Search

Cannabis (Cannabis sativa) is a versatile crop belonging to the Cannabaceae family, and is dioecious, typically with separate male and female plants. The flowers of female plants, especially the trichomes, accumulate relatively higher contents of cannabinoids compared with those of male plants. For this reason, to obtain seeds that are genetically female, it is desirable to induce the development of male flowers on a female plant that produces genetically female haploid gametes. Silver thiosulfate (STS) is a highly effective chemical for male flower induction. We investigated male flower induction in three commercial cultivars of female cannabis (Spectrum303, SuperwomanS1, and CBGambit) regarding the treatment frequency, stage of application, and concentration of STS applied as a foliar spray. All three cultivars showed adequate induction of male flowers in response to 1.5 mM STS applied at the early reproductive stage. In particular, SuperwomanS1 was most highly responsive to induction of male flowers, even when treated with 0.3 mM STS at the early reproductive stage. Treatment with three applications of STS was more effective compared with a single application, but a single application of 1.5 mM STS at the early reproductive stage was sufficient for male flower induction. A single STS application during the middle stage of reproductive growth was inadequate for induction of male flowers. However, 6 weeks after three applications of STS, CBGambit exhibited approximately 54% male flower induction at 0.3 mM STS, Spectrum303 showed approximately 56% induction at 3 mM STS, and SuperwomanS1 yielded approximately 26% induction at 1.5 mM (expressed as percentage of total number of individuals with the induced male flowers). Pollen stainability tests using KI-I2 solution and Alexander's staining showed high pollen viability with over 65% at different single STS concentrations, indicating that pollen grains induced by STS have sufficient viability for the self-pollination. This study demonstrated that different cultivars of cannabis respond diversely to different STS concentrations and highlighted the potential benefits of three STS applications during the middle reproductive stage for cannabis breeding. [ABSTRACT FROM AUTHOR]

Fig types such as "Smyrna" and "San Pedro" require pollination (called caprification in fig cultivation) to produce a commercial crop, based on the crop and pollination characteristics of figs. Caprification is the process of hanging caprifig (male fig) fruits on female fig trees to ensure the transfer of pollen from the female fig to the caprifig by a wasp (Blastophaga psenes) that lives within the caprifig. It is necessary to extend the caprification period by using caprifig genotypes that ripen at different times, as female fig fruits ripen gradually. However, as caprifigs may not be continuously available for pollinating female figs, storing suitable caprifigs is necessary. The aim of this study was to assess changes in Blastophaga psenes, the duration of Blastophaga's exit, and the viability of pollen from caprifigs of different genotypes (16 08 05, 16 08 09, 16 08 10, 16 09 10, and 16 ZF 08) stored for caprification. These stored caprifig genotypes were subsequently used for pollination three times at 8-day intervals, after which their impact on the set and quality of the edible fig fruits was evaluated. According to the average data, at the end of storage, the least B. psenes loss was obtained from the 16 08 05 (61.03%) genotype, and the highest was obtained from the 16 09 10 (67.00%) genotype. Pollen germination tended to increase with the storage of caprifig fruits, but this increase was not linear. After storage, the 16 08 09 and 16 09 10 genotypes exhibited greater pollen germination. The highest fruit set and quality were obtained when the 16 08 09 and 16 09 10 genotypes were used as pollen sources. Furthermore, since the 16 08 10 genotype is the latest ripening caprifig genotype, it has been determined that it can pollinate late-ripening "Bursa Siyahı" fruits. Principal component and path analysis demonstrated that pollen viability and germination rate were crucial in selecting caprifig genotypes for fruit set and quality. [ABSTRACT FROM AUTHOR]

Aquilaria sinensis (Lour.) Spreng is a known medicinal plant producing agarwood. To date, studies on the floral biology of A. sinensis have been limited. In this study, the floral micro- and ultra-structures, pollen viability, stigma receptivity, and artificial pollination of A. sinensis were investigated. The results show that the flower's development can be divided into five stages, including the flower bud differentiation stage (2–7 d), the flower bud stage (7–13 d), the flowering stage (14 d), the pollination stage (14–15 d), and the fruiting stage (15–25 d). The floral organs mainly include: 4–6 split calyces, 10 petals, 10 stamens, and 1 pistil. The anther is oblong, with four pollen sacs the pollen is round, with maximum viability 6 h after flowering; and stigma receptivity is at its best 6 h before flowering. Artificial pollination is successful in the field. These findings will provide useful information for producing and breeding A. sinensis. [ABSTRACT FROM AUTHOR]

