Search

Rivers adjacent to industrial zones usually suffer from severe pollution issues. Industrial wastewater that has undergone sewage treatment processes may be legally discharged into rivers under water quality permits. Previous studies have frequently employed isotopic tracers to identify potential contaminants for pollution control. Conventional radiogenic isotopes utilized in tracing studies cannot discern whether the source is untreated (primary) industrial wastewater, which can have serious impact to the environment. By analyzing the iron (Fe) and molybdenum (Mo) isotopic compositions in original industrial wastewater and treated effluent, this study aims to investigate whether the heavily polluted Agongdian River is contaminated by the untreated wastewater. Based on the results from this study, the original industrial wastewater exhibits higher concentrations of metallic elements and heavier Fe and lighter Mo isotopic compositions, compared to the treated effluent. Consequently, it appears that Agongdian River water indeed exhibits evidence of untreated industrial wastewater. Furthermore, the volume of original industrial wastewater entering the river can be estimated from these results. This research offers a more precise and accurate approach to monitor potential industrial wastewater pollution in natural water bodies, contributing to the goal of environmental protection and sustainable development. [ABSTRACT FROM AUTHOR]

Industrial sludge continues to increase in quantity with the development of industry. Therefore, how to effectively treat industrial sludge continues to be an environmental focus around the world. Due to the high calorie content of industrial sludge in Taiwan, most of the sludge is incinerated for simplicity and convenience. However, this incineration causes environmental pollution and cannot effectively reuse the industrial sludge. In this study, we investigated the feasibility of lightweight aggregates produced from water treatment sludge (WTS) mixed with industrial sludge. The industrial sludge was obtained from three industrial zones in Taiwan. The lightweight aggregate materials were prepared by mixing WTS with 7.5%, 15.0%, or 22.5% of industrial sludge as a secondary ingredient. The chemical composition analyses revealed that the ternary phase diagrams of the chemical components were within the range recommended by C.M. Moreover, Riley indicated that the ingredients could expand. The sintering experiments were conducted in two stages. Stage I served to determine the optimal sintering temperature, while Stage II produced lightweight aggregates at the optimal sintering temperatures after 5, 10, or 15 min of preheating. The results indicated that an increase in preheating time increased the particle density of the lightweight aggregates but decreased the water absorption ratio, because increasing preheating time causes more gases to escape, resulting in aggregates that could not produce sufficient gas to support expansion during the sintering stage. The sintering results of the lightweight aggregates showed that their particle density was between 0.5 and 1.4 g/cm3, which met the requirements of the specification. Their water absorption rate was below 21%, which was roughly in line with the recommendations of the specification. When the amount of industrial sludge added was less than 22.5%, the lightweight aggregate was sintered successfully, which is suitable for engineering applications. The industrial sludge experienced a loss of between 50% and 70% on ignition, resulting in pores and cracks that were observed on the surfaces of the lightweight aggregate. Based on the energy required to sinter lightweight aggregates, a greater loss on ignition indicates the conversion of more materials into heat energy. Therefore, the use of industrial sludge in lightweight aggregates not only provides ways to reuse industrial sewage waste but also reduces the consumption requirements for sintering lightweight aggregates, thereby achieving energy-saving and carbon-reduction goals. [ABSTRACT FROM AUTHOR]

With recent increases in environmental awareness, the circular economy concept, which involves turning waste into usable products, has gradually become widely accepted. Spent mushroom substrate (SMS) is an agricultural waste that lacks recycling channels in Taiwan. This study explored the feasibility of simultaneously recycling two completely different types of waste: spent mushroom substrate (SMS), an agricultural waste, and electric-arc furnace dust (EAFD), an industrial waste. Specifically, SMS was used to replace metallurgical coke as a reducing agent for EAFD, which underwent carbothermic reduction to recycle valuable metallic Zn. The results showed that if SMS and EAFD were mixed at a C/O ratio of 0.8, the degree of Zn removal achieved 95% at 1100 °C, which is 150 °C lower than the reduction temperature of the EAFD-coke mixture (due to volatile matter (VM) in SMS). For the reduction of ZnO in EAFD, with the assistance of VM in SMS, the C/O ratio can be decreased from 0.8 to 0.16 at 1300 °C, achieving a high degree of Zn removal over 95%. In addition, the torrefaction of SMS increased the fixed carbon content and improved the Zn productivity at the same C/O ratio, reaching almost the same productivity as the coke sample (SMS torrefaction = 500 °C, C/O = 0.8, reduction = 1200 °C, Zn removal~99%). Finally, CO2 emission reductions from the use of SMS were also estimated. [ABSTRACT FROM AUTHOR]

