Search

Cu2Sn1-xGexS3 (CTGS) is a compound composed of relatively abundant elements in the crust of the earth. The band gap of CTGS can be tuned by substituting elements at the Sn and Ge sites, making it an attractive material for low-environmental-impact solar cells. In this study, CTGS thin films were fabricated with a controlled [Ge]/([Ge] + [Sn]) composition ratio (x) by combining the co-evaporation method and sulfurization in an infrared furnace. Furthermore, the effect of Na on the CTGS and changes in the solar cell properties were investigated by stacking and sulfurizing NaF on the precursor fabricated using the co-evaporation method. As a result, CTGS with varying x was successfully fabricated by varying the deposition time of the Cu2GeS3 layer using co-evaporation. Additionally, CTGS prepared by doping with Na showed enlarged CTGS crystals compared to Na-free CTGS. The fabricated CTGS solar cells achieved a power conversion efficiency of more than 4.5% after doping with Na. [ABSTRACT FROM AUTHOR]

In this study, as a novel approach to thin-film solar cells based on tin sulfide, an environmentally friendly material, we attempted to fabricate (Ge, Sn)S thin films for application in multi-junction solar cells. A (Ge0.42 Sn0.58)S thin film was prepared via co-evaporation. The (Ge0.42 Sn0.58)S thin film formed a (Ge, Sn)S solid solution, as confirmed by X-ray diffraction (XRD) and Raman spectroscopy analyses. The open circuit voltage (Voc), short circuit current density (Jsc), fill factor (FF), and power conversion efficiency (PCE) of (Ge0.42 Sn0.58)S thin-film solar cells were 0.29 V, 6.92 mA/cm2, 0.34, and 0.67%, respectively; moreover, the device showed a band gap of 1.42–1.52 eV. We showed that solar cells can be realized even in a composition range with a relatively higher Ge concentration than the (Ge, Sn)S solar cells reported to date. This result enhances the feasibility of multi-junction SnS-system thin-film solar cells. [ABSTRACT FROM AUTHOR]

Ag8SnS6 (ATS) has been reported to have a band gap of 1.33 eV and is expected to be a suitable material for the light-absorbing layers of compound thin-film solar cells. However, studies on solar cells that use ATS are currently lacking. The objective of this study is to obtain high-quality ATS thin films for the realization of compound thin-film solar cells using vacuum deposition and sulfide annealing. First, glass/SnS/Ag stacked precursors are prepared by vacuum deposition. Subsequently, they are converted to the ATS phase via sulfide annealing, and various process conditions, namely, annealing time, annealing temperature, and number of steps, are studied. By setting the heat treatment temperature at 550 °C and the heat treatment time at 60 min, a high-quality ATS thin film could be obtained. Multi-step heat treatment also produces thin films with nearly no segregation or voids. [ABSTRACT FROM AUTHOR]