Search

Hemp (Cannabis sativa) stalk fibres from industry residues were incorporated into polybutylene adipate terephthalate, a synthetic biodegradable polyester, to produce films and paper coatings. The lignocellulosic components and the chemical composition of the fibres were analysed, and the results highlight the bioactivity due to cannabinoids, alkanoids, and lignin, among others, making the fibres attractive for active food packaging. The incorporation, without chemical modification, of 2% (w/w) hemp in the PBAT matrix increased the water vapour permeability of PBAT around 22%. The impact on mechanical properties was determined, and the results show that the PBAT/hemp film is less stretchable but stronger than the pure PBAT film. The incorporation of hemp enhanced significantly the compostability of PBAT. The PBAT/hemp films and paper coatings composted two times faster than those using pure PBAT. [ABSTRACT FROM AUTHOR]

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m2 had very good hydrophobic properties (Cobb60 < 4 g/m2), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m2 backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications. [ABSTRACT FROM AUTHOR]

With the emphasis placed by society on environmental resources, current petroleum-based packaging in the food industry can no longer meet people's needs. However, new active packaging technologies have emerged, such as proteins, polysaccharides, and lipids, in which proteins are widely used for their outstanding gel film-forming properties. Most of the current literature focuses on research applications of single protein-based films. In this paper, we review the novel protein-based packaging technologies that have been used in recent years to categorize different proteins, including plant proteins (soybean protein isolate, zein, gluten protein) and animal proteins (whey protein isolate, casein, collagen, gelatin). The advances that have recently been made in protein-based active packaging technology can be understood by describing protein sources, gel properties, molding principles, and applied research. This paper presents the current problems and prospects of active packaging technology, provides new ideas for the development of new types of packaging and the expansion of gel applications in the future, and promotes the development and innovation of environmentally friendly food packaging. [ABSTRACT FROM AUTHOR]

At a time when food safety awareness is increasing, attention is paid not only to food and additives but also to packaging materials. Most current food packaging is usually made of traditional petroleum-based polymeric materials, which are not biodegradable and have adverse effects on the environment and health. In this context, the development of new non-toxic and biodegradable materials for extending the best-before date of food is receiving increasing attention. In addition, additives in packaging materials may migrate outward, resulting in contact with food. For this reason, additives are also seen as a transition from synthetic additives to natural extracts. Active extracts from animals and plants having good antioxidant and antibacterial properties are also beneficial for human health. It is indisputable that active extracts are ideal substitutes for synthetic additives. Polymer packaging materials combined with active extracts not only maintain their original mechanical and optical properties and thermal stability but also endow polymers with new functions to extend the shelf life of food. This review paper provides an overview of this promising natural extract-containing polymer-based active packaging, with a focus on plant essential oils (containing phenolics, monoterpenes, terpene alcohols, terpene ketones, and aldehydes), pigments (procyanidins), vitamins (vitamin B), and peptides (nisin). In particular, this paper covers the research progress of such active extracts, in single or compound forms, combined with diverse polymers (mostly biopolymers) for food packaging applications with particular focus on the antioxidant and antibacterial properties of packaging materials. [ABSTRACT FROM AUTHOR]

Active food packaging incorporated with natural plant extracts as food preservatives, which will totally replace chemical preservatives gradually, are of major interest. Sequentially to our and other scientists' previous work, in this paper we present the results of a study on the development of a novel active food packaging film based on the incorporation of a natural-halloysite/carvacrol-extract nanohybrid with the commercially used low-density polyethylene. The corona-treatment procedure was employed to incorporate a natural preservative on to the optimum final film. Packaging films are formatted with and without incorporation of natural-halloysite/carvacrol-extract nanohybrid and are coated externally, directly or via corona-treatment, with carvacrol essential oil. Mechanical, physicochemical, and preservation tests indicated that the low-density polyethylene incorporated perfectly with a natural-halloysite/carvacrol-extract nanohybrid. The extra external coating of the film with pure carvacrol extract using the corona-treatment technique led to approximately 100% higher Young Modulus values, slightly decreased ultimate strength by 20%, and exhibited almost stable elongation at break properties. The water vapor and oxygen properties were increased by 45 and 43%, correspondingly, compared to those of pure low-density polyethylene film. Finally, the antioxidant activity of the corona-treated film increased by 28% compared to the untreated film coated with carvacrol because of the controlled release rate of the carvacrol. [ABSTRACT FROM AUTHOR]

Bacterial cellulose (BC) is a biodegradable polymer resembling paper after being dried. It finds a growing number of applications in many branches of industry and in medicine. In the present study, BC was produced after Gluconacetobacter hansenii ATCC 23769 strain culture and used as a matrix for plant extracts (tulsi, brahmi, lemon, blackberry, nettle root, and nettle leave) and essential oils (cinnamon, sage, clove, mint, thyme, lemongrass, rosemary, lemon, anise, tea tree, lime, grapefruit, and tangerine), and the antimicrobial properties of these biomaterials was determined. The growth-inhibiting effects of plant extracts and essential oils combined with BC were analyzed against five Cronobacter species isolated from food matrix and two reference strains from the ATCC (513229 and 29544). Additional analyses were conducted for BC water activity and for its capability to absorb biologically active plant compounds. The cellulose matrix with a 50% extract from brahmi was found to effectively inhibit the growth of the selected Cronobacter strains. The other plant water extracts did not show any antimicrobial activity against the tested strains. It was demonstrated that BC soaked with thyme essential oil was characterized with the strongest antimicrobial activity in comparison to the other tested EOs. These study results indicate the feasibility of deploying BC impregnated with natural plant components as an active and environmentally-friendly packaging material. [ABSTRACT FROM AUTHOR]

Enhancing food preservation and safety using environmentally friendly techniques is urgently needed. The aim of this study was to develop food packaging films using biodegradable poly-L-lactic acid (PLA) as biopolymer and carvacrol (CV) essential oil as an antioxidant/antibacterial agent for the replacement of chemical additives. CV was adsorbed onto natural zeolite (NZ) via a new vacuum adsorption method. The novel nanohybrid CV@NZ with a high CV content contained 61.7%wt. CV. Pure NZ and the CV@NZ nanohybrid were successfully dispersed in a PLA/triethyl citrate (TEC) matrix via a melt extrusion process to obtain PLA/TEC/xCV@NZ and PLA/TEC/xNZ nanocomposite films with 5, 10, and 15%wt CV@NZ or pure NZ content. The optimum resulting film PLA/TEC/10CV@NZ contained 10%wt. CV@NZ and exhibited self-healable properties, 22% higher tensile strength, 40% higher elongation at break, 45% higher water barrier, and 40% higher oxygen barrier than the pure PLA/TEC matrix. This film also had a high CV release content, high CV control release rate as well as 2.15 mg/L half maximal effective concentration (EC50) and 0.27 mm and 0.16 mm inhibition zones against Staphylococcus aureus and Salmonella enterica ssp. enterica serovar Typhimurium, respectively. This film not only succeeded in extending the shelf life of fresh minced pork, as shown by the total viable count measurements in four days but also prevented the lipid oxidation of fresh minced pork and provided higher nutritional values of the minced meat, as revealed by the heme iron content determination. It also had much better and acceptable sensory characteristics than the commercial packaging paper. [ABSTRACT FROM AUTHOR]

