Search

Intra-cellular active transport by native cargos is ubiquitous. We investigate the motion of spherical nano-particles (NPs) grafted with flexible polymers that end with a nuclear localization signal peptide. This peptide allows the recruitment of several mammalian dynein motors from cytoplasmic extracts. To determine how motor-motor interactions influenced motility on the single microtubule level, we conducted bead-motility assays incorporating surface adsorbed microtubules and combined them with model simulations that were based on the properties of a single dynein. The experimental and simulation results revealed long time trajectories: when the number of NP-ligated motors N m increased, run-times and run-lengths were enhanced and mean velocities were somewhat decreased. Moreover, the dependence of the velocity on run-time followed a universal curve, regardless of the system composition. Model simulations also demonstrated left- and right-handed helical motion and revealed self-regulation of the number of microtubule-bound, actively transporting dynein motors. This number was stochastic along trajectories and was distributed mainly between one, two, and three motors, regardless of N m . We propose that this self-regulation allows our synthetic NPs to achieve persistent motion that is associated with major helicity. Such a helical motion might affect obstacle bypassing, which can influence active transport efficiency when facing the crowded environment of the cell.

In recent years, molecularly imprinted polymers (MIPs) have become an excellent solution to the selective and sensitive determination of target molecules in complex matrices where other similar and relative structural compounds could coexist. Although MIPs show the inherent properties of the polymers, including stability, robustness, and easy/cheap synthesis, some of their characteristics can be enhanced, or new functionalities can be obtained when nanoparticles are incorporated in their polymeric structure. The great variety of nanoparticles available significantly increase the possibility of finding the adequate design of nanostructured MIP for each analytical problem. Moreover, different structures (i.e., monolithic solids or MIPs micro/nanoparticles) can be produced depending on the used synthesis approach. This review aims to summarize and describe the most recent and innovative strategies since 2015, based on the combination of MIPs with nanoparticles. The role of the nanoparticles in the polymerization, as well as in the imprinting and adsorption efficiency, is also discussed through the review.

Solution electrospinning process (SEP) is a versatile technique for generating non-woven fibrous materials intended to a wide range of applications. One of them is the production of fibrous and porous scaffolds aiming to mimic bone tissue, as artificial extracellular matrices (ECM). In the present work, pure and nano-modified electrospun polyetherimide (PEI) scaffolds have been successfully fabricated. The nano-modified ones include (a) graphene nano-platelets (GNPs), (b) hydroxyapatite (HAP), and (c) mixture of both. After fabrication, the morphological characteristics of these scaffolds were revealed by using scanning electron (SEM) and transmission electron (TEM) microscopies, while porosity and mean fiber diameter were also calculated. In parallel, contact angle experiments were conducted so that the hydrophilicity level of these materials to be determined. Finally, the mechanical performance of the fabricated scaffolds was investigated by conducting uniaxial tensile tests. Ιn future work, the fabricated scaffolds will be further utilized for investigation as potential candidate materials for cell culture with perspective in orthopedic applications.

Electromagnetic properties of cylindrical active coated nano-particles comprised of a silica nano-cylinder core layered with a plasmonic concentric nano-shell are investigated for potential nano-sensor applications. Particular attention is devoted to the near-field properties of these particles, as well as to their far-field radiation characteristics, in the presence of an electric or a magnetic line source. A constant frequency canonical gain model is used to account for the gain introduced in the dielectric part of the nano-particle, whereas three different plasmonic materials (silver, gold, and copper) are employed and compared for the nano-shell layers.

Novel Au nano-particle catalysts immobilized on both titanium(IV)- and alkylthiol-functionalized SBA-15 type ordered mesoporous silicate supports were developed. The bi-functionalized SBA-15 type support could be synthesized by a one-pot method. To the synthesized supports, Au was immobilized by the reaction of the alkylthiol groups on the supports with AuCl4−, following reduction with NaBH4. The immobilized amount and the formed structures and the electronic property of the Au species depended on the loading of alkylthiol. The moderate size (2–3 nm) nano particulate Au sites formed on Ti(0.5)-SBASH(0.5) were negatively charged. The aerobic alcohol oxidation activity of the catalysts depended on the loading of alkylthiol and the structure of the Au nano-particles. The non-thiol-functionalized catalyst (Au/Ti(0.5)-SBASH(0)) composed of the large (5–30 nm) and the higher thiol-loaded catalyst (Au/Ti(0.5)-SBASH(8)) composed of the small cationic Au species were almost inactive. The most active catalyst was Au/Ti(0.5)-SBASH(0.5) composed of the electron-rich Au nano-particles formed by the electron donation from the highly dispersed thiol groups. Styrene oxidation activity in the presence of 1-phenylethanol with O2 depended on the loadings of titanium(IV) on the Au/Ti(x)-SBASH(0.5). The titanium(IV) sites trapped the H2O2 generated through the alcohol oxidation reaction, and also contributed to the alkene oxidation by activating the trapped H2O2. [ABSTRACT FROM AUTHOR]

Tailor-made and designed micro- and nanocarriers can bring significant benefits over their traditional macroscopic counterparts in drug delivery applications. For the successful loading and subsequent release of bioactive compounds, carriers should present a high loading capacity, trigger release mechanisms, biodegradability and biocompatibility. Hydrophobic drug molecules can accumulate in fat tissues, resulting in drawbacks for the patient's recovery. To address these issues, we propose to combine the advantageous features of both host molecules (cyclodextrin) and calcium carbonate (CaCO3) particles in order to load hydrophobic chemicals. Herein, hybrid cyclodextrin-CaCO3 micro- to nano-particles have been fabricated by combining Na2CO3 solution and CaCl2 solution in the presence of an additive, namely poly (vinylsulfonic acid) (PVSA) or glycerol (gly). By investigating experimental parameters and keeping the Na2CO3 and CaCl2 concentrations constant (0.33 M), we have evidenced that the PVSA or gly concentration and mixing time have a direct impact on the final cyclodextrine-CaCO3 particle size. Indeed, by increasing the concentration of PVSA (5 mM to 30 mM) or gly (0.7 mM to 4 mM) or the reaction time (from 10 min to 4 h), particles with a size of 200 nm could be reached. Interestingly, the vaterite or calcite form could also be selected, according to the experimental conditions. We hypothesised that the incorporation of PVSA or gly into the precipitation reaction might reduce the nucleation rate by sequestering Ca2+. The obtained particles have been found to keep their crystal structure and surface charge after storage in aqueous media for at least 6 months. In the context of improving the therapeutic benefit of hydrophobic drugs, the developed particles were used to load the hydrophobic drug tocopherol acetate. The resulting particles are biocompatible and highly stable in a physiological environment (pH 7.4, 0.15 M NaCl). A selective release of the cargo is observed in acidic media (pH lower than 5). [ABSTRACT FROM AUTHOR]

