Search

The pandemic coronavirus COVID-19 spread around the world with deaths exceeding that of SARS. COVID-19 is believed to have been transmitted from animals, especially from bats, and the virus is transmitted from person to person over time. This paper will help countries to make decisions that encourage access to corrected values and get some indication as to whether there are other factors that affect the spread of COVID-19, via methods such as by increasing the daily test rate. This paper presents an intelligent model for analyzing data collected from the countries affected by the COVID-19 virus. It considers the total number of tests that each country has undergone, the number of international tourist arrivals in each country, the percentage of employment, the life expectancy at birth, the median age, the population density, the number of people aged 65 years or older in millions, and the sex ratio. The proposed model is based on machine learning approaches using k-Means as a clustering approach, Support Vector Machine (SVM) as a classifier, and wrapper as a feature extraction approach. It consists of three phases of pre-processing the data collected, the discovery of outlier cases, the selection of the most effective features for each of the total infected, deaths, critical and recovery cases, and the construction of prediction models. Experimental results show that the extracted features of the wrapper technique have shown that it is more capable of fitting and predicting data than the Correlation-Based Feature Selection, Correlation Attribute Evaluation, Information Gain, and Relief Attribute Evaluation techniques. The SVM classifier also achieved the highest accuracy compared to other classification algorithms for predicting total infected, fatal, critical, and recovery cases. [ABSTRACT FROM AUTHOR]

Automatic building extraction from satellite images, an open research topic in remote sensing, continues to represent a challenge and has received substantial attention for decades. This paper presents an object-based and machine learning-based approach for automatic house detection from RGB high-resolution images. The images are first segmented by an algorithm combing a thresholding watershed transformation and hierarchical merging, and then shadows and vegetation are eliminated from the initial segmented regions to generate building candidates. Subsequently, the candidate regions are subjected to feature extraction to generate training data. In order to capture the characteristics of house regions well, we propose two kinds of new features, namely edge regularity indices (ERI) and shadow line indices (SLI). Finally, three classifiers, namely AdaBoost, random forests, and Support Vector Machine (SVM), are employed to identify houses from test images and quality assessments are conducted. The experiments show that our method is effective and applicable for house identification. The proposed ERI and SLI features can improve the precision and recall by 5.6% and 11.2%, respectively. [ABSTRACT FROM AUTHOR]

The phonocardiogram (PCG) can be used as an affordable way to monitor heart conditions. This study proposes the training and testing of several classifiers based on SVMs (support vector machines), k-NN (k-Nearest Neighbor), and NNs (neural networks) to perform binary ("Normal"/"Pathologic") and multiclass ("Normal", "CAD" (coronary artery disease), "MVP" (mitral valve prolapse), and "Benign" (benign murmurs)) classification of PCG signals, without heart sound segmentation algorithms. Two datasets of 482 and 826 PCG signals from the Physionet/CinC 2016 dataset are used to train the binary and multiclass classifiers, respectively. Each PCG signal is pre-processed, with spike removal, denoising, filtering, and normalization; afterward, it is divided into 5 s frames with a 1 s shift. Subsequently, a feature set is extracted from each frame to train and test the binary and multiclass classifiers. Concerning the binary classification, the trained classifiers yielded accuracies ranging from 92.4 to 98.7% on the test set, with memory occupations from 92.7 kB to 11.1 MB. Regarding the multiclass classification, the trained classifiers achieved accuracies spanning from 95.3 to 98.6% on the test set, occupying a memory portion from 233 kB to 14.1 MB. The NNs trained and tested in this work offer the best trade-off between performance and memory occupation, whereas the trained k-NN models obtained the best performance at the cost of large memory occupation (up to 14.1 MB). The classifiers' performance slightly depends on the signal quality, since a denoising step is performed during pre-processing. To this end, the signal-to-noise ratio (SNR) was acquired before and after the denoising, indicating an improvement between 15 and 30 dB. The trained and tested models occupy relatively little memory, enabling their implementation in resource-limited systems. [ABSTRACT FROM AUTHOR]

The Android operating system has gained popularity and evolved rapidly since the previous decade. Traditional approaches such as static and dynamic malware identification techniques require a lot of human intervention and resources to design the malware classification model. The real challenge lies with the fact that inspecting all files of the application structure leads to high processing time, more storage, and manual effort. To solve these problems, optimization algorithms and deep learning has been recently tested for mitigating malware attacks. This manuscript proposes Summing of neurAl aRchitecture and VisualizatiOn Technology for Android Malware identification (SARVOTAM). The system converts the malware non-intuitive features into fingerprint images to extract the quality information. A fine-tuned Convolutional Neural Network (CNN) is used to automatically extract rich features from visualized malware thus eliminating the feature engineering and domain expert cost. The experiments were done using the DREBIN dataset. A total of fifteen different combinations of the Android malware image sections were used to identify and classify Android malware. The softmax layer of CNN was substituted with machine learning algorithms like K-Nearest Neighbor (KNN), Support Vector Machine (SVM), and Random Forest (RF) to analyze the grayscale malware images. It is observed that CNN-SVM model outperformed original CNN as well as CNN-KNN, and CNN-RF. The classification results showed that our method is able to achieve an accuracy of 92.59% using Android certificates and manifest malware images. This paper reveals the lightweight solution and much precise option for malware identification. [ABSTRACT FROM AUTHOR]