Growing concern about circular bioeconomy and sustainable development goals (SDGs) for the valorization of food waste has raised public awareness since 2015. Therefore, the present study focused on the promotion policies and regulatory measures for the valorization of mandatory recyclable food waste from industrial sources in Taiwan, including the animal/plant production farms and food-processing plants. According to the official data on the annual statistics during the period of 2015–2019, it showed that the food waste from alcoholic beverage manufacturers (i.e., lees, dregs, or alcohol mash) and oyster farms (i.e., waste oyster shell) accounted for about half (about 250,000 metric ton) of industrial food waste generation in Taiwan. In order to effectively reduce the burdens on incinerators/landfills and their environmental impacts, the central governing agencies jointly promulgated some regulatory measures for promoting the production of biobased products from the industrial food waste valorization like animal feed, soil fertilizer, and bioenergy. These relevant acts include the Waste Management Act, the Fertilizer Management Act, the Feed Management Act, and the Renewable Energy Development Act. In addition, an official plan for building the food waste bioenergy plants at local governments via anaerobic digestion process, which was estimated to be completed by 2024, was addressed as a case study to discuss their environmental and economic benefits. [ABSTRACT FROM AUTHOR]

Incineration is the most important technology for treating municipal solid waste (MSW) and industrial waste in Taiwan. Currently, there are 24 large-scale MSW incineration plants operated to generate about 1.2 million metric tons of residual ash (mostly bottom ash) based on approximately 6.5 million metric tons of waste incinerated yearly. To reduce the depletion of non-renewable resources under the circular economy principle, the recycling of MSW incineration bottom ash (IBA) as recycled aggregate in concrete and construction applications has been progressed in recent years around the world. According to the official database, the trend analysis of MSW generation and treatment, electricity power and IBA generation from the MSW incineration plants over the past decade (2010–2019) was performed in this work. It showed an increased power generation, growing from 0.485 kWh/kg in 2010 to 0.530 kWh/kg in 2019. In 2019, 2738 GWh of power was sold to Taipower (one of the state-owned companies in Taiwan) for electricity grid connection, gaining income of about NT$ 5,089,383,000 (≈US$ 172,520,000) at an average rate of 1.86 NT$/kWh (0.063 US$/kWh). On the other hand, the ratios of incineration bottom ash (IBA) generation to refuse incinerated indicated a decreasing trend due to the increased operation efficiencies of MSW incineration plants. Based on the revised regulations implemented on 18 May 2020, the regulatory measures for promoting IBA recycling in Taiwan were promulgated to valorize it for the production of recycled aggregate under rigorous requirements for prevent it from polluting the environment. [ABSTRACT FROM AUTHOR]

As the second-largest city in Taiwan, the Kaohsiung municipality has faced serious environmental loadings in recent decades. Among them, waste management is a key issue because of large amount of urban and industrial waste produced daily. In this regard, waste-to-energy (WTE) systems adopting the best available control technology for air pollution is a win-win approach because it also generates electricity to mitigate the dependence on imported fossil fuels and the greenhouse gas emissions incidentally. In this work, the updated status of municipal solid waste (MSW) and WTE plants in Kaohsiung were analyzed to get the crux based on the official database. Using the operational data on the WTE plants over recent years (2003–2018), the analysis of operational efficiencies for the four WTE plants in Kaohsiung was addressed in the paper. It showed that their operational efficiencies, ranging from 0.287 to 0.568 kW-h/kg, indicated an approximate "bathtub curve" pattern. In addition, analyzing the project for revamping the Gangshan WTE plant showed a significant progress in operational efficiencies with a significant increase from 0.506 kW-h/kg in 2016 to 0.587 kW-h/kg in 2018. Finally, some recommendations on technological measures and regulatory incentives for upgrading the operational efficiencies of existing WTE plants were addressed in the work. [ABSTRACT FROM AUTHOR]