This article is an attempt to explore the heat transfer features of the steady three-dimensional rotating flow of magneto-hydrodynamic hybrid nanofluids under the effect of nonlinear radiation over the bi-directional stretching surface. For this purpose, two different nano-particles, namely silver (Ag) and molybdenum di-sulfide (MoS2), were selected. Three different conventional base fluids were utilized to form desired hybrid nanofluids such as water (H2O), engine oil (EO), and ethylene glycol (EG). We obtained steady three-dimensional highly nonlinear partial differential equations. These highly nonlinear partial differential equations cannot be solved analytically, so these equations were handled in MATLAB with the BVP-4C technique with convergence tolerance at 10−6. The graph depicts the effect of the magnetization effect, thermal radiation, and stretching ratio on rotating hybrid nanofluids. Additionally, the impact of thermal radiation on the heat coefficient of three different hybrid nanofluids is being investigated. The augmentation in magnetization decreases the primary velocity, whereas the increment in radiation enhances the primary velocity. The stretching ratio and the presence of higher magnetic forces increase the temperature profile. The concentration profile was enhanced with an increment in the magnetic field, stretching, and rotation ratio. The maximum Nusselt number was achieved for the Ag-MoS2/EO hybrid nanofluid. It was concluded that augmentation in nonlinear radiation enhances the heat transfer coefficient for the examined cases (I) and (II) of the hybrid nanofluids. The Nusselt number doubled for both the examined cases under nonlinear radiation. Moreover, it was discovered that Ag-MoS2/water produced the best heat transfer results under nonlinear radiation. Therefore, the study recommends more frequent exploration of hybrid nanofluids (Ag-MoS2/water) when employing nonlinear radiation to analyze the heat transfer coefficient. [ABSTRACT FROM AUTHOR]

The most successful medical intervention for preventing infectious diseases is still vaccination. This effective strategy has resulted in decreased mortality and extended life expectancy. However, there is still a critical need for novel vaccination strategies and vaccines. Antigen cargo delivery by nanoparticle-based carriers could promote superior protection against constantly emerging viruses and subsequent diseases. This should be sustained by the induction of vigorous cellular and humoral immunity, capable of acting both at the systemic and mucosal levels. Induction of antigen-specific responses at the portal of entry of pathogens is considered an important scientific challenge. Chitosan, which is widely regarded as a biodegradable, biocompatible and non-toxic material for functionalized nanocarriers, as well as having adjuvant activity, enables antigen administration via less-invasive mucosal routes such as sublingual or pulmonic application route. In this proof of principle study, we evaluate the efficacy of chitosan nanocarriers loaded with the model antigen Ovalbumin (OVA) co-administrated with the STING agonist bis-(3′,5′)-cyclic dimeric adenosine monophosphate (c-di-AMP) given by pulmonary route. Here, BALB/c mice were immunized with four doses of the formulation that stimulates enhanced antigen-specific IgG titers in sera. In addition, this vaccine formulation also promotes a strong Th1/Th17 response characterized by high secretion of IFN-γ, IL-2 and IL-17, as well as induction of CD8+ T cells. Furthermore, the novel formulation exhibited strong dose-sparing capacity, enabling a 90% reduction of the antigen concentration. Altogether, our results suggest that chitosan nanocarriers, in combination with the mucosal adjuvant c-di-AMP, are a promising technology platform for the development of innovative mucosal vaccines against respiratory pathogens (e.g., Influenza or RSV) or for therapeutic vaccines. [ABSTRACT FROM AUTHOR]

With the rapid development of metal-organic frameworks (MOF), the toxicity and environmental safety of MOF materials should be thoroughly investigated. The behaviors and bio-effects of MOF materials after oral exposure are largely unknown. In this study, we performed a pilot toxicity evaluation of MOF-74(Co) nanoparticles (NPs) both in vitro and in vivo. The cell viability and cell cycle were monitored after LO2 cells were incubated with MOF-74(Co). The Co contents, bodyweight, serum biochemistry, histopathological changes, and oxidative stress parameters were measured after oral exposure to MOF-74(Co) NPs in mice. LO2 cells showed viability loss at 100 mg/L. The cell cycle arrest was more sensitive, which was observed even at 12.5 mg/L. MOF-74(Co) NPs led to a significant accumulation of Co in the liver and kidneys. No bodyweight loss was observed and the serum biochemical index was mainly unchanged. Except for slight inflammation, the histopathological images of the liver and kidneys after oral exposure to MOF-74(Co) NPs were normal compared to the control. Meaningful oxidative stress was found in the liver and kidneys. The results collectively indicated the low toxicity of MOF-74(Co) NPs after oral exposure in mice. [ABSTRACT FROM AUTHOR]

Novel hydrogels were prepared by blending chitosan and poly(vinyl alcohol), PVA, then crosslinking the resulting blends using trimellitic anhydride isothiocyanate at a concentration based on chitosan content in the blends. The weight ratios of chitosan: PVA in the blends were 1:3, 1:1, and 3:1 to produce three hydrogels symbolized as H13, H11, and H31, respectively. For a comparison, H10 was also prepared by crosslinking pure chitosan with trimellitic anhydride isothiocyanate. For further modification, three H31/silver nanocomposites (AgNPs) were synthesized using three different concentrations of silver nitrate to obtain H31/AgNPs1%, H31/AgNPs3% and H31/AgNPs5%. The structures of the prepared samples were emphasized using various analytical techniques. PVA has no inhibition activity against the tested microbes and biofilms. The antimicrobial and anti-biofilm formation activities of the investigated samples was arranged as: H31/AgNPs5% ≥ H31/AgNPs3% > H31/AgNPs1% > H10 > H31 > H11 > H13 > chitosan. H31/AgNPs5% and H31/AgNPs3% were more potent than Vancomycin and Amphotericin B against most of the tested microbes. Interestingly, H31 and H31/AgNPs3% were safe on the normal human cells. Consequently, hydrogels resulting from crosslinked blends of chitosan and PVA loaded with AgNPs in the same structure have significantly reinforced the antimicrobial and inhibition activity against the biofilms of PVA. [ABSTRACT FROM AUTHOR]

The amount of by-products/waste in the fish industry is roughly 50%. Fish bones could be used to produce nanoparticles, which may have potential use in the food industry as a novel calcium source and at the same time, contribute to reduce waste production. The objective of this study was to evaluate the bioavailability of nano-size salmon fish bone particles compared to micro-size salmon fish bone particles, and calcium carbonate. The study was carried out in 21–28-day-old C57BL/6 male mice fed for 21 days with the experimental diets. The groups were as follows: CaCO3 0.5% Ca (CN 0.5); CaCO3 1.0% Ca (CN 1.0); salmon fish bone (SFB) microparticles 0.5% Ca (MP 0.5); SFB microparticles 1.0% Ca (MP 1.0); SFB nanoparticles 0.5% Ca (NP 0.5); and SFB nanoparticles 1.0% Ca (NP 1.0). Calcium bioavailability, defined as the percent calcium in femur showed an increasing trend from CN 0.5 to NP 1.0 group. According to ANCOVA, the greatest Ca content was observed in the NP 1.0 group compared with all groups but NP 0.5. In conclusion, in a murine model, salmon fish bone nanoparticles present higher calcium bioavailability than salmon fish bone microparticles, and both, in turn, have better bioavailability than calcium carbonate. [ABSTRACT FROM AUTHOR]

This study explores the impact of silica nanoparticles on jute fiber-reinforced composites with epoxy resin matrices. Silica nanoparticles were synthesized at three concentrations (3%, 6%, and 9%) and incorporated into composites at varying fiber–resin weight ratios. The composites were subjected to tests for tensile strength, flexural strength, impact strength, and hardness. The Taguchi signal-to-noise ratio method was employed for optimization. Results indicate that a 9% addition of silica nanoparticles significantly enhances the mechanical properties of jute fiber-reinforced composites. Tensile and flexural strength increased with higher silica nanoparticle content, while impact strength and hardness also improved. Notably, a 9% silica addition achieved a maximum tensile strength of 72 MPa, resulting in a 10% increase over that yielded by the 3% addition. Flexural and impact strengths improved by 23% and 20%, respectively, when compared to the 3% silica addition. Furthermore, a neural network model accurately predicted the composite's mechanical characteristics with 100% accuracy. These findings hold promise for the automobile and aircraft industries, as they require high-performance materials. The integration of jute fibers and silica nanoparticles into composites offers a sustainable and eco-friendly alternative to conventional materials. The enhancement strategy employed in this analysis can be applied to enhance the mechanical properties of other composite materials. [ABSTRACT FROM AUTHOR]

