Search

Electric vehicles (EVs) play a crucial role in tertiary sectors due to their eco-friendliness and sustainability when powered by clean energy. Integrating EV charging stations with renewable energy systems is essential to alleviate energy issues and grid pressure. Exploring this integration's feasibility is imperative for sustainable transportation. This study aims to provide a clear approach and methodology for examining the potential of integrating renewable energy technologies with EV charging stations at the district level. Additionally, the study investigates the energy, economic, and environmental benefits of an integrated system comprising photovoltaic/wind turbines (PV/WTs) connected to the electricity grid to meet the energy demand of a tertiary district consisting of five hotels in Egypt. Through the development of a simulation model, the paper verifies whether the proposed energy system can meet the district's energy demand. In addition, the simulation model has been employed to conduct a sensitivity analysis for investigating the impact of different charging rates on economic feasibility. The results indicate that a hybrid renewable energy system (HRES) integrated with an EV charging station can effectively relieve pressure on the electricity grid and provide electricity at competitive prices compared to the national grid. Moreover, the proposed energy system significantly reduces environmental emissions by up to 510 tons of CO2 per year and has the potential to decrease fossil fuel usage by 248 tons per year. Sensitivity analysis highlights the significant impact of charging prices on project profitability. [ABSTRACT FROM AUTHOR]

Solar power occupies a significant position among global renewable energy sources due to its abundant energy potential. Consequently, its contribution to electricity generation is steadily increasing. However, obtaining peak efficiency from fixed solar photovoltaic (PV) panels is a formidable task due to their limited ability to consistently tap into solar energy. To tackle this issue and mitigate energy efficiency losses, the utilization of solar tracking systems has emerged as an exceptionally effective solution. These systems enable continuous adjustment of the panels' position to align with the sun's trajectory, optimizing energy absorption and enhancing overall performance. This paper presents the performance and cost analysis of three distinct solar panel tracking systems, namely, a fixed system, a single-axis system, and a dual-axis system. The systems are operated under identical coordinates and conditions. The production data are collected over a period of 15 days for comparative analysis. The tracking movements of the systems are controlled using Arduino. The mechanical components are specifically designed for the establishment of each system. The findings of this study indicate that both single-axis and dual-axis solar tracking systems outperformed fixed systems in terms of power generation. The single-axis system demonstrated a 24.367% increase in power production, while the dual-axis system showed a 32.247% increase compared to the fixed system. Moreover, a cost analysis was carried out considering the installation expenses and power production data of the three systems. It was determined that the single-axis tracking system achieved payback in 0.39 years less compared to the fixed system, while the dual-axis system achieved payback in 1.48 years less compared to the fixed system. Overall, this study underscores the advantages of implementing solar tracking systems, particularly in the single-axis and dual-axis configurations, as they contribute to higher power generation and cost-effectiveness compared to fixed systems. [ABSTRACT FROM AUTHOR]

A bottom-up cost analysis for delivering utility-scale PV-generated electricity as hydrogen through pipelines and as electricity through power is undertaken. Techno-economic, generation, and demand data for California are used to calculate the levelized cost of transmitting (LCOT) energy and the levelized cost of electricity (LCOE) prior to distribution. High-voltage levels of 230 kV and 500 kV and 24-inch and 36-inch pipelines for 100 to 700 miles of transmission are considered. At 100 miles of transmission, the cost of transmission between each medium is comparable. At longer distances, the pipeline scenarios become increasingly cheaper at low utilization levels. The all-electric pathways utilizing battery energy storage systems can meet 95% of the load for as low as 356 USD/MWh, whereas when meeting 100% of load with the hydrogen gas turbine and fuel cell pathways, the costs are 278 and 322 USD/MWh, respectively. [ABSTRACT FROM AUTHOR]

In standalone microgrids, the Battery Energy Storage System (BESS) is a popular energy storage technology. Because of renewable energy generation sources such as PV and Wind Turbine (WT), the output power of a microgrid varies greatly, which can reduce the BESS lifetime. Because the BESS has a limited lifespan and is the most expensive component in a microgrid, frequent replacement significantly increases a project's operating costs. This paper proposes a capacity optimization method as well as a cost analysis that takes the BESS lifetime into account. The weighted Wh throughput method is used in this paper to estimate the BESS lifetime. Furthermore, the well-known Particle Swarm Optimization (PSO) algorithm is employed to maximize battery capacity while minimizing the total net present value. According to simulation results, the optimal adjusting factor of 1.761 yields the lowest total net present value of US$200,653. The optimal capacity of the BESS can significantly reduce the net present value of total operation costs throughout the project by extending its lifetime. When applied to larger power systems, the proposed strategy can further reduce total costs. [ABSTRACT FROM AUTHOR]