Cannabis sativa L. is cultivated globally for its cannabinoid-dense inflorescences. Commercial preference for sinsemilla has led to the development of methods for producing feminized seeds through cross-pollination of cosexual (masculinized) female plants. Although the induction of cosexuality in Cannabis plants is common, to date, no work has empirically tested how masculinization of female Cannabis plants impacts male flowering, pollen production, pollen fitness, and related life-history trade-offs. Here, we cultivated a population of Cannabis plants (CFX-2) and explored how the route to cosexuality (drought vs. chemical induction) impacted flowering phenology, pollen production, and pollen fitness, relative to unsexual male plants. Unisexual males flowered earlier and longer than cosexual plants and produced 223% more total pollen (F2,28 = 74.41, p < 0.001), but per-flower pollen production did not differ across reproductive phenotypes (F2,21 = 0.887, p = 0.427). Pollen viability was 200% higher in unisexual males and drought-induced cosexuals (F2,36 = 189.70, p < 0.001). Pollen non-abortion rates only differed in a marginally significant way across reproductive phenotypes (F2,36 = 3.00, p = 0.06). Here, we demonstrate that masculinization of female plants impacts whole-plant pollen production and pollen fitness in Cannabis sativa. [ABSTRACT FROM AUTHOR]

Intergeneric and interspecific hybridization has been employed for the breeding of Phalaenopsis to transfer desirable traits between species, producing novel phenotypes with improved size, color, form, and flower-bearing ability. These characteristics are often enhanced; however, many of these hybrids are triploids and have reduced or complete sterility, for example, Phalaenopsis Queen Beer 'Mantefon', an important novelty-type cultivar in Asia, particularly in China, Japan, and Republic of Korea. Despite the increasing demand for the crop for ornamental purposes, little is known about its cytogenetics, which is essential for breeding and, consequently, crop improvement. In this study, karyotyping using fluorescence in situ hybridization, meiotic chromosome behavior analysis, pollen staining, and in vitro viability germination tests were performed to understand the cause of hybrid sterility and pollen abnormality in Phalaenopsis Queen Beer 'Mantefon' from a cytogenetic perspective. Viability tests revealed pollen infertility at all flower developmental stages, confirmed by the absence of pollen tube growth. Aberrant chromosomal behavior was observed in pollen mother cells (PMCs), frequently forming univalents, chromosomal bridges, and laggards during the entire meiotic process. PMCs were also divided irregularly into sporads with varying numbers of micronuclei, which may be responsible for pollen sterility in this cultivar. Altogether, the cytogenetic analyses provided insights into the pollen development of Phalaenopsis Queen Beer 'Mantefon' and the conceivable causes of its infertility. [ABSTRACT FROM AUTHOR]

The common bean (Phaseolus vulgaris L.) is an important nutritional source globally but is sensitive to high temperatures and thus particularly vulnerable to climate change. Derived from a breeding program at CIAT (Colombia), a heat-tolerant breeding line, named heat-tolerant Andean-type 4 (HTA4), was developed by a series of crosses of parents with a small-bean tepary genotype (Phaseolus acutifolius L.) in their pedigree, which might be the donor of heat stress (HS) tolerance. Importantly, in HTA4, the large, commercially desirable Andean-type beans was restored. To assess underlying tolerance mechanisms, HTA4, together with a heat-sensitive Colombian variety (Calima), was exposed to HS (31 °C/24 °C HS vs. 26 °C/19 °C day/night) under controlled environment conditions. Vegetative growth and photosynthetic performance were not negatively impacted by HS in either genotype, although senescence was delayed in Calima. HS during the reproductive stage caused an increase in pod number in Calima but with few fully developed seeds and many pods aborted and/or abscised. In contrast, HTA4 maintained a similar filled pod number under HS and a higher seed weight per plant. Pollen showed high sterility in Calima, with many non-viable pollen grains (24.9% viability compared to 98.4% in control) with a thicker exine and fewer starch granules under HS. Calima pollen failed to adhere to the stigma and germinate under HS. In HTA4, pollen viability was significantly higher than in Calima (71.1% viability compared to 95.4% under control), and pollen successfully germinated and formed pollen tubes in the style under HS. It is concluded that HTA4 is heat tolerant and maintains a high level of reproductive output due to its ability to produce healthy pollen that is able to adhere to the stigma. [ABSTRACT FROM AUTHOR]