Certain naturally occurring volatile organic compounds are able to mitigate food spoilage caused by microbial growth. Their considerable vapor pressure enables them to create an antimicrobial atmosphere within a package, and this property can be used for the development of active food-packaging technologies. The volatility of these molecules, however, makes their stabilization difficult and limits their effectiveness. Whilst much research is being undertaken on the use of natural antimicrobial volatiles for inhibiting microbial growth in food, less attention has been paid to the design of controlled-release mechanisms that permit the efficient application of these compounds. Most studies to date either spray the volatile directly onto the fresh product, immerse it in a solution containing the volatile, or embed the volatile in a paper disc to create a vapor in the headspace of a package. More sophisticated alternatives would be delivery systems for the sustained release of volatiles into the package headspace. Such systems are based on the encapsulation of a volatile in organic or inorganic matrices (cyclodextrins, electrospun non-wovens, polymer films, micelles, molecular frameworks, etc.). However, most of these devices lack an efficient triggering mechanism for the release of the volatile; most are activated by humidity. All of these techniques are revised in the present work, and the most recent and innovative methods for entrapping and releasing volatiles based on reversible covalent bonds are also discussed. [ABSTRACT FROM AUTHOR]

Listeria monocytogenes is a foodborne pathogen that causes listeriosis, a group of human illnesses that appear more frequently in countries with better-developed food supply systems. This review discusses the efficacy of actual biocontrol methods combined with the main types of food involved in illnesses. Comments on bacteriophages, lactic acid bacteria, bacteriocins, essential oils, and endolysins and derivatives, as main biological antilisterial agents, are made bearing in mind that, using them, food processors can intervene to protect consumers. Both commercially available antilisterial products and solutions presented in scientific papers for mitigating the risk of contamination are emphasized. Potential combinations between different types of antilisterial agents are highlighted for their synergic effects (bacteriocins and essential oils, phages and bacteriocins, lactic acid bacteria with natural or synthetic preservatives, etc.). The possibility to use various antilisterial biological agents in active packaging is also presented to reveal the diversity of means that food processors may adopt to assure the safety of their products. Integrating biocontrol solutions into food processing practices can proactively prevent outbreaks and reduce the occurrences of L. monocytogenes-related illnesses. [ABSTRACT FROM AUTHOR]

In recent years, much attention has been paid to the use of biopolymers as food packaging materials due to their important characteristics and properties. These include non-toxicity, ease of availability, biocompatibility, and biodegradability, indicating their potential as an alternative to conventional plastic packaging that has long been under environmental scrutiny. Given the current focus on sustainable development, it is imperative to develop studies on biopolymers as eco-friendly and sustainable food packaging materials. Therefore, the aim of this review is to explore trends and characteristics of biopolymer-based biodegradable films for food packaging, analyze the contribution of various journals and cooperation between countries, highlight the most influential authors and articles, and provide an overview of the social, environmental, and economic aspects of biodegradable films for food packaging. To achieve this goal, a bibliometric analysis and systematic review based on the PRISMA method were conducted. Relevant articles were carefully selected from the Scopus database. A bibliometric analysis was also conducted to discuss holistically, comprehensively, and objectively biodegradable films for food packaging. An increasing interest was found in this study, especially in the last 3 years with Brazil and China leading the number of papers on biodegradable films for food packaging, which were responsible for 20.4% and 12.5% of the published papers, respectively. The results of the keyword analysis based on the period revealed that the addition of bioactive compounds into packaging films is very promising because it can increase the quality and safety of packaged food. These results reveal that biodegradable films demonstrate a positive and promising trend as food packaging materials that are environmentally friendly and promote sustainability. [ABSTRACT FROM AUTHOR]

The issue of achieving controlled or targeted release of bioactive compounds with specific functional properties is a complex task that requires addressing several factors, including the type of bioactive, the nature of the delivery system, and the environmental conditions during transportation and storage. This paper deals with extensive reporting for the identification of original articles using Scopus and Google Scholar based on active packaging as a novel packaging technology that controls the release of antimicrobial agents encapsulated into carriers in the food packaging systems. For evidence-based search, the studies were extracted from 2015 to 2020 and screened using the 2020 Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Following the review and screening of publications, 32 peer-reviewed articles were subjected to systematic analysis. The preliminary search indicated that the encapsulation of bioactives enhances their bioavailability and stability. From a theoretical viewpoint, mathematical models play an important role in understanding and predicting the release behavior of bioactives during transportation and storage, thus facilitating the development of new packaging material by a systematic approach. However, only a few studies could formulate parameters for mathematical models in order to achieve the specific release mechanism regulated for the quality and safety of foods. Therefore, this paper will cover all encapsulation approaches, active packaging, and mathematical modeling in the food industry into structural form and analyze the challenges faced by the complex nature of active packaging in real food systems. [ABSTRACT FROM AUTHOR]

With the strengthening of the public awareness of food safety and environmental protection, functional food packaging materials have received widespread attention. Nanofibers are considered as promising packaging materials due to their unique one-dimensional structure (high aspect ratio, large specific surface area) and functional advantages. Electrospinning, as a commonly used simple and efficient method for preparing nanofibers, can obtain nanofibers with different structures such as aligned, core-shell, and porous structures by modifying the devices and adjusting the process parameters. The selection of raw materials and structural design of nanofibers can endow food packaging with different functions, including antimicrobial activity, antioxidation, ultraviolet protection, and response to pH. This paper aims to provide a comprehensive review of the application of electrospun nanofibers in functional food packaging. Advances in electrospinning technology and electrospun materials used for food packaging are introduced. Moreover, the progress and development prospects of electrospun nanofibers in functional food packaging are highlighted. Meanwhile, the application of functional packaging based on nanofibers in different foods is discussed in detail. [ABSTRACT FROM AUTHOR]

