Search

Purpose: To investigate the surgical outcomes and intraoperative parameters of 3D visualization system for macular diseases in highly myopic eyes., Methods: In this single-center, prospective, randomized, comparative interventional study, 40 highly myopic eyes (axial length > 26 mm) were randomly assigned to either a 3D visualization system or a conventional microscope group. Surgical outcomes and intraoperative parameters, including the number of indocyanine green injections, surgical time, and epiretinal membrane/internal limiting membrane peeling time, were compared., Results: The 3D group required significantly fewer indocyanine green injections (1.3 ± 0.5 vs. 2.3 ± 0.7, P < 0.001), had shorter epiretinal membrane/internal limiting membrane peeling times (522.8 ± 258.0 vs. 751.8 ± 320.2 seconds, P < 0.05), and experienced fewer intraoperative retinal hemorrhages (0 vs. 7 cases, P < 0.05) compared with the conventional microscope group. Anatomical and functional outcomes were comparable between the two groups., Conclusion: The 3D system exhibited a lower number of indocyanine green injections, shorter epiretinal membrane/internal limiting membrane peeling times, and a reduced incidence of intraoperative retinal hemorrhages, suggesting the 3D visualization system may offer advantages for macular surgery in highly myopic eyes., (Copyright © 2024 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the Opthalmic Communications Society, Inc.)

Objective: The accuracy of automatic tumor segmentation in PET/computed tomography (PET/CT) images is crucial for the effective treatment and monitoring of Hodgkin lymphoma. This study aims to address the challenges faced by certain segmentation algorithms in accurately differentiating lymphoma from normal organ uptakes due to PET image resolution and tumor heterogeneity., Materials and Methods: Variants of the encoder-decoder architectures are state-of-the-art models for image segmentation. Among these kinds of architectures, U-Net is one of the most famous and predominant for medical image segmentation. In this study, we propose a fully automatic approach for Hodgkin lymphoma segmentation that combines U-Net and DenseNet architectures to reduce network loss for very small lesions, which is trained using the Tversky loss function. The hypothesis is that the fusion of these two deep learning models can improve the accuracy and robustness of Hodgkin lymphoma segmentation. A dataset with 141 samples was used to train our proposed network. Also, to test and evaluate the proposed network, we allocated two separate datasets of 20 samples., Results: We achieved 0.759 as the mean Dice similarity coefficient with a median value of 0.767, and interquartile range (0.647-0.837). A good agreement was observed between the ground truth of test images against the predicted volume with precision and recall scores of 0.798 and 0.763, respectively., Conclusion: This study demonstrates that the integration of U-Net and DenseNet architectures, along with the Tversky loss function, can significantly enhance the accuracy of Hodgkin lymphoma segmentation in PET/CT images compared to similar studies., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Rationale and Objectives: This study investigates the performance of tomosynthesis in the presence of osteosynthetic implants, aiming to overcome superimposition-induced limitations in conventional radiograms., Materials and Methods: After surgical fracture induction and subsequent osteosynthesis, 8 cadaveric fracture models (wrist, metacarpus, ankle, metatarsus) were scanned with the prototypical tomosynthesis mode of a multiuse x-ray system. Tomosynthesis protocols at 60, 80, and 116 kV (sweep angle 10°, 13 FPS) were compared with standard radiograms. Five radiologists independently rated diagnostic assessability based on an equidistant 7-point scale focusing on fracture delineation, intra-articular screw placement, and implant positioning. The intraclass correlation coefficient (ICC) was calculated to analyze interrater agreement., Results: Radiation dose in radiography was 0.48 ± 0.26 dGy·cm 2 versus 0.12 ± 0.01, 0.36 ± 0.02, and 1.95 ± 0.11 dGy·cm 2 for tomosynthesis scans at 60, 80, and 116 kV. Delineation of fracture lines was superior for 80/116 kV tomosynthesis compared with radiograms ( P ≤ 0.003). Assessability of intra-articular screw placement was deemed favorable for all tomosynthesis protocols ( P ≤ 0.004), whereas superiority for evaluation of implant positioning could not be ascertained (all P 's ≥ 0.599). Diagnostic confidence was higher for 80/116 kV tomosynthesis versus radiograms and 60 kV tomosynthesis ( P ≤ 0.002). Interrater agreement was good for fracture delineation (ICC, 0.803; 95% confidence interval [CI], 0.598-0.904), intra-articular screw placement (ICC, 0.802; 95% CI, 0.599-0.903), implant positioning (ICC, 0.855; 95% CI, 0.729-0.926), and diagnostic confidence (ICC, 0.842; 95% CI, 0.556-0.934)., Conclusions: In the postoperative workup of extremity fractures, tomosynthesis allows for superior assessment of fracture lines and intra-articular screw positioning with greater diagnostic confidence at radiation doses comparable to conventional radiograms., Competing Interests: Conflicts of interest and sources of funding: J.-P.G. (Z-3BC/02) was financially supported by the Interdisciplinary Center of Clinical Research Würzburg. The radiology department in Würzburg receives ongoing research funding from Siemens Healthineers., (Copyright © 2024 The Author(s). Published by Wolters Kluwer Health, Inc.)

