Search

High raw material prices and rivalry from the food industry have hampered the adoption of renewable resource-based goods. It has necessitated the investigation of cost-cutting strategies such as locating low-cost raw material supplies and adopting cleaner manufacturing processes. Exploiting waste streams as substitute resources for the operations is one low-cost option. The present study evaluates the environmental burden of biopolymer (polyhydroxyalkanoate) production from slaughtering residues. The sustainability of the PHA production process will be assessed utilising the Emergy Accounting methodology. The effect of changing energy resources from business as usual (i.e., electricity mix from the grid and heat provision utilising natural gas) to different renewable energy resources is also evaluated. The emergy intensity for PHA production (seJ/g) shows a minor improvement ranging from 1.5% to 2% by changing only the electricity provision resources. This impact reaches up to 17% when electricity and heat provision resources are replaced with biomass resources. Similarly, the emergy intensity for PHA production using electricity EU27 mix, coal, hydropower, wind power, and biomass is about 5% to 7% lower than the emergy intensity of polyethylene high density (PE-HD). In comparison, its value is up to 21% lower for electricity and heat provision from biomass. [ABSTRACT FROM AUTHOR]

Proper treatment and disposal of industrial pollutants of all kinds are a global issue that presents significant techno-economical challenges. The presence of pollutants such as heavy metal ions (HMIs) and organic dyes (ODs) in wastewater is considered a significant problem owing to their carcinogenic and toxic nature. Additionally, industrial gaseous pollutants (GPs) are considered to be harmful to human health and may cause various environmental issues such as global warming, acid rain, smog and air pollution, etc. Conductive polymer-based nanomaterials have gained significant interest in recent years, compared with ceramics and metal-based nanomaterials. The objective of this review is to provide detailed insights into different conductive polymers (CPs) and their nanocomposites that are used as adsorbents for environmental remediation applications. The dominant types of CPs that are being used as adsorbent materials include polyaniline (PANI), polypyrrole (Ppy), and polythiophene (PTh). The various adsorption mechanisms proposed for the removal of ODs, HMIs, and other GPs by the different CPs are presented, together with their maximum adsorption capacities, experimental conditions, adsorption, and kinetic models reported. [ABSTRACT FROM AUTHOR]

Pyrolysis behavior of ionic liquid (IL) pretreated coal and sugarcane bagasse (SCB) blends through thermogravimetric analysis (TGA) was studied. Three blends of coal and SCB having 3:1, 1:1, and 1:3 ratios by weight were treated with 1-ethyl-3-methylimidazolium chloride ([Emim][Cl]) at 150 °C for 3 h. Untreated and IL treated blends were then analyzed under pyrolytic conditions in a TGA at a constant ramp rate of 20 °C/min. Kinetic and thermodynamic parameters were evaluated using ten Coats-Redfern (CR) models to assess reaction mechanism. Results showed that the untreated blends followed a definite pattern and were proportional to the concentration of SCB in the blends. IL treated blends exhibited a higher average rate of degradation and total weight loss, indicating that IL had disrupted the cross-linking structure of coal and lignocellulosic structure of SCB. This will enhance the energy generation potential of biomass through thermochemical conversion processes. The lower activation energy (Ea) was calculated for IL treated blends, revealing facile thermal decomposition after IL treatment. Thermodynamic parameters, enthalpy change (ΔH), Gibbs free energy change (ΔG), and entropy change (ΔS), revealed that the pyrolysis reactions were endothermic. This study would help in designing optimized thermochemical conversion systems for energy generation. [ABSTRACT FROM AUTHOR]