With the rapid growth in industrial development, there is a particular need for new environmentally balanced energy source utilization. Ethanol produced from biomass, especially lignocellulosic waste products, represents an attractive, sustainable energy source for fuel production. Until now, in Poland, bioethanol has been produced from edible plants containing sugars susceptible to fermentation. Due to the growing technical and economical needs for alternative biomass source utilization, in the present work, an attempt has been made to identify the most cost-effective strategy to analyze ethyl alcohol production from different lignocellulose sources. The concept of an installation for the first and second stages of bioethanol production was proposed. All of the most relevant elements of the bioethanol production cost analysis were identified and characterized. Cost analyses of all important production process elements showed their relative effects on the production cost and potential for the competitive advantage of applied raw material. The study demonstrates the importance of renewable energy source utilization and the cost-effectiveness of bioethanol production. Furthermore, the proposed less energy- and labor-demanding process, primarily achieved via the implementation of technological medium recovery and recirculation, reduces the production cost and results in higher production efficiency, and therefore has a significant effect on the overall process economy. [ABSTRACT FROM AUTHOR]

Using renewable energy sources instead of fossil fuels is one of the best solutions to overcome greenhouse gas (GHG) emissions. However, in designing clean power generation microgrids, the economic aspects of using renewable energy technologies should be considered. Furthermore, due to the unpredictable nature of renewable energy sources, the reliability of renewable energy microgrids should also be evaluated. Optimized hybrid microgrids based on wind and solar energy can provide cost-effective power generation systems with high reliability. These microgrids can meet the power demands of the consuming units, especially in remote areas. Various techniques have been used to optimize the size of power generation systems based on renewable energy to improve efficiency, maintain reliability, improve the power grid's resilience, and reduce system costs. Each of these techniques has shown its advantages and disadvantages in optimizing the size of hybrid renewable energy systems. To increase the share of renewable energies in electricity supply in the future and develop these new technologies further, this paper reviews the latest and most efficient techniques used to optimize green microgrids from an economical and reliable perspective to achieve a clean, economical, and highly reliable microgrid. [ABSTRACT FROM AUTHOR]

The pollution caused by gas flaring is hazardous to the health of flora, fauna, and humans settled around the flaring site. Gas flaring also incurs economic loss as natural gas, an energy source, is wasted in flares. Furthermore, the unreliable electrical infrastructure is a roadblock for oil and gas companies attempting to achieve their production targets. This paper presents a framework to design hybrid energy systems (HES) which utilize the gas flare waste along with the locally available renewable energy sources to generate electricity. A novel dispatch strategy to suit the requirements of the oil and gas fields has been used for real-time simulations and optimization of the HES. As a test case, six different hybrid energy configurations, modelled for two gas flaring sites, Lakwa and Geleky in Assam—India, were analyzed and compared on the basis of economic and environmental factors. The best suitable configuration comprised 2000 kW solar photovoltaic (PV) panel sets, one 200 kW gas microturbine, two 30 kW gas microturbines, and grid connection. The proposed system economically outperformed the existing power system in the area by 35.52% in terms of the net present cost. Moreover, it could save 850 tons of carbon dioxide emissions annually, and it has a renewable fraction of 93.7% in the total energy generation. Owing to these merits, the presented technique would be a promising option for generation of electricity from flare gas waste and to mitigate pollution. [ABSTRACT FROM AUTHOR]

In this paper, a design technique for constructing a renewable-energy-based power system based on a customer's power load is proposed. The proposed design technique adopts a second renewable energy power source in charge of the base load and is an improved method of the referenced studies with one type of renewable energy power source. In this proposed method, fuel cells are adopted as the base power source, and PV (photovoltaic) power generation and an ESS (energy storage system) are adopted as the power generation sources that supply the middle-load and peak-load power. When the fuel cell is applied as a base power source through the method designed in this study, a cost reduction of approximately 30.03% is expected, compared to a system that does not use a base power source. In addition, the criteria for securing a system's power supply stability and the economics when fuel cells are adopted are analyzed in terms of the system's installation cost. [ABSTRACT FROM AUTHOR]