Nowadays a possible strategy in food preservation consists of the use of active and functional packaging to improve safety and ensure a longer shelf life of food products. Many studies refer to chitosan-based films because of the already-known chitosan (CH) antibacterial and antifungal activity. In this work, we developed CH-based films containing Dried Olive Leaf Extract (DOLE) obtained by Naviglio extractor, with the aim to investigate the polyphenols yield and the antioxidant activity of this extract entrapped in CH-based-edible films. Olive tree cultivation produces a huge amount of byproducts that are usually simply burned. Phenolic compounds are already studied for their beneficial effects on human health. Some studies reported that phenols isolated from olive leaves have been shown to inhibit the growth of different strains of microorganisms. Thus, the antimicrobial effect of DOLE-containing films against bacterial strains (Salmonella enterica subsp. enterica serovar Typhimurium ATCC® 14028, Salmonella enteritidis RIVM 706, and Enterococcus faecalis ATCC® 29212) was tested in vitro. The DOLE component of the films is effective in inhibiting all the bacteria tested in a dose-dependent manner. Thus, it was demonstrated that these edible films can act as active bioplastics when used to wrap hamburgers in substitution for baking paper, which is normally used. [ABSTRACT FROM AUTHOR]

Τhe replacement of food packaging additives and preservatives with bio-based antioxidant/antibacterial compounds has been a common practice in recent years following the trend of bioeconomy and nanotechnology. Such bio-additives are often enclosed in nanocarriers for a controlled release process. Following this trend in this work, a thymol (TO)-rich activated carbon (AC) nanohybrid was prepared and characterized physicochemically with various techniques. This TO@AC nanohybrid, along with the pure activated carbon, was extruded with low-density polyethylene (LDPE) to develop novel active packaging films. The codenames used in this paper were LDPE/xTO@AC and LDPE/xAC for the nanohybrid and the pure activated carbon, respectively. X-ray diffractometry, Fourier-transform infrared spectroscopy, and scanning electron microscopy measurements showed high dispersity of both the TO@AC nanohybrid and the pure AC in the LDPE matrix, resulting in enhanced mechanical properties. The active film with 15 wt.% of the TO@AC nanohybrid (LDPE/15TO@AC) exhibited a 230% higher water/vapor barrier and 1928% lower oxygen permeability than the pure LDPE film. For this active film, the highest antioxidant activity referred to the DPPH assay (44.4%), the lowest thymol release rate (k2 ≈ 1.5 s−1), and the highest antibacterial activity were recorded, resulting in a 2-day extension of fresh pork fillets' shelf-life. [ABSTRACT FROM AUTHOR]

The research of starch as a matrix material for manufacturing biodegradable films has been gaining popularity in recent years, indicating its potential and possible limitations. To compete with conventional petroleum-based plastics, an enhancement of their low resistance to water and limited mechanical properties is essential. This review aims to discuss the various types of nanofillers and additives that have been used in plasticized starch films including nanoclays (montmorillonite, halloysite, kaolinite, etc.), poly-saccharide nanofillers (cellulose, starch, chitin, and chitosan nanomaterials), metal oxides (titanium dioxide, zinc oxide, zirconium oxide, etc.), and essential oils (carvacrol, eugenol, cinnamic acid). These reinforcements are frequently used to enhance several physical characteristics including mechanical properties, thermal stability, moisture resistance, oxygen barrier capabilities, and biodegradation rate, providing antimicrobial and antioxidant properties. This paper will provide an overview of the development of starch-based nanocomposite films and coatings applied in food packaging systems through the application of reinforcements and additives. [ABSTRACT FROM AUTHOR]

Quality losses in fresh produce throughout the postharvest phase are often due to the inappropriate use of preservation technologies. In the last few decades, besides the traditional approaches, advanced postharvest physical and chemical treatments (active packaging, dipping, vacuum impregnation, conventional heating, pulsed electric field, high hydrostatic pressure, and cold plasma) and biocontrol techniques have been implemented to preserve the nutritional value and safety of fresh produce. The application of these methodologies after harvesting is useful when addressing quality loss due to the long duration when transporting products to distant markets. Among the emerging technologies and contactless and non-destructive techniques for quality monitoring (image analysis, electronic noses, and near-infrared spectroscopy) present numerous advantages over the traditional, destructive methods. The present review paper has grouped original studies within the topic of advanced postharvest technologies, to preserve quality and reduce losses and waste in fresh produce. Moreover, the effectiveness and advantages of some contactless and non-destructive methodologies for monitoring the quality of fruit and vegetables will also be discussed and compared to the traditional methods. [ABSTRACT FROM AUTHOR]

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products. [ABSTRACT FROM AUTHOR]

Consumers are now more concerned about food safety and hygiene following the COVID-19 pandemic. Antimicrobial packaging has attracted increased interest by reducing contamination of food surfaces to deliver quality and safe food while maintaining shelf life. Active packaging materials to reduce contamination or inhibit viral activity in packaged foods and on packaging surfaces are mostly prepared using solvent casting, but very few materials demonstrate antiviral activity on foods of animal origin, which are important in the human diet. Incorporation of silver nanoparticles, essential oils and natural plant extracts as antimicrobial agents in/on polymeric matrices provides improved antifungal, antibacterial and antiviral properties. This paper reviews recent developments in antifungal, antibacterial and antiviral packaging incorporating natural or synthetic compounds using preparation methods including extrusion, solvent casting and surface modification treatment for surface coating and their applications in several foods (i.e., bakery products, fruits and vegetables, meat and meat products, fish and seafood and milk and dairy foods). Findings showed that antimicrobial material as films, coated films, coating and pouches exhibited efficient antimicrobial activity in vitro but lower activity in real food systems. Antimicrobial activity depends on (i) polar or non-polar food components, (ii) interactions between antimicrobial compounds and the polymer materials and (iii) interactions between environmental conditions and active films (i.e., relative humidity, oxygen and water vapor permeability and temperature) that impact the migration or diffusion of active compounds in foods. Knowledge gained from the plethora of existing studies on antimicrobial polymers can be effectively utilized to develop multifunctional antimicrobial materials that can protect food products and packaging surfaces from SARS-CoV-2 contamination. [ABSTRACT FROM AUTHOR]

At present, the research and innovation of packaging materials are in a period of rapid development. Starch, a sustainable, low-cost, and abundant polymer, can develop environmentally friendly packaging alternatives, and it possesses outstanding degradability and reproducibility in terms of improving environmental issues and reducing oil resources. However, performance limitations, such as less mechanical strength and lower barrier properties, limit the application of starch in the packaging industry. The properties of starch-based films can be improved by modifying starch, adding reinforcing groups, or blending with other polymers. It is of significance to study starch as an active and intelligent packaging option for prolonging shelf life and monitoring the extent of food deterioration. This paper reviews the development of starch-based films, the current methods to enhance the mechanical and barrier properties of starch-based films, and the latest progress in starch-based activity, intelligent packaging, and food applications. The potential challenges and future development directions of starch-based films in the food industry are also discussed. [ABSTRACT FROM AUTHOR]

