Search

Covering the full texts of all papers published in MDPI's Remote Sensing between 2009 and 2021, in-depth scientometric analyses were conducted. Trends in publications show an increase in the overall number of papers. A relative increase in papers using SAR sensors and a relative decrease in papers using optical remote sensing can also be seen. The full-text analyses reveal distinctive styles and writing patterns for papers from different sub-fields of remote sensing and for different countries and even cities. While a slight increase in the readability of abstracts is detected over time, the overall readability of papers is decreasing. Institutional co-authorship analysis reveals the ongoing 'scientific decoupling' between China and the USA in remote sensing. Using scientometric full-text analysis, current trends and developments are revealed. [ABSTRACT FROM AUTHOR]

Most Penman-Monteith-Leuning (PML) evapotranspiration (ET) modeling studies are dominated by consideration of meteorological, energy, and land use information, etc., but the dynamic coupling of soil moisture content (SM), especially in terms of improving accuracy through assimilation, lacks sufficient attention. This paper proposes a research framework for the dynamic coupling simulation of PML model and SM based on data assimilation, i.e., the remote sensing monitored SM is combined with soil evaporation of PML to obtain high-precision time-continuous SM data through data assimilation; simultaneously, dynamical soil evaporation coefficients are generated based on the assimilated SM to improve the simulation accuracy of the PML model. The new scheme was validated at a typical irrigation zone in north China and showed obvious improvements in both SM and ET simulations. Moreover, the effect of the assimilation of SM on the simulation accuracy of ET for different crop growth periods is further analyzed. This research provides a new idea for the coupling simulation of the SM and PML models. [ABSTRACT FROM AUTHOR]

Vegetation indices provide information for various precision-agriculture practices, by providing quantitative data about crop growth and health. To provide a concise and up-to-date review of vegetation indices in precision agriculture, this study focused on the major vegetation indices with the criterion of their frequency in scientific papers indexed in the Web of Science Core Collection (WoSCC) since 2000. Based on the scientific papers with the topic of "precision agriculture" combined with "vegetation index", this study found that the United States and China are global leaders in total precision-agriculture research and the application of vegetation indices, while the analysis adjusted for the country area showed much more homogenous global development of vegetation indices in precision agriculture. Among these studies, vegetation indices based on the multispectral sensor are much more frequently adopted in scientific studies than their low-cost alternatives based on the RGB sensor. The normalized difference vegetation index (NDVI) was determined as the dominant vegetation index, with a total of 2200 studies since the year 2000. With the existence of vegetation indices that improved the shortcomings of NDVI, such as enhanced vegetation index (EVI) and soil-adjusted vegetation index (SAVI), this study recognized their potential for enabling superior results to those of NDVI in future studies. [ABSTRACT FROM AUTHOR]

The point cloud segmentation method plays an important role in practical applications, such as remote sensing, mobile robots, and 3D modeling. However, there are still some limitations to the current point cloud data segmentation method when applied to large-scale scenes. Therefore, this paper proposes an adaptive clustering segmentation method. In this method, the threshold for clustering points within the point cloud is calculated using the characteristic parameters of adjacent points. After completing the preliminary segmentation of the point cloud, the segmentation results are further refined according to the standard deviation of the cluster points. Then, the cluster points whose number does not meet the conditions are further segmented, and, finally, scene point cloud data segmentation is realized. To test the superiority of this method, this study was based on point cloud data from a park in Guilin, Guangxi, China. The experimental results showed that this method is more practical and efficient than other methods, and it can effectively segment all ground objects and ground point cloud data in a scene. Compared with other segmentation methods that are easily affected by parameters, this method has strong robustness. In order to verify the universality of the method proposed in this paper, we test a public data set provided by ISPRS. The method achieves good segmentation results for multiple sample data, and it can distinguish noise points in a scene. [ABSTRACT FROM AUTHOR]

