Search

This study aimed to investigate the impact of as-received biomass fly ashes (BFA) and green liquor dregs obtained from a pulp and paper plant in Brazil as substitutes for metakaolin in geopolymeric formulations. The properties of this type of waste material vary widely between different industrial plants. This study refrains from subjecting the waste materials to any form of pretreatment, taking into account their organic matter and particle size heterogeneity, requiring extensive characterization to evaluate their influence on the compressive strength, apparent open porosity, and water absorption of the geopolymeric samples. The objective was to assess their potential for upcycling purposes as an alternative to energy-intensive materials, such as ordinary Portland cement (OPC) and advanced ceramics. This potential arises from the ability of alkali-activated materials (AAM) to undergo curing at ambient temperatures, coupled with the possibility of compositions primarily derived from waste materials. To improve the sustainability of the products, the amorphous content of the raw material, which is more reactive than crystalline phases, was quantified and used as the base for mixture ratios. This approach aimed to reduce the requirement for alkaline activators, which have significant environmental impacts, while also increasing the waste content in the formulation. The incorporation of waste materials into the geopolymer matrix generally led to a reduction in the compressive strength compared to the benchmark metakaolin sample (19.4 MPa) but did not present a trend. The dregs led to values of 4.1 MPa at 25 wt% and 7.1 MPa at 50 wt%, a behavior that is somewhat counterintuitive, and BFA at 10 wt% presented 5.7 MPa. Nevertheless, the apparent open porosity remained at high levels for all the samples, close to 50%, and the compressive strength of most of them was over the values obtained for the metakaolin-only samples with mixture ratios calculated from the total composition instead of the amorphous composition. The decrease in strength and the increase in porosity were attributed to the specific characteristics of the waste materials, such as their high crystallinity, presence of organic matter, heterogeneous particle composition, and size. Overall, this study provides insight into the variations in geopolymerization based on the bulk and amorphous content of the aluminosilicate sources and how the characteristics of the waste materials influence the geopolymer matrix. It also highlights how calculating mixture ratios based on the amorphous composition improves the possibility of waste valorization through alkali activation. Additionally, it suggests that BFA and dregs might be effectively utilized in applications other than OPC substitution, such as adsorption, filtration, and catalysis. [ABSTRACT FROM AUTHOR]

Visceral leishmaniasis remains a serious public health issue, and Brazil was among the seven countries with the highest prevalence of this disease worldwide. The measures to control this disease are not easily developed, and the improvement of its diagnosis, surveillance, and control is still needed. This study aimed to carry out the polymerase chain reaction (PCR) diagnosis of Leishmania infantum in vector samples in some municipalities of the State of São Paulo, which included two municipalities with human disease transmission and two with dog transmission only. Vectors were collected in traps with luminous bait. Next, they were killed at −4 °C and kept in 70% alcohol. Groups of ten female insects (pools) were mashed on cation exchange paper (fine cellulose phosphate with 18 µEq/cm² ionic exchange capacity) for DNA extraction. The PCR was carried out to identify the natural infection of the Leishmania genus in female Lutzomyia longipalpis (Lu. Longipalpis). Out of the 3,880 Lu. longipalpis phlebotomines, 1060 were female and 2820 were male (3:1). The method used to extract the DNA in pools of ten phlebotomines and the PCR resulted in sensitivity, specificity, practicality, and faster analyses when compared to the individual analysis method. The procedure described can be used on a large scale in the leishmaniasis epidemiological surveillance, enabling a higher number of analyses and the optimization of human resources because the traditional diagnostic method is carried out via desiccation of the insect digestive system and microscopic examination, which is time-demanding and there is the need of manual skills. [ABSTRACT FROM AUTHOR]

The forest sector plays an important role in the circular bioeconomy due to its focus on renewable materials that can substitute fossil or greenhouse gas emissions-intensive materials, store carbon in bio-based products and provide ecosystem services. This study investigates the state of the bioeconomy in Brazil and its forest industry. Specifically, this study presents some examples of novel wood-based products being developed or manufactured in Brazil and discusses possible opportunities for the development of the country's forest sector. The pulp and paper industry plays an important role in the forest sector. It has also been showing advancements in the development of cascading uses of wood invalue-added products, such as nanocrystalline cellulose, wood-based textile fibers, lignin-based products, and chemical derivatives from tall oil. Product and business diversification through the integration of the pulp and paper industry to biorefineries could provide new opportunities. Moreover, biochemicals derived from non-wood forest products, such as resin and tannins could promote diversification and competitiveness of the Brazilian forest industry. Although some engineered wood products are still a novelty in Brazil, the market for such products will likely expand in the future following the global trends in wood construction. [ABSTRACT FROM AUTHOR]

Industrial energy efficiency has received increasing attention in many countries because of its importance in the pursuit of energy supply security, increased economic competitiveness and in the mitigation of greenhouse gases emissions. This paper aimed to evaluate the energy consumption development of the Brazilian pulp and paper industry through an energy decomposition analysis and an energy efficiency index approach over a 30 years period. An international comparison with other important paper-producing countries (i.e., Canada, United States of America, Finland and Sweden) was carried out. It was concluded that despite a significant increase in the energy efficiency levels, responsible for 5.6 PJ savings in electricity consumption and for 38.6 PJ savings in fuels consumption between 1979 and 2009, a saving potential of 7.8 PJ and 146.2 PJ related to the annual consumption of electricity and fuels, respectively, could be identified in the Brazilian pulp and paper industry. Among the countries evolved in the international comparison, both the Swedish and Finnish industries were the most efficient, followed by the Brazilian, American and Canadian, the latter being the only one where there was a reduction in the energy efficiency levels from 1979 to 2009. [ABSTRACT FROM AUTHOR]

Forest based power plants are alternatives in the diversification of domestic energy supply in Brazil, given the growing demand for electricity in recent decades. Evidences of space-time clusters contribute to the understanding of regional development associated with correlated activity. Therefore, this paper analyzed the space-time conglomerates for Brazilian forest-based power plants, from 2000 to 2019. The data used were from the Generation Information System of the National Electric Energy Agency (ANEEL)-SIGA. It detected the existence of clusters by means of scan statistics via space-time permutation, considering the high level of conglomeration. The results show the Center-South region of Brazil with the highest concentration of conglomerates, with black liquor and forest residues being the most used energy resources. The clusters with the highest installed power were in the early 2010s, with the black liquor plants. The regions with the formation of fast-growing forest plantations promoted the existence of conglomerates associated with the pulp and paper and steel industry complexes. It is concluded that there was a conglomeration of forest power plants in the central-south region of Brazil, in which they help in decision-making and guidance of public policies for forestry projects for energy. [ABSTRACT FROM AUTHOR]

