Search

The ocular mucosa (OM) is an important and unique part of the vertebrate mucosal immune system. The OM plays an important role in maintaining visual function and defending against foreign antigens or microorganisms, while maintaining a balance between the two through complex regulatory mechanisms. However, the function of ocular mucosal defense against foreign pathogens and mucosal immune response in bony fish are still less studied. To acquire deeper understanding into the mucosal immunity of the OM in teleost fish, we established a study of the immune response of rainbow trout (Oncorhynchus mykiss) infected with the infectious hematopoietic necrosis virus (IHNV). Our findings revealed that IHNV could successfully infiltrate the trout's OM, indicating that the OM could be an important portal for the IHNV. Furthermore, qPCR and RNA-Seq analysis results showed that a large number of immune-related genes were significantly upregulated in the OM of trout with IHNV infection. Critically, the results of our RNA-Seq analysis demonstrated that viral infection triggered a robust immune response, as evidenced by the substantial induction of antiviral, innate, and adaptive immune-related genes in the OM of infected fish, which underscored the essential role of the OM in viral infection. Overall, our findings revealed a previously unknown function of teleost OM in antiviral defense, and provided a theoretical basis for the study of the mucosal immunity of fish. [ABSTRACT FROM AUTHOR]

This study investigates the UV degradation of black Chinese lacquer by incorporating carbon black and ferrous hydroxide as additives. The purpose of this research is to understand the effects of these additives on the degradation behavior of the lacquer film. Different concentrations of carbon black powder (1%, 3%, and 5%) and Fe(OH)2 (10%, 20%, and 30%) were added to the lacquer following traditional techniques. The main methods employed for analysis were gloss loss measurement, color change assessment, SEM imaging, FTIR spectroscopy, and XPS analysis. The results demonstrate a significant decrease in gloss levels and an increase in lightness values with increasing ultraviolet exposure time. SEM images reveal the formation of cracks in the lacquer film. FTIR analysis indicates oxidation of the urushiol side chain and an increase in oxidation products. The infrared difference spectrum highlights the differences between the additives, with Fe(OH)2 showing a lower impact on the spectra compared to carbon black. XPS analysis confirms the oxidation of the C-H functional group and the presence of C-O-C and C-OH groups. In conclusion, this study sheds light on the influence of carbon black and ferrous hydroxide additives on the UV degradation of black Chinese lacquer and suggests the protective effect of Fe(OH)2 against UV aging. These findings contribute to a better understanding of the degradation mechanisms and provide insights for improving the UV resistance of Chinese lacquer coatings. Further research can explore alternative additives and optimization strategies to mitigate UV-induced degradation. [ABSTRACT FROM AUTHOR]

Luoyang No.1 is a Qing Dynasty (1644–1902) inland river ancient wooden shipwreck discovered in September 2013. It adds significantly to the study of Grand Canal transport history and Luoyang's economic history. The wood characteristics of Luoyang No.1 were investigated in this study using chemical compositions, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nano-indentation (NI), and scanning electron microscopy (SEM). The results showed that the holocellulose content was only 32.84–37.69%, indicating that the cellulose and hemicellulose had been seriously degraded. Based on the XRD pattern, the degree of crystallinity of cellulose in wood ranged from 19.82 to 22.83%. The nano-indentation demonstrated that compared with the undegraded contemporary wood, the elastic modulus and hardness of the ancient ship wood decreased by 45.5% and 32.1%, respectively. Furthermore, the FTIR spectra revealed that the biological deterioration of ancient wood was indicated by a decrease in the peaks related to cellulose and hemicellulose, but the change in lignin was insignificant. The results could provide knowledge for appropriate dewatering, strengthening, restoration strategies and regulation of the museum environment. [ABSTRACT FROM AUTHOR]