This review will serve as an entry point for international researchers who would like to tap into the vast scientific potential of Chinese-language literature on oceanic fronts. We focused on observational physical oceanography studies of marine fronts. A thorough bibliographic search netted 95 papers published in 1982–2023, with a sharp increase in the total number of papers from 2006–2010 to 2011–2015, when this number almost tripled. This trend continued unabated through the early 2020s. The sharp increase in Chinese-language publications preceded by several years a rapid increase in English-language publications in the same field. Regionally, the overwhelming majority of papers is focused on the China Seas, particularly the East China Seas and northern South China Sea. Elsewhere, a number of papers were dedicated to the Southern Ocean and North Atlantic. Thematically, papers on remote sensing of ocean fronts dominate the literature, with special attention to the development of front-detection algorithms that can be applied to satellite data on sea surface temperature, salinity, chlorophyll, and sea level anomaly. Numerous papers on marine fronts in the China Seas present important results that have to be considered by international researchers. Overall, this review emphasizes the significant contributions made by Chinese oceanographers, particularly to studies of the frontal oceanography of the China Seas. [ABSTRACT FROM AUTHOR]

Drylands are vast and face threats from climate change and human activities. Traditional reviews cannot capture interdisciplinary knowledge, but bibliometric analysis provides valuable insights. Our study conducted bibliometric research of scientific production on climate change and land degradation in drylands using remote sensing. We examined 1527 Scopus-indexed publications to identify geographic and thematic hotspots, extracting leading authors, journals, and institutions. China leads in publications, followed by the US, Germany, and Australia. The US has the highest citation count. Collaboration networks involve the US, China, and European countries. There has been an exponential increase in remote sensing of land degradation in drylands (RSLDD) publications since 2011. Key journals include "International Journal of Remote Sensing" and "Remote Sensing of Environment". The analysis highlights the growing interest in the field, driven by Australia, the US, and China. Key areas of study are vegetation dynamics and land use change. Future perspectives for this scientific field involve promoting collaboration and exploring emerging technologies for comprehensive land degradation and desertification research. [ABSTRACT FROM AUTHOR]

Spartina alterniflora (S. alterniflora) has grown rapidly in China since its introduction in 1979, showing the trend of alien species invasion, which has seriously affected the ecosystem balance of coastal wetlands. The temporal and spatial expansion law of S. alterniflora can be obtained through remote sensing monitoring, which can provide a reference and basis for S. alterniflora management. This paper presents a method for extracting and mapping S. alterniflora based on phenological characteristics. The coastal areas of the Yangtze River Delta Urban Agglomeration are selected as the research area, and the Landsat time series data from 1990 to 2022 on the Google Earth Engine (GEE) platform are used to support the experiment in this paper. Firstly, the possible growing area of S. alterniflora was extracted using the normalized differential moisture index (NDMI), normalized differential vegetation index (NDVI), and normalized differential water index (NDWI); Then, the time series curve characterizing the phenological characteristics of vegetation was constructed using the vegetation index to determine the difference phase of phenological characteristics between S. alterniflora and other vegetation. Finally, a decision tree was constructed based on the phenological feature difference phase data to extract S. alterniflora, and it is applied to the analysis of temporal and spatial changes of S. alterniflora in the study area from 1990 to 2022. The results show that the area of S. alterniflora increased from ~1426 ha in 1990 to ~44,508 ha in 2022. However, the area of S. alterniflora began to show negative growth in 2015 due to the construction of nature reserves and ecological management. The results of correlation analysis showed that the growth of C. japonicum was significantly affected by temperature stress and weakly affected by precipitation. This study verified that Landsat time series images can effectively extract vegetation phenological information, which has strong feasibility for extraction and dynamic monitoring of S. alterniflora and provides technical support for the management and monitoring of invasive plants in coastal wetlands. [ABSTRACT FROM AUTHOR]

Land desertification is a key environmental problem in China, especially in Northwest China, where it seriously affects the sustainable development of natural resources. In this paper, we combine high-resolution satellite remote sensing images and UAV (unmanned aerial vehicle) visible light images to extract desert vegetation data and quickly locate and accurately monitor land desertification in relevant areas according to changes in vegetation coverage. Due to the strong light and dry climate of deserts in Northwest China, which results in deeper vegetation shadow texture and mostly dry shrubs with fewer stems and leaves, the accuracy of the vegetation index commonly used in visible remote sensing image classification is not able to meet the requirements for monitoring and evaluating land desertification. For this reason, in this paper, we took the Hangjin Banner in Bayannur as an example and constructed a new vegetation index, the HSVGVI (hue–saturation–value green enhancement vegetation index), based on the HSV (hue–saturation–value) color space using channel enhancement that can improve the extraction accuracy of desert vegetation and reduce misclassification. In addition, in order to further test the extraction accuracy, samples of densely vegetated and multi-shaded areas were divided in the study area according to the accuracy-influencing factors. At the same time, the HSVGVI was compared with the vegetation indices EXG (excess green index), RGBVI (red–green–blue vegetation index), MGRVI (modified green–red vegetation index), NGBDI (normalized green–red discrepancy index), and VDVI (visible-band discrepancy vegetation index) constructed based on the RGB (red–green–blue) color space. The experimental results show that the extraction accuracy of the EXG and other vegetation indices constructed in RGB color space can only reach 70%, while the extraction accuracy of the HSVGVI can reach more than 95%. In summary, the HSVGVI proposed in this paper can better realize the extraction of desert vegetation data and can provide a reliable technical tool for monitoring and evaluating land desertification. [ABSTRACT FROM AUTHOR]