In this paper, we develop a hyperspectral feature extraction method called sparse and smooth low-rank analysis (SSLRA). First, we propose a new low-rank model for hyperspectral images (HSIs) where we decompose the HSI into smooth and sparse components. Then, these components are simultaneously estimated using a nonconvex constrained penalized cost function (CPCF). The proposed CPCF exploits total variation penalty, ℓ 1 penalty, and an orthogonality constraint. The total variation penalty is used to promote piecewise smoothness, and, therefore, it extracts spatial (local neighborhood) information. The ℓ 1 penalty encourages sparse and spatial structures. Additionally, we show that this new type of decomposition improves the classification of the HSIs. In the experiments, SSLRA was applied on the Houston (urban) and the Trento (rural) datasets. The extracted features were used as an input into a classifier (either support vector machines (SVM) or random forest (RF)) to produce the final classification map. The results confirm improvement in classification accuracy compared to the state-of-the-art feature extraction approaches. [ABSTRACT FROM AUTHOR]

Electromyogram (EMG) signals have been increasingly used for hand and finger gesture recognition. However, most studies have focused on the wrist and whole-hand gestures and not on individual finger (IF) gestures, which are considered more challenging. In this study, we develop EMG-based hand/finger gesture classifiers based on fixed electrode placement using machine learning methods. Ten healthy subjects performed ten hand/finger gestures, including seven IF gestures. EMG signals were measured from three channels, and six time-domain (TD) features were extracted from each channel. A total of 18 features was used to build personalized classifiers for ten gestures with an artificial neural network (ANN), a support vector machine (SVM), a random forest (RF), and a logistic regression (LR). The ANN, SVM, RF, and LR achieved mean accuracies of 0.940, 0.876, 0.831, and 0.539, respectively. One-way analyses of variance and F-tests showed that the ANN achieved the highest mean accuracy and the lowest inter-subject variance in the accuracy, respectively, suggesting that it was the least affected by individual variability in EMG signals. Using only TD features, we achieved a higher ratio of gestures to channels than other similar studies, suggesting that the proposed method can improve the system usability and reduce the computational burden. [ABSTRACT FROM AUTHOR]

Traditional co-word networks do not discriminate keywords of researcher interest from general keywords. Co-word networks are therefore often too general to provide knowledge if interest to domain experts. Inspired by the recent work that uses an automatic method to identify the questions of interest to researchers like "problems" and "solutions", we try to answer a similar question "what sensors can be used for what kind of applications", which is great interest in sensor- related fields. By generalizing the specific questions as "questions of interest", we built a knowledge network considering researcher interest, called bipartite network of interest (BNOI). Different from a co-word approaches using accurate keywords from a list, BNOI uses classification models to find possible entities of interest. A total of nine feature extraction methods including N-grams, Word2Vec, BERT, etc. were used to extract features to train the classification models, including naïve Bayes (NB), support vector machines (SVM) and logistic regression (LR). In addition, a multi-feature fusion strategy and a voting principle (VP) method are applied to assemble the capability of the features and the classification models. Using the abstract text data of 350 remote sensing articles, features are extracted and the models trained. The experiment results show that after removing the biased words and using the ten-fold cross-validation method, the F-measure of "sensors" and "applications" are 93.2% and 85.5%, respectively. It is thus demonstrated that researcher questions of interest can be better answered by the constructed BNOI based on classification results, comparedwith the traditional co-word network approach. [ABSTRACT FROM AUTHOR]

Several facial expression recognition methods cluster facial elements according to similarity and weight them considering the importance of each element in classification. However, these methods are limited by the pre-definitions of units restricting modification of the structure during optimization. This study proposes a modified support vector machine classifier called Grid Map, which is combined with reinforcement learning to improve the classification accuracy. To optimize training, the input image size is normalized according to the cascade rules of a pre-processing detector, and the regional weights are assigned by an adaptive cell size that divides each region of the image using bounding grids. Reducing the size of the bounding grid reduces the area used for feature extraction, allowing more detailed weighted features to be extracted. Error-correcting output codes with a histogram of gradient is selected as the classification method via an experiment to determine the optimal feature and classifier selection. The proposed method is formulated into a decision process and solved via Q-learning. To classify seven emotions, the proposed method exhibits accuracies of 96.36% and 98.47% for four databases and Extended Cohn-–Kanade Dataset (CK+), respectively. Compared to the basic method exhibiting a similar accuracy, the proposed method requires 68.81% fewer features and only 66.33% of the processing time. [ABSTRACT FROM AUTHOR]

With the development of high-resolution optical sensors, the classification of ground objects combined with multivariate optical sensors is a hot topic at present. Deep learning methods, such as convolutional neural networks, are applied to feature extraction and classification. In this work, a novel deep belief network (DBN) hyperspectral image classification method based on multivariate optical sensors and stacked by restricted Boltzmann machines is proposed. We introduced the DBN framework to classify spatial hyperspectral sensor data on the basis of DBN. Then, the improved method (combination of spectral and spatial information) was verified. After unsupervised pretraining and supervised fine-tuning, the DBN model could successfully learn features. Additionally, we added a logistic regression layer that could classify the hyperspectral images. Moreover, the proposed training method, which fuses spectral and spatial information, was tested over the Indian Pines and Pavia University datasets. The advantages of this method over traditional methods are as follows: (1) the network has deep structure and the ability of feature extraction is stronger than traditional classifiers; (2) experimental results indicate that our method outperforms traditional classification and other deep learning approaches. [ABSTRACT FROM AUTHOR]