Search

The world is facing many challenges to keep up with growing energy demand and greenhouse gas and pollutant emissions. A possible solution is to integrate renewable energy sources (RESs) into residences and create energy management systems (EMSs) that reduce consumption and relieve the main grid in critical hours. This paper is focused on analyzing different EMSs using solar photovoltaic (PV) modules and three energy storage systems (ESSs) to increase savings without affecting the user's needs, with thirty-three power consumption profiles and three energy tariffs over a 25-year investment to compare which solution presents the best economic result in each of the 297 analyzed scenarios. The results show that the higher the overall daily consumption values, the greater the profits for all EMSs. The lowest demand profiles lead to the best self-consumption and self-sufficiency results. PV-only systems with a tri-hourly tariff have the best overall results. In the case of battery operation, each case should be carefully analyzed in order to choose the correct technologies and tariff. The results also allowed us to verify that even though having more PV modules generates more energy, it can make a project less economically desirable. [ABSTRACT FROM AUTHOR]

The adoption of smart grids is becoming a common reality worldwide. This new reality is starting to impact energy customers as they face a dynamic grid in which they can actively participate. However, if energy customers are not prepared to participate actively, they can have their energy costs increased. This paper provides a review of acceptance models and customer surveys around the world made to assess the customers' perception and willingness to participate in smart grids. Contributing to this assessment, this paper presents a survey undertaken in Portugal. The survey results demonstrate a willingness, from the customer's end, to actively participate in smart grid initiatives. It was found that 92.9% of participants are willing to plan their energy usage to face hourly energy prices and that 95.0% of participants are willing to accept an external control of at least one appliance, enabling direct load control demand response programs. Also, the results identified two cognitive tendencies, negativity bias, and loss aversion, which can impact how customers participate in smart grids. These cognitive tendencies and the literature acceptance models demonstrate the importance of conducting social science studies targeting smart grids to fully achieve the efficient participation of end customers. [ABSTRACT FROM AUTHOR]

Custom-built solutions for ageing, urban regeneration, energy efficiency, thermal performance, and well-being are contemporary challenges that have prompted considerable research over the past decades. In the construction field, subjects such as energy efficiency and thermal performance are often addressed within the scope of mandatory regulations, the suitability of construction solutions and the incorporation of technical equipment. Considering four residential structures for older adults under construction in Portugal, this paper aims to highlight the importance of a comprehensive approach to these issues, including architectural quality as the main target. In pursuit of this, a cohesive set of intervention principles guided the analysis: the adaptive reuse of raw materials; taking advantage of the site's conditions; vegetation (type and location); construction options and durability; solar exposure and shading; the pedagogy of building use; and the comfort and thermal perception. Several reflections emerge from the analysis: good architectural design must consider dynamic models incorporating each context and the site's conditions; the culture of use and maintenance and the notion of "adaptive comfort" are primary factors to enhance thermal performance and energy efficiency; and each building is a unique result of a complex negotiation process. Bridging research through practice, and multidisciplinary scientific integration enable engagement with reality and raise awareness of the constraints and challenges to innovation in LTC design. [ABSTRACT FROM AUTHOR]

Hydrogen is a promising commodity, a renewable secondary energy source, and feedstock alike, to meet greenhouse gas emissions targets and promote economic decarbonization. A common goal pursued by many countries, the hydrogen economy receives a blending of public and private capital. After European Green Deal, state members created national policies focused on green hydrogen. This paper presents a study of energy transition considering green hydrogen production to identify Portugal's current state and prospects. The analysis uses energy generation data, hydrogen production aspects, CO 2 emissions indicators and based costs. A comprehensive simulation estimates the total production of green hydrogen related to the ratio of renewable generation in two different scenarios. Then a comparison between EGP goals and Portugal's transport and energy generation prospects is made. Portugal has an essential renewable energy matrix that supports green hydrogen production and allows for meeting European green hydrogen 2030–2050 goals. Results suggest that promoting the conversion of buses and trucks into H 2 -based fuel is better for CO 2 reduction. On the other hand, given energy security, thermoelectric plants fueled by H 2 are the best option. The aggressive scenario implies at least 5% more costs than the moderate scenario, considering economic aspects. [ABSTRACT FROM AUTHOR]