To prevent soiling of marble exposed outdoors, the use of TiO2 nano-particles has been proposed in the literature by two main routes, both raising durability issues: (i) direct application to marble surface, with the risk of particle leaching by rainfall; (ii) particle incorporation into inorganic or organic coatings, with the risk of organic coating degradation catalyzed by TiO2 photoactivity. Here, we investigated the combination of nano-TiO2 and hydroxyapatite (HAP), previously developed for marble protection against dissolution in rain and mechanical consolidation. HAP-TiO2 combination was investigated by two routes: (i) sequential application of HAP followed by nano-TiO2 (“H+T”); (ii) simultaneous application by introducing nano-TiO2 into the phosphate solution used to form HAP (“HT”). The self-cleaning ability was evaluated before and after prolonged exposure to simulated rain. “H+T” and “HT” coatings exhibited much better resistance to nano-TiO2 leaching by rain, compared to TiO2 alone. In “H+T” samples, TiO2 nano-particles adhere better to HAP (having flower-like morphology and high specific surface area) than to marble. In “HT” samples, thanks to chemical bonds between nano-TiO2 and HAP, the particles are firmly incorporated in the HAP coating, which protects them from leaching by rain, without diminishing their photoactivity and without being degraded by them. [ABSTRACT FROM AUTHOR]

We demonstrate in situ recorded motion of nano-objects adsorbed on a photosensitive polymer film. The motion is induced by a mass transport of the underlying photoresponsive polymer material occurring during irradiation with interference pattern. The polymer film contains azobenzene molecules that undergo reversible photoisomerization reaction from trans- to cis-conformation. Through a multi-scale chain of physico-chemical processes, this finally results in the macro-deformations of the film due to the changing elastic properties of polymer. The topographical deformation of the polymer surface is sensitive to a local distribution of the electrical field vector that allows for the generation of dynamic changes in the surface topography during irradiation with different light interference patterns. Polymer film deformation together with the motion of the adsorbed nano-particles are recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the surface deformation. The particles undergo either translational or rotational motion. The direction of particle motion is towards the topography minima and opposite to the mass transport within the polymer film. The ability to relocate particles by photo-induced dynamic topography fluctuation offers a way for a non-contact simultaneous manipulation of a large number of adsorbed particles just in air at ambient conditions. [ABSTRACT FROM AUTHOR]

We investigate the optomechanical effect on a single nano-particle inside an optical cavity, by deriving the optical forces acting on the nano-particle by the cavity from quantum theory. We obtain the steady state of the system and found that the force contains three terms associated with the gradient force, the back-action force resulting from the intra-cavity photon energy change, as well as the reactive force associated with the coupling between the external field and the cavity. Moreover, we solve the dynamical system for a dielectric particle in a small mode volume cavity, which is characterized by a quasi-periodic pattern. These results are important for understanding the control of various types of levitated nano-particles through optomechanical coupling. [ABSTRACT FROM AUTHOR]

The synthesis of polymer brush decorated silica nano-particles is demonstrated by activator regeneration by electron transfer atom transfer radical polymerization (ARGET ATRP) grafting of poly(tert-butyl methacrylate). ATRP initiator decorated silica nano-particles were obtained using a novel trimethylsiloxane derivatised ATRP initiator obtained by click chemistry. Comparison of de-grafted polymers with polymer obtained from a sacrificial initiator demonstrated good agreement up to 55% monomer conversion. Subsequent mild deprotection of the tert-butyl ester groups using phosphoric acid yielded highly colloidal and pH stable hydrophilic nano-particles comprising approximately 50% methacrylic acid groups. The successful bio-conjugation was achieved by immobilization of Horseradish Peroxidase to the polymer brush decorated nano-particles and the enzyme activity demonstrated in a conversion of o-phenylene diamine dihydrochloride assay. [ABSTRACT FROM AUTHOR]

The effect produced by the application of methyl jasmonate (MeJA) in vineyards is clear, but this is a product that, despite its efficiency, is expensive, volatile and difficult to dissolve. Regarding increasing the MeJA use efficiency, new forms of application are proposed in this article, such as the use of calcium phosphate nanoparticles with two different morphologies: amorphous (ACP) and crystalline (Ap). In addition, few of the studies addressed so far have assessed MeJA's effect during the ripening period of the grapes. As a result of this, in this article, we evaluated/studied for first time the effect of the different MeJA formats on the phenolic composition of the grape during the ripening period. The results showed small differences between the two morphologies of the nanoparticles, which promoted a significant a delay in the sugar accumulation and an increase in the different phenolic compounds compared to the control. Such improvements were not as significant as those induced by the conventional MeJA treatment. However, it is remarkable that when the nanoparticles were applied, we used a concentration 10 times lower than when it is used conventionally. Therefore, these findings revealed that both types of calcium phosphate nanoparticles are potential MeJA nanocarriers allowing for the increase in the quality of the grapes at the time of harvest in a more sustainable way, although future studies must be carried out in order to optimise the concentration with which these nanoparticles are doped. [ABSTRACT FROM AUTHOR]

As the knowledge about the interferences of nanomaterials on human staminal cells are scarce and contradictory, we undertook a comparative multidisciplinary study based on the size effect of zero-valent iron, cobalt and nickel microparticles (MPs) and nanoparticles (NPs) using human adipose stem cells (hASCs) as a model and evaluating cytotoxicity, morphology, cellular uptake and gene expression. Our results suggested that the medium did not influence the cell sensitivity but, surprisingly, the iron microparticles (FeMPs) resulted in being toxic. These data were supported by modifications in mRNA expression of some genes implicated in the inflammatory response. Microscopic analysis confirmed that NPs, mainly internalized by endocytosis, persist in the vesicles without any apparent cell damage. Conversely, MPs are not internalized and the effects on hASCs have to be ascribed to the release of ions in the culture medium, or to the reduced oxygen and nutrient exchange efficiency due to the presence of MP agglomerating around the cells. Notwithstanding the results depicting a heterogeneous scene that does not allow drawing a general conclusion, this work reiterates the importance of comparative investigations on MPs, NPs and corresponding ions and the need to continue the thorough verification of NP and MP innocuousness to ensure unaffected stem cell physiology and differentiation. [ABSTRACT FROM AUTHOR]

The properties and photocatalytic performance of anatase nanoparticles of pure TiO2 and a core-shell structure of TiO2 on calcined vetiver grass leaves have been compared. Samples were fabricated by sol-gel and heating at 450 - °C for 5 h. The comparison was based on data for X-ray diffraction (XRD), UV-Vis spectrophotometry, photoluminescence, transmission electron microscopy, specific surface area measurement, pore volume assessment, and methylene blue degradation testing. The results showed that the pure TiO2 consisted of agglomerated equiaxed nanoparticles of individual grain sizes in the range 10-20 nm. In contrast, the TiO2-vetiver composite exhibited a core-shell structure consisting of a carbonaceous core and TiO2 shell of thickness 10-15 nm. These features influenced the photocatalytic performance in such a way that the lower cross-sectional area, greater surface area, and higher pore volume of the TiO2 shell increased the number of active sites, reduced the charge carrier diffusion distance, and reduced the recombination rate, thereby improving the photocatalytic activity. This improvement derived from morphological characteristics rather than crystallographic, semiconducting, or optical properties. The improved performance of the TiO2-vetiver core-shell was unexpected since the X-ray diffraction data showed that the crystallinity of the TiO2 was lower than that of the pure TiO2. These outcomes are attributed to the reducing effect of the carbon on the TiO2 during heating, thereby facilitating the formation of oxygen vacancies, which enhance charge separation and hence photocatalysis by TiO2. [ABSTRACT FROM AUTHOR]

