Search

This paper presents the parallelization of two widely used implicit numerical solvers for the solution of partial differential equations on structured meshes, namely, the ADI (Alternating-Direction Implicit) solver for tridiagonal linear systems and the SIP (Strongly Implicit Procedure) solver for the penta-diagonal systems. Both solvers were parallelized using CUDA (Computer Unified Device Architecture) Fortran on GPGPUs (General-Purpose Graphics Processing Units). The parallel ADI solver (P-ADI) is based on the Parallel Cyclic Reduction (PCR) algorithm, while the parallel SIP solver (P-SIP) uses the wave front method (WF) following a diagonal line calculation strategy. To map the solution schemes onto the hierarchical block-threads framework of the CUDA on the GPU, the P-ADI solver adopted two mapping methods, one block thread with iterations (OBM-it) and multi-block threads (MBMs), while the P-SIP solver also used two mappings, one conventional mapping using effective WF lines (WF-e) with matrix coefficients and solution variables defined on original computational mesh, and a newly proposed mapping using all WF mesh (WF-all), on which matrix coefficients and solution variables are defined. Both the P-ADI and the P-SIP have been integrated into a two-dimensional (2D) hydrodynamic model, the CCHE2D (Center of Computational Hydroscience and Engineering) model, developed by the National Center for Computational Hydroscience and Engineering at the University of Mississippi. This study for the first time compared these two parallel solvers and their efficiency using examples and applications in complex geometries, which can provide valuable guidance for future uses of these two parallel implicit solvers in computational fluids dynamics (CFD). Both parallel solvers demonstrated higher efficiency than their serial counterparts on the CPU (Central Processing Unit): 3.73~4.98 speedup ratio for flow simulations, and 2.166~3.648 speedup ratio for sediment transport simulations. In general, the P-ADI solver is faster than but not as stable as the P-SIP solver; and for the P-SIP solver, the newly developed mapping method WF-all significantly improved the conventional mapping method WF-e. [ABSTRACT FROM AUTHOR]

Enid Lake is one of the largest reservoirs located in Yazoo River Basin, the largest basin in the state of Mississippi. The lake was impounded by Enid Dam on the Yocona River in Yalobusha County and covers an area of 30 square kilometers. It provides significant natural and recreational resources. The soils in this region are highly erodible, resulting in a large amount of fine-grained cohesive sediment discharged into the lake. In this study, a 3D numerical model was developed to simulate the free surface hydrodynamics and transportation of cohesive sediment with a median diameter of 0.0025 to 0.003 mm in Enid Lake. Flow fields in the lake are generally induced by wind and upstream river inflow, and the sediment is also introduced from the inflow during storm events. The general processes of sediment flocculation and settling were considered in the model, and the erosion rate and deposition rate of cohesive sediment were calculated. In this model, the sediment simulation was coupled with flow simulation. In this research, remote sensing technology was applied to estimate the sediment concentration at the lake surface and provide validation data for numerical model simulation. The model results and remote sensing data help us to understand the transport, deposition and resuspension processes of cohesive sediment in large reservoirs due to wind-induced currents and upstream river flows. [ABSTRACT FROM AUTHOR]

In this paper, we assessed and compared land surface temperature (LST) in urban centers using data from Landsat, MODIS, and the Simple Biosphere model (SiB2). We also evaluated the sensitivity of the model's LST to different land cover types, fractions (percentages), and emissivities compared to reference points derived from Landsat thermal data. This was demonstrated in three climatologically- and morphologically-different cities of Atlanta, GA, New York, NY, andWashington, DC. Our results showed that in these cities SiB2 was sensitive to both the emissivity and the land cover type and fraction, but much more sensitive to the latter. The practical implications of these results are rather significant since they imply that the SiB2 model can be used to run different scenarios for evaluating urban heat island (UHI) mitigation strategies. This study also showed that using detailed emissivities per land cover type and fractions from Landsat-derived data caused a convergence of the model results towards the Landsat-derived LST for most of the studied cases. This study also showed that SiB2 LSTs are closer in magnitude to Landsat-derived LSTs than MODIS-derived LSTs. It is important, however, to emphasize that both Landsat and MODIS LSTs are not direct observations and, as such, do not represent a ground truth. More studies will be needed to compare these results to in situ LST data and provide further validation. [ABSTRACT FROM AUTHOR]

Turbidity is a commonly-used index of the factors that determine light penetration in the water column. Consistent estimation of turbidity is crucial to design environmental and restoration management plans, to predict fate of possible pollutants, and to estimate sedimentary fluxes into the ocean. Traditional methods monitoring fixed geographical locations at fixed intervals may not be representative of the mean water turbidity in estuaries between intervals, and can be expensive and time consuming. Although remote sensing offers a good solution to this limitation, it is still not widely used due in part to required complex processing of imagery. There are satellite-derived products, including the Moderate Resolution Imaging Spectroradiometer (MODIS) Terra surface reflectance daily product (MOD09GQ) Band 1 (620-670 nm) which are now routinely available at 250 m spatial resolution and corrected for atmospheric effect. This study shows this product to be useful to estimate turbidity in Tampa Bay, Florida, after rainfall events (R2 = 0.76, n = 34). Within Tampa Bay, Hillsborough Bay (HB) and Old Tampa Bay (OTB) presented higher turbidity compared to Middle Tampa Bay (MTB) and Lower Tampa Bay (LTB). [ABSTRACT FROM AUTHOR]

