Search

To further improve the ride comfort of commercial vehicles, a seat ISD (Inerter–Spring–Damper) suspension utilizing a mechatronic inerter is proposed in this paper. Firstly, a five-DOF (degree-of-freedom) commercial vehicle seat ISD model was built. Then, the positive real network constraint conditions of a biquadratic impedance transfer function were determined, and the meta-heuristic intelligent optimization algorithm was used to solve the parameters. According to the solution, the impedance transfer function was obtained and the specific network structure was realized by network synthesis. Lastly, this study compares the vibration isolation performance of the mechatronic ISD suspension of the vehicle seat with that of a passive suspension. In comparison to passive seat suspension, the seat mechatronic ISD suspension reduces seat vibration transmissibility by 16.33% and vertical acceleration by 16.78%. Results indicate that the new suspension system can be an effective improvement in ride comfort. [ABSTRACT FROM AUTHOR]

This paper addresses the issue of polynomial iterative learning tracking control (Poly-ILC) for continuous-time linear systems (LTI) operating repetitively. It explores the design of an iterative learning control law by examining the stability along the pass theory of 2D repetitive systems. The obtained result is a generalization of the notion of stability along passages, taking into account transient performances. To strike a balance between stability along passages and transient performance, we extend our developed result in the discrete case, relying on some numerical tools. Specifically, in this work we investigate the convergence of tracking error with given learning controller gains. The key contribution of this structure of control lies in establishing an LMI (linear matrix inequality) condition that ensures both pole placement according to desired specifications and the convergence of output error between iterations. Furthermore, new sufficient conditions for stability regions along the pass addressing the tracking problem of differential linear repetitive processes are developed. Numerical results are provided to demonstrate the effectiveness of the proposed approaches. [ABSTRACT FROM AUTHOR]

This study proposes and simulates a smart system that can be used in production car seats to decrease whiplash risk in rear-end crashes. A sliding seat incorporating a semiactively controlled magnetorheological (MR) damper model positioned under the seat-pan is simulated with a validated biofidelic human body model. Since this is the first study that demonstrates a computer controlled anti-whiplash car seat system to the best of the authors' knowledge, a benchmark analysis is carried out to compare the proposed semiactive seat with a state-of-the-art passive anti-whiplash car seat using 23 different crash pulses, including the moderate and high severity crash pulses within the European New Car Assessment Program (EuroNCAP) whiplash risk assessment framework. The proposed semiactive design outperforms the passive seat design by further reducing the values of the critical EuroNCAP whiplash criteria, such as NIC and N k m , together with the loads acting on the upper neck. The semiactive seat lowers the upper-neck shear force by an amount of 4 kg and 7 kg while lessening the NIC by 10% and 21% and N k m by 9% and 56% for the EuroNCAP crash pulses, having a delta-V of 16 km/h and 24 km/h, respectively. The findings presented in this paper can aid in the design of car seats to further mitigate whiplash risk in rear-end crashes. [ABSTRACT FROM AUTHOR]

This paper presents a study of the vibration isolation properties of pneumatic suspension systems for work machinery seats, with a particular focus on adjustable stiffness. It highlights the contribution that semi-active seat suspension systems make to vibration reduction, ultimately leading to improved passenger comfort levels and increased safety for vehicle users. The primary objectives of the research were twofold: firstly, to identify the key parameters of the apneumatic vibration isolation system; and secondly, to evaluate its performance in improving vibration damping. This entailed the development of a mathematical model that would foreground the movement through simulations based on different initial pressures, thus enabling the accurate prediction of real-life scenarios concerning the vibration-damping characteristics of the seating system, taking into account the different design options available for working machine technology applied at the test bed level, of which the pneumatic isolator is an integral component. In the cognitive process, the verification and validation of the formulated theoretical model play an important role. This approach enables the behaviour of the actual system to be inferred from the results of simulation studies, thus allowing the design of an appropriate vibration control system. By simulating different air bellow pressures, the characteristics of the seat suspension system can be assessed. This study provides valuable insights into optimising the vibration-damping capability of the air suspension system. [ABSTRACT FROM AUTHOR]

In self-driving vehicles, passengers can set their seats in an unconventional seating position, such as rear-facing. Sitting in such an orientation can increase the risk of whiplash in the head-and-neck system in a frontal impact, as frontal crashes usually have higher severities compared with rear-end crashes. This paper shows that a forward-facing front seat optimised for rear-impact protection needs to be redesigned to be used as a rear-facing seat. In the second and main part of this paper, a restraint system for rear-facing car seats is developed, and frontal impact simulations with 64 km/h of delta-V are used to evaluate its performance. The designed seating system comprises two rigid torso plates, a fixed recliner and an energy absorber under the seat pan. Without using the developed restraint system, the 50th percentile male human model is exposed to neck shear forces exceeding 600 N. With the developed restraint system, neck shear forces are less than 350 N in frontal impacts with 64 km/h of delta-V. Apart from whiplash, the risk of head, chest, lower extremity and lower back injuries are also evaluated. The results confirm that the developed restraint system successfully protects the occupant since all assessment criteria values are lower than the injury assessment reference values. [ABSTRACT FROM AUTHOR]

Deploying an airbag when a vehicle occupant is too close to it can cause injury. An adaptive Airbag Control Unit (ACU) would improve the effectiveness of the safety system, provided it is aware of the actual position of the occupants once the crash is going to occur. Occupants can be monitored with vision-based and radar-based sensing in the vehicle, but the research question is whether other reliable devices exist. In this research, a real seat is equipped with four sensors in the supports from the floor, as well as an Inertial Measurement Unit (IMU) and a microcontroller. The device is capable of identifying correct position or different Out of Position (OP) conditions and inform an adaptive ACU. The paper presents the seat layout in detail and its testing in extensive driving experiments with multiple participants. Depending on the position of the driver, the identification is correct 45–100% of the time. Monitoring the occupant position by a sensorized seat is feasible and can improve the reliability of the onboard safety system when integrated with other occupant monitoring devices. [ABSTRACT FROM AUTHOR]