Study Design: Retrospective multicenter study., Objective: To examine the shape change of screw-rod constructs over time after short-segment lumbar interbody fusion and to clarify its relationship to clinical characteristics., Summary of Background Data: No study has focused on the shape change of screw-rod constructs after short-segment fusion and its clinical implications., Methods: One hundred eight patients who had single-level lumbar interbody fusion with pedicle screws and cages were enrolled. Three-dimensional (3D) images of screw-rod constructs were generated from baseline CT on the day after surgery and follow-up CT and were superposed on the right and left side, respectively, using the iterative closest point algorithm. The shape change was quantitatively assessed by computing the median distance between the 3D images, which was defined as the shape change value. Among the 5 time-course categories of follow-up CT (≤1, 2-3, 4-6, 7-12, and ≥13 months), the shape change values were compared. The relationships between the shape change values and clinical characteristics, such as age, CT-derived vertebral bone mineral density, screw and rod materials, and postoperative interbody fusion status, cage subsidence, and screw loosening, were evaluated., Results: A total of 237 follow-up CTs were included (≤1 [34 scans], 2-3 [33 scans], 4-6 [80 scans], 7-12 [48 scans], and ≥13 months [42 scans]) because many patients underwent multiple follow-up CTs. There were significant differences in shape change values among the time-course categories ( P <0.001 in Kruskal-Wallis test). Most shape changes occurred within 6 months postoperatively, with no significant changes observed at 7 months or more. There were no significant relationships between the shape change values and each clinical characteristic., Conclusions: The temporal shape changes of screw-rod constructs following short-segment lumbar interbody fusion progressed up to 6 months after surgery but not significantly thereafter., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Objectives: The aim of this study was to determine whether MRI radiomic features of key cerebral structures differ between women and men, and whether detection of such differences depends on the image resolution., Materials and Methods: Ultrahigh resolution (UHR) 3D MP2RAGE (magnetization-prepared 2 rapid acquisition gradient echo) T1-weighted MR images (voxel size, 0.7 × 0.7 × 0.7 mm 3 ) of the brain of 30 subjects (18 women and 12 men; mean age, 39.0 ± 14.8 years) without abnormal findings on MRI were retrospectively included. MRI was performed on a whole-body 7 T MR system. A convolutional neural network was used to segment the following structures: frontal cortex, frontal white matter, thalamus, putamen, globus pallidus, caudate nucleus, and corpus callosum. Eighty-seven radiomic features were extracted respectively: gray-level histogram (n = 18), co-occurrence matrix (n = 24), run-length matrix (n = 16), size-zone matrix (n = 16), and dependence matrix (n = 13). Feature extraction was performed at UHR and, additionally, also after resampling to 1.4 × 1.4 × 1.4 mm 3 voxel size (standard clinical resolution). Principal components (PCs) of radiomic features were calculated, and independent samples t tests with Cohen d as effect size measure were used to assess differences in PCs between women and men for the different cerebral structures., Results: At UHR, at least a single PC differed significantly between women and men in 6/7 cerebral structures: frontal cortex ( d = -0.79, P = 0.042 and d = -1.01, P = 0.010), frontal white matter ( d = -0.81, P = 0.039), thalamus ( d = 1.43, P < 0.001), globus pallidus ( d = 0.92, P = 0.020), caudate nucleus ( d = -0.83, P = 0.039), and corpus callosum ( d = -0.97, P = 0.039). At standard clinical resolution, only a single PC extracted from the corpus callosum differed between sexes ( d = 1.05, P = 0.009)., Conclusions: Nonnegligible differences in radiomic features of several key structures of the brain exist between women and men, and need to be accounted for. Very high spatial resolution may be required to uncover and further investigate the sexual dimorphism of brain structures on MRI., Competing Interests: Conflicts of interest and sources of funding: M.E.M. received honoraria from GE for lectures. For the remaining authors, no conflicts of interest were declared., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Abstract: Objective: This study aimed to explore the clinical application of three-dimensional arterial spin labeling (3D-ASL) and diffusion-weighted magnetic resonance imaging (DWI) in transient ischemic attacks. Methods: Forty patients with transient cerebral ischemia in our hospital were selected and included from July 2020 to March 2022. All subjects were detected by DWI and 3D-ASL technology. The positive rate, relative cerebral blood flow (rCBF), and the receiver operating characteristic curve of the two methods in the diagnosis of transient cerebral ischemia were compared; the objective was to compare the relationship between the frequency of transient ischemic attack and hypoperfusion, and vascular stenosis. Results: The 3D-ASL examination showed two cases of hypoperfusion in the healthy control group (5.00), and the magnetic resonance imaging examination showed four cases of vascular stenosis in the healthy control group (10.00). The rCBF ratio in the cerebral ischemia group was significantly lower than that in the cerebral ischemia group, which was significantly lower than that in the healthy control group ( P < 0.05). The area under the curve (AUC) of 3D-ASL in the diagnosis of transient cerebral ischemia was 0.800, and the AUC of DWI in the diagnosis of transient cerebral ischemia was 0.725. The AUC of the combination of the two methods in transient cerebral ischemia was 0.850. There was a significant difference in the attack frequency of patients with transient cerebral ischemia with different perfusion ( P < 0.05). There was a significant difference in attack frequency between patients with transient ischemic attack and patients without vascular stenosis ( P < 0.05). Conclusion: 3D-ASL and DWI technology have higher diagnostic efficiency for transient cerebral ischemia., Competing Interests: The author reports no conflicts of interest., (Copyright © 2024 by the Shock Society.)

Background: To investigate the value and clinical effect of computed tomography (CT) 3-dimensional reconstruction technology in lung bullae resection., Methods: Ninety-eight patients who underwent thoracoscopic surgical resection of lung bullae in our hospital from February 2019 to February 2023 were selected and divided into 2 groups according to the principle of voluntary participation in the clinical trial, of which 43 cases underwent preoperative spiral CT for thin-layer enhancement or planar CT scanning of lung bullae (control group), and 43 cases were imaged with MimicsMedical 21 software for 3-dimensional reconstruction to develop a surgical plan (observation group). To compare the surgery-related indexes, postoperative complications, pain, and analgesic use between the 2 groups, we measured serum creatine phosphokinase and myoglobin levels., Results: The amount of surgical bleeding, drainage volume, hospital stay, and postoperative visual analog scale score of the research group were lower than those of the control group (P < .05), and the duration of analgesic medication was shorter than that of the control group (P < .05), and the levels of serum creatine phosphokinase and myoglobin were lower than those of the control group at 1 and 3 days postoperatively, and the differences were statistically significant (P < .05)., Conclusion: Preoperative CT 3-dimensional reconstruction technique can clearly show the anatomical structures around the lung bullae and has its application value for precise lung bullae., Competing Interests: The authors have no funding and conflicts of interest to disclose., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

This study aimed to assess and quantify the morphologic characteristics of the lips and the lower third of the face in cleft and noncleft patients, utilizing three-dimensional (3D) stereophotogrammetry. Sixty patients were included in the study, comprising 30 unilateral cleft lip and palate patients (G1, 24 female, 6 male; aged 20 to 60 y, mean age 44.0±12.0 y) and 30 noncleft patients (G2, 23 female, 7 male; aged 20 to 59 y, mean age 43.5±12.0 y). Anthropometric landmarks were identified on the facial surface. Three-dimensional stereophotogrammetry was employed to capture images. Statistical analysis was conducted to compare the groups, with a significance level set at 0.05. The comparative analysis revealed statistically significant differences in 5 linear and 6 angular measurements. Linear measurements such as philtrum width, upper and lower cutaneous lip height, mandibular ramus length, and midfacial depth exhibited significant differences between cleft and noncleft patients. Similarly, angular measurements, including upper lip angle, Cupid's bow angle, lower/medium face convexity, lip seal, nasolabial angle, and left gonial angle, displayed statistically significant disparities. These findings underscore the ongoing surgical challenges in the comprehensive rehabilitation of patients with clefts, highlighting the critical need for continued advancements in treatment strategies., (Copyright © 2024 by Mutaz B. Habal, MD.)