Although recycling is considered the core of a circular economy for returning materials to the supply chain, its procedures are poorly understood. Waste recycling is considered a big source of energy saving and a promoter of CO2 recovery. Besides that, it generates jobs and changes markets worldwide. The Brasilian National Policy on SolidWaste (PNRS) recognizesWaste Pickers as the major social agent in the recycling process responsible for putting Brasil among the ten largest paper-recycling countries in the world. This paper presents an analysis of Brasilian recycling chains of paper and plastics and the main challenges for expanding recycling from Municipal solid waste. The research data were obtained from primary and secondary source related to the recycling supply chain of paper and of the following plastics--High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Polypropylene(PP), Polyethylene Terephthalate(PET) and Polystyrene(PS). Enterprises of various sizes, including informal ones and WPs associations/cooperatives, were visited, in the five Brasilian geographic regions, during the years of 2013 and 2014. A nomenclature was defined for the various enterprises that operate in the Brasilian recycling chain. Each node of the plastic and paper recycling chain was described. The main bottleneck observed in these chains is the lack of continuous programs of selective collection with an emphasis on environmental education processes in the 5570 Brasilian municipalities. Several possibilities not only to promote waste recycling but also to increase the productivity of the sorting process are discussed. [ABSTRACT FROM AUTHOR]

The sugarcane industry has assumed an increasingly important role at a global level, with countries such as Brazil and India dominating the field. However, this causes environmental problems, since the industry produces large amounts of waste, such as sugarcane bagasse. This by-product, which is energetically partially recovered in sugar mills and in the pulp and paper industry, can make a significant contribution to the general use of biomass energy, if the usual disadvantages associated with products with low density and a high moisture content are overcome. From this perspective, thermochemical conversion technologies, especially torrefaction, are assumed to be capable of improving the fuel properties of this material, making it more appealing for potential export and use in far-off destinations. In this work, sugarcane samples were acquired, and the process of obtaining bagasse was simulated. Subsequently, the bagasse was dried and heat-treated at 200 and 300 °C to simulate the over-drying and torrefaction process. Afterward, product characterization was performed, including thermogravimetric analysis, elemental analysis, calorimetry, and energy densification. The results showed significant improvements in the energy content, from 18.17 to 33.36 MJ·kg−1 from dried bagasse to torrefied bagasse at 300 °C, showing that despite high mass loss, there is potential for a future value added chain for this waste form, since the increment in energy density could enhance its transportation and use in locations far off the production site. [ABSTRACT FROM AUTHOR]

A set of diseases caused by fungi and oomycetes are responsible for large losses in annual world cocoa production. Managing the impact caused by these diseases is very complex because a common solution has yet to be found for different pathogens. In this context, the systematic knowledge of Theobroma cacao L. pathogens' molecular characteristics may help researchers understand the possibilities and limitations of cocoa disease management strategies. This work systematically organized and summarized the main findings of omics studies of T. cacao eukaryotic pathogens, focusing on the plant–pathogen interaction and production dynamics. Using the PRISMA protocol and a semiautomated process, we selected papers from the Scopus and Web of Science databases and collected data from the selected papers. From the initial 3169 studies, 149 were selected. The first author's affiliations were mostly from two countries, Brazil (55%) and the USA (22%). The most frequent genera were Moniliophthora (105 studies), Phytophthora (59 studies) and Ceratocystis (13 studies). The systematic review database includes papers reporting the whole-genome sequence from six cocoa pathogens and evidence of some necrosis-inducing-like proteins, which are common in T. cacao pathogen genomes. This review contributes to the knowledge about T. cacao diseases, providing an integrated discussion of T. cacao pathogens' molecular characteristics, common mechanisms of pathogenicity and how this knowledge is produced worldwide. [ABSTRACT FROM AUTHOR]

This study aimed to verify the linear associations between the physical, chemical and microbiological variables of spring water. The research was developed from two seasons of spring water sample collections and evaluated physical–chemical variables such as temperature, pH, turbidity, electrical conductivity, total alkalinity, total hardness, total ammonia, nitrite, nitrate, true and apparent colors, total phosphorus, fluoride and total iron, and microbiological variables—total coliforms and Escherichia coli. The variables' total alkalinity, total hardness, and electrical conductivity have a strong positive correlation among them (r > 0.50), which is similar to what occurs with the variables' turbidity, apparent color, true color, and total iron, between nitrite and total iron, and between the turbidity and total coliforms. These correlations occur as a function of the interaction that water has with the soil and the compounds found, thus altering the quality. The springs do not have masonry protection, they only have plant protection. Moreover, this water is exposed and accessible to animals in these areas. In addition, the result of the surface and sub-surface flow effect of spring water must be considered. [ABSTRACT FROM AUTHOR]

Amblyomma sculptum is a species of public health interest because it is associated with the transmission of the bacteria that causes Brazilian Spotted Fever (BSF). The use of repellents on humans is a prophylactic measure widely used to provide protection against a series of arthropod vectors, including mosquitoes and ticks. However, in Brazil, the effectiveness of commercial repellents against A. sculptum is little known. Therefore, it is necessary to carry out specific studies to evaluate the repellency of these commercial products, registered for use against mosquitoes, against the star tick. The main goal of the present work was to evaluate the effectiveness of six commercial repellents against A. sculptum. Unfed nymphs, aged between two and eight weeks, were tested against products based on DEET (OFF!® and Repelex®), Icaridin (Exposis® and SBP®), and IR3535 (Johnsons and Henlau). Three bioassays were conducted to evaluate tick behavior: (i) filter paper, (ii) fingertip, and (iii) field. All bases tested showed high repellent activity, differing significantly (p < 0.05) from the control. It was observed the formulation with DEET resulted in the best results in the filter paper bioassay. In the fingertip bioassay, the DEET base repelled a greater number of ticks compared to Icaridin. In the field bioassay, there was no significant difference between the Icaridin base and DEET, and both formulations differed from the control (p < 0.05). The six formulations tested showed significant percentages of repellency against ticks; however, for the fingertip and field bioassays, the products OFF!®, Repelex®, and Exposis® were tested as they showed better performance in the filter paper test. OFF!® showed the best percentage of repellency (100%), followed by Repelex® (96.8%), and Exposis® (93.1%), considering the two-hour period of the bioassay-field-test. Proving the effectiveness of repellents on the market against A. sculptum presented in this study is crucial, since this is the main ectoparasite of humans that can transmit Rickettsia rickettsii when infected. The effectiveness of commercial insect repellents against other tick species that parasitize humans can also be explored. [ABSTRACT FROM AUTHOR]

The fact that there are (at least) two different translations of the English preposition for used to describe duration in Portuguese, namely durante and por, shows that duration is an interesting area in the tense and aspect panorama of this language, which deserves close study. In this paper, I present an empirical study based on four different corpora to investigate the matter, looking at the Portuguese varieties from Brazil and Portugal and different text genres (general and specialised newspapers, oral interviews, and fiction). The material spans circa two centuries. This paper identifies some specific uses and preferences of the two adverbials and confirms and challenges other claims in the linguistic literature. It shows that narrative fiction is definitely different from newspaper text due to its need to describe short duration and that planned duration can be expressed using both kinds of adverbials. [ABSTRACT FROM AUTHOR]

