Search

The optimal combination of the nitrogen fertilizer application and planting density with reference to the silage maize yield and quality remains unclear. We hypothesized that increasing both would increase yields following the law of diminishing returns. Yayu26, a silage maize cultivar, was used in a split-plot experiment to investigate the effects of nitrogen fertilizer and planting density on growth, nutrient characteristics, and chlorophyll fluorescence. The main plots were assigned to three planting densities: 60,000 (A1), 75,000 (A2), and 90,000 (A3) plants hm−2, and the subplots were assigned to four nitrogen fertilizer rates: 0 (B1), 120 (B2), 240 (B3), and 360 (B4) kg hm−2. The results showed that increasing the nitrogen application rate and planting density both enhanced silage maize yield. Nitrogen accumulation and agronomic use efficiency peaked at a planting density of 75,000 hm−2. Structural equation modeling showed that the nitrogen application rate and planting density affected nitrogen accumulation and nutrient properties by influencing chlorophyll fluorescence parameters and nitrogen agronomic efficiency, ultimately resulting in a positive effect on the yield. The A3 × B2 treatments exhibited higher nitrogen accumulation, potentially compensating for any deficiencies in the dry-matter yield. Therefore, the A3 × B2 treatment was evaluated as the optimal treatment to achieve sustainable and economically feasible silage maize production. [ABSTRACT FROM AUTHOR]

Increasing crop yield is a significant objective in modern agriculture, with adjusted planting density and rational fertilization strategies standing out as the foremost approaches for attaining such a goal. Through the use of modern artificial intelligence techniques such as genetic algorithms and neural networks, the CPDOS (Crop Planting Density Optimization System), an online intelligent system that can automate the modeling, optimization, and analysis of the two models, was developed in the present study. The goal of the system is to optimize the planting density model and fertilizer application in combination with other computer system development techniques. The CPDOS comprises three main modules: yield density optimization module, optimal planting density range module, and fertilization and planting density optimization module. The three modules are complemented by two modules for data input and result visualization, culminating in the comprehensive process of optimizing planting density and fertilizer allocation through the CPDOS. The CPDOS was tested using potato, corn, and soybean data, and the results show that the optimization effects of planting density and fertilizer application were satisfactory. The CPDOS is an automated crop planting optimization system that integrates algorithms and models and is driven by artificial intelligence technology. The introduction of the CPDOS reduces the barriers to utilizing these algorithms and models, facilitating wider adoption of intelligently optimized planting technology. The platform's launch will accelerate the swift advancement of this field. [ABSTRACT FROM AUTHOR]

The heavy use of mineral fertilizers causes imbalances in the biological processes that take place in soil. Therefore, it is necessary to develop more effective fertilizers or fertilizer complexes that ensure agricultural productivity and soil conservation. There is currently a lack of knowledge regarding the effectiveness of biologically enriched, complex mineral fertilizers for spring barley fertilization. The hypothesis of this study was that bacteria-enriched (Paenibacillus azotofixans, Bacillus megaterium, Bacillus mucilaginosus, and Bacillus mycoides), complex mineral fertilizers (N5P20.5K36) have significant impacts on the yield and potential for economic use of spring barley. Experimental studies were carried out for three years (2020–2022) with sandy loam soil in southern Lithuania. Four different spring barley fertilization scenarios (SCs) were investigated. In SC-1 (control), complex mineral fertilizer (N5P20.5K36) was not applied. In the other SCs, spring barley was sown with a drill and fertilizers were incorporated locally during the sowing operation: fertilization scenario SC-2 used 300 kg ha−1, SC-3 used 150 kg ha−1 preceded by a bacteria-inoculated complex mineral fertilizer (N5P20.5K36), and SC-4 used 300 kg ha−1 with the same bacterial complex. The results showed that the bacterial inoculant increased the efficiency of the mineral fertilizer and had an effect on plant growth in barley. For three consecutive years in the same plots, the bacterial inoculant showed significant positive effects on grain yield (changes of 8.1% in 2020, 6.8% in 2021, and 17.3% in 2022 between SC-2 and SC-4). Comparing the several different fertilizer scenarios from an economic point of view, it was observed that the highest profit per hectare was obtained with SC-4 in all three years of the study. Comparing SC-4 and SC-2, an increase of 13.7% was observed in 2020, followed by 9.1% and 41.9% in 2021 and in 2022, respectively. This study will be useful for farmers, biological inoculant manufacturers, and scientists researching the effectiveness of biological inoculants for growing agricultural crops. We found that it is possible to increase the yield of barley (7–17%) using the same rate of mineral fertilization by enriching it with bacterial inoculants. Further studies should be conducted to determine the effects of the bacterial inoculant on crop yield and soil over a period longer than 3 years. [ABSTRACT FROM AUTHOR]