Objectives: The aim of this study was to qualitatively and quantitatively assess changes in bovine flexor tendons before and after collagen degradation and at different angles in relation to the static B 0 field using 3-dimensional ultra-short echo time (UTE) magnetization transfer (MT) imaging within a clinically feasible acquisition time., Materials and Methods: Eight bovine flexor tendons were examined at 3 T magnetic resonance imaging including 3-dimensional UTE MT and UTE T2* research application sequences (acquired within 4:04 and 6:38 minutes, respectively) before and after enzyme-induced degradation. The tendons were divided into 2 groups: group 1 (controls) treated with phosphate-buffered saline and group 2 treated with collagenase I to induce collagen degeneration. Magnetic resonance imaging was repeated at 0, 27, 55, and 90 degrees to the B 0 field. To calculate quantitative tissue properties, all tendons were semiautomatically segmented, and changes in quantitative UTE T2* and UTE MT ratios (MTRs) were compared at different angles and between groups. In addition to descriptive statistics, the coefficient of variation was calculated to compare UTE MT and UTE T2* imaging., Results: Ultra-short echo time MTR showed a significantly lower coefficient of variation compared with UTE T2* values, indicating a more robust imaging method (UTE MTR 9.64%-11.25%, UTE T2* 18.81%-24.06%, P < 0.001). Both methods showed good performance in detecting degenerated tendons using histopathology as reference standard, with UTE MT imaging having a better area under the curve than UTE T2* mapping (0.918 vs 0.865). Falsely high UTE T2* values were detected at the 55 degrees acquisition angle, whereas UTE MTR values were robust, that is, insensitive to the MAE., Conclusions: Ultra-short echo time MT imaging is a reliable method for quantifying tendon degeneration that is robust to the MAE and can be acquired in a clinically reasonable time., Competing Interests: Conflicts of interest and sources of funding: Balgrist University Hospital has an academic research agreement with Siemens Healthineers., (Copyright © 2024 The Author(s). Published by Wolters Kluwer Health, Inc.)

Objective: The aim of this study was to assess the utility of the combined use of 3D wheel sampling and deep learning-based reconstruction (DLR) for intracranial high-resolution (HR)-time-of-flight (TOF)-magnetic resonance angiography (MRA) at 3 T., Methods: This prospective study enrolled 20 patients who underwent head MRI at 3 T, including TOF-MRA. We used 3D wheel sampling called "fast 3D" and DLR for HR-TOF-MRA (spatial resolution, 0.39 × 0.59 × 0.5 mm 3 ) in addition to conventional MRA (spatial resolution, 0.39 × 0.89 × 1 mm 3 ). We compared contrast and contrast-to-noise ratio between the blood vessels (basilar artery and anterior cerebral artery) and brain parenchyma, full width at half maximum in the P3 segment of the posterior cerebral artery among 3 protocols. Two board-certified radiologists evaluated noise, contrast, sharpness, artifact, and overall image quality of 3 protocols., Results: The contrast and contrast-to-noise ratio of fast 3D-HR-MRA with DLR are comparable or higher than those of conventional MRA and fast 3D-HR-MRA without DLR. The full width at half maximum was significantly lower in fast 3D-MRA with and without DLR than in conventional MRA ( P = 0.006, P < 0.001). In qualitative evaluation, fast 3D-MRA with DLR had significantly higher sharpness and overall image quality than conventional MRA and fast 3D-MRA without DLR (sharpness: P = 0.021, P = 0.001; overall image quality: P = 0.029, P < 0.001)., Conclusions: The combination of 3D wheel sampling and DLR can improve visualization of arteries in intracranial TOF-MRA., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Objectives: The aim of this study was to create and validate a 3-dimensional (3D) ultrasound model with normal and abnormal pediatric hip joint anatomy that is comparable to a pediatric hip joint in appearance and anatomy and replicates sonographic characteristics of a pediatric hip joint., Methods: A 3D rendering of the bone and soft tissue was created from a computed tomography pelvic scan of a pediatric patient. This rendering was modified to include a unilateral joint effusion. The bone was 3D printed with a photopolymer plastic, whereas the soft tissue was cast with a silicone mixture in a 3D-printed mold. The effusion was simulated by injecting saline into the soft tissue cavity surrounding the bone. The ultrasound model was validated by pediatric point-of-care ultrasonographers at an international pediatric ultrasound conference., Results: A pediatric hip ultrasound model was developed that simulates both normal and abnormal pediatric hip joint anatomy, each with an appropriately sized, measurable joint effusion. Validation by pediatric point-of-care ultrasonographers showed that the key aspects of a normal pediatric hip joint (femoral physis, sloped femoral neck, and adequate soft tissue) with an identifiable and measurable effusion were included in the ultrasound model., Conclusions: In this study, we successfully created a cost-effective, reusable, and reproducible 3D pediatric hip ultrasound model. The majority of pediatric point-of-care ultrasonographers who evaluated the model agreed that this model is comparable to a pediatric patient for the purpose of teaching ultrasound skills and joint space measurement., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Pelvic osteotomies are essential to approximate widened symphysis pubis in the exstrophy-epispadias complex, yet it is unknown which osteotomy type has the greatest effect on pelvic volume. We therefore used virtual surgery to study pelvic volume change with anterior, oblique, and posterior iliac osteotomies. Preoperative CT scans of two cloacal and one classic bladder exstrophy patients were used. Simulations were free-hand or constrained to keep minimal strain in the sacrospinous SSL and sacrotuberous STL ligaments. Changes in inter-pubic distance, pelvic volume, SSL and STL strains were measured. Mean pelvic volume decreased by 10% with free hand compared to 23% with constrained simulations ( P  = 0.171) and decreased by 7% with posterior, 17% with diagonal and 26% with horizontal osteotomies ( P  = 0.193). SSL and STL were strained by 20% and 26%, respectively, with free-hand simulations. A statistically significant moderate positive correlation was found between the decrease in inter-pubic distance and reduction in pelvic volume (r = 0.6, P  = 0.004). Mean pelvic volume decreased 0.05, 0.37 and 0.62% for each mm of pubic symphysis approximation with posterior, diagonal and horizontal osteotomies, respectively. Differences in effect on pelvic volume were identified between the osteotomies using virtual surgery which predicted residual diastasis in actual cloacal exstrophy surgical reconstructions. Oblique osteotomies are a compromise, avoiding difficulties with posterior osteotomies and excessive pelvic volume reduction with horizontal osteotomies. Understanding how osteotomy type affects pelvic morphology with virtual surgery may be an effective adjunct to pre-operative planning in exstrophy spectrum., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Computed tomography CT or magnetic resonance imaging (MRI) has been the most used imaging modality to assess hip reduction in developmental dysplasia of the hip (DDH) after open reduction (OR). In 2015, intraoperative 3D fluoroscopy (3D) was introduced at our center as an alternative to CT/MRI. 3D offers the advantage that if hip reduction is insufficient, it can be addressed at the time of surgery. The purpose of this study was to assess the efficacy of 3D in comparison to CT/MRI., Methods: This was a single-centre, retrospective comparative study of two consecutive cohorts: those with OR and 3D between 2015 and 2017 and those with OR and CT/MRI between 2012 and 2014. Time to imaging, re-imaging, length of stay (LOS), re-operation, and redislocation or subluxation after cast removal were evaluated., Results: Forty-two patients (46 hips) had 3D, and 30 patients (32 hips) had CT/MRI. Significant differences were found between groups in time to imaging, cast changes, and LOS. All 3D was intraoperative (46 hips), and only 69% (22 hips) of CT/MRI was on the day of surgery ( P <0.01). In the 3D group, 1 hip (2%) had a cast change under the same anesthetic, and 4 hips (13%) from CT/MRI had cast changes in subsequent surgery ( P =0.03). The mean LOS in days for 3D was 1.72 and 2.20 for CT/MRI ( P =0.03). There were no statistically significant differences between groups in further imaging and subluxations or re-dislocations at cast removal. Two hips (4%) in the 3D group had MRI, but with no further intervention ( P =0.51), and at cast removal, there were 3 subluxations in each group ( P =0.69) and 1 redislocation in the 3D group ( P =1.00)., Conclusions: Intraoperative 3D improved time to imaging, allowed for cast changes at surgery and had a shorter LOS. Moreover, there were no significant differences found in adverse outcomes between those who underwent 3D versus CT/MRI. 3D should thus be considered an effective alternative to CT/MRI for assessing hip reduction during OR for DDH., Level of Evidence: Diagnostic Study, level II., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Objective: To evaluate the morphology of the crista fenestra (CF) using three-dimensional reconstruction based on high-resolution computed tomography (HRCT) and to examine the influence of CF height on the insertion approach used for CI632/532 implants., Study Design: Retrospective study., Setting: Tertiary referral center., Patients: Forty-five ears of 37 patients who received CI632/532 implants were included., Interventions: HRCT images were reconstructed into three-dimensional images, and CF structures were identified. The patients were divided into two group based on the insertion approach: round window approach (RW; n = 27) and extended round window approach (eRW; n = 18). To evaluate CF interference, 10 cases in the eRW group in which the sheath or electrode did not pass through the RW before widening the RW niche (nRW group) were specifically included in the analysis., Main Outcome Measure: The identified CF cross-sections were confirmed by HRCT axial sectioning, and CF heights were measured., Results: The mean CF height was significantly greater in the nRW group than in the RW group (0.97 vs. 0.78 mm)., Conclusion: CF was identified using three-dimensional computer graphics (3DCG) and the CF height on the HRCT axial sections. Thus, measuring the CF height using 3DCG reconstruction can facilitate the preoperative selection of the electrode insertion approach., Competing Interests: Conflicts of Interest: The authors disclose no conflicts of interest., (Copyright © 2024, Otology & Neurotology, Inc.)

