2H6, B4H10, B5H11, etc.). The HDAMeCN values of closo-boranes are found to directly depend on the coordination number of the boron atom from which hydride detachment and stabilization of quasi-borinium cation takes place. In general, the larger the coordination number (CN) of a boron atom, the lower the value of HDAMeCN. [ABSTRACT FROM AUTHOR]

The mononuclear zinc(II) complex cis-[ZnL2(H2O)2] (1; L = 4-(pyridin-3-ylcarbamoyl)benzoate) was synthesized and characterized. By soaking crystals of 1 in a mixture of DMF-H2O solution containing a slight excess of Cu(NO3)2 × 3H2O a transmetalation reaction occurred affording the related copper(II) complex trans-[CuL2(H2O)2] (2). The structures of the compounds were authenticated by single crystal X-ray diffraction revealing, apart from a change in the isomerism, an alteration in the relative orientation of the chelating carboxylate groups and of the pyridine moieties. H-bond interactions stabilize both geometries and expand them into two-dimensional (2D) networks. The transmetalation was confirmed by SEM–EDS analysis. Moreover, the thermodynamic feasibility of the transmetalation is demonstrated by density-functional theory (DFT) studies. The catalytic activities of 1 and 2 for the oxidation of styrene and for the nitroaldol (Henry) C-C coupling reaction were investigated. The copper(II) compound 2 acts as heterogeneous catalyst for the microwave-assisted oxidation of styrene with aqueous hydrogen peroxide, yielding selectively (>99%) benzaldehyde up to 66% of conversion and with a turnover frequency (TOF) of 132 h−1. The zinc(II) complex 1 is the most active catalyst (up to 87% yield) towards the nitroaldol (Henry) coupling reaction between benzaldehyde and nitro-methane or -ethane to afford the corresponding β-nitro alcohols. The reaction of benzaldehyde with nitroethane in the presence of 1 produced 2-nitro-1-phenylpropanol in the syn and the anti diastereoisomeric forms, with a considerable higher selectivity towards the former (66:34). [ABSTRACT FROM AUTHOR]

Ruthenocene-based PCPtBu pincer ligands were used to synthesize novel pincer palladium chloride RcF[PCPtBu]PdCl (2a) and two novel palladium tetrahydroborates RcF[PCPtBu]Pd(BH4) (3a) and Rc*[PCPtBu]Pd(BH4) (3b), where RcF[PCPtBu] = κ3-{2,5-(tBu2PCH2)2-C5H2}Ru(CpF) (CpF = C5Me4CF3), and Rc*[PCPtBu] = κ3-{2,5-(tBu2PCH2)2C5H2}Ru(Cp*) (Cp* = C5Me5). These coordination compounds were characterized by X-ray, NMR and FTIR techniques. Analysis of the X-ray data shows that an increase of the steric bulk of non-metalated cyclopentadienyl ring in 3a and 3b relative to non-substituted Rc[PCPtBu]Pd(BH4) analogue (3c; where Rc[PCPtBu] = κ3-{2,5-(tBu2PCH2)2C5H2}Ru(Cp), Cp = C5H5) pushes palladium atom from the middle plane of the metalated Cp ring in the direction opposite to the ruthenium atom. This displacement increases in the order 3c < 3b < 3a following the order of the Cp-ring steric volume increase. The analysis of both X-ray and IR data suggests that BH4 ligand in both palladium tetrahydroborates 3a and 3b has the mixed coordination mode η1,2. The strength of the BH4 bond with palladium atom increases in the order Rc[PCPtBu]Pd(BH4) < Rc*[PCPtBu]Pd(BH4) < RcF[PCPtBu]Pd(BH4) that appears to be affected by both steric and electronic properties of the ruthenocene moiety. [ABSTRACT FROM AUTHOR]