Search

This study investigates the UV degradation of black Chinese lacquer by incorporating carbon black and ferrous hydroxide as additives. The purpose of this research is to understand the effects of these additives on the degradation behavior of the lacquer film. Different concentrations of carbon black powder (1%, 3%, and 5%) and Fe(OH)2 (10%, 20%, and 30%) were added to the lacquer following traditional techniques. The main methods employed for analysis were gloss loss measurement, color change assessment, SEM imaging, FTIR spectroscopy, and XPS analysis. The results demonstrate a significant decrease in gloss levels and an increase in lightness values with increasing ultraviolet exposure time. SEM images reveal the formation of cracks in the lacquer film. FTIR analysis indicates oxidation of the urushiol side chain and an increase in oxidation products. The infrared difference spectrum highlights the differences between the additives, with Fe(OH)2 showing a lower impact on the spectra compared to carbon black. XPS analysis confirms the oxidation of the C-H functional group and the presence of C-O-C and C-OH groups. In conclusion, this study sheds light on the influence of carbon black and ferrous hydroxide additives on the UV degradation of black Chinese lacquer and suggests the protective effect of Fe(OH)2 against UV aging. These findings contribute to a better understanding of the degradation mechanisms and provide insights for improving the UV resistance of Chinese lacquer coatings. Further research can explore alternative additives and optimization strategies to mitigate UV-induced degradation. [ABSTRACT FROM AUTHOR]

Luoyang No.1 is a Qing Dynasty (1644–1902) inland river ancient wooden shipwreck discovered in September 2013. It adds significantly to the study of Grand Canal transport history and Luoyang's economic history. The wood characteristics of Luoyang No.1 were investigated in this study using chemical compositions, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nano-indentation (NI), and scanning electron microscopy (SEM). The results showed that the holocellulose content was only 32.84–37.69%, indicating that the cellulose and hemicellulose had been seriously degraded. Based on the XRD pattern, the degree of crystallinity of cellulose in wood ranged from 19.82 to 22.83%. The nano-indentation demonstrated that compared with the undegraded contemporary wood, the elastic modulus and hardness of the ancient ship wood decreased by 45.5% and 32.1%, respectively. Furthermore, the FTIR spectra revealed that the biological deterioration of ancient wood was indicated by a decrease in the peaks related to cellulose and hemicellulose, but the change in lignin was insignificant. The results could provide knowledge for appropriate dewatering, strengthening, restoration strategies and regulation of the museum environment. [ABSTRACT FROM AUTHOR]

Huaguangjiao I refers to the ancient Chinese wooden shipwreck of the South Song Dynasty (1127–1279 AD) discovered in the South China Sea in 1996. From 2008 to 2017, the archaeological waterlogged wood was desalted using deionized water combined with ultrasonic treatment, and desalted using EDTA-2Na, EDTAHO, and NaH2PO4·2H2O solutions. In this paper, the degree of degradation of the modified waterlogged archaeological wood and the moisture and content of the main components were determined. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nanoindentation (NI), and scanning electron microscopy (SEM) were employed to investigate the state of wood degradation after desalination and desulfurization. The results showed that the water content of the wood was as high as 532~1149%, while the basic density was only 0.14~0.18 g/cm3, indicating that the wood had been seriously degraded. The holocellulose content was only 36–40%. Based on the XRD patterns, the degree of cellulose crystallinity in the modified wood was 14.08%. The elastic modulus and hardness of the ancient shipwreck wood after desalination and desulfurization were 1.28–4.31 and 0.10–0.28 GPa, respectively, according to nanoindentation. In addition, the FTIR spectra revealed that the biological deterioration of the modified wood caused cellulose and hemicellulose degradation, but no apparent lignin alteration occurred. The results could provide knowledge for appropriate dewatering, strengthening, and restoration strategies. [ABSTRACT FROM AUTHOR]

In this study, wood samples extracted from the Taicang ancient ship, dating back to the Yuan Dynasty, were investigated to study the characteristics of waterlogged archaeological wood. The macroscopic characteristics and microscopic structures were used to identify the wood species. To assess the degree of degradation of the waterlogged archaeological wood, X-ray diffraction (XRD), nanoindentation (NI), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were used to compare the new and ancient wood samples from the same species. The microscopic structures of the samples were identified as Pinus massoniana. The XRD and nanoindentation results revealed that the crystallinity index of the cellulose decreased from 41.07% to 33.85%, the elastic modulus was reduced by 20.90%, and hardness was reduced by 55.6% compared with the new wood. The FTIR spectra revealed that biological deterioration occurred in the cellulose and hemicellulose, but there was no noticeable change in the lignin content. These results provide helpful information for the conservation and restoration of ancient ships. [ABSTRACT FROM AUTHOR]

The ageing of materials is an irreversible, in-time occurring complex phenomenon, which affects both wood surfaces and the coating materials. This paper focuses on the light-induced natural ageing of wood-coated surfaces in indoor conditions. Two wood species: European maple (Acer pseudoplatanus) and European walnut (Juglans regia) and two types of waxes: bees wax and Chinese wax were employed in the experiments presented in this paper. Uncoated and coated wood samples were exposed to the natural sunlight filtered by window glass in a simulated indoors natural ageing test for a total period of 7 years. Colour measurements in the CIE-Lab system and FTIR-ATR investigation were employed to evaluate the ageing phenomena. The uncoated wooden samples underwent progressive colour changes perceived as darkening for European maple and lightening for European walnut, corresponding to total colour differences values (ΔE) after 7 years of exposure of 12.54 and 11.66, respectively. Coating of wood samples with the two types of waxes differently influenced the total colour changes for the two wood species: reduced colour changes corresponding to ΔE values of 4.79–6.44 were determined for European maple, whilst increased colour changes corresponding to ΔE values of 13.80–20.83 were determined for European walnut. FTIR analysis highlighted different surface chemistry changes for the uncoated and wax-coated wood samples. [ABSTRACT FROM AUTHOR]