Inappropriate or unsafe speed is one of the main factors that affects the number of road crashes as well as the severity of the consequences. Research shows that speed is an influential factor in the occurrence of road crashes in more than 30% of road crashes with fatal outcomes and in over 12% of all road crashes. With an increase in speed, the risk of road crashes increases as well as the severity of the consequences. The perception of the vehicle speed in the traffic lane is one of the basic prerequisites for the safe functioning of traffic, that is, for the successful and timely interaction of all road users. Therefore, the challenge of this paper is to examine how the assessment of the speed of a passenger vehicle in different environments affects the prediction of the respondent's participation in road crashes. Bearing the above in mind, an experimental study was carried out, in real traffic conditions (RTC) as well as in a virtual environment using a driving simulator (DS), at different passenger vehicle speeds (30, 50 and 70 km/h), and at different perspectives of observing the oncoming vehicle (observing the vehicle from the front, from the back, from the side and from the driver's seat) by the respondents. The respondents had the task of evaluating the passenger vehicle speed, in all tested conditions and at all tested speeds. Standard statistical models and fuzzy logic were used to analyze the obtained results. The results show statistically significant differences for all tested situations and all tested speeds as well as statistically significant differences depending on the gender of the respondents, the driver's license category, the driver's experience, frequency of driving and depending on whether respondents wear glasses. Bearing in mind the results of the developed model, by applying fuzzy logic, it can be concluded that the proposed model can be used to assess the propensity of respondents to participate in road crashes, based on perception of vehicle speeds in two tested environments. [ABSTRACT FROM AUTHOR]

Featured Application: By giving specific road excitation, the differential equations and analytical solutions derived in this paper can be used to quickly estimate the vertical displacement and acceleration of the bus passing through this section of the road. The theoretical results and formulae in this paper can provide some guidelines for bus design and bus driving. The comfort of a bus running on different road conditions is a matter of public concern. In this paper, the differential equations of motion are established for a bus running on different road conditions and the whole driving process is mechanically analyzed. Firstly, the bump degree at different positions is quantitatively analyzed and it is found that the rear row is bumpier on different roads. Then, the relationship between the speed of the bus and the vertical displacement and acceleration is quantitatively described. Regardless of the speed, a similar displacement and acceleration will be eventually achieved, but the speed is higher, and the duration of maximum displacement and acceleration is longer. When the speed is 8 m/s, resonance occurs on the bus during road condition II. Finally, the change in vertical displacement and acceleration under the action of different spring stiffness coefficient ratios of the front and rear wheels is quantitatively analyzed. High stiffness ratios mean less displacement and acceleration. By establishing an actual excitation road surface, the differential equations and analytical solutions in this paper can be used to roughly analyze the mechanical response of a traveling bus. These results can provide some guidance for the design and driving of buses. [ABSTRACT FROM AUTHOR]

Furniture as a functional object must satisfy both artistic and scientific requirements. In particular, ergonomic factors are very important in furniture design in terms of human health and productivity. To make furniture designs at the ideal intersection of science and art, it is necessary to approach furniture design with a scientific systematic. Accordingly, this paper summarizes and analyzes the current state of biomechanics in ergonomic furniture design, covering an overview of the biomechanics utilized in different types of furniture design, biomechanical analysis, and testing methods. In the conclusion of the study, the literature analysis identifies the key topics and areas of future exploration regarding the use of biomechanics in ergonomic furniture design. The findings of the review indicate that (1) the primary studies on biomechanics used in furniture design concentrate on special furniture, such as wheelchairs and transportation vehicle seats, with minimal investigation performed on common furniture; (2) mechanical analysis, experimental testing, and computer-aided ergonomics represent the main techniques applied in furniture design biomechanics; (3) the reliability of biomechanics used in furniture design needs to be improved due to the lack of fundamental parameters of the muscles and skeleton of the human body; and (4) more attention should be paid to the use of biomechanics in the design of common furniture, such as household and office furniture, which affects people's health and comfort. The scientific and rational application of biomechanics should be integrated into ergonomic furniture design to promote healthy living and enhance work efficiency. [ABSTRACT FROM AUTHOR]

With a view to maintaining the competitiveness required by the market, the automotive industry strongly encourages its suppliers to develop new production methods and technologies capable of reducing the costs of produced products, ensuring the necessary quality, and increasing flexibility, with a view to responding more easily to the customization of the products that the market increasingly demands. The main goal of this work was to increase the flexibility and productivity of equipment capable of producing the first subset that constitutes the product commonly known as the Bowden cable. To this end, the design science research methodology was used, which was understood as the most effective in describing scientific work related to the improvement of existing systems. Bowden cables are cables that activate various devices in the car, such as opening doors, moving window glasses, and adjusting some car seats, among others. The work consisted of integrating several operations usually carried out for the manufacture of the referred subset, reducing logistics operations and manual work, increasing operator safety, and increasing the production rate and flexibility of the equipment, by reducing the setup time. For this purpose, new mechanical concepts were developed, and automation was applied, which resulted in a completely new concept, able to fulfill all the objectives initially set. It should be noted here that the new equipment allowed a production rate of 1140 p/h, when the initial objective was 1100 p/h; it requires an investment of only around EUR 55,000 (easy return on investment), occupies only 11.6 m2, and has reinforced safety systems to avoid workers' injuries, an aspect that is very important in this type of equipment, where operators deal with cutting systems and high temperatures. The dissemination of this concept could help other researchers to easily find solutions to certain problems that they face in the development of modern equipment. The main contributions of this paper are the novel concepts created to overcome some process difficulties, which can be used for a wide range of other processing situations with similar difficulties. The solutions proposed allow a decrease in the cycle time, present high flexibility, save workshop space, and are affordable in terms of global cost. [ABSTRACT FROM AUTHOR]