Huaguangjiao I refers to the ancient Chinese wooden shipwreck of the South Song Dynasty (1127–1279 AD) discovered in the South China Sea in 1996. From 2008 to 2017, the archaeological waterlogged wood was desalted using deionized water combined with ultrasonic treatment, and desalted using EDTA-2Na, EDTAHO, and NaH2PO4·2H2O solutions. In this paper, the degree of degradation of the modified waterlogged archaeological wood and the moisture and content of the main components were determined. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nanoindentation (NI), and scanning electron microscopy (SEM) were employed to investigate the state of wood degradation after desalination and desulfurization. The results showed that the water content of the wood was as high as 532~1149%, while the basic density was only 0.14~0.18 g/cm3, indicating that the wood had been seriously degraded. The holocellulose content was only 36–40%. Based on the XRD patterns, the degree of cellulose crystallinity in the modified wood was 14.08%. The elastic modulus and hardness of the ancient shipwreck wood after desalination and desulfurization were 1.28–4.31 and 0.10–0.28 GPa, respectively, according to nanoindentation. In addition, the FTIR spectra revealed that the biological deterioration of the modified wood caused cellulose and hemicellulose degradation, but no apparent lignin alteration occurred. The results could provide knowledge for appropriate dewatering, strengthening, and restoration strategies. [ABSTRACT FROM AUTHOR]

In this study, wood samples extracted from the Taicang ancient ship, dating back to the Yuan Dynasty, were investigated to study the characteristics of waterlogged archaeological wood. The macroscopic characteristics and microscopic structures were used to identify the wood species. To assess the degree of degradation of the waterlogged archaeological wood, X-ray diffraction (XRD), nanoindentation (NI), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were used to compare the new and ancient wood samples from the same species. The microscopic structures of the samples were identified as Pinus massoniana. The XRD and nanoindentation results revealed that the crystallinity index of the cellulose decreased from 41.07% to 33.85%, the elastic modulus was reduced by 20.90%, and hardness was reduced by 55.6% compared with the new wood. The FTIR spectra revealed that biological deterioration occurred in the cellulose and hemicellulose, but there was no noticeable change in the lignin content. These results provide helpful information for the conservation and restoration of ancient ships. [ABSTRACT FROM AUTHOR]

This study explores the impact of China's low-carbon city policy on employment using a quasi-natural experiment approach based on microdata from A-share listed companies (2007–2021). The findings indicate a statistically significant positive effect on employment levels, with an average increase of 7.27% in pilot compared to non-pilot cities. This boost in employment is primarily linked to green innovation, improved financing conditions, and increased sales activities. The policy disproportionately benefits high-skilled workers and positively affects employment in sales, research and development, and management while having a lesser impact on low-skilled and production workers. The employment gains are particularly significant in non-polluting sectors, regions with high marketization, and in the eastern areas of China. This study underscores the complex interplay between environmental policies and labor markets, emphasizing the need for skill differentiation in policy frameworks. [ABSTRACT FROM AUTHOR]

Introducing a new potential, we deduce a general Lagrangian for Dirac-Born- Infeld (DBI) inflation, in which the determinant of the induced metric naturally includes the kinetic energy and the potential energy. In particular, the potential energy and kinetic energy can convert into each other at any same order, which is in agreement with the limit of classical physics. We also present a general sound speed in the evolutions of the universe, and the exact expressions of energy-momentum tensor, pressure and density. Furthermore, from the results we obtain the new equation of states. The analytic form of the action that is consistent with data turns out to be surprisingly simple and easy to categorize. Finally, we examine properties of the dark energy and introduce a novel mechanism for realizing either quintessence or phantom dark energy dominated phases within a string theoretical context. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method for the analysis of tectonic movement and crustal deformation by using GNSS baseline length change rates or baseline linear strain rates. The method is applied to daily coordinate solutions of continuous GNSS stations of the Crustal Movement Observation Network of China (CMONOC). The results show that: (a) The baseline linear strain rates are uneven in space, which is prominent in the Tianshan, Sichuan-Yunnan, Qinghai-Tibet Plateau, and Yanjing areas, with a maximum value of 1 × 10−7 a−1, and about two orders smaller in the South China block, the Northeast block, and the inner area of the Tarim basin, where the average baseline linear strain rates are 1.471 × 10−9 a−1, 2.242 × 10−9 a−1, and 3.056 × 10−9 a−1, respectively; (b) Active crustal deformation and strong earthquakes in the Xinjiang area are mainly located in the north and south sides of the Tianshan block; the compression deformations both inside the Tarim block and in the southern Tianshan fault zone are all increasing from east to west, and the Tarim block is not a completely "rigid block", with the shrinkage rate in the west part at about 1~2 mm/a; (c) The principal directions of crustal deformation in the Xinjiang, Tibet, and Sichuan-Yunnan regions are generally in the north—south compression and east—west extension, indicating that the collision and wedging between the Indian and Eurasian plates are still the main source of tectonic movements in mainland China. [ABSTRACT FROM AUTHOR]