Among all the activities in a society, construction has a key role in environmental, social, and economic pillars. Construction is also responsible for a considerable amount of waste production, energy consumption, pollutant gas emissions, and consumption of nonrenewable natural resources. Regarding energy consumption, a high demand for building operational energy has been observed in the last decades due to the more demanding requirements of the users with a continuous search for better thermal comfort in their homes, namely in developed countries. In Portugal, for instance, more than 20% of the electricity consumed is related to residential buildings, which is based on CO2 emissions and other pollutants that negatively affect the environment. Much of this consumed energy is a result of the HVAC systems installed inside buildings to provide users with thermal comfort. One exciting opportunity to mitigate buildings' operational energy consumption while contributing to thermal user comfort is the use of passive solutions. Even though several passive options are available and constantly under research, their use is still considered limited. This paper overviews and highlights the potential of energy-efficiency passive strategies, namely for Mediterranean-climate countries, where passive solar technologies can be set as a viable solution, as this climate is mainly known for its solar availability (solar hours and solar irradiance). A comprehensive overview of innovative and traditional housing passive solutions currently available is presented and discusses the main advantages, disadvantages, and concerns contributing to the optimal use of climatic conditions and natural resources in those regions. [ABSTRACT FROM AUTHOR]

This paper presents and discusses the application of a novel energy balance scheme for assessing energy efficiency in wastewater systems. The energy balance is demonstrated with a Portuguese real-life case study, using mathematical modelling to estimate the different energy components and to compute two energy efficiency indices. The total inflow intrinsic energy can represent a significant amount (>95%) of the total energy used in systems mainly composed of gravity sewers. The total input energy is significantly (four-times) higher in the wet season than in the dry season, mostly due to undue inflows (e.g., direct rainfall and infiltration). The potential for energy recovery strongly depends on the available head and flow rate at the delivery point, being 0.01 kWh/m3 in the current case, with a project payback period of 4 years. The energy balance components and the respective energy efficiency indices strongly depend on the considered reference elevation. Thus, a unique regional reference elevation is recommended in the calculations. [ABSTRACT FROM AUTHOR]

A sustainable use of active heating, ventilation, and air conditioning (HVAC) systems is crucial for minimum energy consumption. Currently, research studies are increasingly applying adaptive setpoint temperatures, thus reducing considerably the energy consumption without influencing comfort levels excessively. Most of them, however, are focused on the limit values of adaptive comfort standards without considering the tolerance in users' adaptation capacity. This research study analyzed various tolerance ranges in the recent adaptive thermal comfort model from EN 16798-1:2019 used in setpoint temperatures. The study focused on the south of Europe, considering 47 cities in Spain, 18 cities in Portugal, 13 cities in Greece, and 20 cities in Italy. In addition, such cities were analyzed in three climate scenarios: present time, 2050, and 2100. The results showed that values prefixed by EN 16798-1:2019 for new buildings (tolerance of 0.00 °C) produced significant savings with respect to the static model and that each progressive improvement in users' thermal expectations in 0.25 °C increased the energy consumption between 6.57 and 9.31% in all scenarios analyzed. Even applying a thermal tolerance of 1.50 °C, energy savings are currently produced with respect to the static model. This tendency increases in future scenarios until a thermal tolerance of 1.75 °C. The results of this paper provide greater knowledge about the possible energy increase that the improvement in users' expectations would produce. [ABSTRACT FROM AUTHOR]

The benefits of energy efficiency are recognized in multiple socio-economic spheres. Still, the quantitative impact on macroeconomic performance is not fully understood, as modeling tools are not thermodynamically consistent—failing to explicitly include the useful stage of energy flows and/or thermodynamic efficiencies in primary–final–useful energy transformations. Misspecification in the link between energy use and the economy underplays the role of energy use and efficiency in economic growth. In this work, we develop and implement the Macroeconometric Resource Consumption model for Portugal (MARCO-PT), 1960–2014. Based on the post-Keynesian framework developed for the United Kingdom (MARCO-UK), our model explicitly includes thermodynamic energy efficiency, extending the analysis to the useful stage of energy flows. The model's stochastic equations are econometrically estimated. The historical influence of key variables—namely thermodynamic energy efficiency—on economic output is assessed through counterfactual simulations and computation of year-by-year output elasticities. The MARCO-PT model adequately describes the historical behavior of endogenous variables. Although its influence has decreased over time, thermodynamic efficiency has consistently been the major contributor to economic growth between 1960–2014, with an average output elasticity of 0.46. Total useful exergy is also a major contributing factor, with an average output elasticity of 0.29. Both have a higher influence than capital, labor, or other energy variables (final energy, prices). An adequate integration of thermodynamic efficiency is thus crucial for macroeconomic models. [ABSTRACT FROM AUTHOR]