Paeonia ostii is an important woody oil crop mainly cross-pollinated. However, the low yield has become an important factor restricting the industrial development of P. ostii. Cross-pollination has become one of the important measures to increase the seed yield. Therefore, conservation of pollen with high vitality is crucial to ensure successful pollination of P. ostii. In this study, we found an effective methodological system to assess the viability, ability to germinate, and optimal storage conditions of P. ostii pollen grains. The optimal medium in vitro was 50 g/L sucrose, 100 mg/L boric acid, 50 g/L PEG6000, 100 mg/L potassium nitrate, 300 mg/L calcium nitrate, and 200 mg/L magnesium sulfate at pH 5.4. Optimal germination condition in vitro was achieved at 25 °C for 120 min, allowing easy observation of the germination percentage and length of the pollen tubes. In addition, the viability of pollen grains was assessed by comparing nine staining methods. Among them, MTT, TTC, benzidine-H2O2, and FDA were effective to distinguish between viable and non-viable pollen, and the results of the FDA staining method were similar to the pollen germination percentage in vitro. After evaluation of pollen storage, thawing and rehydration experiments showed that thawing at 4 °C for 30 min and rehydration at 25 °C for 30 min increased the germination percentage of pollen grains stored at low temperatures. The low-temperature storage experiments showed that 4 °C was suitable for short-term storage of P. ostii pollen grains, while −80 °C was suitable for long-term storage. This is the first report on the in vitro germination, viability tests, and storage of P. ostii pollen grains, which will provide useful information for P. ostii germplasm conservation and artificial pollination. [ABSTRACT FROM AUTHOR]

In order to provide early selection indicators for the breeding of plants used for producing tea seed oil or harvesting tea, we investigated the relationships between flower morphology and fruit yields in tea plants. We analyzed 106 tea varieties to determine the relationships between flower morphological traits and fruit yields. Notably, the homogeneity of flower traits within the same tea plant variety was found to be very high. The average length and width measurements of certain phenotypic traits of tea plants, including pistil length, stamen length, stamen bundle inner width, stamen bundle outer width, and stigma width, were 11.8, 10.9, 2.5, 15.0, 3.7 mm, respectively. In this study, the flower traits that affect fruit yield appear to be related to the difficulty of pollination by insects (e.g., bees), in terms of their contacting the stigma. In 2013, three phenotypic trait variables showed significant effects on yield; namely, the stamen bundle outer width (negative), stigma width (positive), and stigma width minus the stamen bundle inner width (positive). In 2015, only the stamen bundle outer width had a significant negative effect on yield. Regarding pollen viability, in the TTC (2,3,5-triphenyl tetrazolium chloride) staining test, about 84% of the considered tea varieties presented pollen viability exceeding 70%. This indicates that most tea pollen has the ability to germinate normally after contact with the cross-pollinated stigma. The yields of all of the tea varieties exhibited a positively skewed distribution in 2013 and 2015. Although our results indicate that flowers in the anther superior group tend to produce fewer fruits than flowers in the stigma superior group in 2013, in the analysis of the effect of traits on yield, there were no significant differences in the relative positions of stigmas and anthers. In conclusion, we determined that the main trait affecting fruit yield is stamen bundle outer width, while the secondary trait affecting fruit yield is stigma width. However, the efficacy of the stigma width may also be affected by the position of the stigma relative to the anther and the stamen bundle inner width. These two traits have the potential to be used as reference indicators for early selection in future breeding programs. [ABSTRACT FROM AUTHOR]

Caprification is the process of hanging caprifig fruits on edible fig trees to transfer the pollen inside the caprifig to the edible fig via the wasp (Blastophaga psenes) living in the caprifig. It needs to be repeated several times for the proper fruit set of edible figs. The present study was conducted to determine the change in the number of Blastophaga psenes, the duration of Blastophaga's exit, and pollen viability in case the caprifigs to be used in the caprification process are stored until use. The number of Blastophaga and in vitro pollen viability were tested at day 0 (harvest day) and after 4, 8, 12, 16 and 20 days of storage at three different temperatures (0, 4, and 8 °C). Afterwards, the effect of pollination frequency on the edible fig fruit set and quality was determined by using Blastophaga psenes as a vector in the pollination of stored caprifig fruits, pollinating five times with 4-day intervals and three times with 8-day intervals. Approximately a 50% reduction in the number of B. psenes was detected after 4 (180.22), 12 (174.11) and 16 (192.66) days of caprifigs storage at 0, 4, and 8 °C, respectively. The pollen germination percentage of the caprifigs increased with storage and was higher in those stored at 8 °C (43.96%) and 4 °C (41.70%). The highest fruit set was obtained when the caprifigs stored at 4 °C (76.41%) and 8 °C (71.38%) five times with 4-day intervals were used for pollination. The pollination practice repeated five times with 4-day intervals resulted in a lower proportion of extra-large fruits with a weight of >100 g, a higher proportion of fruits with no or slight ostiole damage and early ripening of fruits. These results suggest that B. psenes and pollen viability can be preserved by storing caprifigs at 4 or 8 °C and that fruit set and fruit characteristics would be positively affected with the use of stored caprifigs in the pollination practice repeated five times with 4-day intervals. [ABSTRACT FROM AUTHOR]