Myrciaria floribunda, also known as rumberry, is a tree native to the Brazilian Atlantic Forest, where its fruits have the potential for commercial use. This study evaluates the antioxidant potential, determines the phytochemical profile, and chemically characterizes the rumberry fruit. Accessions were sampled from the Rumberry Active Germplasm Bank of the Federal University of Alagoas, Brazil. Physical characteristics, chemical characteristics, and phenolic compound content were analyzed. Chemical profile characterization was carried out using PSMS. Accessions had an average weight of 0.86 g. Accession AC137 presented a higher pulp yield (1.12 g). AC132 and AC156 had larger fruits, AC137 showed greater firmness (5.93 N), and AC160 had a higher and total phenolic content ratio (279.01 ± 11.11). Orange-colored accessions scored higher in evaluated parameters, except for AC160 for phenolic content. Thirty-two compounds were identified on positive ionization mode and 42 compounds on negative ionization mode using PSMS. Flavonoids, followed by the derivatives of benzoic acid, sugars, and phenylpropanoids, were the most prominent. Myricitrin, quercitrin, and catechin stand out as flavonoids that have been reported in previous studies with antioxidant and antimicrobial properties, in addition to health and therapeutical benefits, demonstrating the potential of the rumberry fruit. [ABSTRACT FROM AUTHOR]

The emerging energy transition is particularly described as a move towards a cleaner, lower-carbon system. In the context of the global shift towards sustainable energy sources, this paper reviews the potential and roadmap for hydrogen energy as a crucial component of the clean energy landscape. The primary objective is to present a comprehensive literature overview, illuminating key themes, trends, and research gaps in the scientific discourse concerning hydrogen production and energy policy. This review focuses particularly on specified geographic contexts, with an emphasis on understanding the unique energy policies related to renewable energy in Brazil, Austria, and Germany. Given their distinct social systems and developmental stages, this paper aims to delineate the nuanced approaches these countries adopt in their pursuit of renewable energy and the integration of hydrogen within their energy frameworks. Brazil exhibits vast renewable energy potential, particularly in wind and solar energy sectors, positioning itself for substantial growth in the coming years. Germany showcases a regulatory framework that promotes innovation and technological expansion, reflecting its highly developed social system and commitment to transitioning away from fossil fuels. Austria demonstrates dedication to decarbonization, particularly through the exploration of biomethane for residential heating and cooling. [ABSTRACT FROM AUTHOR]

The chemical composition of propolis varies between different types, due to the specific vegetation found near the hives and the climatic and soil conditions worldwide. Green propolis is exclusive to Brazil, produced by bees, with the resin of the plant Baccharis dracunculifolia. Brown propolis is a specific variety produced mainly in Northeast Brazil from the plant Hyptis divaricata, also known as "maria miraculosa". Dark propolis is a variety of propolis produced by bees from the resin of the plant known as Jurema Preta (Mimosa hostilis benth). In this study, the aqueous extracts of green, brown, and dark propolis were analyzed for their antioxidant capacity using ABTS, FRAP, and DPPH, and their chemical profiles were determined using paper spray mass spectrometry. Among the three extracts, green propolis had the highest content of total phenolic compounds (2741.71 ± 49.53 mg GAE. 100 g−1), followed by brown propolis (1191.55 ± 36.79 mg GAE. 100 g−1), and dark propolis had the lowest content (901.79 ± 27.80 mg GAE. 100 g−1). The three types of propolis showed high antioxidant capacity, with green showing the highest antioxidant capacity for the three methods used. Using paper spray mass spectrometry, it was possible to suggest the presence of 116 substances, including flavonoids (56), phenylpropanoids (30), terpenes (25), carboxylic acids (1), benzoic acid derivatives (1), fatty acids (1), amino acids (1) and alkaloids (1). The compounds in the green, brown, and dark propolis extracts reinforce the bioactive potential for application in these tree extracts' food and pharmaceutical products. [ABSTRACT FROM AUTHOR]

The paper in question is focused on (1) valuing the expanded and transdisciplinary approach for the definition of cultural heritage, consolidated in Brazil from the 1970s/1980s onwards, (2) and its subsequent applicability in the field of education, under the influence of a liberating pedagogy proposed by educator Paulo Freire. An important consequence of this process involves the conception of a formal education system structured to promote collectivity, equality, diversity, and educational equity, as a solution towards ensuring both the learning and development of students. (3) The paper discusses the contribution of the expanded context of cultural heritage and its relationship with the field of education in the development of pedagogical strategies that promote educational equity, through the Base Nacional Comum Curricular (BNCC), a document that parameterizes the curricula from early childhood education to high school in Brazil. From a bibliographic review, the paper presents the conjuncture on which the new look at cultural heritage has been consolidated, and the consequent redefinition of heritage education actions, and then, as a result, analyzes the approximation between this new approach and the formal educational strategies present in the BNCC, as well as the possibilities of intercommunication between both. [ABSTRACT FROM AUTHOR]

Spatial autocorrelation describes the interdependent relationship between the realizations or observations of a variable that is distributed across a geographical landscape, which may be divided into different units/areas according to natural or political boundaries. Researchers of Geographical Information Science (GIS) always consider spatial autocorrelation. However, spatial autocorrelation research covers a wide range of disciplines, not only GIS, but spatial econometrics, ecology, biology, etc. Since spatial autocorrelation relates to multiple disciplines, it is difficult gain a wide breadth of knowledge on all its applications, which is very important for beginners to start their research as well as for experienced scholars to consider new perspectives in their works. Scientometric analyses are conducted in this paper to achieve this end. Specifically, we employ scientometrc indicators and scientometric network mapping techniques to discover influential journals, countries, institutions, and research communities; key topics and papers; and research development and trends. The conclusions are: (1) journals categorized into ecological and biological domains constitute the majority of TOP journals;(2) northern American countries, European countries, Australia, Brazil, and China contribute the most to spatial autocorrelation-related research; (3) eleven research communities consisting of three geographical communities and eight communities of other domains were detected; (4) hot topics include spatial autocorrelation analysis for molecular data, biodiversity, spatial heterogeneity, and variability, and problems that have emerged in the rapid development of China; and (5) spatial statistics-based approaches and more intensive problem-oriented applications are, and still will be, the trend of spatial autocorrelation-related research. We also refine the results from a geographer's perspective at the end of this paper. [ABSTRACT FROM AUTHOR]

This review delves into the processing of tannery solid waste, emphasizing fleshings and chromium-tanned leather waste. This paper centers on fat recovery, chromium elimination, and protein preservation, aiming to make them apt for animal consumption. This paper also assesses the potential of introducing such recycled products to the global market. Drawing on the literature from the past two decades, sourced comprehensively from Scopus and Web of Science, 36 articles were selected because of their significant contributions from leather production powerhouses such as India and Brazil. Fleshings have shown immense potential as animal feed, and the extraction of tallow and collagen from rawhide trimmings yields up to 98% and 93%, respectively. Fermented tannery fleshings, notably with Enterococcus faecium HAB01, also demonstrate strong antioxidant capabilities. The overarching consensus emphasizes the need for rigorous purification when dealing with chromium-containing wastes, addressing concerns tied to Cr (III) and Cr (VI). Furthermore, raw tannery fleshings stand out as a sustainable, cost-effective, and globally marketable solution for animal feed production. [ABSTRACT FROM AUTHOR]

This paper addresses the optimization of contracted electricity demand (CD) for commercial and industrial entities, focusing on cost reduction within the Brazilian time-of-use electricity tariff scheme. Leveraging genetic algorithms (GAs), this study proposes a practical approach to determining the optimal CD profile, considering the complex dynamics of energy demand on a city-like load. The methodology is applied to a case study at the Federal University of Pará, Brazil, where energy efficiency and demand response initiatives as well as renewable energy projects are underway. The findings highlight the significance of tailored demand management strategies in achieving energy-related cost reduction for large-scale consumers, with implications for economic efficiency in energy consumption. [ABSTRACT FROM AUTHOR]