Active food packaging is a dynamic area where the scientific community and industry have been trying to find new strategies to produce innovative packaging that is economically viable and compatible with conventional production processes. The materials used to develop active packaging can be organized into scavenging and emitting materials, and based on organic and inorganic materials. However, the incorporation of these materials in polymer-based flexible packaging is not always straightforward. The challenges to be faced are mainly related to active agents' sensitivity to high temperatures or difficulties in dispersing them in the high viscosity polymer matrix. This review provides an overview of methodologies and processes used in the production of active packaging, particularly for the production of active flexible films at the industrial level. The direct incorporation of active agents in polymer films is presented, focusing on the processing conditions and their effect on the active agent, and final application of the packaging material. Moreover, the incorporation of active agents by coating technologies and supercritical impregnation are presented. Finally, the use of carriers to help the incorporation of active agents and several methodologies is discussed. This review aims to guide academic and industrial researchers in the development of active flexible packaging, namely in the selection of the materials, methodologies, and process conditions. [ABSTRACT FROM AUTHOR]

Active packaging films were prepared by adding red cabbage anthocyanin extract (RCAE) into acetylated distarch phosphate (ADSP). This paper investigated the influence of the interaction relationship between RCAE and the film matrix on the structure, barrier, antioxidant and release properties of active films. Sixteen principal compounds in RCAE were identified as anthocyanins based on mass spectroscopic analysis. Micromorphological observations indicated that the RCAE distribution uniformity in the films decreased as the RCAE content increased. When the concentration of RCAE was not higher than 20%, the moisture absorption and oxygen permeability of films decreased. The stability of RCAE in the films was enhanced by the electrostatic interaction between RCAE and ADSP with the formation of hydrogen bonds, which facilitated the sustainability of the antioxidant properties of films. The release kinetics of RCAE proved that the release rate of RCAE in active films was the fastest in distilled water, and Fickian's law was appropriate for portraying the release behavior. Moreover, the cytocompatibilty assay showed that the test films were biocompatible with a viability of >95% on HepG2 cells. Thus, this study has established the suitability of the films for applications in active and food packaging. [ABSTRACT FROM AUTHOR]

Plant essential oils (EOs) have an important ability to inhibit ethylene biosynthesis. Nevertheless, the effects of EOs on the key components of ethylene biosynthesis (l-aminocyclopropane-1-carboxylic (ACC) oxidase activity, ACC synthase activity, and ACC content) have not yet been thoroughly studied. Accordingly, this study focused on the effects of emitted EOs from active packaging (EO doses from 100 to 1000 mg m−2) on the key components of ethylene biosynthesis of blueberries and blackberries under several storage temperatures. Anise EO and lemon EO active packaging induced the greatest inhibitory effects (60–76%) on the ethylene production of blueberries and blackberries, respectively, even at high storage temperatures (22 °C). In terms of EO doses, active packaging with 1000 mg m−2 of anise EO or lemon EO led to the highest reduction of ethylene production, respectively. At 22 °C, the investigated EO active packing reduced the activities of ACC synthase and ACC oxidase up to 50%. In order to minimise ethylene biosynthesis in blueberries and blackberries when they are stored even under improper temperature scenarios at high temperatures, this EO active packaging is a natural and efficient technological solution. [ABSTRACT FROM AUTHOR]

Essential oils (EOs) extracted from plants have a high potential to reduce ethylene biosynthesis, although their effects have not been deeply studied yet on the key components of the ethylene biosynthesis pathway: l-aminocyclopropane-1-carboxylic (ACC) oxidase activity, ACC synthase activity, and ACC content. Hence, the present study aimed to elucidate the effects of released EOs from active packaging (with different EO doses ranging from 100 to 1000 mg m−2) on the ethylene biosynthesis key components of broccoli and tomato under different storage temperature scenarios. The largest ethylene inhibitory effects on broccoli and tomatoes were demonstrated by grapefruit EO and thyme essential EO (up to 63%), respectively, which were more pronounced at higher temperatures. Regarding EO doses, active packaging with a thyme EO dose of 1000 mg m−2 resulted in the strongest reduction (33–38%) of ethylene production in tomatoes. For broccoli, identical results were shown with a lower grapefruit EO dose of 500 mg m−2. The studied EO-active packaging decreased ACC synthase and ACC oxidase activities by 40–50% at 22 °C. Therefore, this EO-active packaging is a natural and effective technology to reduce ethylene biosynthesis in broccoli and tomatoes when they are stored, even in unsuitable scenarios at high temperatures. [ABSTRACT FROM AUTHOR]

The development of active packaging for food storage containers is possible through impregnation of natural extracts by supercritical CO2-assisted impregnation processes. The challenge of scCO2-impregnation of natural extracts is to control the total loading and to ensure that the composition of the loaded extract may preserve the properties of the crude extract. This study aimed at investigating the scCO2-impregnation of clove extract (CE) in polycarbonate (PC) to develop antibacterial packaging. A design of experiments was applied to evaluate the influences of temperature (35–60 °C) and pressure (10–30 MPa) on the clove loading (CL%) and on the composition of the loaded extract. The CL% ranged from 6.8 to 18.5%, and the highest CL% was reached at 60 °C and 10 MPa. The composition of the impregnated extract was dependent on the impregnation conditions, and it differed from the crude extract, being richer in eugenol (81.31–86.28% compared to 70.06 in the crude extract). Differential scanning calorimetry showed a high plasticizing effect of CE on PC, and high CL% led to the cracking of the PC surface. Due to the high loading of eugenol, which is responsible for the antibacterial properties of the CE, the impregnated PC is promising for producing antibacterial food containers. [ABSTRACT FROM AUTHOR]

Over the last ten years, researchers' efforts have aimed to replace the classic linear economy model with the circular economy model, favoring green chemical and industrial processes. From this point of view, biologically active molecules, coming from plants, flowers and biomass, are gaining considerable value. In this study, firstly we focus on the development of a green protocol to obtain the purification of anthocyanins from the flower of Callistemon citrinus, based on simulation and on response surface optimization methodology. After that, we utilize them to manufacture and add new properties to bioplastics belonging to class 3, based on modified polyvinyl alcohol (PVA) with increasing amounts from 0.10 to 1.00%. The new polymers are analyzed to monitor morphological changes, optical properties, mechanical properties and antioxidant and antimicrobial activities. Fourier transform infrared spectroscopy (FTIR) spectra of the new materials show the characteristic bands of the PVA alone and a modification of the band at around 1138 cm−1 and 1083 cm−1, showing an influence of the anthocyanins' addition on the sequence with crystalline and amorphous structures of the starting materials, as also shown by the results of the mechanical tests. These last showed an increase in thickening (from 29.92 μm to approx. 37 μm) and hydrophobicity with the concomitant increase in the added anthocyanins (change in wettability with water from 14° to 31°), decreasing the poor water/moisture resistance of PVA that decreases its strength and limits its application in food packaging, which makes the new materials ideal candidates for biodegradable packaging to extend the shelf-life of food. The functionalization also determines an increase in the opacity, from 2.46 to 3.42 T%/mm, the acquisition of antioxidant activity against 2,2-diphenyl-1-picrylhdrazyl and 2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) radicals and, in the ferric reducing power assay, the antimicrobial (bactericidal) activity against different Staphylococcus aureus strains at the maximum tested concentration (1.00% of anthocyanins). On the whole, functionalization with anthocyanins results in the acquisition of new properties, making it suitable for food packaging purposes, as highlighted by a food fresh-keeping test. [ABSTRACT FROM AUTHOR]