Extending the range of Osmanthus species into more cold-hardy climates would open new opportunities for adoption and use of these species by growers, landscapers, and the public. Breeding improvement is hindered by few available cultivars and a lack of female or perfect flowers. The objectives of this study were to evaluate floral morphology and pollination biology of Osmanthus species available in the U.S. market. Thirty-three genotypes representing four species were evaluated in McMinnville, TN, USA for genome size, floral morphology, pollen viability, and self- and cross-compatibility. All genotypes were diploid with 2C genome sizes ranging from 2.89 to 3.21 pg. Perfect flowers were observed in all O. armatus and 82% of O. heterophyllus genotypes. All observed O. fortunei and O. fragrans genotypes had male-only flowers. Pollen viability based on staining and in vitro germination ranged from 8% to 98% and 6% to 53%, respectively. Pollen germination was observed on stigmas of 94.2% of O. armatus and O. heterophyllus flowers collected 24 hours after cross- or self-pollination. There was a significant association between cross type and percentage of flowers with pollen tubes reaching the ovaries; after 72 h, pollen tubes had reached the ovaries of in 67% of intraspecific crosses, 78% of interspecific crosses, and 0% of self crosses (χ2 = 26.5, p < 0.001). This study provides evidence of a self-incompatibility system in O. armatus and O. heterophyllus and provides insights into opportunities and challenges for Osmanthus hybrid breeding. [ABSTRACT FROM AUTHOR]

Heat stress negatively affects pollination, fertilization, and consequently, the development of strawberry fruits. It was proved that foliar application of titanium organic complex improved pollination and fertilization processes of some plant species, which resulted in better fruit development. Therefore, a three-year experiment was designed to determine the effect of the titanium organic complex on pollination and fertilization processes and consequently on fruit development of three remontant strawberry cultivars grown under canopies, under conditions of high temperature. The experiment demonstrated that high temperature disrupted the flowering physiology of strawberry. Under such conditions, the viability and germination of pollen as well as the receptivity of stigma were significantly reduced. The application of titanium organic complex during flowering had a beneficial effect on the pollination and fertilization processes of strawberries. Plants treated with the titanium organic complex were characterized by higher pollen viability, better pollen germination, a higher number of achenes in fruit, and a higher weight of individual fruit, compared to the not treated plants. The obtained results suggest that application of titanium organic complex during flowering may alleviate the stress caused by high temperature and contribute to the improvement of the quantity and quality of a crop. [ABSTRACT FROM AUTHOR]

Reproductive-stage heat stress (RSHS) poses a major constraint to cereal crop production by damaging main plant reproductive structures and hampering reproductive processes, including pollen and stigma viability, pollination, fertilization, grain setting and grain filling. Despite this well-recognized fact, research on crop heat stress (HS) is relatively recent compared to other abiotic stresses, such as drought and salinity, and in particular, RSHS studies in cereals are considerably few in comparison with seedling-stage and vegetative-stage-centered studies. Meanwhile, climate change-exacerbated HS, independently or synergistically with drought, will have huge implications on crop performance and future global food security. Fortunately, due to their sedentary nature, crop plants have evolved complex and diverse transient and long-term mechanisms to perceive, transduce, respond and adapt to HS at the molecular, cell, physiological and whole plant levels. Therefore, uncovering the molecular and physiological mechanisms governing plant response and tolerance to RSHS facilitates the designing of effective strategies to improve HS tolerance in cereal crops. In this review, we update our understanding of several aspects of RSHS in cereals, particularly impacts on physiological processes and yield; HS signal perception and transduction; and transcriptional regulation by heat shock factors and heat stress-responsive genes. We also discuss the epigenetic, post-translational modification and HS memory mechanisms modulating plant HS tolerance. Moreover, we offer a critical set of strategies (encompassing genomics and plant breeding, transgenesis, omics and agronomy) that could accelerate the development of RSHS-resilient cereal crop cultivars. We underline that a judicious combination of all of these strategies offers the best foot forward in RSHS tolerance improvement in cereals. Further, we highlight critical shortcomings to RSHS tolerance investigations in cereals and propositions for their circumvention, as well as some knowledge gaps, which should guide future research priorities. Overall, our review furthers our understanding of HS tolerance in plants and supports the rational designing of RSHS-tolerant cereal crop cultivars for the warming climate. [ABSTRACT FROM AUTHOR]

