Search

Nowadays, almost 30% of total energy consumption (130 EJ) is consumed for the operation of buildings, mainly by space heating/cooling and ventilation systems, hot water preparation systems, lighting, and other domestic appliances. To improve the energy efficiency of buildings, several countries are promoting the use of renewable energy. The most promising systems include active and passive solar installations. In passive systems, the solar energy is collected, stored, reflected, or distributed by the roof ponds, natural convective loops, and the most popular direct gain walls and thermal storage walls (known as Trombe walls). This paper reviews the experimental and numerical studies devoted to the different solutions of Trombe walls, including solar chimneys integrated on the vertical walls, classic Trombe walls, Trombe walls with incorporated phase change materials, and photovoltaic Trombe walls. The actual state of the art is presented in the context of reducing energy consumption and enhancing thermal comfort. Most of the analyzed studies showed that the application of thermal storage walls allowed achieving these goals, led to lower emissions of greenhouse gases, and improved living standards. Nevertheless, there is a need for more detailed feasibility studies, including cost and environmental indicators. [ABSTRACT FROM AUTHOR]

Passive solutions in buildings have recently been rediscovered because they allow the rational use of solar radiation, which promotes energy savings. Thermal energy gained from the sun may be stored in the form of sensible heat in accumulative solid materials in a building envelope. This paper proposes an innovative solar air heater that captures and accumulates solar energy during the day and releases it during the night. The analyzed system is based on inexpensive ceramic modules, which can be used to construct thermal storage walls or solar chimneys in modern buildings. Both configurations have been tested experimentally and by a numerical model in ArCADia BIM software. Experiments have been carried out in laboratory conditions using a specially developed prototype. Among other parameters, power transferred from the solar air heater to the ventilation air in different conditions has been analyzed. When airflow was set to 150 m3/h, the maximum power observed under stable working conditions was approx. 355.0 W when the developed solar air heater operated as the solar chimney, and approx. 165.0 W when it operated as the solar thermal wall. When airflow was set to 200 m3/h, the maximum power was approx. 385.0 W. Experimental results have been used to calculate the efficiency of the solar air heater in real conditions. The total efficiency in the case of the solar chimney was estimated as 0.25, while in the case of the thermal wall it was estimated as 0.78, which resulted in an annual reduction in energy usage at a level of 190.7 kWh and 556.1 kWh, respectively (4.8 and 14.0%). In practice, these values can be significantly higher due to the possibility of increasing the length and shape of the accumulation heat exchanger. [ABSTRACT FROM AUTHOR]