Background: The recently described frontal bossing index (FBI) and occipital bullet index (OBI) allow for quantification of scaphocephaly. A similar index examining biparietal narrowing has not been described. Addition of such an index measuring width would allow for direct evaluation of the primary growth restriction in sagittal craniosynostosis and the formation of an optimized global width/length measure., Methods: Computed tomography scans and three-dimensional photographs were used to recreate scalp surface anatomy. Equidistant axial, sagittal, and coronal planes were overlaid, creating a Cartesian grid. Points of intersection were analyzed for population trends in biparietal width. Using the most descriptive point coupled with the sellion protrusion to control for head size, the vertex narrowing index is formed. By combining this index with the FBI and OBI, the scaphocephalic index (SCI) is created as a tailored width/length measure., Results: Using 221 controls and 360 individuals with sagittal craniosynostosis, the greatest difference occurred superiorly and posteriorly at a point 70% of the head's height and 60% of the head's length. This point had an area under the curve of 0.97 and sensitivity and specificity of 91.2% and 92.2%, respectively. The SCI has an area under the curve of 0.9997, sensitivity and specificity greater than 99%, and interrater reliability of 0.995. The correlation coefficient between computed tomography imaging and three-dimensional photography was 0.96., Conclusions: The vertex narrowing index, FBI, and OBI evaluate regional severity, while the SCI is able to describe global morphology in patients with sagittal craniosynostosis. These measures allow for superior diagnosis, surgical planning, and outcome assessment, independent of radiation., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Liver cancer with portal vein tumor thrombus (PVTT) is a frequent finding and is related to poor prognosis. Surgical resection provides a more promising prognosis in selected patients. The purpose of this study was to explore the application of 3D (3-dimensional) visualization and image fusion technology in liver cancer with PVTT surgery. 12 patients were treated with surgery between March 2019 and August 2022. The preoperative standard liver volume (SLV), estimated future liver remnant (FLR), FLR/SLV, 3D visualization models, PVTT classification, operation programs, surgical results, and prognosis were collected and analyzed. Twelve patients who had complete data of 3D visualization and underwent hemihepatectomy combined with portal vein tumor thrombectomy. The operation plan was formulated by 3D visualization and was highly consistent with the actual surgery. The SLV was 1208.33 ± 63.22 mL, FLR was 734.00 mL and FLR/SLV was 61.62 ± 19.38%. The accuracy of classification of PVTT by 3D visualization was 100%, Cheng type Ⅱa (4 cases), Ⅱb (2 cases), Ⅲa (4 cases), and Ⅲb (2 cases). The 3D visualization model was a perfect fusion with the intraoperative live scene and precise guidance for hepatectomy. No patient was suffering from postoperative liver failure and without procedure‑associated death. 6 patients died of tumor recurrence, and 2 patients died of other reasons. The 12-month cumulative survival rate was 25.9%. 3D visualization and image fusion technology could be used for precise assessment of FLR, classification of PVTT, surgery navigation, and which was helpful in improving the safety of hepatectomy., Competing Interests: The authors have no funding and conflicts of interest to disclose., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

Background: Analysis of vascular networks is an essential step to unravel the mechanisms regulating the physiological and pathological organization of blood vessels. So far, most of the analyses are performed using 2-dimensional projections of 3-dimensional (3D) networks, a strategy that has several obvious shortcomings. For instance, it does not capture the true geometry of the vasculature and generates artifacts on vessel connectivity. These limitations are accepted in the field because manual analysis of 3D vascular networks is a laborious and complex process that is often prohibitive for large volumes., Methods: To overcome these issues, we developed 3DVascNet, a deep learning-based software for automated segmentation and quantification of 3D retinal vascular networks. 3DVascNet performs segmentation based on a deep learning model, and it quantifies vascular morphometric parameters such as vessel density, branch length, vessel radius, and branching point density. We tested the performance of 3DVascNet using a large data set of 3D microscopy images of mouse retinal blood vessels., Results: We demonstrated that 3DVascNet efficiently segments vascular networks in 3D and that vascular morphometric parameters capture phenotypes detected by using manual segmentation and quantification in 2 dimension. In addition, we showed that, despite being trained on retinal images, 3DVascNet has high generalization capability and successfully segments images originating from other data sets and organs., Conclusions: Overall, we present 3DVascNet, a freely available software that includes a user-friendly graphical interface for researchers with no programming experience, which will greatly facilitate the ability to study vascular networks in 3D in health and disease. Moreover, the source code of 3DVascNet is publicly available, thus it can be easily extended for the analysis of other 3D vascular networks by other users., Competing Interests: Disclosures None.