Indigenous peoples and local communities are key actors in the preservation of important biodiversity resources around the world. However, the ever-encroaching agricultural frontier and expansion of conventional agricultural practices threaten these communities, their autonomy over the land, and the traditional knowledge and practices associated with biodiverse ecosystems. Agroecology emerges as an important solution to support the continuation of agrobiodiversity, food security, and environmental conservation, but top-down solutions often do not resonate with the lived realities of traditional, Indigenous, and small-scale farming communities. This paper examines a collaborative research and narrative network developed over the past several years around traditional erva-mate agroforestry production in Southern Paraná, Brazil. It offers an example of how oral environmental history and public history can support conservation practices through agroecology. The key outcomes of this interdisciplinary, multi-dimensional research and engagement were the development of a candidacy for the system to be recognized as a Globally Important Agricultural Heritage System (GIAHS) from the Food and Agricultural Organization of the United Nations (FAO) and the implementation of a Dynamic Conservation Action Plan to address the threats and challenges farmers and communities are facing. The discussion explores two concepts that were integral to these processes, the creation of narrative networks and a focus on plurivocity. Both approaches ensured that the actions, knowledge, and narratives developed through the GIAHS candidacy were not imposed but agreed upon and generative through narrative and dialogue, remaining true to the realities and lived experiences of community members. [ABSTRACT FROM AUTHOR]

Recognizing the urgent need for mitigating global warming, natural ventilation presents a potential strategy to reduce cooling energy demands, enhance thermal comfort, and contribute to indoor air quality. H-shaped buildings are prevalent worldwide, and they constitute the majority of the social housing construction in Brazil. Research suggests that the inadequate design of these buildings can result in poor ventilation; however, investigations about their natural ventilation performance are limited. Thus, the present contribution aims to determine the impact of the geometric characteristics of H-shaped buildings on the pressure distribution through wind tunnel experiments. Three models were tested in the wind tunnel experiments, representing different proportions. Their scales were configured to comply with the 5% obstruction limit allowed for wind tunnel testing, which was performed for 20 wind attack angles. Moreover, a scour test was carried out to allow a better understanding of the wind flow. Python scripting was developed to automate data processing, which is openly available in this paper. The results indicate that the proportion of the model influences the pressure distribution on roofs and leeward walls. Additionally, the depth of the recessed cavity affects its side surfaces and can result in a mirrored behavior on the frontal face of deep cavities (i.e., the wind direction is 45°). The model height influences the windward surfaces in its lower portion, since taller models present a recirculation vortex that modifies the pressure near the ground. [ABSTRACT FROM AUTHOR]

This paper discusses the relationship between morality and engagement focused on the narratives about climate change. The goal of our research is to understand whether moral grounds identified in individuals and in narratives can influence youth's engagement in environmental debate and news consumption on climate change. Recognizing that people's perceptions of climate change are related to several factors, such as ideas, cultures, and values, we sought to understand whether there is a "green morality" or a prevalence of more responsive moral attributes in individuals when they are exposed to thinking about the environment. We use the Moral Foundations Theory to analyze comments on the environmental news on Twitter and a questionnaire adapted to the environment on moral grounds. The data were collected from Brazil and Portugal between 2021 and 2022. The overall results showed a high incidence of responses with Care/Harm and Fairness/Cheating, and an average incidence of responses related to Loyalty/Betrayal and Authority/Subversion. The results indicate that youngsters show a more prominent moral to care and environmental harm, as well as justice and responsibility, which may influence their interest in the consumption of environmental news and future engagement. In addition, there are factors, such as political issues, that can influence moral values and engagement. [ABSTRACT FROM AUTHOR]

From an extensive search of papers related to the comparison of Global Digital Elevation Models (hereinafter GDEMs), an analysis is carried out that aims to answer several questions such as: Which GDEMs have been compared? Where have the comparisons been made? How many comparisons have been made? How have the assessments been carried out? Which is the GDEM option with the lowest RMSE? Analysis shows that SRTM and ASTER are the most popular GDEMs, that the countries where more comparisons have been made are Brazil, India, and China, and that the main type of reference data for evaluations is the use of points surveyed by GNSS techniques. A variety of criteria have been found for the comparison of GDEMs, but the most used are the RMSE and the standard deviation of the elevation error. There are numerous criteria with a more user-centric character in thematic areas, such as morphometry, geomorphology, erosion, etc. However, in none of the thematic areas does there exist a standard method of comparison. This limits the possibilities of establishing a ranking of GDEMs based on their user-focused quality. In addition, the methods and reference data set are not adequately explained or shared, which limits the interoperability of the studies carried out and the ability to make robust comparisons between them. [ABSTRACT FROM AUTHOR]

Water scarcity due to rainfall variability, and exacerbated by climate change, is prevalent in many regions of the world. Lack of precipitation and excessive water extraction contribute to the intensification of the problem. Among different mitigation measures, rain enhancement through cloud seeding could be a tool as part of a water management strategy to replenish ground water sources. However, implementation of this technology requires proper preliminary analysis of the available cloud data and specific meteorological conditions under which rainfall forms. The aim of this paper is to assess the potential of for rain enhancement in Minas Gerais State in Brazil. The paper focuses on analysis of multiyear climate reanalysis ERA-5, upper air sounding, weather radar and ground stations data. Analysis showed that, between 2000 and 2019, precipitation declined on average by 212 mm per annum or 21% compared to the long term climatological mean. The natural precipitation, however, remains sufficiently high to implement weather modification technology. Assuming an increase of 15–20% could be achieved on a catchment area basis, the increases would be significant and could offset the recently observed decline in natural precipitation. The methodology proposed in this study can be used as a baseline for similar analysis in other vulnerable regions of the world experiencing freshwater shortages or declines. Its shortcomings and uncertainties are also discussed. [ABSTRACT FROM AUTHOR]

Four species of the genus Hedychium can be found in Brazil. Hedychium coronarium is a species endemic to India and Brazil. In this paper, we collected six specimens of H. coronarium for evaluation of their volatile chemical profiles. For this, the essential oils of these specimens were extracted using hydrodistillation from plant samples collected in the state of Pará, Brazil, belonging to the Amazon region in the north of the country. Substance compounds were identified with GC/MS. The most abundant constituent identified in the rhizome and root oils was 1,8-cineole (rhizome: 35.0–66.1%; root: 19.6–20.8%). Leaf blade oil was rich in β-pinene (31.6%) and (E)-caryophyllene (31.6%). The results from this paper allow for greater knowledge about the volatile chemical profile of H. coronarium specimens, in addition to disseminating knowledge about the volatile compounds present in plant species in the Amazon region. [ABSTRACT FROM AUTHOR]