Phenylalanine ammonia-lyase (PAL) is an essential enzyme in the phenylpropanoid pathway, in which numerous aromatic intermediate metabolites play significant roles in plant growth, adaptation, and disease resistance. Cultivated peanuts are highly susceptible to Aspergillus flavus L. infection. Although PAL genes have been characterized in various major crops, no systematic studies have been conducted in cultivated peanuts, especially in response to A. flavus infection. In the present study, a systematic genome-wide analysis was conducted to identify PAL genes in the Arachis hypogaea L. genome. Ten AhPAL genes were distributed unevenly on nine A. hypogaea chromosomes. Based on phylogenetic analysis, the AhPAL proteins were classified into three groups. Structural and conserved motif analysis of PAL genes in A. hypogaea revealed that all peanut PAL genes contained one intron and ten motifs in the conserved domains. Furthermore, synteny analysis indicated that the ten AhPAL genes could be categorized into five pairs and that each AhPAL gene had a homologous gene in the wild-type peanut. Cis-element analysis revealed that the promoter region of the AhPAL gene family was rich in stress- and hormone-related elements. Expression analysis indicated that genes from Group I (AhPAL1 and AhPAL2), which had large number of ABRE, WUN, and ARE elements in the promoter, played a strong role in response to A. flavus stress. [ABSTRACT FROM AUTHOR]

The capability of embryogenic callus induction is a prerequisite for in vitro plant regeneration. However, embryogenic callus induction is strongly genotype-dependent, thus hindering the development of in vitro plant genetic engineering technology. In this study, to examine the genetic variation in embryogenic callus induction rate (CIR) in peanut (Arachis hypogaea L.) at the seventh, eighth, and ninth subcultures (T7, T8, and T9, respectively), we performed genome-wide association studies (GWAS) for CIR in a population of 353 peanut accessions. The coefficient of variation of CIR among the genotypes was high in the T7, T8, and T9 subcultures (33.06%, 34.18%, and 35.54%, respectively), and the average CIR ranged from 1.58 to 1.66. A total of 53 significant single-nucleotide polymorphisms (SNPs) were detected (based on the threshold value −log10(p) = 4.5). Among these SNPs, SNPB03-83801701 showed high phenotypic variance and neared a gene that encodes a peroxisomal ABC transporter 1. SNPA05-94095749, representing a nonsynonymous mutation, was located in the Arahy.MIX90M locus (encoding an auxin response factor 19 protein) at T8, which was associated with callus formation. These results provide guidance for future elucidation of the regulatory mechanism of embryogenic callus induction in peanut. [ABSTRACT FROM AUTHOR]

