Search

Computed tomography (CT) may more accurately assess the healing of grafted osteolytic lesions around acetabular components compared with plain radiographs, although clinical validation is lacking. To determine whether clinical or micro-CT imaging could assess accurately the grafted lesion compared with histology, we therefore quantified bone healing and ingrowth to determine an effective rhBMP-2 dose and ratio to allograft bone when grafted adjacent to a cementless porous-coated component. We grafted surgically created acetabular defects in canines (n = 20) before uncemented total hip arthroplasty. At 6 weeks, embedded acetabula were imaged and the CT slice images matched to histology section images. The percentage of bone in the defect and growth into the porous surface was assessed quantitatively. Low-dose rhBMP-2 with allograft (1:5 ratio) resulted in a higher percentage of defect healing (43.8%) than rhBMP-2 alone (29.2%) and a higher percentage of bone ingrowth (15.7%) than allograft bone alone (1.1%) as measured by histology. Micro-CT measurements were similar to histologic measurements of defect healing, whereas clinical CT overestimated periprosthetic bone by 38%. Neither clinical CT nor micro-CT techniques are adequate for assessing ingrowth or the bone-implant interface with metal artifacts. [ABSTRACT FROM AUTHOR]

The advantages of pedicle screw fixation depend on their ability to retain bony purchase until the fusion mass is stable. Osteoporotic bone and removal and replacement of pedicle screws in revision procedures substantially reduce screw mechanical fixation strength and can lead to clinical failure. The objective of this study was to determine if an expansive pedicle screw design could be used to improve biomechanical fixation in bone of compromised quality. Axial mechanical pullout testing was performed on paired expansive and conventional pedicle screws placed in fresh, unembalmed cadaveric vertebrae. Bone mineral density measurements (made using a dual-energy X-ray absorption meter) were used to characterize bone quality. A preliminary clinical and radiographic evaluation of 14 patients was also performed at a minimum 2-year follow-up. The mean axial pullout force in bone of all qualities was increased 30% when the expansive pedicle screw design was used. This included an appropriate 50% increase in pullout force in bone of poor quality (low bone mineral density). The preliminary clinical and radiographic results were supportive of the biomechanical design rationale and mechanical testing. The results were similar to those expected for spinal instrumentation using pedicle screws, even though compromised bone was present in two thirds of the cases in which the expansive screw was used.

Objective: To assess the radiographic, histologic, and mechanical characteristics of new bone formation in large segmental bone defects treated with a new osteoconductive material, recombinant human osteogenic protein-1 (rhOP-1)., Design: In vivo animal study., Intervention: Sixteen dogs (thirty-two limbs) with an ulna segmental defect (2.5 centimeters) were randomized to three treatment groups: rhOP-1, collagen alone, and no implant., Main Outcome Measurements: Radiographic evidence of defect healing, mechanical testing (torsional strength) as compared with thirty-one control intact dog ulnas, and histologic analysis., Results: At twelve weeks, complete radiographic healing was observed in twenty-five of twenty-eight defects (89 percent) treated with rhOP-1. The mechanical strength of the rhOP-1-treated defects at twelve weeks was 65 percent of that of intact ulnas. Histologic analysis revealed that defects treated with rhOP-1 were bridged with lamellar and woven bone that was in continuity with the host bone., Conclusions: The results indicate that osteoinductive materials, which have the ability to quickly fill and heal large defects, may have advantages over osteoconductive materials, which are typically used to fill smaller non-load-bearing bone voids.

Study Design: Infection of rhesus monkeys (Macaca mulatta) with simian immunodeficiency virus (SIV, HIV-II) was used to study disease transmission in allograft bone. Four allograft bone processing techniques--fresh, fresh frozen, double freeze-thaw, and double freeze-thaw with chemical decontamination--were evaluated., Objectives: To determine if SIV could be transmitted in allograft bone and if processing techniques could be used to eliminate the potential for disease transmission., Summary of Background Data: Although the risk of HIV transmission in bone allograft was reported to be low, HIV transmission had occurred. In all cases, frozen allograft was used. Donor screening and serologic testing significantly reduced the risk of transmission, although a window of time existed in which an individual was infected but had not seroconverted. Experimental infection of rhesus monkeys with SIV induced a disease syndrome similar to AIDS and provided an ideal model to study disease transmission., Methods: Corticocancellous cylinders were obtained aseptically from SIV-infected rhesus monkeys. The grafts were randomly placed into one of four processing groups and implanted into noninfected animals. The presence of SIV antibody was monitored by serologic testing. After the monkeys were killed, the graft sites were studied by histology., Results: All animals receiving fresh allograft or allograft bone that had been subjected to either single or double -70 C freeze-thaw cycles became infected with SIV. Animals receiving allograft that had been subjected to a double freeze-thaw cycle and chemical decontamination were disease-free after 26 weeks when the animals were killed., Conclusions: The results show that SIV (HIV-II) can be transmitted in bone allograft procedures. Although freeze-thaw cycles and lavaging to remove blood elements can reduce the infectivity of a graft, it appears chemical decontamination is necessary to provide a high level of confidence in its safety.

This study evaluated the rotational and bending stability of three interlocking nail systems in paired cadaveric humeri. The Russell-Taylor Humeral Interlocking Nail, the Seidel Humeral Locking Nail, and the True-Flex Humeral Nail were mechanically tested in torsion and four-point bending. The Russell-Taylor and the Seidel interlocking nails are reamed systems that rely on proximal interlocking screws and distal screws or phalanges respectively for rotational stability. However, axillary nerve damage may result during proximal screw placement, and these systems exhibit low resistance to rotation. The True-Flex intramedullary nail is an unreamed system that relies on cross-sectional geometry to achieve rotational stability. By not relying on interlocking screws for stability, nerve damage associated with the screw placement may be eliminated. However, the results indicate the cross-sectional geometry of the True-Flex nail is not able to provide the same degree of static locking as the Russell-Taylor or Seidel interlocking nails. Humeri implanted with the Russell-Taylor and Seidel nails also had a significantly greater torsional stiffness than the True-Flex nail. As expected, humeri implanted with the Russell-Taylor and Seidel nails also had a significantly greater bending stiffness than the True-Flex nail in both anterior-posterior and medial-lateral bending.