Guanabara Bay has been known to be polluted with trash and sewage from the surrounding areas, but health risks from recreational contact with water in the basin have not been well characterized. In this paper, fecal indicator bacteria (FIB) monitoring data are used to predict risks in three different exposure scenarios: (1) bathing in freshwater rivers that discharge into Guanabara Bay, (2) wading in these freshwater rivers, and (3) sailing in Guanabara Bay. Concentrations of indicator bacteria in river samples were measured directly, and concentrations of indicator bacteria in bay samples were sourced from publicly available government data sets. Ratios between pathogens and fecal indicator concentrations were used to estimate risks for five selected pathogens based on the indicator concentrations. The median risk of disease estimated from E. coli indicator concentrations was 1.0, 9.9 × 10−1 and 8.2 × 10−4 for the swimming, wading, and sailing exposure pathways, respectively. Risks estimates based on concentrations of the enterococci indicator bacteria in the sailing exposure scenario were comparable, at 3.4 × 10−4. The sum of total risk estimated from the five selected pathogens was 5.9 × 10−1, 3.6 × 10−1, and 1.0 × 10−3 for the swimming, wading, and sailing exposure pathways, respectively. Estimated risks of swimming and wading in the rivers far exceeded risks associated with U.S. recreational contact standards, while estimated risks for sailing in the bay were well below these risk guidelines. The 95th percentile of the sailing risk was estimated to exceed the U.S. recreational contact risk level. This paper exemplifies an approach to conducting quantitative microbial risk assessments when only fecal indicator bacteria data are available. Context-specific data on the relevant exposure routes, exposure frequency, and site-specific indicator: pathogen ratios were lacking, which ultimately led to uncertainty in the model. This study is intended to provide a framework for estimating GI risk based on fecal indicator concentrations while acknowledging that the substantial variation in indicator:pathogen ratios make the results of such efforts uncertain. [ABSTRACT FROM AUTHOR]

In recent years, much attention has been paid to the use of biopolymers as food packaging materials due to their important characteristics and properties. These include non-toxicity, ease of availability, biocompatibility, and biodegradability, indicating their potential as an alternative to conventional plastic packaging that has long been under environmental scrutiny. Given the current focus on sustainable development, it is imperative to develop studies on biopolymers as eco-friendly and sustainable food packaging materials. Therefore, the aim of this review is to explore trends and characteristics of biopolymer-based biodegradable films for food packaging, analyze the contribution of various journals and cooperation between countries, highlight the most influential authors and articles, and provide an overview of the social, environmental, and economic aspects of biodegradable films for food packaging. To achieve this goal, a bibliometric analysis and systematic review based on the PRISMA method were conducted. Relevant articles were carefully selected from the Scopus database. A bibliometric analysis was also conducted to discuss holistically, comprehensively, and objectively biodegradable films for food packaging. An increasing interest was found in this study, especially in the last 3 years with Brazil and China leading the number of papers on biodegradable films for food packaging, which were responsible for 20.4% and 12.5% of the published papers, respectively. The results of the keyword analysis based on the period revealed that the addition of bioactive compounds into packaging films is very promising because it can increase the quality and safety of packaged food. These results reveal that biodegradable films demonstrate a positive and promising trend as food packaging materials that are environmentally friendly and promote sustainability. [ABSTRACT FROM AUTHOR]

The gaps observed in entities' traditional reports and accounts led to the emergence of the integrated report (IR), which includes several content elements, namely the component relating to risks and opportunities. Within this scope, the specific risks that may affect an organization's capacity to create value are disclosed, among others, which is information of interest to the different stakeholders. This paper aims to identify the explanatory factors that influence the disclosure of risks in IRs. For this purpose, the IRs of entities listed on the Brazilian stock exchange for the year 2020 were assessed. The study was based on the explanatory theories of risk disclosure usually found in the literature, namely, the legitimacy, the agency, the signaling, and the upper echelon theories. Linear regression models were used with the disclosure rates of different types of risk as dependent variables. The size, profitability, indebtedness, independence, and gender diversity in the board of directors (BD), audit, and activity sector comprised the selected explanatory factors. Associations were found between some of the types of risks disclosed and the size of the entity, the existence of an audit, the independence of the BD, and the activity sector. The paper contributes to the literature about the explanatory factors of risk disclosure by exploring its analysis with different typologies and attributes, having the IR as a source of information, which is still little explored. The scientific contribution encompasses proposing a new risk analysis model in the IR. The innovative elements also comprise the classification of risks related to sustainable development (SD), including environmental, social, and governance (ESG) factors. [ABSTRACT FROM AUTHOR]

The relationship between culture and the individual is a central focus of social scientific research. This paper examines motivations that mediate between shared culture norms and individual actions. Inspired by the works of Leon Festinger and Melford Spiro, we posit that social network conformation (the perceived adherence of one's social network with norms) and internalization of cultural norms (incorporation of cultural models with the self-schema) will differentially shape behavior (cultural consonance) depending on the domain and individual characteristics. For the domain of gender roles among Brazilian men, religious affiliation results in different configurations of the individual and culture. Our findings suggest that, due to changing and competing cultural models, religious men are compelled to reflexively "think" about what masculinity means to them, rather than subconsciously conform to social (hegemonic) expectations. This study demonstrates the importance of considering the impetus of culturally informed behaviors and, in doing so, provides a methodological means for measuring and interpreting such motivations, an important factor in the relationship between culture and the individual. [ABSTRACT FROM AUTHOR]

A registered trademark represents one of a company's most valuable intellectual assets, acting as a safeguard against possible reputational damage and financial losses resulting from infringements of this intellectual property. To be registered, a mark must be unique and distinctive in relation to other trademarks which are already registered. In this paper, we describe the CMAD, an acronym for Conflicting Marks Archive Dataset. This dataset has been meticulously organized into pairs of marks (Number of pairs = 18,355) involved in copyright infringement across word, figurative and mixed marks. Organizations sought to register these marks with the National Institute of Industrial Property (INPI) in Brazil, and had their applications denied after analysis by intellectual property specialists. The robustness of this dataset is ensured by the intrinsic similarity of the conflicting marks, since the decisions were made by INPI specialists. This characteristic provides a reliable basis for the development and testing of tools designed to analyze similarity between marks, thus contributing to the evolution of practices and computer-based solutions in the field of intellectual property. Dataset:  https://doi.org/10.5281/zenodo.10608109 Dataset License: CC-BY 4.0 [ABSTRACT FROM AUTHOR]

Data breaches result in data loss, including personal, health, and financial information that are crucial, sensitive, and private. The breach is a security incident in which personal and sensitive data are exposed to unauthorized individuals, with the potential to incur several privacy concerns. As an example, the French newspaper Le Figaro breached approximately 7.4 billion records that included full names, passwords, and e-mail and physical addresses. To reduce the likelihood and impact of such breaches, it is fundamental to strengthen the security efforts against this type of incident and, for that, it is first necessary to identify patterns of its occurrence, primarily related to the number of data records leaked, the affected geographical region, and its regulatory aspects. To advance the discussion in this regard, we study a dataset comprising 428 worldwide data breaches between 2018 and 2019, providing a visualization of the related statistics, such as the most affected countries, the predominant economic sector targeted in different countries, and the median number of records leaked per incident in different countries, regions, and sectors. We then discuss the data protection regulation in effect in each country comprised in the dataset, correlating key elements of the legislation with the statistical findings. As a result, we have identified an extensive disclosure of medical records in India and government data in Brazil in the time range. Based on the analysis and visualization, we find some interesting insights that researchers seldom focus on before, and it is apparent that the real dangers of data leaks are beyond the ordinary imagination. Finally, this paper contributes to the discussion regarding data protection laws and compliance regarding data breaches, supporting, for example, the decision process of data storage location in the cloud. [ABSTRACT FROM AUTHOR]