Lanzhou City is located in the semi-arid region of northwest China, which experiences serious desertification. Moreover, the high intensity of land development, with the accelerated industrialization and urbanization, causes increasingly aggravated conflict between humans and the environment. Exploring the response of the ecological environment quality to the natural environment and anthropogenic activities is important to protect the sustainable development of urban economic construction and the environment. Based on the Google Earth Engine (GEE) platform, this paper constructed a modified Remote Sensing Ecological Index (MRSEI) model which could reflect the ecological environment quality by integrating the desertification index (DI) into the Remote Sensing Ecological index (RSEI) model. This paper explores the spatiotemporal variation in the environmental quality from 2000 to 2020 in Lanzhou, China, and analyzes the natural and anthropogenic factors affecting the environment quality in terms of temperature, precipitation, gross domestic product (GDP), land use, night lighting, and population. The results showed that the mean value of MRSEI ranged from 0.254 to 0.400. The area undergoing fast growth in ecological quality was in the northwestern part of Lanzhou, and the area of decrease was in the central part. Various factors have different degrees of influence on the ecosystem, with temperature, precipitation, and land use having a greater impact, and GDP and population having a limited impact. Precipitation and temperature showed a strong impact when interacting with other factors, demonstrating that precipitation and temperature were also key factors affecting MRSEI. Overall, climate change and the implementation of ecological restoration projects have led to an improvement in the quality of the ecological environment in Lanzhou. This study provides a reference for understanding the spatiotemporal changes in the ecological environment in semi-arid Lanzhou and is conducive to formulating proper protection strategies. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

Thermodynamic and liquid water profiles can be retrieved by a ground-based microwave radiometer (MWR) in nearly all weather conditions, which is useful for detecting mesoscale phenomena. This paper reviews the advances in remote sensing of atmospheric profiles and cloud properties by MWR in central China. Comparative studies indicate that MWR retrieval accuracy is different under various skies, especially those that decay under precipitation. The off-zenith method is proven to be capable of reducing the impact of precipitation and snow on MWR retrieval accuracy. Application studies demonstrate that MWR retrievals are helpful for early warning of rainstorms, hailstorms, and thunderstorms. Moreover, MWR retrievals provide a way to study cloud properties. The temporal variations of cloud occurrence frequency (COF) and liquid water path (LWP) are different for low, middle, and high clouds, and the vertical distribution of COF is also different in autumn and other seasons. Note that MWR can infer valid retrievals over the eastern Tibetan Plateau due to the weak precipitation over there. Also, cloud properties over the eastern Tibetan Plateau present differences from those over central China, and this is related to the different characteristics of atmospheric water vapor between these two regions. To bring more benefits for mechanism study and early warning of severe weather and numerical weather prediction, the decayed accuracy of MWR zenith retrievals under precipitation should be resolved. And combining MWR with other instruments is necessary for MWR application in detecting multi-layer clouds and ice clouds. [ABSTRACT FROM AUTHOR]