Featured Application: Motion comfort of automated driving and other transportation modes. In future automated vehicles we will often engage in non-driving tasks and will not watch the road. This will affect postural stabilization and may elicit discomfort or even motion sickness in dynamic driving. Future vehicles will accommodate this with properly designed seats and interiors, whereas comfortable vehicle motion will be achieved with smooth driving styles and well-designed (active) suspensions. To support research and development in dynamic comfort, this paper presents the validation of a multi-segment full-body human model, including visuo-vestibular and muscle spindle feedback, for postural stabilization. Dynamic driving is evaluated using a "sickening drive", including a 0.2 Hz 4 m/s2 slalom. Vibration transmission is evaluated with compliant automotive seats, applying 3D platform motion and evaluating 3D translation and rotation of pelvis, trunk and head. The model matches human motion in dynamic driving and reproduces fore–aft, lateral and vertical oscillations. Visuo-vestibular and muscle spindle feedback are shown to be essential, in particular, for head–neck stabilization. Active leg muscle control at the hips and knees is shown to be essential to stabilize the trunk in the high-amplitude slalom condition but not with low-amplitude horizontal vibrations. However, active leg muscle control can strongly affect 4–6 Hz vertical vibration transmission. Compared to the vibration tests, the dynamic driving tests show enlarged postural control gains to minimize trunk and head roll and pitch and to align head yaw with driving direction. Human modelling can enable the insights required to achieve breakthrough comfort enhancements, while enabling efficient developments for a wide range of driving conditions, body sizes and other factors. Hence, modelling human postural control can accelerate the innovation of seats and vehicle motion-control strategies for (automated) vehicles. [ABSTRACT FROM AUTHOR]

Little work has been carried out to predict the comfort of aircraft seats, a component in close contact with the human body during travel. In order to more accurately predict the nonlinear and complex relationship between subjective and objective evaluations of comfort, this paper proposes a prediction method based on the Improved Particle Swarm Algorithm (IPSO) and optimized Support Vector Machine Regression (SVR). Focusing on the problems of the too-fast convergence and low accuracy of the traditional particle swarm algorithm (PSO), the improved particle swarm algorithm (IPSO) is obtained by linearly decreasing the dynamic adjustments of inertia weight ω , self-learning factor c 1 , and social factor c 2 ; then, the penalty parameter C and kernel function parameter σ of SVR are optimized by the IPSO algorithm, and the comfort prediction of IPSO-SVR is established. The prediction accuracy of IPSO-SVR was 94.00%, the root mean square error RMSE was 0.37, the mean absolute value error MAE was 0.32, and the goodness of fit R2 was 0.92. The results show that the optimized IPSO-SVR prediction model can more accurately predict seat comfort under different angles and backrest tilt angles and can provide reference and research value for related industries. The results show that the optimized nonlinear prediction model of IPSO-SVR has higher accuracy, and its prediction method is feasible and generalizable, meaning it can provide a reliable basis for the prediction of seat comfort under different angles and backrest inclinations, as well as providing reference and research value for related industries. [ABSTRACT FROM AUTHOR]

This paper presents a prototype of a disinfection system for public transport specifically aiming to disinfect surfaces contaminated with the SARS-CoV-2 virus on buses using 222 nm wavelength far-ultraviolet light (far-UVC). Our study involved testing the developed technical system installed in a 12 m long M3 category urban bus, an investigation of optimal far-UVC light angles, and the determination of disinfection parameters for bus seat disinfection. The study identified the ideal positioning of a light source for effective disinfection and analyzed three disinfection scenarios, considering zone coverage, disinfection time, and energy demand. A subsystem employing real-time occupancy monitoring enhances the disinfection process in crowded areas of buses. An energy efficiency assessment model is proposed for optimizing energy consumption. Furthermore, the energy consumption analyses in different disinfection scenarios provide valuable insights for optimizing energy usage in public transport disinfection. [ABSTRACT FROM AUTHOR]

In the literature the value of the driver's head acceleration has been widely used as an objective function for the modification of the suspension and/or the seat characteristics in order to optimize the ride comfort of a vehicle. For these optimization procedures various lumped parameter Vehicle–Seat–Human models are proposed. In the present paper a Quarter Car model is integrated with three Seat–Human models with different levels of detail. The level of detail corresponds to the number of degrees of freedom used to describe the Seat–Human system. Firstly, the performance of the Quarter Car model, used as a basis, is analyzed in six excitations with different characteristics. Then, the performance of the three lumped parameter Vehicle–Seat–Human models are monitored in the same excitations. The results indicated that in the case of single disturbance excitations the Quarter Car model provided 50–75% higher values of acceleration compared with the eight degrees of freedom model. As far as the periodic excitation is concerned, the Vehicle–Seat–Human models provided values of acceleration up to eight times those of the Quarter Car model. On the other hand, in stochastic excitations the Vehicle–Seat–Human model with three degrees of freedom produced the closest results to the Quarter Car model followed by the eight degrees of freedom model. Finally, with respect to the computational efficiency it was found that an increase in the degrees of freedom of the Vehicle–Seat–Human model by one caused an increase in the CPU time from 2.1 to 2.6%, while increasing the number of the degrees of freedom by five increased the CPU time from 7.4 to 11.5% depending on the excitation. [ABSTRACT FROM AUTHOR]