Background: While radial bow shape is well characterized in adults, its development in children is not well understood. Previous studies on the radial bow use radiographs, thus, rotational positioning of the forearm could alter bowing measurements. This study used 3D imaging to better assess the pediatric radial bow., Methods: Computed tomography scans from the New Mexico Decedent Image Database were obtained for ages 2 to 16 (females) and 18 (males) (n=152). 3D models were generated using Slicer and Rhino software. Length of the entire radial bow (bicipital tuberosity to sigmoid notch), maximum radial bow, location of the maximum radial bow (bicipital tuberosity to the point of maximum bowing), and distal, middle, and proximal third radial bows were measured., Results: The length of the entire bow increased with age, with a strong correlation with age ( r =0.90, P <0.01). The maximum bow increased with age, with a strong correlation with age ( r =0.78, P <0.01). The maximum bow normalized to the length of the entire bow increased mildly with age, mean 0.059 ± 0.012 ( r =0.24, P =0.0024), but seems to plateau around age 8. The location of the maximum bow increased with age ( r =0.85, P <0.01). The normalized location of the maximum bow remained constant between ages, with a mean of 0.41 ± 0.10 ( r =0.12, P =0.14). The normalized distal third bow mildly increased with age ( r =0.34, P <0.01), the normalized middle third bow mildly increased with age ( r =0.25, P <0.01), and the normalized proximal third bow remained constant between ages ( r =0.096, P =0.24)., Conclusions: Normalized values for maximum, distal third, and middle third radial bow increase with age, while normalized values for location and proximal third radial bow remain relatively constant, suggesting the proportional shape of the radius changes during development, although qualitatively plateaus after age 8., Level of Evidence: Retrospective comparative study, Level-III., Competing Interests: R.W.L. receives royalties paid to his university from Orthopediatrics, and a stipend from the Journal of Pediatric Orthopaedics as a deputy editor. J.M.A. is a paid consultant for Axogen and receives publishing royalties/financial support from Elsevier and Springer. The remaining authors declare no conflicts of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Objectives: Optical fluorescence imaging can track the biodistribution of fluorophore-labeled drugs, nanoparticles, and antibodies longitudinally. In hybrid computed tomography-fluorescence tomography (CT-FLT), CT provides the anatomical information to generate scattering and absorption maps supporting a 3-dimensional reconstruction from the raw optical data. However, given the CT's limited soft tissue contrast, fluorescence reconstruction and quantification can be inaccurate and not sufficiently detailed. Magnetic resonance imaging (MRI) can overcome these limitations and extend the options for tissue characterization. Thus, we aimed to establish a hybrid CT-MRI-FLT approach for whole-body imaging and compared it with CT-FLT., Materials and Methods: The MRI-based hybrid imaging approaches were established first by scanning a water and coconut oil-filled phantom, second by quantifying Cy7 concentrations of inserts in dead mice, and finally by analyzing the biodistribution of AF750-labeled immunoglobulins (IgG, IgA) in living SKH1 mice. Magnetic resonance imaging, acquired with a fat-water-separated mDixon sequence, CT, and FLT were co-registered using markers in the mouse holder frame filled with white petrolatum, which was solid, stable, and visible in both modalities., Results: Computed tomography-MRI fusion was confirmed by comparing the segmentation agreement using Dice scores. Phantom segmentations showed good agreement, after correction for gradient linearity distortion and chemical shift. Organ segmentations in dead and living mice revealed adequate agreement for fusion. Marking the mouse holder frame and the successful CT-MRI fusion enabled MRI-FLT as well as CT-MRI-FLT reconstructions. Fluorescence tomography reconstructions supported by CT, MRI, or CT-MRI were comparable in dead mice with 60 pmol fluorescence inserts at different locations. Although standard CT-FLT reconstruction only considered general values for soft tissue, skin, lung, fat, and bone scattering, MRI's more versatile soft tissue contrast enabled the additional consideration of liver, kidneys, and brain. However, this did not change FLT reconstructions and quantifications significantly, whereas for extending scattering maps, it was important to accurately segment the organs and the entire mouse body. The various FLT reconstructions also provided comparable results for the in vivo biodistribution analyses with fluorescent immunoglobulins. However, MRI additionally enabled the visualization of gallbladder, thyroid, and brain. Furthermore, segmentations of liver, spleen, and kidney were more reliable due to better-defined contours than in CT. Therefore, the improved segmentations enabled better assignment of fluorescence signals and more differentiated conclusions with MRI-FLT., Conclusions: Whole-body CT-MRI-FLT was implemented as a novel trimodal imaging approach, which allowed to more accurately assign fluorescence signals, thereby significantly improving pharmacokinetic analyses., Competing Interests: Conflicts of interest and sources of funding: F.G. is the owner of Gremse-IT. S.R. is employed at Gremse-IT. This work was funded by the Deutsche Forschungsgemeinschaft (German Research Foundation), project ID 403224013 (SFB 1382 Gut-Liver Axis)., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Purpose: To evaluate a system for otomicrosurgery based on 4K three-dimensional (3D) exoscope technology and apply it to cochlear implantation., Methods: An open stereoscopic vision-based surgical system, which differs from traditional surgical microscopes, was created by utilizing 4K stereo imaging technology and combining it with low-latency 4K ultra-high-definition 3D display. The system underwent evaluation based on 57 cochlear implantation operations, three designed microscopic manipulations, and a questionnaire survey., Results: The surgical images displayed by the 4K-3D exoscope system (4K-3D-ES) are stereoscopic, clear, and smooth. The use of 4K-3D-ES in cochlear implantation is not inferior to traditional microscopes in terms of intraoperative bleeding and surgical complications, and the surgical duration is not slower or may even be faster than when using traditional microscopes. The results of micromanipulation experiments conducted on 16 students also confirmed this and demonstrated that 4K-3D-ES can be easily adapted. Furthermore, additional advantages of 4K-3D-ES were gathered. Significantly enlarged and high-definition stereoscopic images contribute to the visualization of finer anatomical microstructures such as chordae tympani, ensuring safer surgery. Users feel more comfortable in their necks, shoulders, waists, and backs. Real-time shared stereoscopic view for multiple people, convenient for collaboration and teaching. The ear endoscope and 4K-3D-ES enable seamless switching on the same screen. High-definition 3D images and videos can be saved with just one click, making future publication and communication convenient., Conclusion: The feasibility and safety of 4K-3D-ES for cochlear implantation surgery have been demonstrated. The 4K-3D-ES also offers numerous unique advantages and holds clinical application and promotional value., Competing Interests: The authors disclose no conflicts of interest., (Copyright © 2024, Otology & Neurotology, Inc.)