In Fe-Mn-Al-Ni shape memory alloys, the stabilization of superelasticity would be affected by the undesired precipitation of B2 nano-particles during natural aging. In order to solve this problem, the effect of Mo alloying on the precipitation behavior of B2 nano-particles during the cooling and natural aging processes was performed by scanning electron microscope, transmission electron microscope and Vickers microhardness test in two Fe-Mn-Al-Ni-Mo shape memory alloys. The results showed that the formation of γ phase was completely suppressed after 15 °C and 80 °C water quenching as well as air cooling. However, B2 nano-particles were still precipitated after the three cooling processes, and their sizes and misfits increased with decreasing the cooling rates. In addition, the Vickers hardness increased after natural aging for 338 days, which indicated that it is not viable to inhibit the precipitation of B2 nano-particles during natural aging by Mo alloying in the Fe-Mn-Al-Ni shape memory alloys. [ABSTRACT FROM AUTHOR]

A worldwide growing trend is dedicated towards reducing carbon dioxide emissions from mechanical systems in different industries. One key factor under focus of research is to decrease energy losses in rotating machinery during operation by improving lubrication performance. This paper presents a novel grease nano-additive using activated carbon (AC) as a byproduct from recycled polymer waste. Five different concentrations of AC nanoparticles (ACNPs) are added to lithium grease to obtain blends containing 0.025 wt.%, 0.05 wt.%, 0.1 wt.%, 0.5 wt.%, and 1 wt.%. The tribological assessment of blends has been performed using a four-ball wear test and load carrying capacity test. The obtained results for blends are compared to samples of base grease and to blends with 2 wt.% reduced graphene oxide (rGO). Test results showed a remarkable enhancement of load carrying capacity of AC samples by 20–30% as compared to base grease. By observing wear scar in rolling elements, the ACNPs lowered the average wear scar diameter (WSD) for all samples by 30–36%. Base grease samples showed the highest coefficient of friction (COF) values between 0.15 and 0.17. These values are reduced to 0.03 and 0.06 for grease with ACNPs reaching their minimum in the case of 1 wt.% AC. These outcomes are found consistent with the enhancements in driving power saving values. The results proved the competitiveness and suitability of the AC as a recycled waste and nano-additive for improving the tribological performance of grease lubrication. [ABSTRACT FROM AUTHOR]

In this work, a series of novel flower-like Ag@AgCl/Bi2O2CO3 were prepared by simple and feasible oil-in-water self-assembly processes. The phase structures of as-prepared samples were examined by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), X-ray fluorescence spectrometer (XRF), etc. The characterization results indicated that the presence of Ag@AgCl did not affect the crystal structure, but exerted a great influence on the photocatalytic activity of Bi2O2CO3 and enhanced the absorption band of pure Bi2O2CO3. The photocatalytic activities of the Ag@AgCl/Bi2O2CO3 samples were determined by photocatalytic degradation of methylene blue (MB) under visible light irradiation. The Ag@AgCl (10 wt %)/Bi2O2CO3 composite showed the highest photocatalytic activity, degrading 97.9% MB after irradiation for 20 min, which is over 1.64 and 3.66 times faster than that of pure Ag@AgCl (calculated based on the equivalent Ag@AgCl content in Ag@AgCl (10 wt %)/Bi2O2CO3) and pure Bi2O2CO3, respectively. Bisphenol A (BPA) was also degraded to further prove the degradation ability of Ag@AgCl/Bi2O2CO3. Photocurrent studies indicated that the recombination of photo-generated electron-hole pairs was decreased effectively due to the formation of heterojunctions between flower-like Bi2O2CO3 and Ag@AgCl nanoparticles. Trapping experiments indicated that O2-, h+ and Cl° acted as the main reactive species for MB degradation in the present photocatalytic system. Furthermore, the cycling experiments revealed the good stability of Ag@AgCl/Bi2O2CO3 composites. Based on the above, a photocatalytic mechanism for the degradation of organic compounds over Ag@AgCl/Bi2O2CO3 was proposed. [ABSTRACT FROM AUTHOR]

Nano-technology has played a vital role in upgrading the durability and sustainability of asphalt pavements during the last decade. Conventional bitumen does not provide adequate performance against permanent deformation in severe weather conditions. Quartz nano-size particles (QNPs) (1, 3, and 5% by weight of the bitumen) were employed in this research to modify the conventional base bitumen PG 58–16. Conventional physical (penetration, softening, ductility, and flash and fire point), rheological, frequency sweep, high-performance grading, and moisture susceptibility tests were performed to investigate the enhancement of the base bitumen performance. Marshall mix design was conducted on each asphalt mixture to determine the optimum bitumen content (OBC) percentage for the preparation of wheel tracker samples to evaluate the effect of QNPs on asphalt mixtures. Laboratory test findings showed that the optimum concentration of QNPs is 5% by weight of base bitumen. The homogeneity and proper stable dispersion of QNPs in the bitumen were validated via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and storage stability tests. At higher temperatures, the QNP-modified asphalt mixtures exhibited higher stiffness, stripping resistance, and rutting potential. It was concluded that QNPs effectively upgrade durability and permanent deformation resistance at high temperatures and, therefore, the sustainability of asphalt roads. [ABSTRACT FROM AUTHOR]

Nano-hydroxyapatite (n-HA) is the main inorganic component of natural bone, which has been widely used as a reinforcing filler for polymers in bone materials, and it can promote cell adhesion, proliferation, and differentiation. It can also produce interactions between cells and material surfaces through selective protein adsorption and has therefore always been a research hotspot in orthopedic materials. However, n-HA nano-particles are inherently easy to agglomerate and difficult to disperse evenly in the polymer. In addition, there are differences in trace elements between n-HA nano-particles and biological apatite, so the biological activity needs to be improved, and the slow degradation in vivo, which has seriously hindered the application of n-HA in bone fields, is unacceptable. Therefore, the modification of n-HA has been extensively reported in the literature. This article reviewed the physical modification and various chemical modification methods of n-HA in recent years, as well as their modification effects. In particular, various chemical modification methods and their modification effects were reviewed in detail. Finally, a summary and suggestions for the modification of n-HA were proposed, which would provide significant reference for achieving high-performance n-HA in biomedical applications. [ABSTRACT FROM AUTHOR]