A study was conducted to investigate the effect of different storage periods and temperatures on pollen viability in vitro and in vivo in plum genotypes 'Valerija', 'Čačanska Lepotica' and 'Valjevka'. In vitro pollen viability was tested at day 0 (fresh dry pollen) and after 3, 6, 9 and 12 months of storage at four different temperatures (4, −20, −80 and −196 °C), and in vivo after 12 months of storage at distinct temperatures. In vitro germination and fluorescein diacetate (FDA) staining methods were used to test pollen viability, while aniline blue staining was used for observing in vivo pollen tube growth. Fresh pollen germination and viability ranged from 42.35 to 63.79% ('Valjevka' and 'Čačanska Lepotica', respectively) and 54.58 to 62.15%, ('Valjevka' and 'Valerija', respectively). With storage at 4 °C, pollen viability and germination decreased over the period, with the lowest value after 12 months of storage. Pollen germination and viability for the other storage temperatures (−20, −80 and −196 °C) were higher than 30% by the end of the 12 months. Pollination using pollen stored at 4 °C showed that pollen tube growth mostly ended in the lower part of the style. With the other storage temperatures, pollen tube growth was similar, ranging between 50 and 100% of the pistils with pollen tubes penetrated into the nucellus of the ovule in the genotype 'Čačanska Lepotica'. The results of these findings will have implications for plum pollen breeding and conservation. [ABSTRACT FROM AUTHOR]

Roses are one of the most highly produced and purchased ornamental plants worldwide. Procurement and preservation of pollen is essential for the production of diverse rose varieties. In this study, we analyzed pollen management conditions, such as the pollen collection stage, drying time, and storage temperature, to determine optimal conditions for rose pollen management. Pollens were stored under different conditions and the pollen vitality and germination rate were investigated through an optical microscope. The vitality of pollen was an essential factor for rose breeding and depended on the storage conditions. Collecting pollen in the seventh flowering stage resulted in a relatively higher pollen yield. Drying the flower for 5 h after the anther opened improved pollen germination. The germination rate of freshly collected pollen was similar to that of pollen stored at temperatures between −20 °C and −72 °C for up to 30 days, indicating the efficacy of pollen storage at sub-zero temperatures. Since the rate of fruiting increases when pollination is performed three times, considering the time and cost of breeding, it is appropriate to pollinate three times to increase the number of seeds. This study provides an efficient pollen management method to collect and store pollen for breeding. [ABSTRACT FROM AUTHOR]

Orchids are fascinating for many reasons: their reproductive strategies, their pollination systems and the various morphological adaptations they have evolved, including the presence of pollen grains agglomerated into two masses, called pollinia, which form a structure known as a pollinarium. After withdrawal from a flower, the pollinarium undergoes a bending movement such that the pollen masses become correctly orientated to strike the stigma. We evaluated the duration of pollinator visits to inflorescences and the effects of temperature on pollinaria reconfiguration in eight orchid species in order to analyze the effects of increasing air temperature on the changes in bending time, and thus on geitonogamy levels. The impact of temperature on insect behavior was not assessed because our priority was to understand the effects of temperature on the process of pollinaria reconfiguration. All the examined species showed natural reconfiguration times that were 1.7–3.0 times longer than the pollinator residency times. A higher temperature showed a reduction in bending time regardless of the species tested. However, the bending time was never shorter than the residence time of the insects on the flower. Our data showed that high temperatures had a limited effect on the pollinarium reconfiguration time, thus indicating that high temperatures had a limited effect on folding compared to the effect that it had on the viability of the pollen. [ABSTRACT FROM AUTHOR]