In this paper, the influence of different fiber materials on the dynamic splitting mechanical properties of concrete was investigated. Brazil disc dynamic splitting tests were conducted on plain concrete, palm fiber-reinforced concrete, and steel fiber-reinforced concrete specimens using a split Hopkinson pressure bar (SHPB) test device with a 100 mm diameter and a V2512 high-speed digital camera. The Digital Image Correlation (DIC) technique was used to analyze the fracture process and crack propagation behavior of different fiber-reinforced concrete specimens and obtain their dynamic tensile properties and energy dissipation. The experimental results indicate that the addition of fibers can enhance the impact toughness of concrete, reduce the occurrence of failure at the loading end of specimens due to stress concentration, delay the time to failure of specimens, and effectively suppress the expansion of cracks. Steel fibers exhibit a better crack-inhibiting effect on concrete compared to palm fibers. The incident energy for the three types of concrete specimens is roughly the same under the same impact pressure. Compared with plain concrete, the energy absorption rate of palm fiber concrete is decreased, while that of steel fiber concrete is increased. Palm fiber-reinforced concrete and steel fiber-reinforced concrete have lower peak strains than plain concrete under the same loading duration. The addition of steel fibers significantly impedes the internal cracking process of concrete specimens, resulting in a relatively slow growth of damage variables. [ABSTRACT FROM AUTHOR]

This paper augments the sparse literature on the inflationary impact of foreign debt in Brazil while addressing methodological caveats in previous studies. We depart from the linearity assumption and employ two nonlinear techniques: the nonlinear autoregressive distributed lag (NARDL) model and a Markov Switching Regression (MSR) to investigate the connection between foreign debt and inflation within a multivariate framework. The analyses consider the presence of structural breaks via assessing variable stationarity using the Zivot and Andrew unit root test and incorporating a residual-based cointegration test proposed by Gregory and Hansen. Additionally, we apply a multiple structural breakpoints test by Bai and Perron to determine the presence of structural breaks in the impact of foreign debt on inflation. Our findings robustly indicate that the domestic money supply has a statistically significant positive effect, while the nominal effective exchange rate has a negative effect on inflation in both the short and long run. The NARDL model reveals that only positive changes in foreign debt have a statistically significant negative effect on inflation in the short run, whereas both positive and negative foreign debt changes significantly affect inflation in the long run. The results from the MSR model are generally consistent with those of the NARDL model. [ABSTRACT FROM AUTHOR]

Attitude verbs describe mental states of their subject in relation to a proposition codified by their clausal complement. In this paper, we describe the behavior of such verbs in Karitiana, a Tupian language spoken in Brazil. Recently, it has been noted in the literature that embedded clauses with nominal features seem to lead to a factive reading of these verbs. In Karitiana, all embedded clauses are nominalized since they lack many clausal features, and conversely exhibit nominal distribution and behavior. We propose a structure with an N head for embedded clauses in Karitiana, which accounts for their morphological behavior and also explains why these constructions behave as strong islands. Judgments of contradiction with attitude verbs of Karitiana were collected and the results show that they fall into two categories: one that obligatorily entails the truth of the embedded clause and another that favors it, but that does not require it obligatorily. This shows that nominalization of embedded clauses seems to be tied to the presence of factive entailments, but this alone is not a sufficient condition to force a factive reading of the matrix attitude verb. [ABSTRACT FROM AUTHOR]

This paper discusses how pluractionality is expressed in Macuxi (Cariban), a South American Indigenous language spoken in Brazil, Guyana and Venezuela. Cross-linguistically, the multiplicity of an action can be expressed by means of specialized pluractional morphemes affixed on verbs, via adverbs, or by reduplication. Previous work on Macuxi claimed that the iterative suffix -pîtî indicates a multiplicity of actions, whereas verbal reduplication is mentioned but scarcely described, and is associated with the interpretation of multiple events. Based on data from context-based elicitation, we show that verbal reduplication is impacted by Aktionsart (activity and semelfactive verbs, which denote unbounded, atelic events, have a higher tendency to be reduplicated) and that reduplicated verbs are often associated with an intensity interpretation. On the other hand, the suffix -pîtî functions as a pluractional marker that encodes a multiplicity of events and is predictable via a Lasersohnian analysis. [ABSTRACT FROM AUTHOR]

Web Geographic Information Systems (WebGISs) were widely used to monitor COVID-19 cases and deaths during the pandemic. Furthermore, geotechnologies were also very useful in education, public management, tourism, and other areas. Although there are WebGISs with a high level of sophistication, most are simple, consisting of geovisualizers of cases, deaths, and vaccinations. This study develops a WebGIS that offers information about age, comorbidities, and tests, which can be analyzed from specific points such as hospitals, main access roads, regions, or neighborhoods. Although it is not a highly sophisticated solution, the WebGIS developed in this study is especially useful for municipal governments in developing countries like Brazil that do not have patient health data in geographic databases. The WebGIS developed in this study offers public managers essential information for developing effective public policies to combat the COVID-19 pandemic and other epidemiological phenomena such as dengue and malaria. [ABSTRACT FROM AUTHOR]

During the COVID-19 pandemic, regions were affected by a combination of economic crises: weak demand and constrained supply. Several studies have sought to analyse the heterogeneous effects of supply and demand shocks on the labour market, economic growth, and the environment. This study has a different focus, estimating both direct and indirect effects of demand and supply shocks adopted during the pandemic in Brazil and Chile. Afterwards, the paper compares the degree of regional absorption (leakage) of income resulting from each of these shocks, applying an interregional input–output model for each country. The results of this study show that income absorption by the poorest regions is relatively greater in the case of a supply shock. It can be said, therefore, that this type of shock improves the retention of income generated in the poorest regions, favouring the development of these localities and the reduction in regional inequalities. The main reason for this result is that supply policies have restricted essential sectors to a lesser extent, and these sectors are generally less concentrated in large urban centres in both Brazil and Chile. In other words, much of the interregional leakage is driven by the demand for non-essential products, mainly in the richest urban economy centres. Finally, the geographical dimension of regional inequalities leads to the economic benefit of prosperous areas in the country when shocks occur in vulnerable regions, highlighting the centre–periphery pattern in both countries. [ABSTRACT FROM AUTHOR]

The financial inclusion (FI) literature claims that expanding access of the poor to consumer credit in the formal financial system is an instrument to alleviate poverty. This view has been increasingly challenged by the financialization literature, which highlights unsustainable indebtedness of low-income borrowers following the introduction of FI policies. While a welcome contribution and antidote to mainstream assessments, much of the financialization literature on Brazil has, to date, focused on a macro-oriented analysis. As a major testing ground for FI, a better understanding of these dynamics in Latin America's largest country deepens our understanding of the socio-economic consequences of inserting poor populations into the financial system. This paper contributes to the financialization literature by drawing on interviews conducted in a Rio de Janeiro slum to understand how debt dynamics operate in everyday life, along with its structural conditioners. It shows that FI policies provide limited consumption smoothing and instead increase the structural vulnerability of low-income households. Wage and welfare support along with greater oversight and control of financial products supplied to low-income borrowers are warranted. [ABSTRACT FROM AUTHOR]