The seat of a construction machinery cab is used as the research object. For the current human-seat coupling system comfort research methods and optimization index deficiencies, the seat body pressure comfort and vibration comfort at the same time optimized. Based on the more specialized Toyota 50 percentile dummy model, a human-seat finite element simulation model is established, and the body pressure distribution and vibration response are simulated and calculated. The transverse and longitudinal pressure distributions of the backrest and seat cushion and the pressure map are used to verify the simulation model's body pressure comfort evaluation indexes. At the same time, the vibration response test is used to verify the vibration comfort evaluation indexes of the simulation model. The test results show that the accuracy of each evaluation index of the established coupling model is greater than 85%, which can provide model support for the subsequent optimization work. In order to improve the comfort of the seat of construction machinery during operation, the hardness of the upper sponge and lower layer sponge is reduced and increased by 10% and 15%, respectively, on the original seat. The body pressure comfort evaluation indexes of the ischium peak pressure, ischium mean pressure, thigh peak pressure and thigh mean pressure are used to evaluate the improved seat. The proposed optimization scheme is to reduce the hardness of the upper sponge and lower layer sponge of the seat cushion by 10% to improve the seat body pressure comfort. Finally, the evaluation indexes of body pressure comfort and vibration comfort are verified by four subjects in an improved seat, and the cushion pressure of different subjects is reduced while the vibration isolation rate is increased, which shows the rationality of the proposed optimization scheme. In addition, the evaluation results of the improved seat are different for subjects of different body sizes, with the most significant improvement for the subject of greater height and weight. The modeling and comfort evaluation methods adopted in the paper can provide a reference for the design and development of the seat. [ABSTRACT FROM AUTHOR]

The main aim of this article is to present the possibility of assessing the intensity of the impact of vibrations on vehicle users. During vehicle operation, many factors can have impacts on changes in the characteristics of car suspension, which can affect passenger comfort. This paper presents the results obtained from calculations based on a mathematical model, as well as from measurements during laboratory tests. The tests were performed on vehicles that differed in characteristics of damping suspension. The tests were carried out using a test stand for evaluating the effectiveness of shock absorbers in vehicles. During the tests, vibration propagations on the driver's seat and the steering wheel were evaluated. An analysis of the amplitudes and frequencies of vibrations experienced by occupants was carried out. A method for assessing the impact of changes in the damping characteristics of a suspension system on vehicle users' comfort during technical inspection was proposed. [ABSTRACT FROM AUTHOR]

Drivers of heavy trucks are exposed to large amounts of vibration which can lead to serious health risks. Many suspension systems/methods can be used to isolate these transmitted vibrations, such as vehicle suspension systems, cabin suspension systems and seating suspension systems. The central idea of the work is to identify the research gaps and raise our future research questions in this specific area. The novelty of this paper is proposing a model predictive controller for active vibration control of seating suspension systems. A systematic literature review of the existing work of the vibration control of seating suspension systems has been conducted. Various control techniques that are used in the seating suspension systems have been summarized and evaluated. This paper focusses on the biodynamic model of the driver and seat for the first step needed in the design of the seating suspension system. Then, it illustrates the different types of the system vibration controls and their performance evaluation methods. At the end, the paper details several active seating suspension systems including their actuation system structures and control algorithms which are used in the heavy vehicle trucks. [ABSTRACT FROM AUTHOR]

Polyester is currently the main material used for the manufacture of safety belts used in car transport for the protection of passengers and the driver. The seat belt is the main passive safety element used in vehicle engineering. In this work, the behavior of two safety belts, one with three-point fastening and the other with four-point fastening, which equip the seat of a racing car used in Formula Student for use in a frontal impact with a vertical wall. A model with finite elements is used to describe the entire car–driver shock-absorber assembly. The von Mises stresses calculated for both cases under consideration are below the tensile strength. The tensions arising in the belt and the accelerations required at various points of the driver's body are determined by both the properties of the utilized polyester and the chosen construction variant. The obtained results justify the use of the three-point and four-point belt in the cases of both common and race cars. [ABSTRACT FROM AUTHOR]

The aim of the study is to compare the head displacement of the KPSIT C50 dummy during a frontal collision at a speed of 20 km/h, along with the change in the angle of the car seat backrest. Passenger car manufacturers recommend setting the backrest angle of the car seat between 100 and 125 degrees. It should be noted that the driver's position is of great importance in the event of a collision injury. In the event of a rear-end collision, the position of the headrest of the car seat is an element that affects the degree of the driver's injuries. In extreme cases, incorrect positioning of the headrest, even at low speed, can lead to serious injuries to the cervical spine and even death. The article is part of a large-scale study on low-speed crash testing. The research problem concerned the influence of the seat backrest angle on the head displacement during a low-speed collision. The article compares the displacement of the head of the KPSIT C50 dummy during a series of crash tests, where the angle of the car seat backrest was changed. On the basis of the research, it was found that the optimal angle of the car seat backrest is 110 degrees. In addition, a preliminary analysis of the displacements of the dummy's head showed a high risk of whiplash injury in people sitting in a fully reclined seat. [ABSTRACT FROM AUTHOR]