Objective: Orthognathic surgery is a viable and reproducible treatment for facial deformities. Despite the precision of the skeletal planning of surgical procedures, there is little information about the relations between hard and soft tissues in three-dimensional (3D) analysis, resulting in unpredictable soft tissue outcomes. Three-dimensional photography is a viable tool for soft tissue analysis because it is easy to use, has wide availability, low cost, and is harmless. This review aims to establish parameters for acquiring consistent and reproducible 3D facial images., Methods: A scoping review was conducted across PubMed, SCOPUS, Scientific Electronic Library Online (SciELO), and Web of Science databases, adhering to "Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews" guidelines. Articles presenting 3D facial photographs in the diagnostic phase were considered., Results: A total of 79 articles were identified, of which 29 were selected for analysis., Conclusion: The predominant use of automated systems like 3dMD and VECTRA M3 was noted. User positioning has highest agreement among authors. Noteworthy aspects include the importance of proper lighting, facial expression, and dental positioning, with observed discrepancies and inconsistencies among authors. Finally, the authors proposed a 3D image acquisition protocol based on this research findings., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

The current use of intracorporeal left ventricular assist devices in children is still limited by small body dimensions. Many children weighing of less than 30 kg requiring durable mechanical circulatory support are implanted with the Berlin Heart EXCOR, a paracorporeal device. We present the case of a girl aged 10 years with a body surface area of 1.01 m 2 undergoing a safe and effective HeartMate3 implantation despite extremely small thoracic dimensions. Using computed tomography-derived three-dimensional (3D) reconstruction, it was possible to simulate several device positions finding the best HeartMate3 lodging. Simulation-guided pump placement was then obtained in the operating room. Normal HeartMate3 functioning was registered until heart transplant. Our experience shows that preoperative planning and virtual fitting simulation can be effective to assess safety of HeartMate3 implantation even in small children. The 3D reconstruction and simulation may help to increase the pool of children candidates for this device, even though a larger experience is needed to assess the risk profile of the HeartMate3 in such small patients., Competing Interests: Disclosure: The authors have no conflicts of interest to report., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the ASAIO.)

This study investigated the anatomic features of the zygomatic-maxillary complex in patients with maxillary retrusion without clefts. Individuals were grouped, and craniofacial measurements were performed for 21 individuals with skeletal Class III malocclusion with maxillary retrusion (CIII) and 48 individuals from the control group (CG). We evaluated the predetermined hard-tissue and soft-tissue points of the facial profile in each group. Independent sample t -tests were performed to determine the differences between groups (significance set at P <0.05). Multiple points on the midface, including the most posterior point on the contour of the maxillary alveolar process, lowest point of the zygomaticomaxillary suture, furthest point to the zygomatic self-base plane, superior point in the infraorbital foramen, and lowest point of the inferior margin of the orbit to the coronal plane were smaller in CIII than in CG (all P <0.05). The soft tissue thickness in these regions was significantly increased compared with that in the normal group. In summary, for class III malocclusion patients with maxillary retrusion, the deficiency in the midface gradually decreased going upward, with the deficiency at the maxillary alveolar level being the most serious. To some extent, soft tissues compensate for the deficiencies in the facial skeleton, and standard Le Fort I osteotomy advancement was sufficient to achieve a harmonious appearance., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

Objectives: The aim of this study was to assess the diagnostic value of 3-dimensional dual-echo steady-state (DESS) magnetic resonance imaging (MRI) of the cervical spine at 7 T compared with 3 T in patients with cervical radiculopathy., Materials and Methods: Patients diagnosed with cervical radiculopathy were prospectively recruited between March 2020 and January 2023 before undergoing surgical decompression and received 3-dimensional DESS imaging at 3 T and 7 T MRI. Cervical nerve root compression and the dimensions of the dorsal root ganglia were assessed by 2 radiologists independently. Signal intensity, visibility of nerve anatomy, diagnostic confidence, and image artifacts were evaluated with Likert scales. The degree of neuroforaminal stenosis was assessed on standard clinical 3 T scans. Statistics included the analysis of the diagnostic accuracy and interreader reliability. The Wilcoxon signed rank test was used to assess differences between the groups., Results: Forty-eight patients (mean age, 57 ± 12 years; 22 women) were included in the study with the highest prevalence of severe neuroforaminal stenosis observed at C6 (n = 68) followed by C7 (n = 43). Direct evaluation of nerve root compression showed significantly higher diagnostic confidence and visibility of cervical nerve rootlets, roots, and dorsal root ganglia on 7 T DESS than on 3 T DESS (diagnostic confidence: P = 0.01, visibility: P < 0.01). Assessment of nerve root compression using 7 T DESS allowed more sensitive grading than standard clinical MRI ( P < 0.01) and improved the performance in predicting sensory or motor dysfunction (area under the curve combined: 0.87)., Conclusions: 7 T DESS imaging allows direct assessment of cervical nerve root compression in patients with radiculopathy, with a better prediction of sensory or motor dysfunction than standard clinical MRI. Diagnostic confidence and image quality of 7 T DESS were superior to 3 T DESS., Competing Interests: Conflicts of interest and sources of funding: none declared., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Objective: This study aimed to address the gap in knowledge assessing the impact of visceral and subcutaneous body fat on 3-dimensional computed tomography imaging in patients with greater trochanteric pain syndrome (GTPS) in comparison with those primarily diagnosed with osteoarthritis (OA)., Materials and Methods: We evaluated adult patients with a confirmed diagnosis of GTPS from our institutional hip-preservation clinic spanning 2011 to 2022. Selection criteria included their initial clinic visit for hip pain and a concurrent pelvis computed tomography scan. These patients were age- and sex-matched to mild-moderate OA patients selected randomly from the database. Visceral and subcutaneous fat areas were measured volumetrically from the sacroiliac joint to the lesser trochanter using an independent software. Interreader reliability was also calculated., Results: A total of 93 patients met the study criteria, of which 37 belonged to the GTPS group and 56 belonged to the OA group. Both groups were sex and race matched. Average age in GTPS and OA groups was 59.3 years and 56 years, respectively. For GTPS group, average body mass index was 28.9 kg/m 2 , and for the OA group, average body mass index was 29.9 kg/m 2 , with no significant difference ( P > 0.05). Two-sample t test showed no significant differences in the visceral fat, subcutaneous fat, or the visceral fat to total fat volume ratio between the GTPS and OA groups. There was excellent interreader reliability., Conclusions: Our results indicate that there is no significant difference in fat distribution and volumes among GTPS and OA patients. This suggests that being overweight or obese may not be directly linked or contribute to the onset of GTPS. Other factors, such as gluteal tendinopathy, bursitis, or iliotibial band syndrome, might be responsible and need further investigation., Competing Interests: The authors declare no conflict of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: Accurate quantification of liver iron concentration (LIC) can be achieved via magnetic resonance imaging (MRI). Maps of liver T2*/R2* are provided by commercially available, vendor-provided, 3-dimensional (3D) multiecho Dixon sequences and allow automated, inline postprocessing, which removes the need for manual curve fitting associated with conventional 2-dimensional (2D) gradient echo (GRE)-based postprocessing. The main goal of our study was to investigate the relationship among LIC estimates generated by 3D multiecho Dixon sequence to values generated by 2D GRE-based R2* relaxometry as the reference standard., Methods: A retrospective review of patients who had undergone MRI scans for estimation of LIC with conventional T2* relaxometry and 3D multiecho Dixon sequences was performed. A 1.5 T scanner was used to acquire the magnetic resonance studies. Acquisition of standard multislice multiecho T2*-based sequences was performed, and R2* values with corresponding LIC were estimated. The comparison between R2* and corresponding LIC estimates obtained by the 2 methods was analyzed via the correlation coefficients and Bland-Altman difference plots., Results: This study included 104 patients (51 male and 53 female patients) with 158 MRI scans. The mean age of the patients at the time of scan was 15.2 (SD, 8.8) years. There was a very strong correlation between the 2 LIC estimation methods for LIC values up to 3.2 mg/g (LIC quantitative multiecho Dixon [qDixon; from region of interest R2*] vs LIC GRE [in-house]: r = 0.83, P < 0.01; LIC qDixon [from segmentation volume R2*] vs LIC GRE [in-house]: r = 0.92, P < 0.01); and very weak correlation between the 2 methods at liver iron levels >7 mg/g., Conclusion: Three-dimensional-based multiecho Dixon technique can accurately measure LIC up to 7 mg/g and has the potential to replace 2D GRE-based relaxometry methods., Competing Interests: The authors declare no conflict of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