A disposable organophosphorus pesticides (OPs) enzyme biosensor based on magnetic composite nanoparticle-modified screen printed carbon electrodes (SPCE) has been developed. Firstly, an acetylcholinesterase (AChE)-coated Fe3O4/Au (GMP) magnetic nanoparticulate (GMP-AChE) was synthesized. Then, GMP-AChE was absorbed on the surface of a SPCE modified by carbon nanotubes (CNTs)/nano-ZrO2/prussian blue (PB)/Nafion (Nf) composite membrane by an external magnetic field. Thus, the biosensor (SPCE∣CNTs/ZrO2/PB/Nf∣GMP-AChE) for OPs was fabricated. The surface of the biosensor was characterized by scanning electron micrography (SEM) and X-ray fluorescence spectrometery (XRFS) and its electrochemical properties were studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The degree of inhibition (A%) of the AChE by OPs was determined by measuring the reduction current of the PB generated by the AChE-catalyzed hydrolysis of acetylthiocholine (ATCh). In pH = 7.5 KNO3 solution, the A was related linearly to the concentration of dimethoate in the range from 1.0 × 10-3-10 ng·mL-1 with a detection limit of 5.6 × 10-4 ng·mL-1. The recovery rates in Chinese cabbage exhibited a range of 88%-105%. The results were consistent with the standard gas chromatography (GC) method. Compared with other enzyme biosensors the proposed biosensor exhibited high sensitivity, good selectivity with disposable, low consumption of sample. In particular its surface can be easily renewed by removal of the magnet. The convenient, fast and sensitive voltammetric measurement opens new opportunities for OPs analysis. [ABSTRACT FROM AUTHOR]

The glucose analog, 2-deoxyglucose (2-DG), specifically inhibits glycolysis of cancer cells and interferes with the growth of cancer cells. However, the excellent water solubility of 2-DG makes it difficult to be concentrated in tumor cells. In this study, a targeted nano-pharmacosome was developed with folic acid-modified 2-DG (FA-2-DG) by using amino ethanol as a cleavable linker. FA-2-DG was able to self-assemble, forming nano-particles with diameters of 10⁻30 nm. The biological effects were evaluated with cell viability assays and flow cytometry analysis. Compared with a physical mixture of folic acid and 2-DG, FA-2-DG clearly reduced cell viability and resulted in cell cycle arrest. A computational study involving docking simulation suggested that FA-2-DG can dock into the same receptor as folic acid, thus confirming that the structural modification did not affect the targeting performance. The results indicated that the nano-pharmacosome consisting of FA-2-DG can be used for targeting in a nano-drug delivery system.

Statement of Problem: Polymethyl methacrylate (PMMA) denture resins commonly fracture as a result of the denture being dropped or when in use due to heavy occlusal forces. Purpose: To investigate the effects of E-glass fibre, ZrO2 and TiO2 nanoparticles at different concentrations on the fracture toughness and impact strength of PMMA denture base. Materials and Methods: To evaluate fracture toughness (dimensions: 40 × 8 × 4 mm3; n = 10/group) and impact strength (dimensions: 80 × 10 × 4 mm3; n = 12/group), 286 rectangular tested specimens were prepared and divided into four groups. Group C consisted of the PMMA specimens without any filler (control group), while the specimens in the remaining three groups varied according to the concentration of three filler materials by weight of PMMA resin: 1.5%, 3%, 5%, and 7%. Three-point bending and Charpy impact tests were conducted to measure the fracture toughness and impact strength respectively. Scanning Electron Microscope (SEM) was utilised to examine the fractured surfaces of the specimens after the fracture toughness test. One-way analysis of variance (ANOVA) followed by Tukey post-hoc tests were employed to analyse the results at a p ≤ 0.05 significance level. Results: Fracture toughness of groups with 1.5 and 3 wt.% ZrO2, 1.5 wt.% TiO2, and all E-glass fibre concentrations were significantly higher (p < 0.05) than the control group. The samples reinforced with 3 wt.% ZrO2 exhibited the highest fracture toughness. Those reinforced with a 3 wt.%, 5 wt.%, and 7 wt.% of E-glass fibres had a significantly (p < 0.05) higher impact strength than the specimens in the control group. The heat-cured PMMA modified with either ZrO2 or TiO2 nanoparticles did not exhibit a statistically significant difference in impact strength (p > 0.05) in comparison to the control group. Conclusions: 1.5 wt.%, 3 wt.% of ZrO2; 1.5 wt.% ratios of TiO2; and 1.5 wt.%, 3 wt.%, 5 wt.%, and 7 wt.% of E-glass fibre can effectively enhance the fracture toughness of PMMA. The inclusion of E-glass fibres does significantly improve impact strength, while ZrO2 or TiO2 nanoparticles did not. [ABSTRACT FROM AUTHOR]

Silica nanoparticles display many unique physicochemical properties that make them desirable for use in a wide variety of consumer products and composite materials. Accurately measuring the size of these nanoparticles is important for achieving the desired nanoscale functionality of the final product and for regulatory compliances. This study covers the validation of a centrifugal liquid sedimentation method for accurate measurement of the Stokes diameter of silica particles with a near-spherical shape and dimensions in the nanometer and sub-nanometer scale range. The validated method provided unbiased results in the range of 50 nm to 200 nm, with a lower limit of detection of ≤20 nm. The relative standard uncertainties for precision, quantified in terms of repeatability and day-to-day variation, ranged from 0.2% to 1.0% and from <0.1% to 0.5%, respectively. The standard uncertainty for trueness was assessed at 4.6%. Within its working range, the method was found robust with respect to the type of cuvette, light factor, operator, and for defining the meniscus of the sample suspension. Finally, a relative expanded measurement uncertainty of 10% confirmed the satisfactory performance of the method. [ABSTRACT FROM AUTHOR]

The present review article provides an overview of the properties of various natural and synthetic fibers for the fabrication of pure natural composites and the combination of both natural/synthetic fibers-based hybrid composites, bio-based resins, various fabrication techniques, chemical and mechanical properties of fibers, the effect of chemical treatment and the influence of nanoparticles on the composite materials. Natural fibers are becoming more popular and attractive to researchers, with satisfactory results, due to their availability, ease of fabrication, cost-effectiveness, biodegradable nature and being environmentally friendly. Hybrid composites made up of two different natural fibers under the same matrix material are more popular than a combination of natural and synthetic fibers. Recent studies relevant to natural fiber hybrid composites have stated that, due to their biodegradability and the strength of individual fibers causing an impact on mechanical properties, flame retardancy and moisture absorption, natural fibers need an additional treatment like chemical treatment for the fibers to overcome those drawbacks and to enhance their better properties. The result of chemical treatment on composite material properties such as thermal, mechanical and moisture properties was studied. Researchers found that the positive influence on overall strength by placing the filler materials (nanoparticles) in the composite materials. Hybrid composites are one of the fields in polymer science that are attracting consideration for various lightweight applications in a wide range of industries such as automobile, construction, shipping, aviation, sports equipment, electronics, hardware and biomedical sectors. [ABSTRACT FROM AUTHOR]

Zinc Oxide is widely used in many industrial sectors, ranging from photocatalysis, rubber, ceramic, medicine, and pigment, to food and cream additive. The global market is estimated to be USD 3600M yearly, with a global production of 10 Mt. In novel applications, size and shape may sensibly increase the efficiency and a new nano-ZnO market is taking the lead (USD 2000M yearly with a capacity of 1 Mt and an expected Compound Annual Growth Rate of 20%/year). The aim of this work was to investigate the possibility of producing zinc oxide nanoparticles by means of a spinning disk reactor (SDR). A lab-scale spinning disk reactor, previously used to produce other nanomaterials such as hydroxyapatite or titania, has been investigated with the aim of producing needle-shaped zinc oxide nanoparticles. At nanoscale and with this shape, the zinc oxide particles exhibit their greatest photoactivity and active area, both increasing the efficiency of photocatalysis and ultraviolet (UV) absorbance. Working at different operating conditions, such as at different disk rotational velocity, inlet distance from the disk center, initial concentration of Zn precursor and base solution, and inlet reagent solution flowrate, in certain conditions, a unimodal size distribution and an average dimension of approximately 56 nm was obtained. The spinning disk reactor permits a continuous production of nanoparticles with a capacity of 57 kg/d, adopting an initial Zn-precursor concentration of 0.5 M and a total inlet flowrate of 1 L/min. Product size appears to be controllable, and a lower average dimension (47 nm), adopting an initial Zn-precursor concentration of 0.02 M and a total inlet flow-rate of 0.1 L/min, can be obtained, scarifying productivity (0.23 kg/d). Ultimately, the spinning disk reactor qualifies as a process-intensified equipment for targeted zinc oxide nanoparticle production in shape in size. [ABSTRACT FROM AUTHOR]