Climate change is being felt in all vineyards around the world, opening up new perspectives for regions with a growing winemaking industry. In this study, 11 hybrid grapevines grown in cold climates were assessed in terms of flowering biology and pollination efficiency. The flowers were evaluated for the number of anthers and pollen grains in the flower; pollen viability and pollen grain size, the number of ovules in the ovary, and, consequently, the size and the weight of berries and the number of seeds in the berries were also analyzed. The flowers of Vitis vinifera L. usually have 5 stamens and 5 petals in their structure; this number for hybrid varieties ranged from 4 to 7, and in the case of the variety 'Seyval Blanc', it was 4 to 11 stamen and petals. Pollen grain size varied and ranged from 17.01 to 22.25 μm, while pollen grain pro-duction in flowers ranged from 5073 to 34,976 grain, which was calculated using a Bürker hemocytometer. The number of ovules in the ovary for the cultivars in question was highly variable, ranging from 3 to 7. One of the most important factors affecting flower pollination is stigma receptivity. Stigma receptivity appeared when the cap starts to fall off and disappeared at the browning of the cap. In connection with climatic changes, grapevine production is expanding to cool-climate countries. The aim of this study was to expand our knowledge about the flower morphology of 11 hybrid grapevine varieties most commonly cultivated in Poland. Knowledge of the flowering process can be important for improving yield and its quality. [ABSTRACT FROM AUTHOR]

Fragmented ash populations due to ash dieback may lead to a limited gene flow and pollination success. Therefore, the viability of ash pollen plays a major role for the survival of the species. The extent to which the long-distance transport of pollen affects pollen viability was investigated with experiments in a climate chamber using ash pollen samples from a seed orchard in Emmendingen, Germany. Furthermore, experiments with a volumetric pollen trap were conducted. A suitable storage temperature for ash pollen was determined by using four viability tests; TTC test, pollen germination, Alexander's stain and Acetocarmine. An optimization of the germination medium was performed. We found a strong influence of prevailing temperatures on pollen viability, which decreased faster under warmer conditions. At moderate temperatures, viable pollen could still be observed after 28 days. Thus, a possible successful pollination can also be associated to long-range transported pollen. Storage experiments showed that pollen viability could be maintained longer at temperatures of −20 °C and −80 °C than at 4 °C. In particular, the TTC test has proven to be suitable for determining viability. Therefore, properly stored pollen can be used for breeding programs to support the survival of Fraxinus excelsior. [ABSTRACT FROM AUTHOR]

High summer temperatures (day/night: 40 °C/30 °C) are known to cause poor fruiting, reduced fruit/seed weight, and delayed fruit development in the "Da Hong" red-fleshed pitaya (Hylocereus polyrhizus); however, the mechanisms of these effects are unknown. This study examined how high temperature (HT, 40 °C/30 °C) affects stamen and pistil fertility through pollination combinations and fruit set in "Da Hong" pitaya and evaluated photosystem II (PSII) efficiency in yellowed shoots (cladodes). The in-vitro pollen germination rate was significantly higher at optimal temperature (OT, 30 °C/20 °C) than at HT, which was also associated with a reduced flower length, poor fruit set, small fruit size, and low number of seeds after self-pollination. Meanwhile, fruit set and fruit development were remarkably improved by using the pollens taken from plants grown at OT and moderate temperature (MH, 35 °C/25 °C) after mutual cross pollination, indicating that the reduction in seed number caused by incomplete fertilization due to inferior pollen viability was the main cause of poor fruiting under HT rather than pistil or photoinhibition, although HT treatment was linked to reductions of PSII efficiency at both the adaxial and abaxial ends of shoots. The results suggested that pollen viability was most affected under HT stress; thus, yielding remarkably reduced fruiting. [ABSTRACT FROM AUTHOR]

Among many challenges in chrysanthemum cross-breeding, the access to viable pollen for hybridization of cultivars distant in location and different in flowering time is required. Low pollen viability along with incompatibility are mainly responsible for low seed set in modern chrysanthemum cultivars. The aim of the study was to test various temperatures and periods of pollen storage of Chrysanthemum × morifolium in order to elaborate the method of chrysanthemum pollen preservation for cross-breeding purposes. In the first experiment, in vitro pollen germination of four cultivars was investigated following storage at 20 °C, 4 °C, −20 °C, and −80 °C, for one, four, and eight weeks. The second experiment focused on in vivo seed set after one week pollen treatment with 20 °C, 4 °C, −20 °C, and −80 °C (three pollen donor cultivars tested). Pollen in vitro germinability, as well as seed set efficiency, was generally low and cultivar dependent. Independent of the period of storage, stored pollen germinability was lower (5.30–6.63%) than fresh pollen (8.15%). Incubation of pollen in −80 °C significantly increased pollen germinability (9.80%), as well as seed set efficiency in comparison to control (19.28% and 10.21%, respectively) provided the cultivars are compatible. Among cultivars, the highest germinability of pollen was found in 'Brda' and 'Donna' (8.2% and 8.23%, respectively), while 'Bydgoszczanka' showed the lowest germinability (2.97%). There were also pollen genotype dependent effects in in vivo seed set efficiency, which was highest in 'Brda' (17.57%) and much lower in 'Jutrzenka' and 'Polka' (1.34% and 0.39%, respectively), which contributed to the incompatibility of crossed cultivars rather than pollen viability. [ABSTRACT FROM AUTHOR]