This study provides an in-depth assessment of the environmental performance of five public schools in the transition towards a low-carbon economy and a more sustainable model of society. Life cycle assessment (LCA) methodology is used to conduct the study. The school system includes several activities and processes clustered in three subsystems: management of the school building, training and learning activities (T&L) and mobility and transport (M&T). A detailed primary data inventory of energy and resources consumption was collected in five schools located in Spain and Portugal. Findings on climate change (CC), water depletion (WD), particular matter (PM), acidification (Ac), and human health (HH), as well as associated external cost (EC), are reported per student in one school year as reference unit, allowing the schools' individual performance comparison and identify the potential improvements. Considering the sample of schools, findings reveal that peculiarities of the schools, such as location, specialization, and level of education, are crucial for the environmental performance. Buildings are a relevant contributor to CC as well as heating and electricity needs, although their relevance is dependent on multiple factors. The M&T subsystem also has relevant weight on the metrics evaluated. Educational activities have a lower impact in absolute terms but, in some schools, it becomes the main contributor to HH due to paper and electricity consumption and manufacturing of equipment. External costs results are in the range of 11 to 38 EUR/student·year mainly caused by heating, electricity and wastes from the building subsystem, and the M&T subsystem. [ABSTRACT FROM AUTHOR]

Addressing Europe's decarbonisation challenge involves widespread deployment of nearly zero-energy buildings, deep energy renovations and renewable energy integration in the building sector. Enhancing energy efficiency in public buildings necessitates tailored solutions and strategic planning involving Local Public Administration. This work focuses on advancing insights into the application of the PrioritEE Decision Support Tool in Portuguese public buildings, highlighting the energy and financial savings and carbon dioxide emission reduction potential. Using detailed building characterisation data from energy performance certificates, we applied the tool across 22 public buildings of diverse typologies in three distinct regions of Portugal, representing various public entities. Results demonstrate the tool's adaptability, enabling a comprehensive assessment of energy performance and facilitating the exploration of customised energy efficiency and renewable energy solutions. The research emphasises the critical role of user-friendly tools in aiding policymakers and local administration technicians in meeting national renovation targets and contributing to the broader energy transition objectives. [ABSTRACT FROM AUTHOR]

The most recent sustainability policies of each region of the world conjointly define that economic activities shall follow the principles of natural resource use minimisation, as well as eco-efficiency and circular economy promotion, in addition to the specific objectives defined in each policy. Most recently, a group of researchers has proposed innovative conceptual systems designated Water and Energy Integration Systems (WEIS) for issues related to water and energy use (two prominent categories of natural resources). These are based on engineering projects encompassing a multitude of processes and technologies. In this work, an assessment based on the determination of several sustainability and strategic-aims-related indicators is performed for two WEIS case studies set in the Portuguese process industry (in this case, a ceramic plant). Such an assessment serves as an expansion of previously performed studies on the economic and environmental viability associated with the installation of this type of system with the ultimate goal of proving the effective compliance of water- and energy-use-reduction-related results with sustainability and strategic aims (namely, the ones associated with the most recent policies and aspects associated with the social, economic, and environmental pillars of sustainability). The results for the overall assessment proved that the conceptualised WEIS are robust in terms of eco-efficiency, circular economy potential, and strategic objective achievement potential (with a 6.46% and 4.00% improvement for the aggregated eco-efficiency indicator having been obtained for, respectively, case studies 1 and 2, a null water discharge for both case studies, and a level of 8.58% and 6.69% of recirculated heat over total energy consumption, respectively). The obtained results prove the sustainability promotion effectiveness of the WEIS as conceptual systems. The overall set of indicators defined in this work are part of a methodology that may be used and adapted for further studies considering the innovative WEIS approach, with the specific results obtained in this work presented with the aim of their being used for comparison. [ABSTRACT FROM AUTHOR]