This study investigates inter-island accessibility in the Azores Islands (Portugal), a region marked by unique territorial fragmentation and significant distances between islands. Recognizing the pivotal role of sea and air transport in fostering the socioeconomic development of the archipelago by enhancing resident mobility and attracting tourism, we address the challenges posed by the region's low demographic and economic influence and the pronounced imbalances among islands. The methodological approach involves the examination of various accessibility parameters, with a specific focus on hourly operations identified as presenting the most unfavorable ratios of time availability in the destinations. We analyze inter-island sea and air schedules during the winter season, emphasizing their relevance for residents engaged in travel for business, health, administration, and related purposes. We have mainly analyzed the air schedules since it was possible to make the round trip on the same day on only two maritime routes, although these have also been considered. Regarding the study outcomes, they reveal that despite positive efforts to implement air public service obligations (PSO), which mandate specific frequencies, seat allocations, and rate caps, among other examples, the limited attention given to adapting operating hours based on demand undermines the effectiveness of these measures. Contextually, this lack of adjustment results in substantial inconvenience for travelers, particularly those engaged in round-trip operations on the same day, a common scenario in inter-island mobility. In more than 70% of the operational routes, suitable travel times at the destination are significantly compromised. [ABSTRACT FROM AUTHOR]

This paper deals with the issues of the impact of vertical vibrations on a child seated in a child seat during a journey. Its purpose was to assess the impact of fastening the child seats and road conditions on the level of vibrations recorded on child seats. The paper describes the tested child seats, the methodology of the tests and the test apparatus included in the measuring track. The tests were carried out in real road conditions where the child seats were located on the rear seat of a passenger vehicle. One was attached with standard seat belts, and the other with the ISOFIX base. When driving on roads with three types of surface, the following vertical accelerations were measured: seat of the child seats, the rear seat of the vehicle and the ISOfix base. The recorded accelerations were first analyzed in the time domain and then in the frequency domain. Three indexes (r.m.s, rmq and VDV) were used to assess the vibration comfort. Research has shown that the classic method of fastening a child seat with standard seat belts is more advantageous in terms of vibration comfort. Calculated indicators confirmed the negative impact of separating the child seat from the rear seat of the vehicle using the IQ ISOFIX base. [ABSTRACT FROM AUTHOR]

This paper presents a Negative Stiffness System (NSS) for vibration isolation and comfort improvement of vehicle seats, which enhances the performance of optimized traditional passive seat suspensions. The NSS is based on a set of two Pneumatic Linear Actuators (PLAs) added to a seat supported by a pneumatic spring. One end of each PLA is joined to the seat while the other end is joined to the vehicle frame. In static conditions, the PLAs remain horizontal, whereas in dynamic conditions, their vertical forces work against the pneumatic spring, reducing the overall dynamic stiffness and improving passenger comfort. The paper presents a stability analysis of the highly nonlinear dynamic system, as well as the numerical determination of the optimum PLA pressure for a given passenger mass that maximises comfort without instabilities. Finally, the performance of the proposed NSS is compared to that of a traditionally optimized passive seat suspension via simulations of an eight-degree-of-freedom vehicle model traversing several road profiles and speed bumps. Comfort improvements between 10 % and 35 % are found in all tests considered. [ABSTRACT FROM AUTHOR]

This paper focuses on a thorough summary of vital function measuring methods in vehicles. The focus of this paper is to summarize and compare already existing methods integrated into car seats with the implementation of inter alia capacitive electrocardiogram (cECG), mechanical motion analysis Ballistocardiography (BCG) and Seismocardiography (SCG). In addition, a comprehensive overview of other methods of vital sign monitoring, such as camera-based systems or steering wheel sensors, is also presented in this article. Furthermore, this work contains a very thorough background study on advanced signal processing methods and their potential application for the purpose of vital sign monitoring in cars, which is prone to various disturbances and artifacts occurrence that have to be eliminated. [ABSTRACT FROM AUTHOR]

Due to the complexity of the automobile manufacturing process, some flexible and delicate assembly work relies on manual operations. However, high-frequency and high-load repetitive operations make assembly workers prone to physical fatigue. This study proposes a method for evaluating human physical fatigue for the manual assembly of automobiles with methods: NIOSH (National Institute for Occupational Safety and Health), OWAS (Ovako Working Posture Analysis System) and RULA (Rapid Upper Limb Assessment). The cerebral oxygenation signal is selected as an objective physiological index reflecting the human fatigue level to verify the proposed physical fatigue evaluation method. Taking auto seat assembly and automobile manual assembly as an example, 18 group experiments were carried out with the ARE platform (Augmented Reality-based Ergonomic Platform). Furthermore, predictions of metabolic energy expenditure were performed for experiments in Tecnomatix Jack. Finally, it is concluded that the proposed physical fatigue evaluation method can reflect the human physical fatigue level and is more accurate than the evaluation of metabolic energy consumption in Tecnomatix Jack because of the immersion that comes with the AR devices and the precision that comes with motion capture devices. [ABSTRACT FROM AUTHOR]

The automotive industry and scientific community are making efforts to develop innovative solutions that would increase successful driver performance in preventing crashes caused by drivers' health and concentration. High stress is one of the causes of impaired driver performance. This study investigates the ability to classify different stress levels based on capacitive electrocardiogram (cECG) recorded during driving by unobtrusive acquisition systems with different hardware implementations. The proposed machine-learning model extracted only four features, based on the detection of the R peak, which is the most reliably detected characteristic point even in inferior quality cECG. Another criterion for selecting the features is their low computational complexity, which enables real-time application. The proposed method was validated on three open data sets recorded during driving: electrocardiogram (ECG) recorded by electrodes with direct skin contact (high quality); cECG recorded without direct skin contact through clothes by electrodes built into a portable multi-modal cushion (middle quality); and cECG recorded through the clothes without direct skin contact by electrodes built into a car seat (lowest quality). The proposed model achieved a high accuracy of 100% for high-quality ECG, 96.67% for middle-quality cECG, and 98.08% for the lower-quality cECG. [ABSTRACT FROM AUTHOR]