Land reclamation may expand the supply of usable land for food security. Soil microorganisms have been considered as an amendment in immature soil to improve its quality. However, different microbial fertilizers' effects on plant growth in immature soil have largely been unexplored. In order to evaluate the effects of different microbial fertilizers on immature soil, the soil quality and microbial community structure of corn rhizosphere soil samples under different microbial fertilizers were investigated. The results revealed a significant difference between microbial fertilizers (especially seaweed microbial fertilizer, SMF) and commercial chemical compound fertilizers in the soil properties and microbial community structure. Indeed, SMF caused a 486.21%, 23.17%, 21.08%, 38.33%, and 482.39% increase in Flavobacteriaceae, Planctomycetaceae, Chitinophagaceae, Acidobacteria_Gp3, and Mortierellaceae but a 23.82%, 18.66%, 42.36%, 29.12%, 81.97%, 42.19%, and 99.33% reduction in Cytophagales, Comamonadaceae, Rhodospirillaceae, Sinobacteaceae, Aspergillaceae, Myrmecridiaceae, and Typhulaceae, respectively; while CCF caused an 85.68% and 183.22% increase in Xanthomonadaceae and Mortierellaceae but a 31.29%, 36.02%, and 65.74% reduction in Cytophagales, Spartobacteria, and Cyphellophoraceae compared with the control based on 16S and ITS amplicon sequencing of soil microflora. Furthermore, redundancy discriminant analysis of the microbial communities and soil properties indicated that the main variables of the bacterial and fungal communities included exchangeable Ca, organic matter content, total N, and available P. Overall, the results of this study revealed significant changes under different fertilizer conditions in the microbiota and chemical properties of corn soil. Microbial fertilizers, particularly SMF and SM, can be used as a good amendment for newly reclaimed land. [ABSTRACT FROM AUTHOR]

Oilseeds yield response to sulphur (S) has been well investigated but the dynamics of total biomass accumulation (TBA) and partitioning by sesame plants in response to S are not well understood. This study was initiated to investigate the effects of S on sesame, in which four sesame varieties V1, SG-27; V2, SG-30; V3, SG-36; V4, SG-51 and four S treatments T1, 20; T2, 30; T3, 40; T4, 50 kg ha-1 were used. Results revealed that the leaf area index and photosynthetic rate of sesame varieties were significantly higher under T3 with V3 . Similarly, S fertilization considerably increased the TBA and maximum TBA was reached at late-flowering with V3 in T3. Relative to T1, plants in T3 had 33 and 23% higher capsule and seed biomass, respectively. Furthermore, total S accumulation and distribution in different plant organs changed with growth stage, at pre-flowering and mid-flowering stage maximum S was found in the stem, whereas at late-flowering and full-maturity stage highest S was recorded in reproductive parts. These results implied that S fertilizers should be applied to agricultural fields to improve oilseed production and by selecting the appropriate and area-specific genotype we can increase sesame seed yield under rainfed conditions. [ABSTRACT FROM AUTHOR]

The hypothesis that application of starter nitrogen (N) fertilizer to cowpea may increase grain and fodder yields and profitability was tested in the Guinea and Sudan savanna zones of northern Ghana. Two cowpea varieties (Apagbaala: grain-type and Padi-Tuya: dual purpose) and three N fertilizer rates (0-30-30, 15-30-30 and 30-30-30 N-P2O5-K2O kg/ha) were evaluated using a 2 x 3 factorial treatments arrangement in a randomized complete block design with three replicates. Grain and fodder yields, 100 seed weight (SW) and net return of Padi-Tuya increased significantly compared with Apagbaala in both zones. Application of starter N fertilizer increased grain yield, fodder yield, N use efficiency (NUE) and net return by more than 30% compared with the control in both zones. Padi-Tuya cowpea with 15 kg/ha N fertilizer was risk efficient at all risk aversion levels when only grain was considered, but Padi-Tuya with 30 kg/ha N fertilizer becomes the most risk efficient option when the value of fodder was included. The results suggest that small-scale farmers could apply starter N fertilizer at either 15 kg/ha N for grain only or 30 kg/ha N for both grain and fodder yields improvement of cowpea in West Africa and similar ecologies. [ABSTRACT FROM AUTHOR]

In this context, Shafi et al. [[22]] reported that the incorporation of humic acid in combination with chemical P fertilizer can prevent the P fixation in calcareous soil, thus improving crop yield and wheat ( I Triticum aestivum i L.) plants' P uptake. It contains 11 articles reporting (1) the effects of new fertilization strategies on soils and plants, (2) characteristics of innovative organic amendments and (3) system innovations based on organic fertilization and waste recycling. Smart Fertilizer Development and Their Effect on Soils and Plants As the main limiting factor for food production is N and P availability, huge amounts of conventional N and P-fertilizer are applied per year, which often lead to environmental damage [[16]]. [Extracted from the article]