Monitoring mine activities can help management track the status of mineral resource exploration and mine rehabilitation. It is crucial to the sustainable development of the mining industry and the protection of the geological environment in mining areas. To monitor the mining activities of shallow surface outcrops in the arid and semi-arid regions of northwest China, this paper proposes a remote sensing monitoring approach of mining activities based on deep learning and integrated interferometric synthetic aperture radar technique. This approach uses the DeepLabV3-ResNet model to identify and extract the spatial location of the mine patches and then uses object-oriented analysis and spatial analysis methods to optimize the mine patch boundaries. SBAS-InSAR technique is used to obtain the time-series deformation information of the mine patches and is combined with the multi-temporal optical imagery to analyze the mining activities in the study area. The proposed approach has a recognition accuracy of 95.80% for the identification and extraction of mine patches, with an F1-score of 0.727 at the pixel level, and the average area similarity for all patches is 0.78 at the object-oriented level. The proposed approach possesses the capability to analyze mining activities, indicating promising prospects for engineering applications. It provides a reference for monitoring mining activities using multisource satellite remote sensing. [ABSTRACT FROM AUTHOR]

The evaluation of satellite soil moisture is a big challenge owing to the large spatial mismatch between pixel-based satellite soil moisture products and point-based in situ measurements. Upscaling in situ measurements to obtain the "true value" of soil moisture content at the satellite grid/footprint scale can make up for the scale difference and improve the validation. Many existing upscaling methods have strict requirements regarding the spatial distribution and quantity of soil moisture sensors. However, in reality, soil-moisture-monitoring networks are commonly sparse with low sensor density, which increases the difficulty of obtaining accurate upscaled soil moisture data and limits the validation of satellite products. For this reason, this paper proposes a scheme to upscale in situ measurements using five machine learning methods along with Landsat 8 datasets and DEM data to validate the accuracy of a SMAP-enhanced passive soil moisture product for a sparse network on the Qinghai–Tibet Plateau. The proposed scheme realizes the upscaling of in situ soil moisture data to the pixel scale (30 m × 30 m) and then to the coarse grid scale (9 km × 9 km) by using multi-source remote sensing data as the bridge of scale conversion. The long-time SMAP SM products since April 2015 on the Qinghai–Tibet Plateau were validated based on upscaled soil moisture data. The results show that (1) random forest regression performs the best, and the upscaled soil moisture data reflect the region-average soil moisture conditions that can be used for evaluating SMAP data; (2) the SMAP product meets its scientific measurement requirements; and (3) the SMAP product generally underestimates the soil moisture in the study area. [ABSTRACT FROM AUTHOR]

The analysis of marine environmental parameters plays a significant role in various aspects, including sea surface target detection, the monitoring of the marine ecological environment, marine meteorology and disaster forecasting, and the monitoring of internal waves in the ocean. In particular, for sea surface target detection, the accurate and high-resolution input of marine environmental parameters is crucial for multi-scale sea surface modeling and the prediction of sea clutter characteristics. In this paper, based on the low-resolution wind speed, significant wave height, and wave period data provided by ECMWF for the surrounding seas of China (specified latitude and longitude range), a deep learning model based on a residual structure is proposed. By introducing an attention module, the model effectively addresses the poor modeling performance of traditional methods like nearest neighbor interpolation and linear interpolation at the edge positions in the image. Experimental results demonstrate that with the proposed approach, when the spatial resolution of wind speed increases from 0.5° to 0.25°, the results achieve a mean square error (MSE) of 0.713, a peak signal-to-noise ratio (PSNR) of 49.598, and a structural similarity index measure (SSIM) of 0.981. When the spatial resolution of the significant wave height increases from 1° to 0.5°, the results achieve a MSE of 1.319, a PSNR of 46.928, and an SSIM of 0.957. When the spatial resolution of the wave period increases from 1° to 0.5°, the results achieve a MSE of 2.299, a PSNR of 44.515, and an SSIM of 0.940. The proposed method can generate high-resolution marine environmental parameter data for the surrounding seas of China at any given moment, providing data support for subsequent sea surface modeling and for the prediction of sea clutter characteristics. [ABSTRACT FROM AUTHOR]