Objective: The preoperative prediction of the overall survival (OS) status of patients with head and neck cancer (HNC) is significant value for their individualized treatment and prognosis. This study aims to evaluate the impact of adding 3D deep learning features to radiomics models for predicting 5-year OS status., Methods: Two hundred twenty cases from The Cancer Imaging Archive public dataset were included in this study; 2212 radiomics features and 304 deep features were extracted from each case. The features were selected by univariate analysis and the least absolute shrinkage and selection operator, and then grouped into a radiomics model containing Positron Emission Tomography /Computed Tomography (PET/CT) radiomics features score, a deep model containing deep features score, and a combined model containing PET/CT radiomics features score +3D deep features score. TumorStage model was also constructed using initial patient tumor node metastasis stage to compare the performance of the combined model. A nomogram was constructed to analyze the influence of deep features on the performance of the model. The 10-fold cross-validation of the average area under the receiver operating characteristic curve and calibration curve were used to evaluate performance, and Shapley Additive exPlanations (SHAP) was developed for interpretation., Results: The TumorStage model, radiomics model, deep model, and the combined model achieved areas under the receiver operating characteristic curve of 0.604, 0.851, 0.840, and 0.895 on the train set and 0.571, 0.849, 0.832, and 0.900 on the test set. The combined model showed better performance of predicting the 5-year OS status of HNC patients than the radiomics model and deep model. The combined model was shown to provide a favorable fit in calibration curves and be clinically useful in decision curve analysis. SHAP summary plot and SHAP The SHAP summary plot and SHAP force plot visually interpreted the influence of deep features and radiomics features on the model results., Conclusions: In predicting 5-year OS status in patients with HNC, 3D deep features could provide richer features for combined model, which showed outperformance compared with the radiomics model and deep model., Competing Interests: Conflicts of Interest and Source of Funding: This work was supported by Hebei Province Introduced Returned Overseas Chinese Scholars Funding Project(C20220107), Hebei Natural Science Foundation (C2022406010) and Hebei Higher Education Association “14th Five-Year Plan” Project (GJXH2021-126), Funded by Science and Technology Project of Hebei Education Department (BJK2023060), Chengde Medical university project (202307, KY202404)., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)

This study aimed to investigate the value of placental real-time shear wave elastography combined with three-dimensional power Doppler index (3D-PDI) in the prediction of preeclampsia. We conducted a retrospective study selecting 60 pregnant women diagnosed with preeclampsia as the experimental group and 60 normal pregnant women as the control group from January 2021 to December 2022. The elastic modulus values of different regions of the placenta and placental 3D-PDI were detected and compared between the two groups. The ROC curve was used to evaluate the diagnostic value of each parameter, alone or in combination, for preeclampsia. The study findings demonstrated that the elastic modulus values of different regions of the placenta and 3D-PDI of the two groups have statistical significance. The values of SWE, VI, FI, and VFI are different in prediction of preeclampsia, and the combination of various parameters can improve the prediction value. Overall, our study provides a valuable method for the prediction of preeclampsia with the advantages of non-invasiveness, efficiency, and simplicity., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