The phenomenon of the oxidation and aging of asphalt binders affects the strength and durability of asphalt mixtures in pavements. Several studies are trying to improve the resistance to this phenomenon by modifying the properties of the binders with nano-particles. One material that shows promise in this field is zinc oxide (ZnO), especially in improving ultraviolet (UV) aging resistance. Few studies have evaluated the effect of these nano-particles on the thermo-oxidative resistance of asphalt binders, and, on hot-mix asphalt (HMA), studies are even more scarce and limited. Therefore, in the present study, the resistance to thermo-oxidative aging of an HMA manufactured with an asphalt binder modified with ZnO was evaluated. An asphalt cement (AC 60–70) was initially modified with 0, 1, 3, 5, 7.5, and 10% ZnO (percentage by weight of asphalt binder; ZnO/AC in wt%), and then exposed to aging in Rolling Thin-Film Oven tests (RTFOT) and a Pressure Aging Vessel (PAV). Penetration, viscosity, and softening point tests were performed on these binders, and aging indices were calculated and evaluated. Samples of HMAs were then manufactured using these binders and designed by the Marshall method, determining the optimum asphalt binder content (OAC) and the optimum ZnO/AC ratio. Control (unmodified) and modified HMA were subjected to short-term oven aging (STOA) and long-term oven aging (LTOA) procedures. Marshall, Indirect Tensile Strength (ITS), and resilient modulus (RM) tests were performed on these mixtures. LTOA/STOA results of the parameters measured in these tests were used as aging indices. In this study, ZnO was shown to increase the thermo-oxidative aging resistance of the asphalt binder and HMA. It also contributed to an increase in the resistance under monotonic loading in the Marshall and ITS tests, and under repeated loading in RM test. Likewise, it contributed to a slightly increasing resistance to moisture damage. The best performance is achieved using ZnO/AC = 5 wt%. [ABSTRACT FROM AUTHOR]

In this work, a set of nanoparticles of Nb2O5 nanoparticles were grown by both the Pechini and the sol-gel methods. The amorphous materials were calcined at 650°C or at 750°C. X-ray diffraction, scanning electron microscopy, luminescence and Raman spectroscopy were used in order to characterize the materials. From the study, it is possible to state that the method of production of nanoparticles, beyond the temperature of synthesis, has a great influence on whether the phase produced is hexagonal or orthorhombic. Additionally, compared to de Sol-gel method, the Pechini method produced samples with smaller particle sizes. The photoluminescence spectra of niobium pentoxide nanostructure materials show that the emission peaks are positioned between 334 to 809 nm and there is a change of intensity which varies depending on the synthesis route used. High pressure Raman spectra at room temperature were obtained from two samples grown by the sol-gel method. Up to 6 GPa, where it is possible to observe the Raman bands, no modification other than the increase of disorder was observed, and this can be associated with a change of phase. [ABSTRACT FROM AUTHOR]

Silicon nano-particles grafted with two different organic oligomers were prepared; the oligomers used were a phenylene-vinylene (PV) oligomer and a 3,3'''-didodecylquaterthiophene. The graftings were performed by the use of two different functional groups, the PV oligomer was grafted by a hydroxyl-group in the form of a phenol and a lithium derivative was used to graft the 3,3'''-didodecylquaterthiophene. The morphology and size of the grafted particles were analyzed by atomic force microscopy (AFM) and the extent of the grafting was analyzed by NMR. Organic photovoltaics with normal geometry (ITO/PEDOT:PSS/active layer/Al) were prepared using these materials as a donor and phenyl-C61-butyric acid methyl ester ([60]PCBM) as the acceptor and yielded a power conversion efficiency (PCE) of 0.27%, an open circuit voltage (VOC) of 0.93 V, a short circuit current density (JSC) of 0.89 mA/cm², and a fill factor (FF) of 32.5% for a lead device with an active area of 0.25 cm&#178. [ABSTRACT FROM AUTHOR]

Magnetic Field Hyperthermia is a technique where tumours are treated through an increase in local temperature upon exposure to alternating magnetic fields (AMFs) that are mediated by magnetic nano-particles (MNPs). In an AMF, these particles heat-up and kill the cells. The relationship between an AMF and the heating-rate is complex, leading to confusion when comparing data for different MNP and AMF conditions. This work allows for the thermal-response to be monitored at multiple AMF amplitudes while keeping other parameters constant. An induction-heating coil was designed based on a Zero-Voltage-Zero-Current (ZVZC) resonant circuit. The coil operates at 93 kHz with a variable DC drive-voltage (12–30 V). NEC4 software was used to model the magnetic field distribution, and MNPs were synthesised by the coprecipitation method. The magnetic field was found to be uniform at the centre of the coil and ranged from 1 kAm−1 to 12 kAm−1, depending on the DC drive-voltage. The MNPs were found to have a specific absorption rate (SAR) of 1.37 Wg−1[Fe] and 6.13 Wg−1[Fe] at 93 kHz and 2.1 kAm−1 and 12.6 kAm−1, respectively. The measured SAR value was found to be directly proportional to the product of the frequency and field-strength (SARα f Ho). This leads to the recommendation that, when comparing data from various groups, the SAR value should be normalized following this relationship and not using the more common relationship based on the square of the field intensity (SARα f Ho2). [ABSTRACT FROM AUTHOR]

In this paper, Nano copper (Cu) particles with a core-shell structure and good spherical shape were prepared by an innovative method called mass-produced nanoparticles (MPNP). The prepared Cu nanoparticles have good dispersibility and are agglomeration-free in Pao oil. In particular, the effects of nano-Cu particles with different mass fractions on the tribological properties of the steel against diamond-like carbon (DLC) coating were studied systematically. The results showed that the nano-Cu particles with the mass fraction of 0.1 wt.% and the steel/DLC friction pairs had good synergistic lubrication. The friction mechanism of the metal nano-particles and carbon-based coatings mainly depends on the physical effects such as nano-bearing and nano-filling of the nano-particles, which has little correlation with the shear film formation of the metal nano-particles. Therein, the surface polish behaviors of the metal nano-particles and carbon-based coatings are the key to bringing the nano-bearing mechanism of nano-particles into full play. Therefore, the Cu nanoparticles prepared by MPNP show excellent tribological performance and possess broad prospects in the fields of lubricant additives. [ABSTRACT FROM AUTHOR]