The net primary productivity (NPP) of vegetation is an important indicator reflecting the vegetation dynamics and carbon sequestration capacity in a region. In recent years, China has implemented policies to carry out ecological protection. To understand the changes in the distribution of vegetation NPP in China and the influence of climate factors, the Carnegie–Ames–Stanford approach (CASA) model was used to estimate the NPP from 2001 to 2020. In this paper, several sets of measurement datasets and products were collected to evaluate the effectiveness of the model and suggestions were provided for the modification of the CASA model based on the evaluation results. In addition to the correlation analysis, this paper presents a statistical method for analyzing the quantitative effects in individual climatic factors on NPP changes in large regions. The comparison found that the model has a better estimation effect on grassland and needleleaf forest. The estimation error for the evergreen needleleaf forest (ENF) and deciduous broadleaf forest (DBF) decreases with the warming of the climatic zone, while the evergreen broadleaf forest (EBF) and deciduous needleleaf forest (DNF) do the opposite. The changes in total CASA NPP were consistent with the trends of other products, showing a dynamic increasing trend. In terms of the degree of correlation between the NPP changes and climatic factors, the NPP changes were significantly correlated with temperature in about 10.39% of the vegetation cover area and with precipitation in about 26.92% of the vegetation cover area. It was found that the NPP variation had a negative response to the temperature variation in Inner Mongolia grasslands, while it had a positive but small effect (±10 g C) in the Qinghai–Tibet Plateau grasslands. Precipitation had a facilitative effect on the grassland NPP variation, while an increase in the annual precipitation of more than 200 mm had an inhibitory effect in arid and semi-arid regions. This study can provide data and methodological reference for the ecological assessment of large-scale regional and climate anomalous environments. [ABSTRACT FROM AUTHOR]

Using a shape model (SM) is a typical method to determine the phenological phases of crops with long-time-series satellite remote sensing data. The average AGDD-based shape model (AAGDD-SM) takes temperature into account compared to SM, however, the commonly used daily average temperature is not sufficient to determine the exact AGDD owing to the possibly significant changes in temperatures throughout the day. In this paper, a modified shape model was proposed for the better estimation of phenological dates and it is incorporated into the continuous AGDD (CAGDD) which was calculated based on temperatures from a continuous 24 h within a day, different from the calendar day or the average AGDD indicators. In this study, the CAGDD replaced the abscissa of the NDVI growth curve over a 5-year period (2014 to 2018, excluding 2015) for a test site of early rice in Jiangxi province of China. Four key phenological phases, including the reviving, tillering, heading and anthesis phases, were selected and determined with reference to the field-observed phenological data. The results show that compared with the AAGDD-SM, the method proposed in this paper has basically improved the prediction of each phenological period. For those cases where the average temperature is lower than the minimum temperatures (K1) but the effective accumulated temperature is not zero, more accurate AGDD can be calculated according to the method in this paper. [ABSTRACT FROM AUTHOR]

In the context of global sustainable development, solar energy is very widely used. The installed capacity of photovoltaic panels in countries around the world, especially in China, is increasing steadily and rapidly. In order to obtain accurate information about photovoltaic panels and provide data support for the macro-control of the photovoltaic industry, this paper proposed a hierarchical information extraction method, including positioning information and shape information, and carried out photovoltaic panel distribution mapping. This method is suitable for large-scale centralized photovoltaic power plants based on multi-source satellite remote sensing images. This experiment takes the three northwest provinces of China as the research area. First, a deep learning scene classification model, the EfficientNet-B5 model, is used to locate the photovoltaic power plants on 16-m spatial resolution images. This step obtains the area that contains or may contain photovoltaic panels, greatly reducing the study area with an accuracy of 99.97%. Second, a deep learning semantic segmentation model, the U2-Net model, is used to precisely locate photovoltaic panels on 2-m spatial resolution images. This step achieves the exact extraction results of the photovoltaic panels from the area obtained in the previous step, with an accuracy of 97.686%. This paper verifies the superiority of a hierarchical information extraction method in terms of accuracy and efficiency through comparative experiments with DeepLabV3+, U-Net, SegNet, and FCN8s. This meaningful work identified 180 centralized photovoltaic power plants in the study area. Additionally, this method makes full use of the characteristics of different remote sensing data sources. This method can be applied to the rapid extraction of global photovoltaic panels. [ABSTRACT FROM AUTHOR]

