Search

A dislocation density-based model for alloy 718 in the annealed state is proposed in order to accurately describe the deformation behavior of this alloy for a wide range of thermo-mechanical loadings. The model accounts for numerous microstructural mechanisms, including strain hardening, grain size effect, dynamic strain aging (DSA), solid solution strengthening, as well as phonon and electron drag which affects dislocation movements at high strain rates. Two types of recovery mechanisms are also included: recovery due to dislocation glide and recovery associated with cross-slip of screw dislocations. The model is calibrated using experimentally determined stress–strain curves for both low and high strain rates in the order of 10–3 to 103 s−1, and for temperatures in the range 20 °C to 800 °C. The stress–strain data computed with the model are in good agreement with the experimental data. The inclusion of DSA is found to be effective in the combination of temperatures and strain rates corresponding to experimental observations. The solid solution strengthening contribution increases with decreasing temperature and increasing strain rate. The drag effect in the model proves to be significant only for deformation at high strain rate (~ 103 s−1), Godkänd;2023;Nivå 0;2023-04-20 (hanlid);Konferensartikel i tidskrift;Licens full text: Metallurgical and Materials Transactions A articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence)., European Network for Alloys Behaviour Laws Enhancement (ENABLE) project

The current study presents the effects of strain and temperature on the mechanical response and microstructure evolution in AA7075-T651 at high strain rates. Compression tests have been performed at room temperature (RT), 200, 300 and 400 °C using a Split-Hopkinson pressure bar (SHPB) setup with strain rates ranging between 1400 and 5300 s−1. For deformation at RT, the flow stress increases with increase in strain rate. Whereas deformation at elevated temperatures show a non-monotonous behavior of the flow stress with respect to the strain rate. This trait is attributed to the pronounced effects from the adiabatic shear bands (ASBs); namely, distorted shear bands (DSBs) and transformed shear bands (TSBs); and cracks resulting from the plastic deformation instability during hot deformation. The sequence of microstructure evolution is: inhomogeneity in the initial microstructure – DSB – TSB – crack –fracture. The feasibility of formation and growth of ASBs and cracks increases with increase in strain and temperature, neglecting any significant effect from the strain rate. During the compression tests, temperature of the material rises due to adiabatic heating. Considering a certain strain developed in the material, this adiabatic temperature rise decreases as the deformation temperature is increased. Furthermore, during individual deformation processes, the temperature rise increases with increasing strain. The adiabatic temperature leading to the formation of TSB is approximated to be 0.7 times of the melting temperature of the alloy. These results from the current study are to be used in developing a physics-based material model for the alloy., Validerad;2022;Nivå 2;2022-09-06 (johcin);Funder: ENABLE project funded by the European Union’s Marie Skłodowska-Curie Actions (MSCA) Innovative Training Networks (ITN) H2020-MSCA-ITN-2017 under the Grant Agreement No 764979.;This article has previously appeared as a manuscript in a thesis.

H2020-MSCA-ITN-2017 - grant agreement 764979

To study the deformation behavior and recrystallization of alloy 718 in annealed and aged state, compression tests were performed using Split-Hopkinson pressure bar (SHPB) at high strain rates (1000 to 3000 s−1), for temperatures between 20 °C and 1100 °C (293 K to 1373 K). Optical microscope (OM) and electron back-scatter diffraction (EBSD) technique were employed to characterize the microstructural evolution of the alloy. The stress–strain curves show that the flow stress level decreases with increasing temperature and decreasing strain rate. In addition, up to 1000 °C, the aged material presents higher strength and is more resistant to deformation than the annealed one, with a yield strength around 200 MPa higher. For both states, dynamic and meta-dynamic recrystallization occurred when the material is deformed at 1000 °C and 1100 °C, leading to a refinement of the microstructure. As necklace structures were identified, discontinuous recrystallization is considered to be the main recrystallization mechanism. The recrystallization kinetics is faster for higher temperatures, as the fraction of recrystallized grains is higher and the average recrystallized grain size is larger after deformation at 1100 °C than after deformation at 1000 °C., Validerad;2021;Nivå 2;2021-11-18 (beamah);For correction, see: Moretti, M. A., Dalai, B., Åkerström, P. et al. Correction to: High Strain Rate Deformation Behavior and Recrystallization of Alloy 718. Metallurgical and Materials Transactions A 53, 2796 (2022). https://doi.org/10.1007/s11661-022-06676-4, H2020 MSCA-ITN-2017 grant agreement Nº764979 - ENABLE project