Essential oils are interesting active additives for packaging manufacturing as they can provide the final material with active functionalities. However, they are frequently volatile compounds and can be degraded during plastic processing. In this work Rosmarinus officinalis (RO) essential oil was encapsulated into Diatomaceous earth (DE) microparticles and into Halloysite nanotubes (HNTs) and further used to produce eco-friendly active packaging based on polylactic acid (PLA). PLA-based composites and nanocoposites films based on PLA reinforced with DE + RO and HNTs + RO, respectively, were developed by melt extrusion followed by cast-film, simulating the industrial processing conditions. As these materials are intended as active food packaging films, the obtained materials were fully characterized in terms of their mechanical, thermal and structural properties, while migration of antioxidant RO was also assessed as well as the compostability at laboratory scale level. Both DE and HNTs were able to protect the Rosmarinus officinalis (RO) from thermal degradation during processing, allowing to obtain films with antioxidant properties as demonstrated by the antioxidant assays after the materials were exposed for 10 days to a fatty food simulant. The results showed that incorporating Rosmarinus officinalis encapsulated in either DE or HNTs and the good dispersion of such particles into the PLA matrix strengthened its mechanical performance and sped up the disintegration under composting conditions of PLA, while allowing to obtain films with antioxidant properties of interest as antioxidant active food packaging materials. [ABSTRACT FROM AUTHOR]

Antioxidant films were prepared using poly(vinyl chloride) (PVC) incorporated with 0.5% or 1.0% zinc oxide (ZnO)-flavonoid (quercetin or morin) nanoparticles (NPZnO-Q% or NPZnO-M%) via the casting method. NP incorporation within the polymer matrix influenced the structural, morphological, optical, and thermal properties of the PVC-based films, as well as their antioxidant activity as assessed using the DPPH radical scavenging method. Our results indicated that increasing ZnO-flavonoid NP concentration increased films thickness, while reducing ultraviolet light (UV) transmittance but conserving transparency. The presence of NPZnO-Q% or NPZnO-M% improved the surface uniformity and thermal stability of the active films. In terms of antioxidant activity, there was an enhancement in the DPPH radical scavenging capacity (PVC/ZnO-Q1.0% > PVC/ZnO-Q0.5% > PVC/ZnO-M0.5% > PVC/ZnO-M1.0% > PVC), suggesting that the packaging can help protect food from oxidative processes. Therefore, these antioxidant films represent an innovative strategy for using as active food packaging material, especially intended for aiding in quality preservation and extending the shelf life of fatty foods. [ABSTRACT FROM AUTHOR]

Recent bibliographic research highlights the innovative application of organic and inorganic nanoparticles in edible coatings for seafood preservation. Given the high susceptibility of seafood to spoilage, incorporating nanoparticles into coatings presents a promising solution. These nanoparticles possess significant antioxidant and antimicrobial properties, which contribute to maintaining the quality and extending the shelf life of seafood products. This study reviews various materials and synthesis techniques for nanoparticles, assessing their characteristics and suitability for food applications. It emphasizes the role of nanotechnology in enhancing the mechanical properties of biopolymer-based coatings, which are biodegradable and non-toxic, thus promoting environmental sustainability. The findings indicate that nanoparticle-infused coatings effectively improve the physicochemical properties of seafood, such as pH stabilization and the reduction in total nitrogenous volatile bases, while also inhibiting microbial growth. This multifaceted approach not only addresses food waste and safety concerns but also supports the fishing industry by enhancing product quality. Overall, this research underscores the potential of nanoparticle coatings as a viable strategy for seafood preservation, paving the way for future innovations in sustainable food packaging solutions. [ABSTRACT FROM AUTHOR]

Polyhydroxyalkanoates (PHAs) are promising biodegradable polymers known for their biodegradability and eco-friendly properties. Recent studies indicate that PHAs can reduce the environmental impact by up to 50% compared to petroleum-based plastics. This comprehensive review evaluates the application of PHAs in sustainable food packaging, covering over 100 studies published between 2018 and 2023. The review highlights advancements in PHA production, with a focus on submerged and solid-state fermentation methods, achieving up to a 60% improvement in production efficiency through optimized culture selection. Sustainable extraction and purification methods have been identified, reducing energy consumption by 30%. Blending PHAs with other biodegradable polymers like polylactic acid, starch, and cellulose enhances material performance, with up to a 40% improvement in mechanical properties. The incorporation of antimicrobial agents and essential oils has been shown to extend the shelf life by 25% while maintaining food safety standards. This review underscores the potential of active PHA-based packaging in improving the barrier properties by 35% when combined with coatings, positioning PHA as a key material for the future of environmentally responsible and safe food packaging. [ABSTRACT FROM AUTHOR]

Active packaging allows for preserving the properties of food, extending shelf life, and safeguarding food safety through the interaction of their diverse components with the product. The incorporation of essential oils, particularly cinnamon essential oil, as active components is emerging as an increasingly relevant alternative to synthetic additives. This work aims to provide an overview of the application of cinnamon essential oil as a bioactive compound in food packaging. Cinnamon essential oil exhibits a highly variable composition, with cinnamaldehyde standing out as one of the predominant components responsible for the antimicrobial properties. Phenolic compounds, on the other hand, endow the oil with outstanding antioxidant activity. The application of this oil in active packaging, whether in the form of films or coatings, has demonstrated a significant improvement in optical, mechanical, and water vapor barrier properties. Moreover, its ability to inhibit microbial growth and lipid oxidation in the applied foods has been evidenced. However, despite the promising prospects of using essential oils in active packaging for food preservation, detailed regulation is still required for industrial-level implementation. [ABSTRACT FROM AUTHOR]