In this paper, multi-source observation, such as aircraft, ground-based remote sensing, and satellite-retrieved data, has been utilized to compare and analyze the vertical characteristics of aerosol optical properties and the planetary boundary layer height (HPBL) over the North China Plain (NCP) region during May–June 2016. Aircraft observations show the vertical profiles of aerosol absorption coefficients (σabs), scattering coefficients (σsca), and extinction coefficients (σext) gradually decrease with altitude, with their maximum values near HPBL. The vertical profiles of σext depended most on the vertical distribution of measured σsca, indicating a significant contribution of scattering aerosols. In addition, the prominent characteristic of the inverse relationship between σext and moisture profile could serve as a reference for predicting air quality in the NCP region. The lower layer pollution during the field experiment was likely caused by the accumulation of fine-mode aerosols, characterized by the vertical distribution of the Ångström exponent and the Aerosol Robotic Network (AERONET) products. Typically, HPBL derived from aircraft and surface Micro Pulse Lidar (MPL) was approximate, while the predicted HPBL by meteorological data indicates an underestimation of ~192 m. Aerosol optical depth (AOD) calculated from aircraft and ground-based remote sensing (such as MPL and AERONET) experienced a strong correlation, and both of them exhibited a similar tendency. However, the AOD retrieved from satellites was significantly larger than that from aircraft and ground-based remote sensing. Overall, the inversion algorithm, cloud identification algorithm, representativeness of the space, and time of the observation may lead to an overestimation or underestimation of AOD under certain circumstances. This study may serve as a re-evaluation of AOD retrieved from multi-source observations and provide a reference to uncover the actual atmospheric environment in the NCP regions. [ABSTRACT FROM AUTHOR]

This study investigates the application of hyperspectral image space–spectral fusion technology in lithologic classification, using data from China's GF-5 and Europe's Sentinel-2A. The research focuses on the southern region of Tuanjie Peak in the Western Kunlun Range, comparing five space–spectral fusion methods: GSA, SFIM, CNMF, HySure, and NonRegSRNet. To comprehensively evaluate the effectiveness and applicability of these fusion methods, the study conducts a comprehensive assessment from three aspects: evaluation of fusion effects, lithologic classification experiments, and field validation. In the evaluation of fusion effects, the study uses an index analysis and comparison of spectral curves before and after fusion, concluding that the GSA fusion method performs the best. For lithologic classification, the Random Forest (RF) classification method is used, training with both area and point samples. The classification results from area sample training show significantly higher overall accuracy compared to point samples, aligning well with 1:50,000 scale geological maps. In field validation, the study employs on-site verification combined with microscopic identification and comparison of images with actual spectral fusion, finding that the classification results for the five lithologies are essentially consistent with field validation results. The "GSA+RF" method combination established in this paper, based on data from GF-5 and Sentinel-2A satellites, can provide technical support for lithological classification in similar high-altitude regions. [ABSTRACT FROM AUTHOR]

Mountainous terrains are typical over southeast China, with complex and diverse topography, large terrain undulations, rich geographic features, and meteorological variations. Previous studies show that ERA5 meteorological variables are generally accurate with respect to large plains or urban agglomerations, while their applicability to mountainous areas remains inconclusive. In this paper, using high-precision measurements probed by ground-based remote sensing instruments in May–July 2023 at a typical mountainous Shanghuang site in southeast China, the vertical accuracy of the ERA5 reanalysis datasets were comparatively evaluated. Our findings depict that the horizontal wind speeds of the ERA5 reanalysis data show a good performance compared to the Doppler lidar observations. In quantitative terms, ERA5 horizontal wind speeds are about 8% higher than the observed values below a height of 400 m, while above 400 m, an increasing negative bias is observed along as altitude increases. Differing from the horizontal wind speeds, there is a large discrepancy in the vertical wind speeds between the ERA5 and the observations, with a deviation of −150% to 40%. In terms of the thermal variables, the temperature extracted from ERA5 are consistent with the measurements in the low troposphere. Nevertheless, large systematic errors occur at 2000–3000 m, and the overall presentation shows that the errors gradually increase with the increase in altitude. Concerning the relative humidity, the general trend in ERA5 is similar to that observed by the microwave radiometer, but the relative errors from 500 to 2500 m range from 40% to 100%. This study also reveals that ERA5 is poorly representative and requires further improvements during extreme weather events such as rainstorms and typhoons. In particular, the horizontal wind speeds at the middle and lower levels deviate strongly from the observations. Given the importance of atmospheric thermodynamic stratifications in terms of both environmental and climatic issues, the results expand the application of the ERA5 reanalysis datasets in the mountainous areas of southeast China. More importantly, it provides credible reference data for the meteorological predictions and climate modelings in the southeast China mountainous region. [ABSTRACT FROM AUTHOR]