Rural farms constitute a vital component of a country's agricultural landscape, traditionally reliant on energy installations known for their reliability yet notorious for their energy-intensive and inefficient characteristics. While the smart farm concept, integrating renewable energy sources and resource management technologies, has seen widespread adoption in domestic and industrial sectors, rural farms have been slower to embrace these innovations. This study presents a groundbreaking solution, deployed on a rural farm in Portugal, resulting in an impressive 83.24% reduction in energy consumption sourced from the grid. Notably, this achievement translates to a substantial reduction in CO2 emissions, aligning with the growing need for environmentally sustainable farming practices. The technical intricacies of this pioneering solution are comprehensively described and juxtaposed with other scientific case studies, offering valuable insights for replication. This initiative represents a vital first step towards the integration or combination of conventional farming with photovoltaic energy production, exemplified by agrivoltaic systems. In conclusion, this research showcases the potential for rural farms to significantly enhance energy efficiency and financial viability, thereby contributing to a more sustainable and cost-effective agricultural sector. These findings serve as a model for similar endeavors, paving the way for a greener and more economically viable future for rural farming practices. [ABSTRACT FROM AUTHOR]

Current buildings are responsible for the highest energy consumption, exceeding polluting sectors such as industry and transports. In Portugal, a large part of the building stock was built in the 1970s and 1980s, but buildings dated from the 1960s and 1970s are the ones with the most anomalies and worst quality of construction and, therefore, worst energy performance. The renovation of those buildings can represent an excellent opportunity to correct and improve their energy deficiency and, with that, to promote a more sustainable building stock. The ETICS system is the most used for the renovation of buildings in Portugal due to its lower cost, quick application and thermal efficiency, but it doesn't solve other problems that may exist, such as structural safety and interior organization of the existing building. The application of prefabricated systems in the envelope has proved to be successful in improving energy efficiency, allowing new volumes and extra areas while contributing to the structural resilience of existing buildings. This paper aims to describe the current situation of the buildings renovation in Portugal and to discuss the potential of innovative envelope retrofitting solutions, using natural materials like timber, and is more concerned with the problems of existing buildings and the need for comfort and space for the occupants. [ABSTRACT FROM AUTHOR]

The need for reducing fossil fuel consumption and greenhouse gas (GHG) emissions in internal combustion engines has raised the opportunity for the use of renewable energy sources. For the progressive replacement of fossil fuels like diesel, those derived from the sustainable management of forest resources may be a good option. In Portugal, pine trees (pinus pinaster) are among the most widely cultivated tree species. Turpentine can be extracted from their sap without harming the tree. Turpentine is known to be a good fuel with a lower viscosity than regular diesel but with a comparable caloric value, boiling point and ignition characteristics, although it is not widely used as a compression ignition fuel. Moreover, recent research has highlighted the possibility of substantially increasing the turpentine yield through biotechnology, bringing it closer to economic viability. The present study investigates the performance, pollutant emissions and fuel consumption of a 1.6 L four-cylinder direct-injection diesel engine operating with several blends of commercial diesel fuel and turpentine obtained from pine trees. The aim of this study was to assess whether it would be possible to maintain or even improve the performance, fuel consumption and GHG and pollutant emissions (HC, NOx, CO and PM) of the engine with the partial incorporation of this biofuel. Turpentine blends of up to 30% in substitution of regular diesel fuel were tested. The main novelties of the present work are related to (i) the careful testing of a still-insufficiently studied fuel that could gain economical attractiveness with the recent developments in yield improvement through biotechnology and (ii) the tests conducted under fixed engine load positions typical of road and highway conditions. The addition of this biofuel only slightly impacted the engine performance parameters. However, a slightly positive effect was observed in terms of torque, with an increase of up to 7.9% at low load for the 15T85D mixture and 6.8% at high load being observed. Power registered an increase of 9% for the 15T85D mixture at low speed and an increase of 5% for the 30T70D mixture at high speed when compared to the reference fuel (commercial diesel fuel). While the efficiency and fossil GHG emissions were improved with the incorporation of turpentine, it had a mixed effect on polluting emissions such as unburned hydrocarbons (HC) and smoke (PM) and a negative effect on nitrogen oxides (NOx). NOx emissions increased by 30% for high loads and 20% for low loads, mainly as an indirect effect of the improvement in the engine performance and not so much as a consequence of the marginally higher oxygen content of turpentine relative to commercial diesel fuel. [ABSTRACT FROM AUTHOR]