Infection containment in the post-pandemic scenario became a top priority for healthcare engineering control staffers, especially in pneumology sectors, where the treatment of airborne infectious diseases is frequent. In Brazil, where COVID-19 left a long record of casualties, there is a lack of information on the influence of filtration systems on the maintenance of regulated operational conditions for indoor comfort in hospital environments. This paper has the following objectives: to study arrangements of filtering systems in hospital acclimatization ducts; to verify how filtering characteristics could compromise safety regulations for airflow in hospital environments; and to identify airflow stagnation points that might favor suspended viral concentrations and increase contamination risks. We used the computational fluid dynamics STAR-CCM+© software to perform numerical simulations of different cases of indoor airflow in a model corresponding to a sector of the Lauro Wanderley University Hospital (João Pessoa city, Brazil). We concluded that standards for maximum velocity are reachable despite thinner or thicker filters affecting the spread of the air. In this way, acclimatization systems are limited by a tradeoff between regulation and protection. Our findings are relevant to future technological development, interventions, safety strategies amidst contamination scenarios, and new filtration arrangements in hospital environments. [ABSTRACT FROM AUTHOR]

The evidence of climate change has increased the necessity for actions to avoid severe consequences for future generations. Recognising the benefits of sustainable and energy-efficient buildings has led to the development of several methods to estimate and rate the performance of building. Healthcare buildings are functional and dynamic structures that support their occupants' healing processes and comfort. They have a significant role in society and specific goals in merging their strategic planning requirements (cost reduction, regulatory compliance, social responsibility, and performance improvement) with Sustainable Development Goals. Therefore, this paper addresses critical issues regarding the sustainability of the Brazilian healthcare sector by analysing the suitability of the most common international healthcare building sustainability assessment methods to the specific social, economic, and environmental contexts of the Brazilian healthcare sector. The paper analyses the HBSAtool-PT, a sustainability assessment method developed for this type of building, and identifies the possibilities for adapting to the Brazilian context. As a result, this research proposes a framework to assess the sustainability of healthcare buildings in Brazil. In the framework's definition, a survey was conducted to determine the opinion of building stakeholders regarding the importance of indicators. A weighing system for the proposed sustainability indicators was developed using the AHP method. [ABSTRACT FROM AUTHOR]

Permeable pavements have been the subject of numerous studies in recent decades. The possibility of dissipating stormwater more smoothly and generating numerous benefits to the environment and users makes the use of permeable pavements an excellent possibility of integration into sustainable and resilient water management systems in cities. In Brazil, numerous studies on the quantity and quality of infiltrated water, permeability of the coating, clogging, environmental burden, and feasibility, among other characteristics, have been researched. Within this theme, the Federal University of Santa Catarina (UFSC) has contributed with ten papers in the research of permeable pavements in the last six years, which address various topics about the effectiveness and applicability of permeable pavements. This paper reviews the studies conducted at UFSC on permeable pavements and discusses the different results within the main issues found. In general, the selected documents addressed seven themes in the studies: potential for potable water savings, clogging, quantity and quality of the water infiltrated into the pavement, Life Cycle Assessment (LCA) and its variants, and hydraulic and structural design details. More specifically, many selected papers assess the potential use of stormwater harvested through permeable pavements in non-potable uses of buildings. The possibility of aligning the benefits of green infrastructure with the rational use of water expands the advantages of the system and can help prevent future water scarcity, as well as reduce the environmental impacts of paving. [ABSTRACT FROM AUTHOR]

The quality of electricity is one of the most discussed issues in the regulatory context, structured by guidelines that allow the assessment of efficiency in electricity supply. Regarding electricity distribution systems, it is essential to highlight the aspects associated with the definition of continuity indicators to measure the service provided by the utilities. The parameters used to calculate the indicators are set by specific agencies in each country based on studies and their characteristics. With the growth in demand for electricity, debates associated with reducing greenhouse gas emissions in the atmosphere, and the increase in Distributed Energy Resources (DERs) connected to the grid, a new trend related to the energy supply is verified. Given these new scenarios, this paper presents a literature review in the regulatory field of existing distribution systems in South American countries. The research proposes to analyze, compare, and expose the current models to evaluate their methods and indicators, including a complete case study in Brazil. This paper seeks to illustrate and point out perspectives, challenges, and future perspectives through the collected and analyzed data. [ABSTRACT FROM AUTHOR]

The world is moving towards a low-carbon economy through renewable energy sources. In this context, concentrating solar power (CSP) technologies can exploit the rich solar resource in Brazil, diversifying the national electricity mix. The aim of this paper is to support the insertion of CSP generation in the Brazilian bottom-up model MATRIZ by analyzing the environmental performance of three CSP technologies: (i) solar tower power (STP) with a thermal storage system (TSS) of 7.5 h; (ii) solar thermal parabolic trough (STPT) with a TSS of 6 h; and (iii) STPT without TSS. From a life cycle perspective, their freshwater consumption and greenhouse gas (GHG) emissions are addressed by employing the software SimaPro, the Ecoinvent database, and the ReCiPe 2016 method, as well as information from the system advisory model (SAM) and the literature. As a result, STP is the most environmentally sound CSP alternative, presenting lower GHG emissions and water consumption than the two STPT technologies. In general, CSP generation proves to be more environmentally attractive than some fossil-fired power plants and renewable energy sources. Moreover, moving the manufacturing of CSP technologies to Brazil has the potential to reduce GHG emissions from the upstream processes of their value chain. [ABSTRACT FROM AUTHOR]

Leakages in water distribution systems (WDSs) profoundly affect their operations, elevating water production demand and treatment and pumping costs. Moreover, they strain the energy system by increasing power requirements at pumping stations. In regions heavily reliant on hydropower, such as Brazil, there is a nuanced implication: diminishing reservoir water levels due to increased WDS flow withdrawal. This not only immediately affects hydropower generation by reducing available head but, over time, may lead to interruptions in hydropower generation. This paper investigates the water–energy nexus, specifically focusing on WDS leakages in Brazil. It begins with an overview of the current situation and future outlook, considering evolving policies to enhance WDS efficiency and also the evaluation of different climate change scenarios. A more in-depth case study explores a reservoir utilized for both energy and water production. In this context, leakage management assumes critical importance, given the various water uses within the reservoir that impact the available energy and water resources. Overall, this study offers a comprehensive perspective on the water–energy nexus within WDSs, underscoring the critical importance of leakage control and its direct and indirect consequences, particularly on energy generation capacity, the environment, and the economy. [ABSTRACT FROM AUTHOR]

The global pandemic of 2019 brought heightened awareness to institutions of higher education of the need to engage in a digital transformation that extends beyond university business operations to the pedagogy of the classroom. This paper is a case study that explores three international cases of universities in Colombia, Brazil, and Mongolia that are at different stages along the path of a digital pedagogical transformation. This article tells each story, including (1) what is driving the local need to engage in digital transformation, (2) what the major challenges and barriers are to achieving a transformation, and (3) what efforts are being made to help each university to move along the path towards adoption and change. It concludes with discussing three major themes that emerged from the case studies: (1) the role of local policy in shaping digital transformation, (2) the importance of developing human capacity with technology, and (3) the potential for digital transformation to bring hope. [ABSTRACT FROM AUTHOR]

