Search

Frequency control is one of the most important tasks in electric power systems. At the same time, in modern power systems with inertia-free converter-interfaced generation, this task has become more complex. Such an issue is especially relevant for microgrids, which are characterized by a significant increase in the rate of change of frequency and its nadir or zenith. An effective way is through the use of energy storage systems (ESSs) with a grid-forming control in microgrids. For this purpose, this paper proposes a novel structure of the control algorithm based on a current-control virtual synchronous generator (CC-VSG), in which the damping is performed using a feedforward controller. In addition, a simple proportional–integral controller is added to the CC-VSG structure to control the state of charge of the ESS. The performed frequency analysis proves the independence of the different control loop operations within the developed CC-VSG. At the same time, a methodology based on the bandwidth separation of different control loops is proposed for the CC-VSG tuning, which allows for the achievement of the desired quality of frequency regulation in the microgrid, taking into account both the energy recovery and the permissible frequency variation. Finally, the time-domain simulation using PSCAD/EMTDC is performed to confirm the obtained results. [ABSTRACT FROM AUTHOR]

In modern converter-dominated power systems, total inertia is very variable and depends on the share of power generated by renewable-based converter-interfaced generation (CIG) at each specific moment. As a result, the limits required by the grid codes on the rate of change of frequency and its nadir or zenith during disturbances become challenging to achieve with conventional control approaches. Therefore, the transition to a novel control strategy of CIG with a grid-forming power converter is relevant. For this purpose, a control algorithm based on a virtual synchronous generator (VSG) is used, which simulates the properties and capabilities of a conventional synchronous generation. However, due to continuously changing operating conditions in converter-dominated power systems, the virtual inertia formed by VSG must be adaptive. At the same time, the efficiency of adaptive algorithms strongly depends on the used VSG structure. In this connection, this paper proposes an enhanced VSG structure for which the transfer function of the active power control loop was formed. With the help of it, the advantages over the conventional VSG structure were proven, which are necessary for the effective adaptive control of the VSG parameters. Then, the analysis of the impact of the VSG parameters on the dynamic response using the transient characteristics in the time domain was performed. Based on the results obtained, adaptive algorithms for independent control of the virtual inertia and the parameters of the VSG damper winding were developed. The performed mathematical modeling confirmed the reliable and effective operation of the developed adaptive control algorithms and the enhanced VSG structure. The theoretical and experimental results obtained in this paper indicate the need for simultaneous development and improvement of both adaptive control algorithms and VSG structures used for this purpose. [ABSTRACT FROM AUTHOR]