The seat comfort of automobiles is one of the significant factors for determining the driver's fatigue, emotional experience, and individual space (which captures their individuality, rather than just a means of transportation in modern society). Conventional automobile seats could not provide seating comfort suitable for all drivers, in the form of seats that fit each driver's body type and the difficulty of meeting individual needs. This study proposes self-shape adjustable (the SSA seats) seats that improve the sitting comfort, safety, and secure the stability, by adjusting shape fit to the driver's body type. The SSA seats transforms the seat itself, in a way that improves the distribution of contact pressure and reduces sitting fatigue, with the pneumatic system. The transformed seats provide better sitting comfort and safety than the conventional automobile seat, by providing a seat shape suitable for the body shape of all users. It was verified that the SSA seats, proposed in this paper, have a uniform and improved pressure distribution, compared to the conventional seat, in various sitting postures; the contact area between the seat and user is enlarged, and the pressure concentrated on the ischial bone is lowered. In addition, it was proven (through user evaluation) that quantitative evaluation verification was the same as qualitative evaluation results. [ABSTRACT FROM AUTHOR]

This study aims to address the challenge of implementing Lean philosophy in Small and Medium Enterprises (SMEs) and fill the research gap regarding Lean application in vehicle seat upholstery maintenance/repairing processes. The Lean tools applied in a case study of an upholstery industry of vehicle seats were as follows: Value Stream Mapping, Spaghetti Diagram, Gemba, 5S, Standardized Work, Kaizen, Kanban, and Poka-Yoke tools. A Decision Support Method using Excel Microsoft 365 was developed for improved stock control. A GUT Matrix was formulated to prioritize improvement opportunities, aiding prompt decision-making. This systematic approach enabled the company to address critical areas requiring swift attention. The results of Lean tools implementation led to a process waste minimization around 47%, and the process Lead Time decreased by approximately 26%, resulting in a 33% production increase. Thus, the Lean tools integration leads to substantial waste reduction, shorter process time, and increased production. The Decision Support Method enabled the company to efficiently monitor and manage its stock levels, thereby enhancing inventory management practices. This case study outlines the successful optimization of an upholstery production process in an SME by effectively applying Lean tools, highlighting its feasibility and benefits. [ABSTRACT FROM AUTHOR]

This study investigated the squeal mechanism induced by friction in a lead screw system. The dynamic instability in the friction noise model of the lead screw was derived through a complex eigenvalue analysis via a finite element model. A two degree of freedom model was described to analyze the closed solutions generated in the lead screw, and the friction noise sensitivity was examined. The analysis showed that the main source of friction noise in the lead screw was the bending mode pair, and friction-induced instability occurred when the ratio of the stiffness of the bending pair modes was 0.9–1. We also built an architecture to predict multiple outputs from a single model using deep neural networks and demonstrated that friction-induced instability can be predicted by deep neural networks. In particular, instability with nonlinearity was predicted very accurately by deep neural networks with a maximum absolute difference of about 0.035. [ABSTRACT FROM AUTHOR]

As an advanced driver assistance system, automatic emergency braking (AEB) can effectively reduce accidents by using high-precision and high-coverage sensors. In particular, it has a significant advantage in reducing front-end collisions and rear-end accidents. Unfortunately, avoiding side collisions is a challenging problem for AEB. To tackle these challenges, we propose active seat belt pretensioning on driver injury in vehicles equipped with AEB in unavoidable side crashes. Firstly, records of impact cases from China's National Automobile Accident In-Depth Investigation System were used to investigate a scenario in which a vehicle is impacted by an oncoming car after the vehicle's AEB system is triggered. The scenario was created using PreScan software. Then, the simulated vehicles in the side impact were devised using a finite element model of the Toyota Yaris and a moving barrier. These were constructed in HyperMesh software along with models of the driver's side seatbelt, side airbag, and side curtain airbag. Moreover, the models were verified, and driver out-of-position instances and injuries were evaluated in simulations with different AEB intensities up to 0.7 g for three typical side impact angles. Last but not least, the optimal combination of seatbelt pretensioning and the timing thereof for minimizing driver injury at each side impact angle was identified using orthogonal tests; immediate (at 0 ms) pretensioning at 80 N was applied. Our experiments show that our active seatbelt with the above parameters reduced the weighted injury criterion by 5.94%, 22.05%, and 20.37% at impact angles of 90°, 105°, and 120°, respectively, compared to that of a conventional seatbelt. The results of the experiment can be used as a reference to appropriately set the collision parameters of active seat belts for vehicles with AEB. [ABSTRACT FROM AUTHOR]

A monopost seat is a novel, lightweight seat developed to utilize most of the interior space of vehicles. The space under the seat can be utilized by inserting a monopost columnar structure between a monopost seat rail and the floorboard. This design increases the perceived spaciousness of the vehicle and imparts passengers with a higher degree of freedom, because the seats can be adjusted more easily than standard seats. Meeting these requirements will require the seats to be sufficiently strong and sturdy in order to maintain passenger safety. Compared to traditional seats, it is more likely that a monopost seat will shift under the mass of the passenger, and these seats are more vulnerable to external vehicle collisions. Passenger safety is further compromised if an operational function is added. Therefore, further research on monopost seats is required. This study performed quasi-static and dynamic simulations to determine if the attachment of monopost seats to a vehicle meets international safety requirements in collision events. With a focus on clarifying the dynamic simulation process, the outcomes of quasi-static simulations were compared with the results obtained from dynamic simulations. [ABSTRACT FROM AUTHOR]