A transition to renewable energy sources and a circular economy has increased interest in renewable resources not usually considered as energy sources or plant nutrient resources. Horse manure exemplifies this, as it is sometimes recycled but not often used for energy purposes. The purpose of this study was to explore horse manure management in a Swedish municipality and prospects for energy recovery. The case study includes a survey of horse manure practices, environmental assessment of horse manure treatment in a biogas plant, including associated transport, compared to on-site unmanaged composting, and finally a simplified economic analysis. It was found that horse manure management was characterized by indoor collection of manure most of the year and storage on concrete slabs or in containers, followed by direct application on arable land. Softwood was predominantly used as bedding, and bedding accounted for a relatively small proportion (13%) of the total mix. Anaerobic digestion was indicated to reduce potential environmental impact in comparison to unmanaged composting, mainly due to biogas substituting use of fossil fuels. The relative environmental impact from transport of manure from horse facilities to anaerobic digestion plant was small. Results also indicate a relatively high cost for horse keepers to change from composting on site to anaerobic digestion in a centralized plant. [ABSTRACT FROM AUTHOR]

Accounting for nearly 40% of final energy consumption, buildings are central to European energy policy. The Directive on Energy Performance of Buildings establishes a benchmarking system known as cost-optimality to set minimum energy performance requirements in new and existing buildings. This paper applies the cost-optimal methodology to an existing structure located in the Mediterranean area (Southern Italy). The building is composed of two units that have been considered for different uses: hotel and multi-residential. Several energy efficiency and renewable measures have been implemented both individually and as part of packages of measures. The cost-optimal solution has been identified as able to optimize energy consumption and costs from financial and macroeconomic perspectives. The first reference building (hotel use) shows a maximum reduction of primary energy and CO2 emission of about 42%, falling within the CasaClima energy class D, while the second reference building (residential use) achieves a value of 88% for primary energy and 85% for CO2 emissions, falling into class B. Thermal dispersions through the envelope can be limited using a suitable combination of insulating materials while a variety of technical variants are selected, such as VRF (variant refrigerant flow) systems, heat pumps with fan coils associated with controlled mechanical ventilation, solar thermal and photovoltaic. This paper illustrates the development of energy retrofit projects, in order to reach a balance between efficiency measures and costs for a building having two different uses, providing guidance to similar case studies related to a warm climate. [ABSTRACT FROM AUTHOR]

Two cable logging systems were reviewed to compare the efficiency of potential biomass extraction from remote forest sites in Ireland based on productive machine hour (PMH) and unit cost of operation (€/m3). Three operational scenarios (SC) were analysed where SC I was a three man crew operation (choker setter, the carriage operator and unhooking chokers). SC II was a variation of this with a two man crew operation. SC III was operating radio controlled chokers there was a two man crew (choker setter and carriage operator). The study aims to assess how operations in Ireland perform against previous known cable studies to determine whether the cost of timber extraction on remote forest sites inaccessible for mechanised felling, has a future given the increased demand for wood fibre in Ireland, both from the saw milling industries and the wood for energy sector. The volume per PMH was recorded at 17.97 for SC I, 15.09 for SC II and 20.58 m3 for SC III. The difference in productivity versus SC III remote controlled chokers is 5.49 m3/PMH for SC II crew and 2.61 m3/PMH for SC I. The decrease in total volume extracted from SCs I and II versus SC III was recorded at 15.69 m3 (15%) and 32.97 m3 (36%) product respectively. In value terms, the unit cost (€/m3) varied from 6.29 (SC I) to 6.43 (SC II) to 4.57 (SC III). When looking at the production unit costs of normal wood energy supply chains in Ireland, the figures are similar ranging from 3.17 €/m3 to 8.01 €/m3. The value of the end product of course will always determine which market the eventually goes to but given that cable log wood fibre has been unthinned and unmaintained then the biomass sector may be an ever increasing demand point in the search for increased woody biomass given that the unit costs can be competitive with other wood energy supply chains. [ABSTRACT FROM AUTHOR]