This article presents causal recipes leading to high and low energy consumption efficiency performances using fuzzy set Qualitative Comparative Analysis (fsQCA). The study found that several causal conditions are sufficient for high energy efficiency performance, including several fiscal and financial incentive policies, a highly educated population, many completed dwellings, and low GDP. The study also found that high inequality in completed dwellings and completed reconstructions, coupled with a low GDP and a low number of policies, lead to high energy consumption efficiency performance. In addition, the analysis showed slight differences between the yearly consistencies, suggesting that time effects are not a concern. On the other hand, a low education level, Gini coefficient, few completed dwellings and reconstructions, coupled with a low number of fiscal and financial policies, are the causal conditions leading to low energy consumption efficiency performance. The study's results suggest that policymakers and stakeholders should consider a combination of several causal conditions when implementing energy efficiency policies. The study also highlights the need for policies focusing on education, fiscal and financial incentives, completed dwellings, and reconstructions to achieve high energy efficiency performance. [ABSTRACT FROM AUTHOR]

This article investigates the impact of fiscal and financial incentives for energy efficiency labels on eco-friendly houses (houses with high energy efficiency certificates, such as A+, A, B, and B−) in 18 municipalities in the Lisbon metropolitan region during the period 2014–2020. The empirical results indicate that the variables of fiscal incentive policies for energy efficiency labels, income per capita, credit agreements for the purchase or construction of a house, and the number of completed dwellings in new constructions for family housing encourage eco-friendly houses. In contrast, the variable number of completed reconstructions per 100 completed new constructions has a negative impact. Although this study is constrained by data limitations resulting from the short period under analysis and the moderate number of municipalities available, it advances the discussions around energy efficiency in residential properties in Portugal. Furthermore, it investigates the effectiveness of tax incentive policies for energy efficiency seals as an instrument for promoting ecological houses in the municipalities of the Lisbon metropolitan area. Thus, the need to study the Portuguese capital stands out as it is the most populous city in the country and concentrates a large part of the economic activity. [ABSTRACT FROM AUTHOR]

Building information modelling (BIM) is the first step towards implementing Building 4.0, where virtual reality and digital twins are key elements. The use of unmanned aircraft systems (UAS/drones) to capture data from buildings is nowadays a very popular method, so a methodology was developed to digitally integrate the photogrammetric surveys of a building into BIM, exclusively with the use of drones. Currently, buildings are responsible for 40% of energy consumption in Europe; therefore, the interconnection between BIM and building energy modelling (BEM) is essential to digitalize the construction sector, increasing competitiveness through cost reduction. In this context, the BlueWoodenHouse Project aims, among other activities, to characterize the solutions/systems of building materials and monitor the temperature, relative humidity and CO2, as well as energy consumption, of a single-family modular wooden house located in the north of Portugal, with 190 m2 and three users. Thus, the experimental monitoring results, of this case study, were used to validate the numerical model developed in the DesignBuilder simulator, which includes the building envelope's 3D geometrical data obtained by one of those aircraft, in order to demonstrate the usefulness of drones for the optimization of solutions, from the energy point of view. [ABSTRACT FROM AUTHOR]