This study proposes to exploit the in vivo metabolism of two probiotics (Bifidobacterium longum subsp. infantis and Lactobacillus reuteri) which, upon adhesion on a solid surface, form a biofilm able to control the growth of pathogenic and food spoilage bacteria. The results showed that pathogenic cell loads were always lower in presence of biofilm (6.5–7 log CFU/cm2) compared to those observed in its absence. For Escherichia coli O157:H7, a significant decrease (>1–2 logarithmic cycles) was recorded; for Listeria monocytogenes, Staphylococcusaureus, and Salmonella enterica, cell load reductions ranged from 0.5 to 1.5 logarithmic cycles. When tested as active packaging, the biofilm was successfully formed on polypropylene, polyvinyl chloride, greaseproof paper, polyethylene and ceramic; the sessile cellular load ranged from 5.77 log CFU/cm2 (grease-proof paper) to 6.94 log CFU/cm2 (polyethylene, PE). To test the potential for controlling the growth of spoilage microorganisms in food, soft cheeses were produced, inoculated with L.monocytogenes and Pseudomonas fluorescens, wrapped in PE pellicles with pre-formed biofim, packed both in air and under vacuum, and stored at 4 and 15 °C: an effective effect of biofilms in slowing the decay of the microbiological quality was recorded. [ABSTRACT FROM AUTHOR]

The global trend towards conscious consumption plays an important role in consumer preferences regarding both the composition and quality of food and packaging materials, including sustainable ones. The development of biodegradable active packaging materials could reduce both the negative impact on the environment due to a decrease in the use of oil-based plastics and the amount of synthetic preservatives. This review discusses relevant functional additives for improving the bioactivity of biopolymer-based films. Addition of plant, microbial, animal and organic nanoparticles into bio-based films is discussed. Changes in mechanical, transparency, water and oxygen barrier properties are reviewed. Since microbial and oxidative deterioration are the main causes of food spoilage, antimicrobial and antioxidant properties of natural additives are discussed, including perspective ones for the development of biodegradable active packaging. [ABSTRACT FROM AUTHOR]

Packaging and packaging technology constitute a pivotal industry deeply intertwined with our daily lives and prevalent in various settings, including grocery stores, supermarkets, restaurants, and pharmacies. The industry is constantly evolving thanks to technological advances. This article delves into the dynamic landscape of 3D printing in packaging, exploring its profound implications and potential. While this article highlights the advantages of traditional packaging approaches, it also highlights the many benefits of 3D printing technology. It describes how 3D printing enables personalization, rapid prototyping, and low-cost production, streamlining packaging design and manufacturing processes. Offering innovative solutions in design, functionality, and accessibility, the potential of 3D printing in packaging is promising. [ABSTRACT FROM AUTHOR]

In the present study, the combined effect of an AgIon® antimicrobial absorbent (Ζ) pad and a chitosan coating (C) on the preservation of fresh beef stored aerobically at 5 °C was investigated. Microbiological, physicochemical, and sensory attributes were monitored for up to 10 days of storage. The microbiological data indicated that the C and chitosan coating plus absorbent pad (CZ) treatments were the most efficient in reducing total viable counts (TVC) by 4.09 and 3.53 log cfu/g compared to the control W and Z treatments on day 4 of storage (p < 0.05). An analogous reduction in the counts of the other microbial groups monitored was recorded. pH values were ca. 5.7 for treatments W and Z and 5.45 for treatments C and CZ on day 4 of storage (p < 0.05). The total volatile basic nitrogen (TVB-N) values remained <20 mg/100 g for all treatments on day 4 and for treatments C and CZ on day 10 of storage. The total color difference values decreased (p < 0.05) during storage for treatments W and Z, but remained constant for treatments C and CZ. Based on sensory, microbiological and physico-chemical data, beef shelf life was ca ^# + 3 days for samples W and Z and at least 10 + 3 days for samples C and CZ. Between the two antimicrobial treatments, chitosan was considerably more effective than the AgIon® antimicrobial absorbent pad, which showed practically no antimicrobial activity in direct contact with beef meat. [ABSTRACT FROM AUTHOR]

The aim of this work was to develop active packaging based on polypropylene (PP) and polylactic acid (PLA) matrices using a high value by-product extracted from orange peel as an active compound for food packaging applications. Different films with and without orange peel extract (OPE) based on PP and PLA were obtained via cast extrusion and characterized in terms of their mechanical, thermal, optical, and sealing properties. The films obtained were transparent, but when OPE was incorporated, the transmittance spectrum decreased, causing slight coloration. Mechanical properties were affected by the incorporation of OPE, as elongation at break and tensile strength increased in the cross-direction of the PP film, although the main differences found were related to the polymer itself. In addition, sealing strength also increased via the incorporation of OPE in the PP matrix. However, thermal properties were not affected by OPE in the PP matrix but slightly decreased stability in PLA. Regarding antimicrobial activity in in vitro studies, no inhibition of the growth of Listeria innocua, Saccharomyces cerevisiae, Aspergillus niger, or Escherichia coli was observed. Finally, antioxidant activity was observed in in vitro studies with 2,2-Diphenyl-1picrylhydrazyl (DPPH) radical. The results of this study showed that the obtention of materials with OPE incorporated into the PLA and PP matrix is feasible. The new materials obtained can be used for applications of oxidation-sensitive fresh products. [ABSTRACT FROM AUTHOR]

The industrial processing of mandarin fruits yields a large amount of peel waste, resulting in economic losses and environmental pollution. The peels of mandarin fruits are a good source of biomass and active substances that can be used to produce food packaging systems. In this study, active food packaging films were prepared based on sodium alginate and twelve varieties of mandarin peel powder. The structures, properties, and corn oil packaging performance of the films were compared. Results showed that the twelve varieties of mandarin peel powder differed in pectin, lipid, protein, crude fiber, and total phenol contents. The prepared films all exhibited a yellow color, 117.73–152.45 μm thickness, 16.39–23.62% moisture content, 26.03–90.75° water contact angle, 5.38–8.31 × 10−11 g m−1 s−1 Pa−1 water vapor permeability, 5.26–12.91 × 10−20 m2 s−1 Pa−1 oxygen permeability, 4.87–7.90 MPa tensile strength, and 13.37–24.62% elongation at break. Notably, the films containing mandarin peel powder with high pectin and lipid contents showed high moisture/oxygen barrier ability and mechanical properties. The films containing mandarin peel powder with high total phenol content exhibited high antioxidant- and antimicrobial-releasing abilities and good performance in delaying corn oil oxidation. Overall, the results suggested that the films have good application potential in active food packaging. [ABSTRACT FROM AUTHOR]

