Search

Renewable energy sources, such as solar, wind, biomass, and geothermal energy, are being more and more adopted in small and micro-scale distributed generation systems. In this context, different hybrid configurations and layouts that may adopt, lead to different energy and economic performance of energy generation systems. In micro-scale applications, biomass and solar energy sources are more frequently investigated in literature compared to other combinations as biomass and wind energy. The analysis of the performance of a novel small-scale trigeneration system is presented in this paper. The system includes biomass boiler, water steam turbine, absorption chiller, and wind turbine, and it is linked to the electric grid by means of a bidirectional connection, allowing to the store virtually the electrical energy produced in excess, and use when needed. For the proposed system, a zootechnical farm and a residential building are considered as case study, including different scenarios for the reference energy system. The Transient System Simulation (TRNSYS software is used to model, simulate, and investigate the system performance under realistic operation conditions. Energy and economic performance of the system is assessed by means of a daily, weekly, and yearly analysis. The effect of the main design parameters, as steam and wind turbine power on the system performance, is investigated by means of a sensitivity analysis. The investigations show that the Simple Pay Back time of the proposed system is below 6 years, when the biomass is free, capacities of steam and wind turbines lower than 4 kW are selected, and a reference system with a natural gas boiler and electrical grid is considered. The system allows one to achieve satisfactory energy and economic performance under the considered conditions, when a proper design of the system component capacities is adopted. [ABSTRACT FROM AUTHOR]

Combined heat and power systems dedicated to micro-scale applications are currently increasing in popularity. The use of such systems is beneficial from the standpoint of increasing the usage of renewable energy, increasing energy efficiency and reducing CO2 emissions into the atmosphere. This paper shows two examples of prototypical micro-cogeneration systems powered by biomass. In the first, smaller one, electricity is generated in thermoelectric generators using heat from the wood-fired stove. The second one is equipped with a 100 kWt batch boiler and operates according to a modified Rankine cycle. The energy and ecological analysis were conducted and discussed, including selected aspects of heat and power generation and gaseous pollutant emission. Measurements were performed using a dedicated control and measurement station with a PLC controller. As was shown, thermoelectric generators operated respectively with the power of 22.5 We in the case of the air-cooled unit and 31.2 We in the case of the water-cooled unit. On the other hand, the maximum power level of ca. 1145 We was obtained in the system with a batch boiler operating according to a modified Rankine cycle. The ecological analysis showed that the average amount of CO emission during the wood combustion in the tested stove was 1916 mg/m3 (in the combustion phase). In the case of straw combustion, it was characterized by lower CO2 emissions compared to coal, but higher CO2 emissions compared to gasoline and natural gas. Based on the obtained results, some outlines for the systems development were given. [ABSTRACT FROM AUTHOR]