The main objective of this research is to assess the impact of energy certificate ratings (EPCs) on the value per m2 of Portuguese housing sales. Data from 289 Portuguese municipalities between 2014 and 2019, analysed with a fixed effects panel and method of moments quantile regression, were used. EPCs with high energy efficiency ratings (e.g., A+, A, B, and B-) are used as a proxy for dwellings with "green" or "environmentally friendly" certificates. On the other hand, ratings with a low energy efficiency (e.g., C, D, E, and F) are used as a proxy for dwellings with "non-green" or "not environmentally friendly" certificates. The results support that EPCs associated with green housing increase the value per m2 of housing sales, and those associated with non-green housing decrease the sales value. It was also found that municipal GDP, tax/financial incentive policies for energy efficiency, and the number of completed dwellings in new constructions for family housing will increase sales value. On the other hand, credit agreements and completed reconstructions reduce sales value. Lastly, the results and outgrowths of this study will support the policymakers and governments in developing consistent policies and initiatives that promote the "green" or "eco-friendly" dwellings in Portugal or in similar economies. [ABSTRACT FROM AUTHOR]

Understanding how to address today's global challenges is critical to improving corporate performance in terms of economic and environmental sustainability. In wastewater treatment systems, such an approach implies integrating efficient treatment technologies with aspects of the circular economy. In this business field, energy costs represent a large share of operating costs. This work discusses technological and management aspects leading to greater energy savings in Portuguese wastewater treatment companies. A mixed methodology, involving qualitative and quantitative aspects, for collecting and analysing data from wastewater treatment plants was used. The qualitative aspects consisted of a narrative analysis of the information available on reports and websites for 11 wastewater management companies in Portugal (e.g., technologies, treated wastewater volumes and operating costs) followed by a review of several international studies. The quantitative approach involved calculating the specific energy consumption (kWh/m3), energy operating costs (EUR/m3) and energy operating costs per population equivalent (EUR/inhabitants) using data from the literature and from Portuguese companies collected from the SABI database. The results suggested that the most environmentally and economically sustainable solution is algae-based technology which might allow a reduction in energy operating costs between 0.05–0.41 EUR/m3 and 15.4–180.8 EUR/inhabitants compared to activated sludge and other conventional methods. This technology, in addition to being financially advantageous, provides the ability to eliminate the carbon footprint and the valorisation of algae biomass, suggesting that this biotechnology is starting to position itself as a mandatory future solution in the wastewater treatment sector. [ABSTRACT FROM AUTHOR]

Energy return on investment (EROI) is a ratio of the energy obtained in relation to the energy used to extract/produce it. The EROI of fossil fuels is globally decreasing. What do the declining EROIs of energy sources imply for society as a whole? We answer this question by proposing a novel EROI measure that describes, through one parameter, the efficiency of a society in managing energy resources over time. Our comprehensive societal EROI measure was developed by (1) expanding the boundaries of the analysis up to the useful stage; (2) estimating the amount of energy embodied in the energy-converting capital; (3) considering non-conventional sources such as the muscle work of humans and draught animals; and (4) considering the influence of imported and exported energy. We computed the new EROI for Portugal as a case study. We find a considerably lower EROI value, at around 3, compared to those currently available, which is stable over a long-time range (1960–2014). This suggests an independence of EROI from economic growth. When estimated at the final stage, using conventional methods (i.e., without applying the four novelties here introduced), we find a declining societal EROI. Therefore, our results imply that the production of new and more efficient final-to-useful energy converting capital has historically kept societal EROI around a stable value by offsetting the effects of the changing returns of energy sources at the primary and final stages. This will be crucial in the successful transition to renewables. [ABSTRACT FROM AUTHOR]

The urban water sector significantly contributes to energy consumption and greenhouse gas (GHG) emissions. Detailed assessment of the wastewater system input provides opportunities for improving the water, energy, and emissions nexus. The inflow of water not requiring treatment into wastewater systems is acknowledged worldwide. These undue inflows can increase the footprint of these systems. Together with flooding and discharges, monitoring of undue inflows is not a common practice in water utilities. Three levels of analysis are proposed to assess the magnitude of the impact of undue inflows in the water–energy–greenhouse gas (W-E-G) emissions nexus: at a national level, calculation of performance indicators using yearly data; at the utility level, performance indicators calculations using yearly, monthly, and sub-daily data; at the subsystem level, calculations using mathematical modeling. Results show the implications of undue inflows on energy and GHG emissions, including the effect of flooding and discharges. The importance of undue inflows in the W-E-G nexus is sustained by the results of three case studies in Portugal. Each level of analysis is tailored to the information available, allowing a step-by-step understanding of the relationship between water, energy consumption, and emissions of the urban drainage inflows. [ABSTRACT FROM AUTHOR]