Nowadays, increased food safety and decreased food waste are two of the major global interests. Self-healable active packaging materials are an attractive option to achieve such targets. This property is critical for the hygiene and the consumption appropriateness of the food. Polylactic acid is a very promising polymeric matrix that potentially could replace the widely used low-density polyethylene due to its biobased origin and its easy biodegradable nature. The main drawback of this polymeric matrix is its brittle, fragile nature. On the other hand, tetraethyl citrate is a biobased approved food additive which became an attractive option as a plasticizer for industries seeking alternative materials to replace the traditional petrochemically derived compounds. A novel biobased film exhibiting self-healing behavior suitable for food-active packaging was developed during this study. Polylactic acid's brittleness was reduced drastically by incorporating tetraethyl citrate, and a random cut on the original self-repairing film was fully healed after 120 s. The optimum concentration of tetraethyl citrate in the polylactic acid was around 15% v/w with a water/oxygen barrier close to the relevant of polylactic acid and low migration. According to the EC50 parameter, the antioxidant activity was 300% higher than the relevant of pure polylactic acid, while according to the thiobarbituric acid and heme iron parameters, the film resisted lipid oxidation and deterioration. Finally, the total viable count parameter indicates the strong antimicrobial activity of this sample. [ABSTRACT FROM AUTHOR]

The use of natural raw substances for food preservation could provide a great contribution to food waste reduction, circular economy enhancement, and green process application widening. Recent studies indicated that the use of porous materials as adsorbents for natural essential oils provided nanohybrids with excellent antioxidant and antimicrobial properties. Following this trend in this work, a thymol oil (TEO) rich SBA-15 nanohybrid was prepared and characterized physiochemically with various techniques. This TEO@SBA-15 nanohybrid, along with the pure SBA-15, was extruded with low-density polyethylene (LDPE) to develop novel active packaging films. Results indicated that TEO loading was higher than other porous materials reported recently, and the addition of both pure SBA-15 and TEO@SBA-15 to the LDPE increased the water/oxygen barrier. The film with the higher thyme-oil@SBA-15 nanohybrid content exhibited a slower release kinetic. The antioxidant activity of the final films ignited after 48 h, was in the range of 60–70%, and was almost constant for 7 days. Finally, all tests indicated a sufficient improvement by the addition of thyme-oil@SBA-15 nanohybrids in the pure LDPE matrix and the concentration of wt. 10% of such nanocarriers provided the optimum final LDPE/10TEO@SBE-15 active packaging film. This material could be a potential future product for active packaging applications. [ABSTRACT FROM AUTHOR]

The goal of this study was to analyze the antifungal and antiviral activity of coatings based on Formitopsis betulina, Verbascum L. and Uncaria tomentosa extracts with ZnO nanoparticles as active compounds. The other purpose was to investigate the impact of polypropylene bags coated with the obtained antiviral/antifungal coatings on the microbial quality/purity of strawberries. The results of this study showed that the analyzed coatings inhibited Candida albicans growth completely. They did not inhibit the growth of Fusarium oxysporum, but they decreased its number. Additionally, all layers demonstrated a high activity against the Φ 6 bacteriophage particles. Analyzing the microbial purity of the strawberries after storage, it was noticed that the modified bags with Verbascum L. (ZnVL) and F. betulina (ZnFb) extracts and the addition of the nano ZnO had a significant effect on the decrease of the total count and on the number of yeast and mold. After 144 h of storage of the strawberries, the ZnVL coating was found to be more effective than the ZnFb layer. However, after 216 h of storage, ZnVL was more active against yeast and mold, but the packaging covered with the ZnFb coating was more effective against bacteria. [ABSTRACT FROM AUTHOR]

Our study aimed to assess the impact of active packaging with pomegranate peel extract (0.06 mg gallic acid eq./cm2) and/or high-pressure treatment (600 MPa, 7 min) on the instrumental color, lipid, and protein oxidation of Iberian dry loins formulated with reduced nitrate/nitrite levels (0, 37.5, and 150 mg/kg) during 100-day refrigerated storage (4 °C). CIE L*a*b* coordinates were measured, and malondialdehyde, carbonyls, and free thiol contents served as markers for lipid and protein oxidation. Active packaging lowered CIE L* (35.4 vs. 34.1) and a* (15.5 vs. 14.5) and increased yellowness (15.6 vs. 16.3) and hue (45.2 vs. 48.4), while pressurization increased CIE L* (33.1 vs. 36.3) and diminished a* values (16.1 vs. 13.9). Ongoing nitrate/nitrite amounts significantly influenced lipid peroxidation, protein carbonyl formation, and free thiol loss. Active packaging and high-pressure processing had varying effects on carbonyl and thiol contents. Neither pressurization nor active packaging impacted malondialdehyde formation. Pressurization enhanced the formation of 4-HNE (503 vs. 697 pg/g). Protein oxidation proved more sensitive to changes, with active packaging offering protection against protein carbonylation (15.4 vs. 14.7 nmol carbonyls/mg protein), while pressurization induced thiol loss (34.3 vs. 28.0 nmol Cys eq./mg protein). This comprehensive understanding provides essential insights for the meat industry, emphasizing the necessity for customized processing conditions to enhance color stability, lipid preservation, and protein integrity in dry-cured loin slices. [ABSTRACT FROM AUTHOR]

Mushrooms support the Irish economy, with a farm gate value of roughly EUR 130 million in 2022 and with 80%–85% of Irish production exported to the United Kingdom. In order to apply cutting edge technologies and offer creative solutions to increase the shelf life of mushrooms, it is essential to understand the mechanisms of action and preservation effects of the current trends in edible mushroom packaging systems. This review summarises the mechanisms of action for nanopackaging, biodegradable packaging, edible coatings, modified atmosphere packaging (MAP), and active packaging in terms of their enzyme activity, antimicrobial activity, antioxidant activity, and rate of respiration along with the changes in texture, colour, nutritional value, and shelf life of mushrooms reflected in the preservation effects of these packaging systems. SWOT analysis highlights the strengths, weaknesses, and threats of these packaging systems and provides potential opportunities for trialing innovative packaging materials for fresh edible mushrooms in Ireland. [ABSTRACT FROM AUTHOR]

Market implementation of active and intelligent packaging (AIP) technologies specifically for fiber-based food packaging can be hindered by various factors. This paper highlights those from a social, economic, environmental, and legislative point of view, and elaborates upon the following aspects mainly related to interactions among food packaging value chain stakeholders: (i) market drivers that affect developments, (ii) the gap between science and industry, (iii) the gap between legislation and practice, (iv) cooperation between the producing stakeholders within the value chain, and (v) the gap between the industry and consumers. We perceive these as the most influential aspects in successful market implementation at a socioeconomic level. The findings are supported by results from quantitative studies analyzing consumer buying expectations about active and intelligent packaging (value perception of packaging functions, intentions to purchase AIP, and willingness to pay more) executed in 16 European countries. Finally, in this paper, we discuss approaches that could direct future activities in the field towards industrial implementation. [ABSTRACT FROM AUTHOR]