Compared to other grasses, flowering in bamboo is quite divergent, yet complex with respect to time to flower, number of individual culms in a population that have been induced at a time (sporadic vs. gregarious), nature of monocarpy, morphology of inflorescences (solitary spikelet vs. pseudospikelet), biology of pollen and nature of genetic compatibility. Wide diversity exists even across species and genotypes. However, due to the rarity of flowering and inaccessibility, few studies have been done to systematically analyse diverse aspects of the reproductive behaviour of bamboo. In this study, four recurrently occurring, sporadic flowering populations of Bambusa tulda have been closely observed over the last seven years. Detailed inflorescence and floral morphology and development of reproductive organs have been studied. Pollen viability was assessed by staining and in vitro germination. Self and cross pollination experiments were performed in a plantation site to assess the genetic nature of pollen-pistil interaction. The study identifies interesting reproductive features, that are not common in other grasses. A few important observations include the early appearance of a solitary spikelet vs. late appearance of a pseudospikelet in the flowering cycle, low rate of pollen germination, protandry, self-incompatibility and higher rate of seed setting by the pseudospikelet as compared to the solitary spikelet. The findings will not only be useful to understand the reproductive behaviour of this non-woody timber plant, but will also be useful for forest management and sustainable use of bamboo bioresources. [ABSTRACT FROM AUTHOR]

Primula veris (Primulaceae) is a valuable medicinal plant. The main characteristics for assessing the reproductive potential (embryological features; mode of reproduction; pollen and seed viability) and the genetic diversity of populations of the species from Bulgaria were studied. The anthers are tetrasporangiate. Their wall development follows the Dicotyledonous-type and consists of: epidermis, a fibrous endothecium, an ephemeral middle layer and a secretory (glandular) tapetum. After meiosis in pollen mother cells and simultaneous microsporogenesis tetrahedral tetrads are formed predominantly in the anthers. Many ovules (approximately 20) develop in the unilocular ovary and are anatropous, tenuinucellate and bitegmic. The embryo sac (ES) develops after Polygonum (monosporic)-type from the chalazal cell of linear megaspore tetrad in the ovule. After double fertilization, a Caryophyllad-type embryo and initially nuclear endosperm form. In the studied populations, high pollen viability of more than 95% was established. Extremely low viability (about 4%) of the seeds obtained from natural populations was established. The results reveal P. veris to be a predominantly amphimictic (sexually reproducing) species, although rare vegetative propagation is also observed. As a result of this study, essential data were obtained about the reproductive structures and processes and for assessing the reproductive potential of P. veris. [ABSTRACT FROM AUTHOR]

Study of reproductive biology and pollination ecology helps in understanding the life history patterns of species. Such a study brings to light the bottlenecks, if any, on account of which the individuals of the species are not able to reproduce in nature and ultimately helps in planning appropriate conservation strategies for the species under threat. The present study was aimed at examining the morphological and reproductive variance in Berberis lycium, a threatened ecological specialist growing within shrubberies and open hillsides of the North-Western Himalayas in India. B. lycium displays three different variants. Flowering period ranges from February to September. Pollen viability as reported on fluorescein diacetate and acetocarmine treatments was highest for variant I, while maximum pollen output was obtained for variant III. Pollen pistil interaction is brought by the movement of anther towards stigma. Fluorescence microscopy of hand pollinated club shaped stigma shows that the germinating pollen form a ring over the receptive adaxial surface. Pollination syndrome is entomophily. Variant II attracts a significantly large number of pollinators from diverse insect families. Breeding experiments reflect that plants are self-compatible and cross fertile. Reproductive output (% fruit set) was highest for variant II followed by III and I, respectively. This investigation helped to understand the effect of different biotic and abiotic constraints on the phenology and reproductive biology of the plant. The information generated so will enable conservationists to design appropriate strategies for its long-term survival and sustenance in nature. [ABSTRACT FROM AUTHOR]