There is a well-documented association between ambient fine particulate matter air pollution (PM2.5) and cardiovascular disease (CVD) morbidity and mortality. Exposure to PM2.5 can cause premature death and harmful and chronic health effects such as heart attack, diabetes, and stroke. The Environmental Protection Agency sets annual PM2.5 standards to reduce these negative health effects. Currently above an annual average level of 12.0 µg/m is considered unhealthy. Methods. We examined the association of long-term exposure to PM2.5 and CVD in a cohort of 44,610 individuals who resided in 12 states recruited into the Southern Community Cohort Study (SCCS). The SCCS was designed to recruit Black and White participants who received care from Federally Qualified Health Centers; hence, they represent vulnerable individuals from low-income families across this vast region. This study tests whether SCCS participants who lived in locations exposed to elevated ambient levels of PM2.5 concentrations were more likely to report a history of CVD at enrollment (2002–2009). Remotely sensed satellite data integrated with ground monitoring data provide an assessment of the average annual PM2.5 in urban and rural locations where the SCCS participants resided. We used multilevel logistic regression to estimate the associations between self-reported CVD and exposure to elevated ambient levels of PM2.5. Results. We found a 13.4 percent increase in the odds of reported CVD with exposure to unhealthy levels of PM2.5 exposure at enrollment. The SCCS participants with medical histories of hypertension, hypercholesterolemia, and smoking had, overall, 385 percent higher odds of reported CVD than those without these clinical risk factors. Additionally, Black participants were more likely to live in locations with higher ambient PM2.5 concentrations and report high levels of clinical risk factors, thus, they may be at a greater future risk of CVD. Conclusions: In the SCCS participants, we found a strong relation between exposures to high ambient levels of PM2.5 and self-reported CVD at enrollment. [ABSTRACT FROM AUTHOR]

We examined windblown dust within the Imperial Valley (CA) during strong springtime west-southwesterly (WSW) wind events. Analysis of routine agency meteorological and ambient particulate matter (PM) measurements identified 165 high WSW wind events between March and June 2013 to 2019. The PM concentrations over these days are higher at northern valley monitoring sites, with daily PM mass concentration of particles less than 10 micrometers aerodynamic diameter (PM10) at these sites commonly greater than 100 μg/m3 and reaching around 400 μg/m3, and daily PM mass concentration of particles less than 2.5 micrometers aerodynamic diameter (PM2.5) commonly greater than 20 μg/m3 and reaching around 60 μg/m3. A detailed analysis utilizing 1 km resolution multi-angle implementation of atmospheric correction (MAIAC) aerosol optical depth (AOD), Identifying Violations Affecting Neighborhoods (IVAN) low-cost PM2.5 measurements and 500 m resolution sediment supply fields alongside routine ground PM observations identified an area of high AOD/PM during WSW events spanning the northwestern valley encompassing the Brawley/Westmorland through the Niland area. This area shows up most clearly once the average PM10 at northern valley routine sites during WSW events exceeds 100 μg/m3. The area is consistent with high soil sediment supply in the northwestern valley and upwind desert, suggesting local sources are primarily responsible. On the basis of this study, MAIAC AOD appears able to identify localized high PM areas during windblown dust events provided the PM levels are high enough. The use of the IVAN data in this study illustrates how a citizen science effort to collect more spatially refined air quality concentration data can help pinpoint episodic pollution patterns and possible sources important for PM exposure and adverse health effects. [ABSTRACT FROM AUTHOR]

(1) Background: Cardio-metabolic diseases (CMD), including cardiovascular disease, stroke, and diabetes, have numerous common individual and environmental risk factors. Yet, few studies to date have considered how these multiple risk factors together affect CMD disparities between Blacks and Whites. (2) Methods: We linked daily fine particulate matter (PM 2.5 ) measures with survey responses of participants in the Southern Community Cohort Study (SCCS). Generalized linear mixed modeling (GLMM) was used to estimate the relationship between CMD risk and social-demographic characteristics, behavioral and personal risk factors, and exposure levels of PM 2.5 . (3) Results: The study resulted in four key findings: (1) PM 2.5 concentration level was significantly associated with reported CMD, with risk rising by 2.6% for each µg/m 3 increase in PM 2.5 ; (2) race did not predict CMD risk when clinical, lifestyle, and environmental risk factors were accounted for; (3) a significant variation of CMD risk was found among participants across states; and (4) multiple personal, clinical, and social-demographic and environmental risk factors played a role in predicting CMD occurrence. (4) Conclusions: Disparities in CMD risk among low social status populations reflect the complex interactions of exposures and cumulative risks for CMD contributed by different personal and environmental factors from natural, built, and social environments., Competing Interests: The authors declare no conflict of interest.

A public participatory geographical information systems (PPGIS) demographic, environmental, socioeconomic, health status portal was developed for the Stambaugh-Elwood (SE) community in Columbus, OH. We hypothesized that soil at SE residences would have metal concentrations above natural background levels. Three aims were developed that allowed testing of this hypothesis. Aim 1 focused on establishing partnerships between academia, state agencies and communities to assist in the development of a community voice. Aim 2 was to design and conduct soil sampling for residents of the SE community. Aim 3 was to utilize our interactive, customized portal as a risk communication tool by allowing residents to educate themselves as to the potential risks from industrial sources in close proximity to their community. Multiple comparisons of means were used to determine differences in soil element concentration by sampling location at p < 0.05. The results demonstrated that eight metals (As, Cd, Cu, Pb, Mo, Se, Tl, Zn) occurred at statistically-significantly greater levels than natural background levels, but most were below risk-based residential soil screening levels. Results were conveyed to residents via an educational, risk-communication informational card. This study demonstrates that community-led coalitions in collaboration with academic teams and state agencies can effectively address environmental concerns.