During oviposition trials, temperature readings on the dataloggers were noted at the 12 h check when oviposition substrate was switched. Thermostat data from some Canadian homes during the 2021 Western North America heat wave indicate internal home temperatures may reach oviposition-augmenting temperatures in extreme heat events [[29]]. Modeling used to predict sealed cabin temperatures indicate that a 30 °C day may raise internal temperatures beyond our observed limits of survival and oviposition [[34]]. Upper lethal temperatures provide information about where and when blow fly populations can persist, while upper non-lethal temperatures provide information as to where and when female blow flies can likely oviposit. [Extracted from the article]

Since drunk driving poses a significant threat to road traffic safety, there is an increasing demand for the performance and dependability of online drunk driving detection devices for automobiles. However, the majority of current detection devices only contain a single sensor, resulting in a low degree of detection accuracy, erroneous judgments, and car locking. In order to solve the problem, this study firstly designed a sensor array based on the gas diffusion model and the characteristics of a car steering wheel. Secondly, the data fusion algorithm is proposed according to the data characteristics of the sensor array on the steering wheel. The support matrix is used to improve the data consistency of the single sensor data, and then the adaptive weighted fusion algorithm is used for multiple sensors. Finally, in order to verify the reliability of the system, an online intelligent detection device for drunk driving based on multi-sensor fusion was developed, and three people using different combinations of drunk driving simulation experiments were conducted. According to the test results, a drunk person in the passenger seat will not cause the system to make a drunk driving determination. When more than 50 mL of alcohol is consumed and the driver is seated in the driver's seat, the online intelligent detection of drunk driving can accurately identify drunk driving, and the car will lock itself as soon as a real-time online voice prompt is heard. This study enhances and complements theories relating to data fusion for online automobile drunk driving detection, allowing for the online identification of drivers who have been drinking and the locking of their vehicles to prevent drunk driving. It provides technical support for enhancing the accuracy of online systems that detect drunk driving in automobiles. [ABSTRACT FROM AUTHOR]

In seating comfort research, it is known that the pressure should not exceed a certain threshold from the viewpoint of tissue compression and should be widely distributed. However, its ideal distribution is not defined in past research. It is also known that the comfortable pressure distribution is not always constant and has individual differences. It is assumed that this is due to the influence of individual differences in body shape, such as skeletal shape and flesh of the seated person, and individual differences in sitting posture, but the mechanism has not been clarified by analyses including these factors. From the above, it is considered that the comfortable pressure distribution cannot be explained only by the mechanical state. In this study, we focused on the pressure sensitivity of thighs and buttocks and performed an analysis assuming seating in an automobile seat. We determined the exponent of Steven's power law for seat pressure by measuring local perceived pressure load that felt the same pressure feeling at the reference load point, and the sensitivity distribution of 29 participants were measured and classified them into 4 types. The comfortable pressure distribution of five participants was measured using the experimental seat and converted into a perceived pressure distribution using the sensitivity distribution. The results show measured pressure distribution is not the same as perceived. Analysis of the perceived pressure distribution suggests that the comfortable perceived pressure distribution is a uniform distribution that falls within a certain range for the minimum pressure. [ABSTRACT FROM AUTHOR]

The vehicular market is undergoing a profound transformation that includes a trend toward fully automated driving. When travelling in automated systems, the main task is no longer driving. Therefore, the interior design of automated vehicles requires a renovation to adapt to new use cases. With this motivation, the use case of sleeping while travelling was chosen for this user study, in which different seat configuration conditions were evaluated. The three preselected seat positions for this research included the upright, reclined and flat seat positions. To the best of our knowledge, this study is the first to examine the comfort of different seat angles in meeting the need to sleep in a moving vehicle. Since the physical experience of the occupants with a high-fidelity seat prototype is essential to evaluate the new interior concept of the vehicle of the future, in this study, the experimental participants were asked about their perception of comfort and overall user experience while travelling by car under close-to-real test conditions. Therefore, the primary objective of this evaluation was to explore different seat configurations and find the most suitable seat position for the use case of sleeping in a car while moving. Our findings suggest that users prefer reclining and flat seats in short-/medium- and long-term use cases, respectively. [ABSTRACT FROM AUTHOR]

This review focuses on studying passive vibration isolation techniques and their applications. Advantages and disadvantages of different vibration isolation techniques will be compared in order to find an innovative method to reduce seating suspension system vibration and improve the ride comfort of vehicles' drivers. Quasi-zero stiffness (QZS) isolators of high-static–low-dynamic stiffness are found to have good application prospects in low-frequency vibration isolation. In order to improve the isolation performance of the seating suspension system, a specially made seat cushion will be studied where a quasi-zero stiffness (QZS) isolator such as a double-diamond isolator is selected as one of the cells/units/elements of the seat cushion mattress. The double-diamond isolator structure does not represent the whole seating suspension system. The transmissibility ratio of the double-diamond isolator is evaluated by analytical and simulation models and compared to that of a conventional linear spring isolator. Although the performance of the passive vibration isolation/control system is usually worse than that of the active or semi-active control system, the cost of the passive vibration isolation/control system is lower than that of the active and semi-active control system, and the relative simplicity of adding a vibration isolation cushion mattress in an existing passive seating suspension system makes it low in cost, easy to implement, and more attractive than the active and semi-active vibration control systems. [ABSTRACT FROM AUTHOR]