Heat tolerance is important for the sustainable production of many crops, including chile pepper. Tolerance to high temperature is complex and involves various component traits, with pollen viability being among the most important. in vitro pollen assays for heat tolerance have been widely used in chile pepper; however, associations between the pollen treatment and pollination have not been widely explored. The objectives of this study were to validate the utility of in vitro heat stress pollen characterization through in vivo pollination during summer and winter seasons and to evaluate the cross-compatibility among wild and domesticated species to initiate introgression population development. Seven entries of wild and domestic Capsicum species grown during the summer and winter seasons were used to evaluate pollination success rate. Pollen was either used directly or treated at 38 °C for four hours before making reciprocal self- and cross-pollination among all the entries. Significant associations between in vitro pollen treatment and pollination success rate during summer and winter seasons were identified. Heat treatment was a greater contributor to variability than the growing environment, which validates previous reports on the usefulness of studying pollen in vitro in selection for heat tolerance. Accessions of the wild progenitor C. annuum var glabriusculum, PBC 1969 and PBC 1970, were identified as a potential heat-tolerant source for use in breeding and future research. This work provides a basis for future research in exploring additional heat tolerance components as well as for the development of phenotyping assays for pollen or other floral traits. [ABSTRACT FROM AUTHOR]

Our study attempted to elucidate the significance of floral and pollen traits of the highly nutritious tropical trees Moringa oleifera and Moringa peregrina for their reproductive success under arid conditions. We found that the pollen grains of both species were immersed in a pollenkitt that constituted ~60% of the pollen. Successful pollination was achieved by large bees inserting the pollen into a narrow stylar tube. We found that, upon removal of the pollenkitt, approximately 65% fewer pollen grains penetrated the stylar tube for both species. The pollenkitt protected against heat and desiccation, while removing the pollenkitt resulted in significantly reduced levels of the viability of pollen grains, especially in M. oleifera, and significantly reduced levels of germinability in both species. The stylar tube provided high protection for pollen grains against heat and desiccation even when the pollenkitt was removed. Chemical analysis of pollenkitts of the two species revealed a waxy blend of 21 hydrocarbon compounds, in which n-alkanes constituted >90% of the compounds and their identity corresponded to known plant and animal hydrocarbons, associated with protection against heat and water stress. We concluded that, under arid conditions, the reproductive success of both Moringa species is potentially enhanced by their unique floral and pollen traits. This supports the prospect of cultivating M. oleifera and Moringa peregrina as food crops in arid regions across the globe. [ABSTRACT FROM AUTHOR]

Research Highlights: Cyclocarya paliurus, native to the subtropical region of China, is a monoecious species with a heterodichogamous mating system. Its flowering phenology and low seed success characteristics differ from other typical heterodichogamous Juglandaceae species. This could be caused by the existence of polyploidy in the population. Background and Objectives: C. paliurus has been attracting more attention as a result of its medicinal value. To meet the needs for leaf harvest, cultivation expansion is required, but this is limited by a shortage of seeds. This study aims to profile the flowering phenology and the efficacy of pollen dispersal as well as elucidate on the mechanism of low seed success in the population. Materials and Methods: The flowering phenology pattern of C. paliurus was observed in a juvenile plantation containing 835 individuals of 53 families from 8 provenances at the individual (protandry, PA and protogyny, PG) and population levels for 5 consecutive years (2014–2018). Slides with a culture medium of 10% sucrose and 0.01% boric acid were used to estimate pollen density and viability in the population, and seeds were collected from 20 randomly selected PA and PG individuals to assess seed success during 2017–2018. Results: Four flowering phenotypes and strongly skewed ratios of PA/PG and male/female occurred in the juvenile population. Sexual type and ratio changed significantly with the growth of the population over the years, showing an increasing monoecious group (11.1% to 57.2%) and a decreasing unisexual group (33.6% to 16.3%), as well as a tendency for the sexual ratio to move towards equilibrium (5.42:1 to 1.39:1 for PG:PA). Two flowering phases and bimodality in gender were displayed, as in other heterodichogamous species. However, the high overlap of inter-phases and within individuals was quite different from many previous reports. Owing to the low pollen viability of C. paliurus (~30%), low seed success was monitored in the plantation, as well as in the investigated natural populations. Conclusions: Female-bias (PG and F) and a skewed ratio of mating types corresponded to nutrient accumulation in the juvenile population. Heterodichogamy in C. paliurus was verified, but was shown to be different from other documented species in Juglandaceae. The latest finding of major tetraploidy in a natural population could explain the characteristics of the flowering phenology and seed set of C. paliurus and also give rise to more questions to be answered. [ABSTRACT FROM AUTHOR]