This research reports about the development by electrospinning of fiber-based films made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from fermented fruit waste, so-called bio-papers, with enhanced antimicrobial performance. To this end, different combinations of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were added to PHBV solutions and electrospun into mats that were, thereafter, converted into homogeneous and continuous films of ~130 μm. The morphology, optical, thermal, mechanical properties, crystallinity, and migration into food simulants of the resultant PHBV-based bio-papers were evaluated and their antimicrobial properties were assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in both open and closed systems. It was observed that the antimicrobial activity decreased after 15 days due to the release of the volatile compounds, whereas the bio-papers filled with ZnONPs showed high antimicrobial activity for up to 48 days. The electrospun PHBV biopapers containing 2.5 wt% OEO + 2.25 wt% ZnONPs successfully provided the most optimal activity for short and long periods against both bacteria. [ABSTRACT FROM AUTHOR]

According to the Codex Alimentarius, a food additive is any substance that is incorporated into a food solely for technological or organoleptic purposes during the production of that food. Food additives can be of synthetic or natural origin. Several scientific evidence (in vitro studies and epidemiological studies like the controversial Southampton study published in 2007) have pointed out that several synthetic additives may lead to health issues for consumers. In that sense, the actual consumer searches for "Clean Label" foods with ingredient lists clean of coded additives, which are rejected by the actual consumer, highlighting the need to distinguish synthetic and natural codded additives from the ingredient lists. However, this natural approach must focus on an integrated vision of the replacement of chemical substances from the food ingredients, food contact materials (packaging), and their application on the final product. Hence, natural plant alternatives are hereby presented, analyzing their potential success in replacing common synthetic emulsifiers, colorants, flavorings, inhibitors of quality-degrading enzymes, antimicrobials, and antioxidants. In addition, the need for a complete absence of chemical additive migration to the food is approached through the use of plant-origin bioactive compounds (e.g., plant essential oils) incorporated in active packaging. [ABSTRACT FROM AUTHOR]

Active packaging with biobased polymers aim to extend the shelf life of food and to improve the environmental sustainability of the food industry. This new concept was tested with samples of fresh poultry meat wrapped with chitosan reinforced with 2.5% of commercial nanocellulose (NC) incorporating 1% of essential oils (EO) from Aloysia citrodora (ACEO) and Cymbopogon citratus (CCEO). The performance of the bionanocomposites containing EOs was assessed and compared with unwrapped meat samples and samples wrapped with chitosan/NC, during a 13 day period of refrigerated storage for several physicochemical parameters related to food deterioration and microbial growth. Wrapping the meat with the chitosan/NC polymer helped to increase the shelf life of the meat. The incorporation of EOs added extra activity to the biocomposites, further delaying the meat deterioration process, by halting the lipid oxidation and the Enterobactereaceae growth until the 9th day. The composition of both EOs was similar, with the main components contributing to the increased activity of the biopolymers being geranial and neral. The performance of ACEO surpassed that of CCEO, namely on the Enterobactereaceae growth. This trend may be associated with ACEO's higher phenolic content and the higher antioxidant activity of the compounds released by the ACEO biopolymers. [ABSTRACT FROM AUTHOR]

The fisheries industry encounters distinct packaging challenges, including the need to protect perishable seafood from rapid spoilage caused by UV radiation while allowing for reuse. This study tackles these issues by introducing advanced high-density polyethylene (HDPE) composites enhanced with a UV stabilizer and inorganic fillers, such as diatomaceous earth/zinc oxide (DZ). Our investigation explores the transformative effects of weathering on these pioneering composites, evaluating shifts in mechanical, physical, thermal properties, and sub-zero temperature stability. Incorporating a UV stabilizer alongside DZ within the HDPE matrix significantly enhances mechanical performance and weathering resilience. These enhancements extend the longevity of seafood packaging while preserving product quality. Moreover, our findings reveal a substantial breakthrough in antimicrobial properties. The inclusion of DZ, with or without a UV stabilizer, results in an impressive up to 99% enhancement in antibacterial activity against both Gram-positive and Gram-negative bacteria. This discovery not only bolsters the protective attributes of HDPE packaging but also presents a compelling case for the development of active packaging materials derived from DE/ZnO composites. This study bridges the gap between packaging and seafood quality, introducing advanced polymeric packaging technology for seafood products. It highlights the mutually beneficial link between packaging improvements and ensuring seafood quality, meeting industry needs while promoting sustainability. [ABSTRACT FROM AUTHOR]

This manuscript concerned customer recognition of biodegradable packaging. The authors of this study took up this issue due to its topicality and importance for enterprises and customers. The authors conducted a survey among consumers that showed how customers perceived 100% biodegradable packaging. It explored the role of these packages in marketing activities in the organic products market. The purpose of this article was to determine customer awareness of 100% biodegradable packaging. A diagnostic survey with a sample of 1000 respondents was used. The survey results indicated that customers declared environmentally friendly attitudes; however, they were not always able to recognize biodegradable packaging. Providing correct answers on this topic did not depend on gender, health status, or place of residence, only on the age and education of respondents. The research results may have both practical and theoretical implications. The results contribute to the development of management sciences. The conclusions from the manuscript allow producers, not only in food, to design new, biodegradable packaging in accordance with the feelings and expectations of consumers. Thus, it can contribute to increasing the demand for products in ecological packaging. [ABSTRACT FROM AUTHOR]

Microbial surface contamination of the cooked ham sliced by shop assistants has an influence on its potential secondary shelf-life. Active packaging may be the solution. The first goal of the work was to obtain coatings based on Formitopsis betulina and Uncaria tomentosa extracts (separately), with the addition of nanoparticles of ZnO (as a synergetic agent to increase plant extracts' antimicrobial effectiveness), that could be active against selected bacterial strains. Another aim of the work was to determine the influence of obtained active layers on microbial purity and texture of the samples. The results of the study demonstrated that the layers containing F. betulina or U. tomentosa extracts with the addition of ZnO nanoparticles inhibited Staphylococcus aureus, Bacillus atrophaeus, and Escherichia coli growth completely and decreased the number of Pseudomonas syringae cells. Analyzing microbial purity of sliced cooked ham portions after storage, it was observed that the active packaging based on U. tomentosa extracts had a greater influence on the total count than the coatings containing F. betulina extracts and that both active packaging materials affected the microbial purity of the cooked ham. Analyzing the textural parameter changes after 48 h of storage, a decrease in the gumminess, chewiness and cohesiveness values was noted, but only for the ham portions stored in bags covered with the coating based on U. tomentosa. The effectiveness of the active packaging on textural parameters after 96 h of storage was not noticed. [ABSTRACT FROM AUTHOR]