Selenium is an essential trace element in human nutrition. Recent findings suggest that the biosynthesis of selenium nano particles (SeNPs) in plants might be a ubiquitous phenomenon. We investigated the potential of SeNP biosynthesis in food plants and our core objective was to explore the commonness and possible ubiquitousness of nano selenium in food plants and consequently in the human diet. By growing a variety of plants in controlled conditions and the presence of selenite we found strong evidence that SeNPs are widely present in vegetables. The shoots and roots of seven different plants, and additionally Brazil nuts, were analyzed with single-particle inductively coupled plasma mass spectrometry with a focus on edible plants including herbs and salads. SeNPs were found in every plant of our study, hence we conclude, that SeNPs are common ingredients in plant-based food and are therefore eaten daily by most humans. Considering the concerning worldwide prevalence of selenium deficiency and the great physiological properties of SeNPs, we see a high potential in utilizing this discovery. [ABSTRACT FROM AUTHOR]

Using of nano-inclusion to reinforce polymeric materials has emerged as a potential technique to achieve an upper extreme of specific strength. Despite the significant improvement of mechanical properties via nano-reinforcements, the commercial application of such nano-composites is still restricted, due to high cost and unwanted aggregation of nanoparticles in the polymer matrix. To address these issues, here we proposed a scalable and economical synthesis of TiO2 at low temperatures, resulting in self-dispersed nanoparticles, without any surfactant. As lower energy is consumed in the synthesis and processing of such nanoparticles, so their facile gram-scale synthesis is possible. The defect-rich surface of such nanoparticles accommodates excessive dangling bonds, serving as a center for the functional groups on the surface. Functional surface enables high dispersion stability of room temperature synthesized TiO2 particles. With this motivation, we optimized the processing conditions and concentration of as-synthesized nano-particles for better mechanical properties of unsaturated polyester (UP) resin. The composite structure (UP-TiO2) showed nearly two folds higher tensile, flexural, and impact strength, with 4% content of nanoparticles. Characterization tools show that these better mechanical properties are attributed to a strong interface and superior dispersion of nanoparticles, which facilitate better stress distribution in the composite structure. In addition, the crack generation and propagation are restricted at a much smaller scale in nanocomposites, therefore significant improvement in mechanical properties was observed. [ABSTRACT FROM AUTHOR]

Sepsis is a life-threatening organ dysfunction caused by a dysregulated host response to infection. The fast and accurate diagnosis of sepsis by procalcitonin (PCT) has emerged as an essential tool in clinical medicine. Although in use in the clinical laboratory for a long time, PCT quantification has not yet been standardized. The International Federation of Clinical Chemistry working group on the standardization of PCT (IFCC-WG PCT) aims to provide an LC-MS/MS-based reference method as well as the highest metrological order reference material to address this diagnostic need. Here, we present the systematic evaluation of the efficiency of an immuno-enrichment method, based on functionalized Sepharose, magnetic-core, or polystyrene (latex) nano-particles, to quantitatively precipitate PCT from different human sample materials. This method may be utilized for both mass spectrometric and proteomic purposes. In summary, only magnetic-core nano-particles functionalized by polyclonal PCT antibodies can fulfil the necessary requirements of the international standardization of PCT. An optimized method proved significant benefits in quantitative and specific precipitation as well as in the subsequent LC-MS/MS detection of PCT in human serum samples or HeLa cell extract. Based on this finding, further attempts of the PCT standardization process will utilize a magnetic core-derived immuno-enrichment step, combined with subsequent quantitative LC-MS/MS detection.

We present a thorough structural characterization of Graphene Nano Particles (GNPs) prepared by means of physical procedures, i.e., ball milling and ultra-sonication of high-purity synthetic graphite. UV-vis absorption/extinction spectroscopy, Dynamic Light Scattering, Transmission Electron Microscopy, IR and Raman spectroscopies were performed. Particles with small size were obtained, with an average lateral size = 70−120 nm, formed by few = 1−10 stacked layers, and with a small number of carboxylic groups on the edges. GNPs relatively more functionalized were separated by centrifugation, which formed stable water dispersions without the need for any surfactant. A critical reading and unified interpretation of a wide set of spectroscopic data was provided, which demonstrated the potential of Specular Reflectance Infrared Spectroscopy for the diagnosis and quantification of chemical functionalization of GNPs. Raman parameters commonly adopted for the characterization of graphitic materials do not always follow a monotonic trend, e.g., with the particle size and shape, thus unveiling some limitations of the available spectroscopic metrics. This issue was overcome thanks to a comparative spectra analysis, including spectra deconvolution by means of curve fitting procedures, experiments on reference materials and the exploitation of complementary characterization techniques.

In the current study, the combined anti-tumor efficacy of bioactive hydroxyapatite nano- particles (HA-NPs) loaded with altretamine (ALT) was evaluated. The well-known fact that HA has great biological compatibility was confirmed through the findings of the hemolytic experiments and a maximum IC50 value seen in the MTT testing. The preparation of HA-NPs was performed using the chemical precipitation process. An in vitro release investigation was conducted, and the results demonstrated the sustained drug release of the altretamine-loaded hydroxyapatite nanoparticles (ALT-HA-NPs). Studies using the JURKAT E6.1 cell lines MTT assay, and cell uptake, as well as in vivo pharmacokinetic tests using Wistar rats demonstrated that the ALT-HA-NPs were easily absorbed by the cells. A putative synergism between the action of the Ca2+ ions and the anticancer drug obtained from the carrier was indicated by the fact that the ALT-HA-NPs displayed cytotoxicity comparable to the free ALT at 1/10th of the ALT concentration. It has been suggested that a rise in intracellular Ca2+ ions causes cells to undergo apoptosis. Ehrlich's ascites model in Balb/c mice showed comparable synergistic efficacy in a tumor regression trial. While the ALT-HA-NPs were able to shrink the tumor size by six times, the free ALT was only able to reduce the tumor volume by half. [ABSTRACT FROM AUTHOR]

Agriculture crop development and production may be hampered in the modern era because of the increasing prevalence of ecological problems around the world. In the last few centuries, plant and agrarian scientific experts have shown significant progress in promoting efficient and eco-friendly approaches for the green synthesis of nanoparticles (NPs), which are noteworthy due to their unique physio-biochemical features as well as their possible role and applications. They are thought to be powerful sensing molecules that regulate a wide range of significant physiological and biochemical processes in plants, from germination to senescence, as well as unique strategies for coping with changing environmental circumstances. This review highlights current knowledge on the plant extract-mediated synthesis of NPs, as well as their significance in reprogramming plant traits and ameliorating abiotic stresses. Nano particles-mediated modulation of phytohormone content in response to abiotic stress is also displayed. Additionally, the applications and limitations of green synthesized NPs in various scientific regimes have also been highlighted.