The Republic of Djibouti has untapped potential in terms of renewable energy resources, such as geothermal, wind, and solar energy. This study examines the economic feasibility of green hydrogen production by water electrolysis using wind and geothermal energy resources in the Asal–Ghoubbet Rift (AG Rift), Republic of Djibouti. It is the first study in Africa that compares the cost per kg of green hydrogen produced by wind and geothermal energy from a single site. The unit cost of electricity produced by the wind turbine (0.042 $/kWh) is more competitive than that of a dry steam geothermal plant (0.086 $/kWh). The cost of producing hydrogen with a suitable electrolyzer powered by wind energy ranges from $0.672/kg H2 to $1.063/kg H2, while that produced by the high-temperature electrolyzer (HTE) powered by geothermal energy ranges from $3.31/kg H2 to $4.78/kg H2. Thus, the AG Rift area can produce electricity and green hydrogen at low-cost using wind energy compared to geothermal energy. The amount of carbon dioxide (CO2) emissions reduced by using a "Yinhe GX113-2.5MW" wind turbine and a single flash geothermal power plant instead of fuel-oil generators is 2061.6 tons CO2/MW/year and 2184.8 tons CO2/MW/year, respectively. [ABSTRACT FROM AUTHOR]

Photovoltaic electricity generation is key to achieving deep decarbonization with a high degree of electrification. It is predicted that the energy sector will reduce carbon dioxide by producing electricity mainly from photovoltaic (PV) power. Although dynamic development of the implementation of photovoltaic panels has been observed, their choice considering customer specificity is still a problem. Therefore, the purpose of this study is to propose the model of choice photovoltaic panels considering customers' expectations. It can support the choice of a photovoltaic panel of a certain quality (satisfaction of concrete customer) in combination with the cost of its purchase. The proposed model includes acquiring and then processing customers' expectations into technical criteria, while simultaneously considering the weighting of these criteria. It is realized in a standardized way, i.e., the zero-unitarization method (MUZ), after which normalized values of the quality of the photovoltaic panels' criteria are obtained. In turn, the quality of these products is estimated by the weighted sum model (WSM) and then integrated with purchase cost in qualitative cost analysis (AKJ). As a result, using the scale of relative states, it is possible to categorize customer satisfaction from indicating qualitative cost and selecting the photovoltaic panel expected by customers (the most satisfactory). The effectiveness of the model was demonstrated by a sensitivity analysis, after which the key PV criteria were indicated. The proposed model is intended for any entity who selects a photovoltaic panel for customers. The computerization of calculations may contribute to its utilitarian dissemination. [ABSTRACT FROM AUTHOR]

The abandonment of conventional sources in favor of energy from renewable energy sources (RES) has a global dimension, and the dynamic increase in the share of energy from photovoltaic systems in the energy mix of many countries results from the possibility of obtaining it both on a small scale (micro-installations) and as part of economic investments (photovoltaic power plants). The study aimed to assess the economic efficiency of 22 photovoltaic farms located in northeastern Poland. The research covered 5 solar power plants with a capacity of up to 799 kWp (I), 13 between 800 and 1100 kWp (II), and 4 installations of 1.98 MWp (III). The evaluation was based on net present value (NPV), internal rate of return (IRR), payback period (PP), profitability index (PI), accounting rate of return (ARR). Additionally, a sensitivity analysis was carried out regarding the value of economic indicators. The analysis shows that all studied PV farms are economically justified investments (NPV > 0) regardless of the adopted scenario. Solar power plants of the largest analyzed capacity (group III) resulted in being the most profitable ones, but no linear relationship between the level of productivity and profitability was established. Due to the large variation in terrain shape in northeastern Poland, landscape value and social benefits, which are difficult to assess, the support system for investments regarding the construction of photovoltaic power plants proved to be the most effective in group I. [ABSTRACT FROM AUTHOR]

Hybrid renewable energy systems are a promising technology for clean and sustainable development. In this paper, an intelligent algorithm, based on a genetic algorithm (GA), was developed and used to optimize the energy management and design of wind/PV/tidal/ storage battery model for a stand-alone hybrid system located in Brittany, France. This proposed optimization focuses on the economic analysis to reduce the total cost of hybrid system model. It suggests supplying the load demand under different climate condition during a 25-years interval, for different possible cases and solutions respecting many constraints. The proposed GA-based optimization approach achieved results clear highlight its practicality and applicability to any hybrid power system model, including optimal energy management, cost constraint, and high reliability. [ABSTRACT FROM AUTHOR]