The effect of energy policies on the energy performance of residential properties/houses in nineteen Portuguese districts from 2014 to 2021 was investigated. A linear random-effects model regression was used as the method in this empirical investigation. The empirical results indicated that the income per capita has a negative effect on residential properties with high energy efficiency certificates (e.g., A+, A, and B) and a positive impact on residential properties with low energy efficiency certificates (e.g., C, D, E, and F); the codes and standards energy policies for energy efficiency have a positive effect on residential properties with high energy efficiency certificates (e.g., A, B, and B−) and residential properties with low energy efficiency certificates (e.g., C, D, E, and F); the fiscal and financial incentive policies for energy efficiency have a positive effect on residential properties with high energy efficiency certificates (e.g., A+, A, and B) and a negative effect on residential properties with B− energy certificate, and also a negative effect on residential properties with low energy efficiency certificates (e.g., C and D) and a positive effect on residential properties with an F energy certificate; the information and education policies of energy efficiency have a positive effect on residential properties with high energy efficiency certificates (e.g., A+, A, and B) and residential properties with low energy efficiency certificates (e.g., C, D, and E); and, finally, the consumer credit per capita has a positive effect on residential properties with high energy efficiency certificates (e.g., A+, A, and B) and a negative effect on residential properties with low energy efficiency certificates (e.g., C, D, and F), as well as a positive effect on residential properties with an F energy certificate. [ABSTRACT FROM AUTHOR]

Energy-poverty (EP) must be considered an energy-related issue since buildings are a central part of people's daily lives. Thus, it has an important role in energy-related policy implementation. Even though the European Union (EU) has endorsed general energy efficiency through the Energy Efficiency Directive and Energy Performance of Buildings Directive recast, it was the Clean Energy Package for all Europeans that clearly highlighted EP. The growing concerns with EP have also been emphasised in subsequent directives and initiatives. Despite some regulatory framework and the milder climate situation, the proportion of the population experiencing thermal discomfort in southern and eastern European countries, namely in the winter season, is relatively high, reflecting the poor thermal performance of building stock, low family incomes and high energy prices, among others. The current work analysed the EP evolution in Portugal in the EU context, and the Thermal Building Regulations and Energy Efficiency Policies developed, aiming to add insight into the effectiveness of those policies concerning EP mitigation in Portugal as an EU Member state. Moreover, a critical debate on the potential to lower the EP Portuguese situation was also an objective to pursue. It is plausible to admit that reducing EP by acting on residential building stock, namely through the increase of energy efficiency and comfort, plays a key role in improving the living conditions, namely of vulnerable households and deprived areas. This will also decrease energy consumption and dependence while further promoting a smarter, sustainable and inclusive society, contributing to economic growth. [ABSTRACT FROM AUTHOR]

Energy conservation is a popular topic in scientific research today, despite the specific effects of energy conservation awareness still being investigated. Significant research about this topic has been performed in different countries. However, the research conducted so far concerns methods of energy saving, a building's energy efficiency and new technologies; however, a significant part of society will live in technologically old buildings for a long time, which requires the involvement of consumers to save energy. To explain how energy-saving awareness plays a role in energy-saving behavior, this study will take city dwellers as a research facility and integrate relevant literature and disciplines, such as information and knowledge management, with the mechanistic study of how energy-saving awareness influences behavior that conserves energy and establishes a sensible behavior model. The survey was conducted in Poland, Portugal and Italy with over 18,000 people who declared that they are responsible for managing the household. In addition to the quantitative and qualitative research defining the percentage of behavior, the research group gave answers to the assessment of energy management, both assessing itself and the activities carried out in its own households on the Likert scale. The SERVPERF method was used for this. The results of the study clearly show that not only do economic factors affect energy saving, but also an informed society that cares about resource management. The research carried out presents the measures undertaken to save energy, and also identifies the level of knowledge and behavior that reflect pro-ecological trends and care for the sustainable development of the city, country and one's own household. [ABSTRACT FROM AUTHOR]