One of the fabrication methods for functionally graded materials (FGMs) is a centrifugal solid-particle method, which is an application of the centrifugal casting technique. However, it is the difficult to fabricate FGMs containing nano-particles by the centrifugal solid-particle method. Recently, we proposed a novel fabrication method, which we have named the centrifugal mixed-powder method, by which we can obtain FGMs containing nano-particles. Using this processing method, Cu-based FGMs containing SiC particles and Al-based FGMs containing TiO2 nano-particles on their surfaces have been fabricated. In this article, the microstructure and mechanical property of Cu/SiC and Al/TiO2 FGMs, fabricated by the centrifugal mixed-powder method are reviewed. [ABSTRACT FROM AUTHOR]

Chitosan/alginate nanoparticles (DG1-NPs and DG1/Cur-NPs) aiming to enhance the oral antithrombotic activity of clam heparinoid DG1 were prepared by ionotropic pre-gelation. The influence of parameters, such as the concentration of sodium alginate (SA), chitosan (CTS), CaCl 2 , clam heparinoid DG1, and curcumin (Cur), on the characteristics of the nanoparticles, were investigated. Results indicate that chitosan and alginate can be used as polymer matrices to encapsulate DG1, and nanoparticle characteristics depend on the preparation parameters. Nano-particles should be prepared using 0.6 mg/mL SA, 0.33 mg/mL CaCl 2 , 0.6 mg/mL CTS, 7.2 mg/mL DG1, and 0.24 mg/mL Cur under vigorous stirring to produce DG1-NPS and DG1/Cur-NPS with small size, high encapsulation efficiency, high loading capacity, and negative zeta potential from approximately -20 to 30 mV. Data from scanning electron microscopy, Fourier-transform infrared spectrometry, and differential scanning calorimetry analyses showed no chemical reaction between DG1, Cur, and the polymers; only physical mixing. Moreover, the drug was loaded in the amorphous phase within the nanoparticle matrix. In the acute pulmonary embolism murine model, DG1-NPs enhanced the oral antithrombotic activity of DG1, but DG1/Cur-NPs did not exhibit higher antithrombotic activity than DG1-NPs. Therefore, the chitosan/alginate nanoparticles enhanced the oral antithrombotic activity of DG1, but curcumin did not further enhance this effect.

This study aims at the characterisation of red and orange glass tesserae from the 4th-century Roman villa of Noheda (Spain). Due to the limited number of analyses available for such ancient materials, many questions remain unanswered about the production processes in the Roman period. Six samples were chosen for their hue variations, including two samples showing banded patterns of red and orange. Differences in copper speciation were investigated by X-ray absorption spectroscopy and compared with colour and compositional variations obtained by EPMA. The shapes and sizes of colouring crystals could be investigated using scanning and transmission electron microscope imaging. The brown-red colour is due to metallic copper nano-particles and corresponds to a low-copper and low-lead group usually described in the literature. The orange samples and bands are coloured by copper oxide C u 2 O nanoparticles with remaining Cu+ in the glass and have greater contents of Cu. Compositional analyses reveal that the same base glass is used in the red and orange bands with additions of Cu, Sn, Pb and probable Fe. Furthermore, based on our results and on the literature review, a high-copper low-lead group of glasses highlights the variability of compositions observed in cuprite colours. [ABSTRACT FROM AUTHOR]

Some of the most significant medical achievements in recent history are the development of distinct and effective vaccines, and the improvement of the efficacy of previously existing ones, which have contributed to the eradication of many dangerous and life-threatening diseases. Immunization depends on the generation of a physiological memory response and protection against infection. It is therefore crucial that antigens are delivered in an efficient manner, to elicit a robust immune response. The recent approval of COVID-19 vaccines containing lipid nanoparticles encapsulating mRNA demonstrates the broad potential of lipid-based delivery systems. In light of this, the present review article summarizes currently synthesized lipid-based nanoparticles such as liposomes, lipid-nano particles, or cell-derived exosomes. [ABSTRACT FROM AUTHOR]

For large-scale and sustainable water electrolysis, it is of great significance to develop cheap and efficient electrocatalysts that can replace platinum. Currently, it is difficult for most catalysts to combine high activity and stability. To solve this problem, we use cobalt to regulate the electronic structure of ruthenium to achieve high activity, and use carbon matrix to protect alloy nanoparticles to achieve high stability. Herein, based on the zeolitic imidazolate frameworks (ZIFs), a novel hybrid composed of RuCo alloy nano-particles and N-doped carbon was prepared via a facile pyrolysis-displacement-sintering strategy. Due to the unique porous structure and multi-component synergy, the optimal RuCo500@NC750 material in both acidic and alkaline media exhibited eminent HER catalytic activity. Notably, the 3-RuCo500@NC750 obtained a current density of 10 mA cm−2 at 22 mV and 31 mV in 0.5 M H2SO4 and 1.0 M KOH, respectively, comparable to that of the reference Pt/C catalyst. Furthermore, the Tafel slopes of the catalyst are 52 mV Dec−1 and 47 mV Dec−1, respectively, under acid and alkali conditions, and the catalyst has good stability, indicating that it has broad application prospects in practical electrolytic systems. This work contributes to understanding the role of carbon-supported polymetallic alloy in the electrocatalytic hydrogen evolution process, and provides some inspiration for the development of a high efficiency hydrogen evolution catalyst. [ABSTRACT FROM AUTHOR]

Nanomaterials are widely utilized as sensing materials in semiconductor gas sensors. As sensor sizes continue to shrink, it becomes increasingly challenging to construct micro-scale sensing materials on a micro-sensor with good uniformity and stability. Therefore, in-situ growth with a desired pattern in the tiny sensing area of a microsensor is highly demanded. In this work, we combine area-selective seed layer formation and hydrothermal growth for the in-situ growth of ZnO nanowires (NWs) on Micro-electromechanical Systems (MEMS)-based micro-hotplate gas sensors. The results show that the ZnO NWs are densely grown in the sensing area. With Pd nano-particles' modification of the ZnO NWs, the sensor is used for hydrogen (H2) detection. The sensors with Pd-ZnO NWs show good repeatability as well as a reversible and uniform response to 2.5 ppm–200 ppm H2. Our approach offers a technical route for designing various kinds of gas sensors. [ABSTRACT FROM AUTHOR]

Biomineralization consists of a complex cascade of phenomena generating hybrid nanostructured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce highly biomimetic and biocompatible materials resembling natural hard tissues such as bones and teeth. In detail, biomimetic materials, composed of hydroxyapatite nanoparticles (HA) nucleated on an organic matrix, show extremely versatile chemical compositions and physical properties, which can be controlled to address specific challenges. Indeed, different parameters, including (i) the partial substitution of mimetic doping ions within the HA lattice, (ii) the use of different organic matrices, and (iii) the choice of cross-linking processes, can be finely tuned. In the present review, we mainly focused on calcium biomineralization. Besides regenerative medicine, these multifunctional materials have been largely exploited for other applications including 3D printable materials and in vitro three-dimensional (3D) models for cancer studies and for drug testing. Additionally, biomineralized multifunctional nano-particles can be involved in applications ranging from nanomedicine as fully bioresorbable drug delivery systems to the development of innovative and eco-sustainable UV physical filters for skin protection from solar radiations. [ABSTRACT FROM AUTHOR]

In arterial thrombosis, von Willebrand factor (VWF) bridges platelets to sites of vascular injury. The adhesive properties of VWF are controlled by its different domains, which may be engineered into ligands for targeting nanoparticles to vascular injuries. Here, we functionalized 200 nm polystyrene nanoparticles with the VWF-A1 domain and studied their spatial adhesion to collagen or collagen-VWF coated, real-sized coronary stenosis models under physiological flow. When VWF-A1 nano-particles (A1-NPs) were perfused through a 75% stenosis model coated with collagen-VWF, the particles preferentially adhered at the post stenotic region relative to the pre-stenosis region while much less adhesion was detected at the stenosis neck (~ 65-fold less). When infused through collagen-coated models or when the A1 coating density of nanoparticles was reduced by 100-fold, the enhanced adhesion at the post-stenotic site was abolished. In a 60% stenosis model, the adhesion of A1-NPs to collagen-VWF-coated models depended on the location examined within the stenosis. Altogether, our results indicate that VWF-A1 NPs exhibit a flow-structure dependent adhesion to VWF and illustrate the important role of studying cardiovascular nano-medicines in settings that closely model the size, geometry, and hemodynamics of pathological environments.