As a major device for reducing vibration and protecting passengers, the low-frequency vibration control performance of commercial vehicle seating systems has become an attractive research topic in recent years. This article reviews the recent developments in active seat suspensions for vehicles. The features of active seat suspension actuators and the related control algorithms are described and discussed in detail. In addition, the vibration control and reduction performance of active seat suspension systems are also reviewed. The article also discusses the prospects of the application of machine learning, including artificial neural network (ANN) control algorithms, in the development of active seat suspension systems for vibration control. [ABSTRACT FROM AUTHOR]

Presently, most passive safety tests are performed with a precisely specified seat position and carefully seated ATD (anthropomorphic test device) dummies. Facing the development of autonomous vehicles, as well as the need for safety verification during crashes with various seat positions such research is even more urgently needed. Apart from the numerical environment, the existing testing equipment is not validated to perform such an investigation. For example, ATDs are not validated for nonstandard seatback positions, and the most accurate method of such research is volunteer tests. The study presented here was performed on a sled test rig utilizing a 50cc Hybrid III dummy according to a full factorial experiment. In addition, input factors were selected in order to verify a safe test condition for surrogate testing. The measured value was head acceleration, which was used for calculation of a head injury criterion. What was found was an optimal seat angle −117°—at which the head injury criteria had the lowest represented value. Moreover, preliminary body dynamics showed a danger of whiplash occurrence for occupants in a fully-reclined seat. [ABSTRACT FROM AUTHOR]

Several developed countries have implemented smart systems for public transport that provide mobility services for citizens. Most of these systems use special infrastructures to determine the location of citizens and public buses. However, the implementation of these systems does not take into account the poor infrastructure of developing countries. In Mexico, Urban Passenger Transport has insufficient transport units to meet the demand of passengers who move throughout the day, and these do not consider hardware infrastructure. Our solution is focused on inexpensive devices that are accessible to citizens, such as mobile phones. In this research work, a smart information system for passengers of urban transport is presented that allows passengers to know the expected arrival times and also to know the availability of seats on the bus that is heading towards their position. The solution was evaluated with real routes, and the results are promising for a pilot project to be put in practice. [ABSTRACT FROM AUTHOR]

Professional drivers need constant attention during long driving periods and sometimes perform tasks outside the truck. Driving discomfort may justify inattention, but it does not explain post-driving accidents outside the vehicle. This study aims to study the discomfort developed during driving by analysing modified preferred postures, pressure applied at the interface with the seat, and changes in pre- and post-driving gait patterns. Each of the forty-four volunteers drove for two hours in a driving simulator. Based on the walking speed changes between the two gait cycles, three homogeneous study groups were identified. Two groups performed faster speeds, while one reduced it in the post-steering gait. While driving, the pressure at the interface and the area covered over the seat increased throughout the sample. Preferred driving postures differed between groups. No statistical differences were found between the groups in the angles between the segments (flexed and extended). Long-time driving develops local or whole-body discomfort, increasing interface pressure over time. While driving, drivers try to compensate by modifying their posture. After long steering periods, a change in gait patterns can be observed. These behaviours may result from the difficulties imposed on blood circulation by increasing pressure at this interface. [ABSTRACT FROM AUTHOR]

Background: The growth of the number of vehicles in traffic has led to an exponential increase in the number of road accidents with many negative consequences, such as loss of lives and pollution. Methods: This article focuses on using a new technology in automotive electronics by equipping a semi-autonomous vehicle with a complex sensor structure that is able to provide centralized information regarding the physiological signals (Electro encephalogram—EEG, electrocardiogram—ECG) of the driver/passengers and their location along with indoor temperature changes, employing the Internet of Things (IoT) technology. Thus, transforming the vehicle into a mobile sensor connected to the internet will help highlight and create a new perspective on the cognitive and physiological conditions of passengers, which is useful for specific applications, such as health management and a more effective intervention in case of road accidents. These sensor structures mounted in vehicles will allow for a higher detection rate of potential dangers in real time. The approach uses detection, recording, and transmission of relevant health information in the event of an incident as support for e-Call or other emergency services, including telemedicine. Results: The novelty of the research is based on the design of specialized non-invasive sensors for the acquisition of EEG and ECG signals installed in the headrest and backrest of car seats, on the algorithms used for data analysis and fusion, but also on the implementation of an IoT temperature measurement system in several points that simultaneously uses sensors based on MEMS technology. The solution can also be integrated with an e-Call system for telemedicine emergency assistance. Conclusion: The research presents both positive and negative results of field experiments, with possible further developments. In this context, the solution has been developed based on state-of-the-art technical devices, methods, and technologies for monitoring vital functions of the driver/passengers (degree of fatigue, cognitive state, heart rate, blood pressure). The purpose is to reduce the risk of accidents for semi-autonomous vehicles and to also monitor the condition of passengers in the case of autonomous vehicles for providing first aid in a timely manner. Reported abnormal values of vital parameters (critical situations) will allow interveneing in a timely manner, saving the patient's life, with the support of the e-Call system. [ABSTRACT FROM AUTHOR]

A bus seat needs to be designed ergonomically for better seating comfort. The present study is intended to develop a cost-effective ergonomic bus seat design based on seat comfort and safety demands. As part of the proposed seat design procedure, seating comfort analysis, identifying preferred design features, and developing a seat design are included. An analysis of the bus seat back and seat pan profiles was conducted. Based on the results of the comfort analysis, the authors identified the preferred design features of bus seats during the design identification process. An improved bus seat prototype was developed based on selected design features in the design development stage. Seating comfort analyses were used to compare the achieved seat with the reference seat. The seat design developed in the present study may be applicable for various types of bus public transport. [ABSTRACT FROM AUTHOR]