The genus Culex has 817 species subdivided into 28 subgenera. It has a cosmopolitan distribution, being most abundant in countries with a tropical climate. Understanding the ecology and diversity of viruses circulating in the species of this genus is important for understanding their role as arbovirus vectors in Brazil. To conduct an integrative review to identify the importance of the Culex genus as arbovirus vectors in Brazil. A search was carried out for scientific papers in the PubMed, BVSalud, Patuá-IEC and International Catalogue of Arboviruses: including certain other viruses of vertebrates databases. 36 publications describing arbovirus detections in Culex mosquitoes collected in the field in Brazil were evaluated. A total of 42 arbovirus species were detected, as well as studies analyzing the vector competence of C. quinquefasciatus for the transmission of four different arboviruses. The study of the Culex genus and its role as a vector of arboviruses in Brazil is essential for understanding transmission cycles, with the main aim of reducing cases of human infection. Thus, entomovirological surveillance guides the implementation of actions to detect circulating arboviruses among vectors to anticipate measures aimed at preventing or reducing the risk of arbovirus outbreaks in the country. [ABSTRACT FROM AUTHOR]

In 1973, the National Rabies Program was created in Brazil through an agreement between the Ministry of Health and Agriculture. Since its beginning, it developed integrated action through access to free post-exposure prophylaxis (PEP) for people at risk, dog vaccination campaigns, a joint surveillance system, and awareness. This study aims to describe human rabies in Brazil under the One Health perspective in recent decades, including achievements in the control of dog-mediated cases and challenges in human cases transmitted by wild animals. This paper also explores possible drivers of human rabies in the Northeast Region with half of the cases. The first part of this study was descriptive, presenting data and examples by periods. Statistical analysis was performed in the last period (2010–2022) to explore possible drivers. Dog-mediated human cases decreased from 147 to 0, and dog cases decreased from 4500 to 7. A major challenge is now human cases transmitted by wild animals (bats, non-human primates, and wild canids). Most current human cases occur in municipalities with a tropical and subtropical moist broadleaf forest biome and a Gini index higher than 0.5. In the multivariable analysis, an association with temperature was estimated (OR = 1.739; CI95% = 1.181–2.744), and primary healthcare coverage (OR = 0.947; CI95% = 0.915–0.987) was identified as a protector. It is possible to significantly reduce the number of dog-mediated human rabies cases through the efforts presented. However, Brazil has wildlife variants of the rabies virus circulating. The association of human cases with higher temperatures in the Northeast is a concern with climate change. To reduce human cases transmitted by wild animals, it is important to continue distributing free PEP, especially in remote at-risk areas in the Amazon Region, and to increase awareness. [ABSTRACT FROM AUTHOR]

On average, 70% of the world's freshwater is used in agriculture, with farmers transitioning to electrical irrigation systems to increase productivity, reduce climate uncertainties, and decrease water consumption. In Brazil, where agriculture is a significant part of the economy, this transition has reached record levels over the last decade, further increasing the impact of energy consumption. This paper presents a methodology that utilizes the U-Net model to detect flooded rice fields using Sentinel-2 satellite images and estimates the electrical energy consumption required to pump water for this irrigation. The proposed approach involves grouping the detected flooded areas using k-means clustering with the electricity customers' geographical coordinates, provided by the Power Distribution Company. The methodology was evaluated in a dataset of satellite images from southern Brazil, and the results demonstrate the potential of using U-Net models to identify rice fields. Furthermore, comparing the estimated electrical energy consumption required for irrigation in each cluster with the billed energy values provides valuable insights into the sustainable management of rice production systems and the electricity grid, helping to identify non-technical losses and improve irrigation efficiency. [ABSTRACT FROM AUTHOR]

The delineation of management zones is one of the ways to enable the spatially differentiated management of plots using precision agriculture tools. Over the years, the spatial variability of data collected from soil and plant sampling started to be replaced by data collected by proximal and orbital sensors. As a result, the variety and volume of data have increased considerably, making it necessary to use advanced computational tools, such as machine learning, for data analysis and decision-making support. This paper presents a methodology used to establish management zones (MZ) in precision agriculture by analyzing data obtained from soil sampling, proximal sensors and orbital sensors, in experiments carried out in four plots featuring soybean–cotton and soybean–corn crops, in Mato Grosso and Paraná states, Brazil. Four procedures were evaluated, using different input data sets for the MZ delineation: (I) soil attributes, including clay content, apparent electrical conductivity or fertility, along with elevation, yield maps and vegetation indices (VIs) captured during the peak crop biomass period; (II) soil attributes in conjunction with VIs demonstrating strong correlations; (III) solely VIs exhibiting robust correlation with soil attributes and yield; (IV) VIs selected via random forests to identify the importance of the variable for estimating yield. The results showed that the VIs derived from satellite images could effectively replace other types of data. For plots where the natural spatial variability can be easily identified, all procedures favor obtaining MZ maps that allow reductions of 40% to 70% in yield variance, justifying their use. On the other hand, in plots with low natural spatial variability and that do not have reliable yield maps, different data sets used as input do not help in obtaining feasible MZ maps. For areas where anthropogenic activities with spatially differentiated treatment are already present, the exclusive use of VIs for the delineation of MZs must be carried out with reservations. [ABSTRACT FROM AUTHOR]

The Brazilian housing program, Minha Casa, Minha Vida (MCMV) (My House, My Life), was launched in 2009 to address the housing deficit issue, with the goal of distributing contracted housing units throughout the Brazilian territory. However, the program faces criticisms regarding the distribution of these units. Thus, this paper aims to analyze the distribution heterogeneity of these contracted housing units (CHUs). Two analytical approaches were employed: temporal and spatial (states). To achieve this objective, inferential methods such as Ordinary Least Squares (OLS), Spatial Autoregressive Model (SAR), and panel data regressions were employed. The findings indicate that, from a temporal perspective, there is a positive relationship between the urban housing deficit (UHD) and CHUs. However, the relationship is negative from a spatial perspective, characterizing such heterogeneity among the states. In addition, bordering regions are subject to mutual spatial influences in terms of contracted units, thereby reinforcing this heterogeneity over time. [ABSTRACT FROM AUTHOR]

Codes of practices and standards for products and activities are available regulations for global sectors, although they are dedicated to national scopes such as civil construction in Brazil. These regulations align with industry compliance as they establish mandatory or voluntary issues. Brazilian developers must properly regard construction regulations, which mostly dedicated to concrete and steel buildings but rarely to timber buildings. Through construction regulations, the production of timber buildings can become more standardized and scalable to ensure the steady quality of finished products. From this perspective, this paper evaluated Brazil's timber housing production sector's utilization and access to procedures, standards, guidelines, certifications, and seals. A standardized questionnaire was designed and refined to analyze this local perspective. Face-to-face interviews with sampled companies were conducted using a randomized sampling procedure. The margin of error was obtained using significant sampling of this sector. The findings evinced that most Brazilian developers underuse timber building regulations in their production and management practices and still need to familiarize themselves with this important subject. The codes must establish requirements for each timber construction technique to represent different technologies and also specify particularities and added performances to suit varied projects. [ABSTRACT FROM AUTHOR]