The Niukutou Pb-Zn deposit is typical of skarn deposits in the Qimantagh metallogenic belt (QMB) in the East Kunlun Mountains. In this study, based on detailed petrographical observations, electron microprobe analyses (EMPAs), and laser-ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) analyses, we report the major and trace element compositions of the typical skarn mineral assemblages (garnet, pyroxene, ilvaite, epidote, and chlorite) in this deposit. Three hydrothermal mineralization stages with different mineral assemblages of the prograde metamorphic phase were determined, which were distributed from the inside to the outside of the ore-forming rock mass. Grt1+Px1 (Stage 1), Grt2+Px2 (Stage 2), and Px3 (Stage 3) were distinguished in the Niukutou deposit. Furthermore, the ilvaites in the retrograde metamorphic phase can be divided into three stages, namely Ilv1, Ilv2, and Ilv3. The ore-forming fluid in Stage 1 exhibited high ∑REE, U, and Nd concentrations and δEu, δCe, and LREE/HREE values, which were likely derived from a magmatic–hydrothermal source and formed at high temperatures, high fO2 values, and mildly acidic pH conditions, and probably experienced diffusive metasomatism in a closed system with low water/rock ratios. In Stages 2 and 3, the ore-forming exhibited lower ∑REE, U, and Nd concentrations and δEu, δCe, and LREE/HREE values, with high Mn content that had likely experienced infiltrative metasomatism in an open system with high water/rock ratios. From Ilv1 to Ilv3, the δEu and U contents decreased, whereas the Mn content increased, indicating that the oxygen fugacity of mineralization was in decline. The ore-forming fluid evolution of the Niukutou deposit can be characterized as follows: from Stage 1 to Stage 3, the hydrothermal fluid migrated from the deep plutons to the shallow skarn and marble; the environment altered from the high fO2 and temperature conditions to low fO2 and temperature values, and the pH and Mn contents increased. The fluids contained considerable metal ore-forming materials that were favorable for the enrichment and precipitation of the Fe content. In the retrograde metamorphic phase, with the decrease in oxygen fugacity (from Ilv1 to Ilv3), the temperature and oxygen fugacity of the theore-forming fluid environment decreased, ultimately becoming conducive to the dissolution and precipitation of Pb and Zn elements. [ABSTRACT FROM AUTHOR]

Nitrogen, one of the essential elements, is a key determinant for improving peanut growth and yield. GATA zinc finger transcription factors have been found to be involved in regulation of nitrogen metabolism. However, a systematic characterization of the GATA gene family and patterns of their expression under different nitrogen levels remains elusive. In this study, a total of 45 GATA genes distributed among 17 chromosomes were identified in the peanut genome and classified into three subfamilies I, II and III with 26, 13 and 6 members, respectively, whose physicochemical characteristics, gene structures and conserved motifs were also analyzed. Furthermore, the optimal level of nitrogen fertilizer on the growth of peanut cultivar Yuhua 23 was determined by pod yield and value cost ratio from 2020 to 2022, and the results revealed that 150 kg hm−2 nitrogen was the best for cultivation of peanut Yuhua 23 because of its highest pod yield and relatively higher VCR of more than four. In addition, expression patterns of peanut GATA genes under different nitrogen levels were detected by real-time quantitative PCR and several GATA genes were significantly changed under a nitrogen level of 150 kg hm−2. Overall, the above results would be helpful for further understanding biological functions of the GATA gene family in cultivated peanut. [ABSTRACT FROM AUTHOR]

High oleic acid peanut (HOAP) is extensively embraced in China because of its high nutritional value and enhanced oxidative stability. However, its dissemination has been severely constrained in high altitude and high latitude areas due to chilling stress during sowing, resulting in significant yield loss in these regions. Despite the lack of understanding of the molecular mechanisms underlying low temperature germination (LTG) in HOAP, discovering the quantitative trait loci (QTL) that confer this trait will undoubtedly benefit breeding efforts. In the present study, we identified putative genomic regions and single nucleotide polymorphisms (SNPs) that govern LTG tolerance of HOAP in an F2 population derived from the cross of chilling-tolerant YH65 and chilling-sensitive FL14 using bulk segregant analysis (BSA). Analysis of ΔSNP-index and Euclidean distance (ED) value association pinpointed the overlapped region to a 2.29 Mb interval on chromosome A05. The candidate interval showed that 122 genes were significantly related to response to abiotic stress and plant–pathogen interaction. Furthermore, an SNP site associated with LTG tolerance was discovered. The SNP site was employed as a Kompetitive Allele Specific PCR (KASP) marker and validated in a universal peanut panel. These findings may provide valuable insight into the molecular mechanism underpinning LTG tolerance and facilitate marker-assisted selective breeding in HOAP. [ABSTRACT FROM AUTHOR]