Balancing energy demand and supply will become an even greater challenge considering the ongoing transition from traditional fuel to electric vehicles (EV). The management of this task will heavily depend on the pace of the adoption of light-duty EVs. Electric vehicles have seen their market share increase worldwide; the same is happening in Portugal, partly because the government has kept incentives for consumers to purchase EVs, despite the COVID-19 pandemic. The consequent shift to EVs entails various challenges for the distribution network, including coping with the expected growing demand for power. This article addresses this concern by presenting a case study of an area comprising 20 municipalities in Northern Portugal, for which battery electric vehicles (BEV) sales and their impact on distribution networks are estimated within the 2030 horizon. The power required from the grid is estimated under three BEV sales growth deterministic scenarios based on a daily consumption rate resulting from the combination of long- and short-distance routes. A Monte Carlo computational simulation is run to account for uncertainty under severe EV sales growth. The analysis is carried out considering three popular BEV models in Portugal, namely the Nissan Leaf, Tesla Model 3, and Renault Zoe. Their impacts on the available power of the distribution network are calculated for peak and off-peak hours. The results suggest that the current power grid capacity will not cope with demand increases as early as 2026. The modeling approach could be replicated in other regions with adjusted parameters. [ABSTRACT FROM AUTHOR]

This article considers the relationship between trade intensity, energy consumption, income per capita, and carbon dioxide emissions from 1970–2016 for the Portuguese economy. Considering the arguments of monopolistic competition, the article tests the hypotheses of trade and energy consumption on climate change. We use the autoregressive distributed lag-ARDL model, quantile regression, and cointegration models such as fully modified ordinary least squares (FMOLS), canonical cointegration regression, and dynamic ordinary least squares (DOLS) as an econometric strategy. The econometric results have support with the literature review. The variables used in this research are integrated with the first differences, as indicated by the unit root test. The empirical study proves that trade intensity contributes to environmental improvements. However, energy consumption presents a positive impact on CO2 emissions. The econometric results also demonstrated that a sustainable environmental system exists in the long run. [ABSTRACT FROM AUTHOR]

The recently approved regulation on Energy Communities in Europe is paving the way for new collective forms of energy consumption and production, mainly based on photovoltaics. However, energy modeling approaches that can adequately evaluate the impact of these new regulations on energy community configurations are still lacking, particularly with regards to the grid tariffs imposed on collective systems. Thus, the present work models three different energy community configurations sustained on collective photovoltaics self-consumption for a small city in southern Portugal. This energy community, which integrates the city consumers and a local winery, was modeled using the Python-based Calliope framework. Using real electricity demand data from power transformers and an actual winery, the techno-economic feasibility of each configuration was assessed. Results show that all collective arrangements can promote a higher penetration of photovoltaic capacity (up to 23%) and a modest reduction in the overall cost of electricity (up to 8%). However, there are clear trade-offs between the different pathways: more centralized configurations have 53% lower installation costs but are more sensitive to grid use costs (which can represent up to 74% of the total system costs). Moreover, key actor's individual self-consumption rate may decrease by 10% in order to benefit the energy community as a whole. [ABSTRACT FROM AUTHOR]

Energy literacy is a concept which is not widely known by the public; however, it has captured the attention of several researchers in recent years. Concerning the assessment of energy and financial knowledge and people's attitudes, intentions and behavior, it provides a global view of people's knowledge, feelings, concerns and habits related to energy usage. Since energy is such an important resource in our daily lives, we can hardly imagine living without it. Moreover, considering that its production often requires the use of limited resources and leads to the worsening of already existing environmental problems, finding ways to alert consumers to the efficient management of their consumption is an urgent need. Therefore, in this article, we aimed to evaluate energy literacy levels, considering all the dimensions mentioned above, and search for the determinants of these levels. As an added novelty, we also aimed to determine the role of financial knowledge on energy literacy dimensions. After distributing a questionnaire to the university community in Portugal, we found good levels of energy literacy, despite moderate levels of energy and financial knowledge. Gender seems to be a determinant of all energy literacy dimensions, and financial knowledge has a positive and significant impact on energy knowledge. [ABSTRACT FROM AUTHOR]