Search

Environmental restoration and sustainable energy solutions require effective management and utilization of agricultural crop residues to reduce greenhouse gas emissions. Biowastes are a valuable resource that can be converted into biofuels and their byproducts, solving the energy crisis and reducing environmental impact. In this study, teff husk, primarily generated in Ethiopia during the production of teff within the agro-industrial sector, is used as a feedstock for slow pyrolysis. Ethiopia generates an estimated annual production of over 1.75 million tons of teff husk, a significant portion of which is incinerated, resulting in significant pollution of the environment. This study focuses on assessing teff husk as a potential material for slow pyrolysis, a crucial stage in biochar production, to tap into its biochar-producing potential. To identify the composition of biomass, the teff husk underwent an initial analysis using thermogravimetry. The significant presence of fixed carbon indicates that teff husk is a viable candidate for pyrolytic conversion into biochar particles. The process of slow pyrolysis took place at three temperatures—specifically, 400, 450, and 500 °C. The maximum biochar yield was achieved by optimizing slow pyrolysis parameters including reaction time, temperature, and heating rate. The optimized reaction time, temperature, and heating rate of 120 min, 400 °C, and 4.2 °C/min, respectively, resulted in the highest biochar yield of 43.4 wt.%. Furthermore, biochar's physicochemical, SEM-EDX, FTIR, and TGA characterization were performed. As the temperature of biochar increases, its carbon content and thermal stability increases as well. Unlike fuel recovery, the results suggest that teff-husk can be used as a feedstock for biochar production. [ABSTRACT FROM AUTHOR]

The production of biofuels and biochar through pyrolysis is a promising avenue for sustainable energy generation and waste management. However, this process can inadvertently release various air pollutants into the atmosphere, potentially compromising its environmental benefits. This article provides a comprehensive overview of the gas pollutants associated with pyrolysis for biofuel and biochar production, as well as different variables affecting gas emissions. Key pollutants such as particulate matter (PM), volatile organic compounds (VOCs), polycyclic aromatic hydrocarbons (PAHs), carbon monoxide (CO), and nitrogen oxides (NOx) have been discussed in terms of their formations and emissions during pyrolysis processes. Furthermore, major factors influencing pollutant emissions, including feedstock composition, pyrolysis conditions, and combustion technologies have been examined with up-to-date examples. The review highlights the significance of emission control strategies, such as advanced reactor design, catalyst utilization, and the integration of realtime monitoring systems, in mitigating air pollution from pyrolysis processes. By shedding light on the environmental challenges associated with pyrolysis-based biofuel and biochar production, this article aims to encourage the development of cleaner and more sustainable approaches to harness the potential of solid waste conversion technologies. [ABSTRACT FROM AUTHOR]

Walnut, pistachio, and peanut nutshells were treated by pyrolysis to biochar and analyzed for their possible usage as fuels or soil fertilizers. All the samples were pyrolyzed to five different temperatures, i.e., 250 °C, 300 °C, 350 °C, 450 °C, and 550 °C. Proximate and elemental analyses were carried out for all the samples, as well as calorific value and stoichiometric analysis. For sample usage as a soil amendment, phytotoxicity testing was performed and the content of phenolics, flavonoids, tannin, juglone, and antioxidant activity were determined. To characterize the chemical composition of walnut, pistachio, and peanut shells, lignin, cellulose, holocellulose, hemicellulose, and extractives were determined. As a result, it was found that walnut shells and pistachio shells are best pyrolyzed at the temperature of 300 °C and peanut shells at the temperature of 550 °C for their use as alternative fuels. The highest measured net calorific value was in pistachio shells, which were biochar pyrolyzed at 550 °C, of 31.35 MJ kg−1. On the other hand, walnut biochar pyrolyzed at 550 °C had the highest ash share of 10.12% wt. For their use as soil fertilizers, peanut shells were the most suitable when pyrolyzed at 300 °C, walnut shells at 300 and 350 °C, and pistachio shells at 350 °C. [ABSTRACT FROM AUTHOR]

Tea waste as a potential biofuel and bio fertilizer was analyzed. Samples were collected from various tea species and torrefied to five different temperatures. All samples were analyzed for their proximal composition and calorific value. From the results, stoichiometric properties were calculated. A phytotoxicity test was performed, and the germination index was measured. Tea waste torrefied at 350 °C may be suitable biofuel reaching the calorific value of 25–27 MJ kg−1, but with quite a high share of ash, up to 10%, which makes its use technically challenging and may lead to operating issues in a combustion chamber. The same biochar may be a suitable fertilizer for increasing the germination index, therefore, applicable to the soil. The non-torrefied sample and the sample treated at 250 °C are not suitable as fertilizers for being toxic. The total phenolic content in waste black tea was reduced from 41.26 to 0.21 mg g−1, depending on the torrefaction temperature. The total flavonoid content was also reduced from 60.49 to 0.5 mg g−1. The total antioxidant activity in the non-torrefied sample was 144 mg g−1, and after torrefaction at 550 °C, it was 0.82 mg g−1. The results showed that black tea waste residues have the potential for further use, for example, in agriculture as a soil amendment or as a potential biofuel. [ABSTRACT FROM AUTHOR]