The gibberellic acid-stimulated Arabidopsis (GASA) gene family is essential for plant growth and development, hormone level control, and phytohormone signal transmission. Different plants have been shown to contain numerous GASA homologs. However, there is no knowledge about these proteins in peanuts. In the current study, we performed a thorough bioinformatics and expression analysis and found 20, 22, and 40 GASA genes by genome-wide analyses of A. hypogaea L., A. duranensis, and A. ipaensis, respectively. We analyzed and predicted the physical properties of these genes. Based on the results of our phylogenetic analysis, the evolutionary tree constructed from the 40 AhGASA proteins was divided into seven categories, forming a total of 14 gene pairs. According to our observations, tandem duplication is a significant factor in the expansion of the GASA gene family. AhGASA was unevenly distributed on 20 chromosomes, and 17 tandem duplicated genes were identified. A co-lineage analysis with the A/B subgenome identified 69 linear/parallel homologous gene pairs. A cis-element analysis revealed that the AhGASA protein is crucial for hormone responsiveness. In materials with different size traits at various stages of peanut pod development, transcriptomics and RT-qPCR analyses revealed that AhGASA genes are expressed at various levels and are tissue-specific. This finding suggests that some AhGASA genes may be involved in controlling peanut pod size. This study suggests that GASA genes are crucial for controlling the development of peanut pods and provides the first systematic identification and analysis of GASA genes in peanut. These findings will help future research into the function of the GASA gene in the cultivated peanut. [ABSTRACT FROM AUTHOR]

Grain yield (GY) and grain protein content (GPC) are important traits for wheat breeding and production; however, they are usually negatively correlated. The Q gene is the most important domestication gene in cultivated wheat because it influences many traits, including GY and GPC. Allelic variations in the Q gene may positively affect both GY and GPC. Accordingly, we characterized two new Q alleles (Qs1 and Qc1-N8) obtained through ethyl methanesulfonate-induced mutagenesis. Compared with the wild-type Q allele, Qs1 contains a missense mutation in the sequence encoding the first AP2 domain, whereas Qc1-N8 has two missense mutations: one in the sequence encoding the second AP2 domain and the other in the microRNA172-binding site. The Qs1 allele did not significantly affect GPC or other processing quality parameters, but it adversely affected GY by decreasing the thousand kernel weight and grain number per spike. In contrast, Qc1-N8 positively affected GPC and GY by increasing the thousand kernel weight and grain number per spike. Thus, we generated novel germplasm relevant for wheat breeding. A specific molecular marker was developed to facilitate the use of the Qc1-N8 allele in breeding. Furthermore, our findings provide useful new information for enhancing cereal crops via non-transgenic approaches. [ABSTRACT FROM AUTHOR]

Gold leaf samples of different purities were corroded in a SO2 atmosphere at three different relative humidities (30%, 60%, 90%) at ambient temperature, and the effects on color, gloss, and morphology were studied. Results showed that a corrosion rate of 0.0898 g/cm2 could be attained after 6 weeks at high humidity. Color changes also occurred during the gold leaf corrosion process, and many thin pits formed on the surfaces, as shown by SEM. EDX results showed that these pits contained C, O, and S compounds. By comparing the results of different gold purity samples and different relative humidity conditions, it could be concluded that both gold content and humidity play an important role in SO2 atmosphere corrosion. These conclusions are helpful for the conservation of gold leaf decorative cultural relics. [ABSTRACT FROM AUTHOR]

Skarn Sn-polymetallic deposits, located in the southern Great Khingan Range, can be divided into Sn–Fe and Sn–Pb–Zn deposits. By systematically studying the geochemical characteristics of source granitoid and deposits, the ore-forming mechanisms were established, and the differences in ore-forming processes between Sn–Fe and Sn–Pb–Zn deposits are discussed. The main findings are as follows: (1) these two deposits were formed in the Late-Yanshanian period; (2) the source granitoid evolved at an early stage in a reducing environment, while the oxygen fugacity increased at a late stage through the influence of a deep-seated fault; (3) fine-grained syenogranite from Dashishan showed a higher degree of evolution than the syenogranite from Damogutu; (4) the Damogutu Sn–Fe and Dashishan Sn–Pb–Zn deposits shared a source of ore-forming fluid, and Fe, Sn, Pb, and Zn all derived from Late-Yanshanian granitoids; and (5) the ore-forming fluid experienced a continuous evolution process from the magmatic to hydrothermal stage, and the magmatic–hydrothermal transitional fluid played a very important role in skarnization and mineralization. [ABSTRACT FROM AUTHOR]

Amine groups play significant roles in polymeric composites for heavy metals removal. However, generating a composite with a large number of functional and stable amine groups based on clay is still a challenge. In this work, a new amine-functionalized adsorbent based on acid-activated vermiculite (a-Verm) was prepared by organic modification of silane coupling agent as bridge, followed by in situ polymerization of acrylamide (AM) and further grafting of triethylene tetramine (TETA). The obtained polymeric composite g-PAM/OVerm was characterized by scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Fourier transform infrared (FTIR), thermal analysis (TG/DTG), X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller (BET) analyses, confirming that amine groups were successfully grafted onto the surface of Verm. The efficacy g-PAM/OVerm for removing Pb(II) was tested. The adsorption equilibrium data on g-PAM/OVerm was in good accordance with the Langmuir adsorption isotherms, and the adsorption maximal value of Pb(II) was 219.4 mg·g−1. The adsorption kinetic data fit the pseudo-second-order kinetic model well. Additionally, g-PAM/OVerm has better selectivity for Pb(II) ion in comparison with Zn(II), Cd(II) and Cu(II) ions. The present work shows that g-PAM/OVerm holds great potential for removing Pb(II) from wastewater, and provides a new and efficient method for the removal of heavy metal ions from industrial wastewater. [ABSTRACT FROM AUTHOR]

Nicotinamide N-methyltransferase (NNMT) plays multiple roles in improving the aggressiveness of colorectal cancer (CRC) and enhancing resistance to 5-Fluorouracil (5-FU), making it an attractive therapeutic target. Curcumin (Cur) is a promising natural compound, exhibiting multiple antitumor effects and potentiating the effect of 5-FU. The aim of the present study is to explore the effect of Cur on attenuating NNMT-induced resistance to 5-FU in CRC. A panel of CRC cell lines with different NNMT expressions are used to characterize the effect of Cur. Herein, it is observed that Cur can depress the expression of NNMT and p-STAT3 in CRC cells. Furthermore, Cur can induce inhibition of cell proliferation, G2/M phase cell cycle arrest, and reactive oxygen species (ROS) generation, especially in high-NNMT-expression CRC cell lines. Cur can also re-sensitize high-NNMT-expression CRC cells to 5-FU both in vitro and in vivo. In summary, it is proposed that Cur can reverse NNMT-induced cell proliferation and 5-FU resistance through ROS generation and cell cycle arrest. Given that Cur has long been used, we suppose that Cur is a promising anticancer drug candidate with minimal side effects for human CRC therapy and can attenuate NNMT-induced resistance to 5-FU. [ABSTRACT FROM AUTHOR]

Carboniferous–Permian detrital zircons are recognized in the Upper Paleozoic of the whole Ordos Basin. Previous studies revealed that these Carboniferous–Permian zircons occurred in the Northern Ordos Basin mainly originated from the Yinshan Block. What has not been well documented until now is where this period's zircons in the Southern Ordos Basin came from, and very little discussion about their provenance. To identify the provenance of the detrital zircons dating from ~350 to 260 Ma, five sandstone samples from the Shan 1 Member of Shanxi Formation and eight sandstone samples from the He 8 Member of Shihezi Formation were analyzed for detrital zircon U-Pb age dating and in situ Lu-Hf isotopic compositions. The results indicate that the two age clusters of 520–378 Ma and ~350–260 Ma in the Southern Ordos Basin most likely derived from the North Qinling Orogenic Belt–North Qilian Orogenic Belt and the North Qinling Orogenic Belt, respectively. Furthermore, we propose that the zircons aging ~320–260 Ma are representative of the important tectonothermal events occurred in the North Qinling Orogenic Belt during the Late Paleozoic. [ABSTRACT FROM AUTHOR]