Due to the depletion of fossil fuels and the destruction wrought by global warming caused by the combustion of fossil fuels, the search for renewable energy sources has become a major global concern. This study aimed to assess the bio-oil production from teff husk via slow pyrolysis process. The pyrolysis of teff husk took place in a batch reactor at a temperature between 400 °C and 500 °C with a 120 min retention time. At 450 °C, the pyrolysis process produced 32.96 wt.% of optimum bio-oil yield and had a HHV of 25.32 MJ/kg. TGA, FTIR, and SEM-EDX were used to analyze the produced bio-oil to investigate its thermal decomposition, functional groups, and surface morphology with its elemental composition, respectively. Alcohols, aromatic, phenols, alkanes, esters, and ethers were the primary compounds of the bio-oil produced by the slow pyrolysis of teff husk. The HHV of the biochar ranged from 21.22 to 22.85 MJ/kg. As a result, teff husk can be used to make biofuel; however, further bio-oil upgrading is needed for the produced teff husk bio-oil to be used effectively and commercially. Overall, the slow pyrolysis of teff husk offers a chance to produce biofuels with enhanced value that can be used for additional purposes. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass is an excellent alternative of fossil source because it is low-cost, plentiful and environmentally friendly, and it can be transformed into biogas, bio-oil and biochar through pyrolysis; thereby, the three types of pyrolytic products can be upgraded or improved to satisfy the standard of biofuel, chemicals and energy materials for industries. The bio-oil derived from direct pyrolysis shows some disadvantages: high contents of oxygenates, water and acids, easy-aging and so forth, which restrict the large-scale application and commercialization of bio-oil. Catalytic pyrolysis favors the refinement of bio-oil through deoxygenation, cracking, decarboxylation, decarbonylation reactions and so on, which could occur on the specified reaction sites. Therefore, the catalytic pyrolysis of lignocellulosic biomass is a promising approach for the production of high quality and renewable biofuels. This review gives information about the factors which might determine the catalytic pyrolysis output, including the properties of biomass, operational parameters of catalytic pyrolysis and different types of pyrolysis equipment. Catalysts used in recent research studies aiming to explore the catalytic pyrolysis conversion of biomass to high quality bio-oil or chemicals are discussed, and the current challenges and future perspectives for biomass catalytic pyrolysis are highlighted for further comprehension. [ABSTRACT FROM AUTHOR]

In recent years, a new class of superior heterogeneous acid catalyst for biodiesel production has emerged. These catalysts offer advantages over their predecessors such as high surface area, elevated acid site density, enhanced catalyst activity, good operation stability and relevant economic affordability in an environmentally friendly frame. This review was concerned with carbon-based solid acid (CBAS) catalysts derived from both carbohydrate and pyrolysis products. A series of CBASs with various origins such as D-glucose, sucrose, starch, cellulose and vegetable oil asphalt, converted to char and sulphonated, have been explored as potential heterogeneous catalysts. Catalyst preparation and synthesis methods were briefly summarized. Catalyst characterization and performance for biofuels related reactions were elucidated, identifying potential research applications. Three catalysts in particular were identified as having potential for industrial application and requiring further research. [ABSTRACT FROM AUTHOR]

This study investigated the behavior of two types of modified biochar (functional and iron composite biochars) as a catalyst regarding their surface chemistry and morphological properties and their effects on bio-product derived from pyrolysis of Cladophora glomerata (C. glomerata) macroalagae. Two catalytic pyrolysis experiments were conducted in 25 mL slow pyrolysis reactor in the presence of biochar-based catalysts at the temperature of 500 °C. For functional biochar, no clear effect on biogas production was observed, whereas iron composite biochar increased the hydrogen content by 7.99 mml/g algae. Iron composite biochar with a 3D network structure demonstrated remarkable catalytic behaviors (especially toward hydrogen production) due to its wonderful surface area, high dispersion of iron particles and particular structures and compositions. The biochar derived marine biomass and treatment process developed here could provide a promising path for the low-cost, efficient, renewable and environmental friendly catalysts. [ABSTRACT FROM AUTHOR]

Yellow poplar (Liriodendron tulipifera) was chosen as the woody biomass for the production of charcoal for use in a liquid fuel slurry. Charcoal produced from this biomass resulted in a highly porous structure similar to the parent material. Micronized particles were produced from this charcoal using a multi-step milling process and verified using a scanning electron microscope and laser diffraction system. Charcoal particles greater than 50 µm exhibited long needle shapes much like the parent biomass while particles less than 50 µm were produced with aspect ratios closer to unity. Laser diffraction measurements indicated D10, D50, and D90 values of 4.446 µm, 15.83 µm, and 39.69 µm, respectively. Moisture content, ash content, absolute density, and energy content values were also measured for the charcoal particles produced. Calculated volumetric energy density values for the charcoal particles exceeded the No. 2 diesel fuel that would be displaced in a liquid fuel slurry. [ABSTRACT FROM AUTHOR]