Purpose of Review: Percutaneous nephrolithotripsy (PCNL) is the first-line management option for large kidney stones (>2 cm). It remains, however, a demanding procedure with considerable morbidity. The present narrative review summarizes recent knowledge from original research studies investigating navigation systems/three-dimensional (3D) imaging in PCNL, particularly on publications during the past 12-18 months., Recent Findings: Navigation systems and 3D imaging are primarily used for preoperative planning, with few intra-operative applications. Patient management and residents' training could benefit from their use., Summary: Navigation systems and 3D imaging technology have emerged as a potential game-changer in PCNL. Even though available evidence is currently scarce/inconclusive, the safety/efficacy of navigation systems and 3D dimensional imaging use in PCNL appears promising. This advanced technology offers precise anatomical mapping, improved visualization, and surgical accuracy. Enabling a comprehensive preoperative evaluation and improving guidance, navigation systems, and 3D imaging technology may improve the safety and efficacy of PCNL. With continuous technological evolution, it is expected that improvements/innovations will offer further aid in such demanding procedures. Familiarization and cost reduction are necessary for widespread application, while larger-scale prospective studies and well designed randomized controlled trials are still needed., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Objective assessment of craniofacial surgery outcomes in a pediatric population is challenging because of the complexity of patient presentations, diversity of procedures performed, and rapid craniofacial growth. There is a paucity of robust methods to quantify anatomical measurements by age and objectively compare craniofacial dysmorphology and postoperative outcomes. Here, the authors present data in developing a racially and ethnically sensitive anthropomorphic database, providing plastic and craniofacial surgeons with "normal" three-dimensional anatomical parameters with which to appraise and optimize aesthetic and reconstructive outcomes., Methods: Patients with normal craniofacial anatomy undergoing head magnetic resonance imaging (MRI) scans from 2008 to 2021 were included in this retrospective study. Images were used to construct composite (template) images with diffeomorphic image registration method using the Advanced Normalization Tools package. Composites were thresholded to generate binary three-dimensional segmentations used for anatomical measurements in Materalise Mimics., Results: High-resolution MRI scans from 130 patients generated 12 composites from an average of 10 MRI sequences each: four 3-year-olds, four 4-year-olds, and four 5-year-olds (two male, two female, two Black, and two White). The average head circumference of 3-, 4-, and 5-year-old composites was 50.3, 51.5, and 51.7 cm, respectively, comparable to normative data published by the World Health Organization., Conclusions: Application of diffeomorphic registration-based image template algorithm to MRI is effective in creating composite templates to represent "normal" three-dimensional craniofacial and soft-tissue anatomy. Future research will focus on development of automated computational tools to characterize anatomical normality, generation of indices to grade preoperative severity, and quantification of postoperative results to reduce subjectivity bias., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Background: Functional magnetic resonance urography (MRU) is well established in the diagnostic workup of urinary tract anomalies in children, providing comprehensive morphological and functional information. However, dynamic contrast-enhanced images acquired in the standard Cartesian k-space manner are prone to motion artifacts. A newly introduced 4D high spatiotemporal resolution dynamic contrast-enhanced magnetic resonance imaging based on variable density elliptical centric radial stack-of-stars sharing technique has shown improved image quality regarding motions under free breathing., Objective: The aims of this study were to implement this 4D free-breathing sequence for functional MRU and to compare its image quality and analyzability with standard breath-hold Cartesian MRU., Materials and Methods: We retrospectively evaluated all functional 4D MRU performed without general anesthesia between September 2021 and December 2022 and compared them with matched pairs (age, affected kidney, diagnosis) of standard Cartesian MRU between 2016 and 2022. Image analysis was performed by 2 radiologists independently regarding the following criteria using a 4-point Likert scale, with 4 being the best: overall image quality, diagnostic confidence, respiratory motion artifacts, as well as sharpness and contrast of aorta, kidneys, and ureters. We also measured vertical kidney motion due to respiratory motion and compared the variance for each kidney using F test. Finally, both radiologists calculated the volume, split renal volume (vDRF), split renal Patlak function (pDRF), and split renal function considering the volume and Patlak function (vpDRF) for each kidney. Values were compared using Bland-Altman plots and F test., Results: Forty children (20 for 4D free-breathing and standard breath-hold, respectively) were enrolled. Ten children of each group were examined using feed-and-sleep technique (median age: 4D, 3.3 months; standard, 4.2 months), 10 were awake (median age: 4D, 8.9 years; standard, 8.6 years). Overall image quality, diagnostic confidence, respiratory motion artifacts, as well as sharpness and contrast of the aorta, kidneys, and ureters were rated significantly better for 4D free-breathing compared with standard breath-hold by both readers ( P ranging from <0.0001 to 0.005). Vertical kidney motion was significantly reduced in 4D free-breathing for the right and the left kidney (both P < 0.001). There was a significantly smaller variance concerning the differences between the 2 readers for vpDRF in 4D MRU ( P = 0.0003). In contrast, no significant difference could be demonstrated for volume ( P = 0.05), vDRF ( P = 0.93), and pDRF ( P = 0.14)., Conclusions: We demonstrated the feasibility of applying a 4D free-breathing variable density stack-of-stars imaging for functional MRU in young pediatric patients with improved image quality, fewer motion artifacts, and improved functional analyzability., Competing Interests: Conflicts of interest and sources of funding: none declared., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Virtual planning has revolutionized orthognathic surgery. This study presents a computer-assisted method for constructing average three-dimensional skeletofacial models that can be applied as templates for surgical planning for maxillomandibular repositioning., Methods: The authors used the images of 60 individuals (30 women and 30 men) who had never undergone orthognathic surgery to construct an average three-dimensional skeletofacial model for male participants and one for female participants. The authors validated the accuracy of the newly developed skeletofacial models by comparing their images with 30 surgical simulation images (ie, skulls) that had been created using three-dimensional cephalometric normative data. The comparison was conducted by superimposing surgical simulation images created using the authors' models with the previously created images to analyze their differences, particularly differences in the jawbone position., Results: For all participants, the authors compared the jaw position in the surgical simulation images created using the authors' average three-dimensional skeletofacial models with that in the images created using three-dimensional cephalometric normative data. The results revealed that the planned maxillary and mandibular positions were similar in both images and that the differences between all facial landmarks were less than 1 mm, except for one dental position. Most studies have reported less than 2 mm to be the success criterion for the distance difference between planned and outcome images; thus, the authors' data indicate high consistency between the images in terms of jawbone position., Conclusion: The authors' average three-dimensional skeletofacial models provide an innovative template-assisted orthognathic surgery planning modality that can enhance the fully digital workflow for virtual orthognathic surgical planning., Clinical Question/level of Evidence: Therapeutic, V., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Objectives: To compare the fast 3-dimensional NerveVIEW (3D NerveVIEW) with diffusion-weighted imaging with background suppression (DWIBS) in imaging of lumbosacral plexus and its branches., Methods: A prospective study was performed on 30 healthy volunteers and patients who had undergone compressed sensing 3D NerveVIEW and DWIBS scans. There were 11 healthy subjects, 15 patients with lumbar disc herniation, and 4 patients with chronic inflammatory demyelinating polyradiculoneuropathy. Image quality was rated using a 4-point subjective scale. Quantitative evaluation of the nerves was done by measuring signal-to-noise ratio, contrast-to-noise ratio, and signal-to-background ratio, and the consistency in the measurements of nerve root cross-sectional areas was also assessed. The differences of signal-to-noise ratio, contrast-to-noise ratio, signal-to-background ratio, and the scores of image quality between 2 sequences were compared., Results: The overall average image quality score of 3D NerveVIEW was significantly higher than that of DWIBS (2.72 ± 0.45 and 2.45 ± 0.81, respectively; P < 0.01). In terms of individual nerves, there was no significant difference between the 2 sequences in the display of the nerves from L2 to S1; however, 3D NerveVIEW was significantly better than DWIBS in demonstration of the S2-S3 nerves, as well as the nerve details. Regarding quantitative measurements, these sequences achieved comparable results with excellent interobserver agreements., Conclusion: Fast 3D NerveVIEW was superior to DWIBS with improved conspicuity of small distal nerves of S2-S3 and nerve details., Competing Interests: The authors declare no conflict of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Few studies have examined whether preoperative three-dimensional surface imaging can accurately predict breast volume. Reliably predicting breast volume preoperatively can assist with breast reconstruction planning, patient education, and perioperative risk stratification., Methods: The authors conducted a review of patients who underwent mastectomy from 2020 to 2021 and included all patients who had preoperative VECTRA XT three-dimensional imaging. VECTRA Analysis Module (VAM) and VECTRA Body Sculptor (VBS) were used for volumetric analysis using standard anatomical breast borders. Breast weights were obtained intraoperatively. Predictive accuracy was defined as VAM estimates ±10% of mastectomy specimen weight or ±100 g of mastectomy weight., Results: The study included 179 patients (266 breasts). There was no significant difference ( P = 0.22) between mean mastectomy weight of 620.8 ± 360.3 g and mean VAM estimate of 609.5 ± 361.9 g. Mean VBS estimate was 498.9 ± 337.6 g, which differed from mean mastectomy weight ( P < 0.001). When defining predictive accuracy as ±100 g, 58.7% of VAM and 44.4% of VBS estimates were accurate. Body mass index, body surface area, and ptosis grade significantly affected VAM and VBS breast volume predictions., Conclusions: VAM is more accurate at predicting mastectomy weight than VBS, likely because of VAM's analysis of surface topography rather than discrete surface landmarks. Discrepancies between VECTRA estimates and mastectomy weight were likely attributable to differences between surgical mastectomy borders and breast borders used in volumetric analysis. Surgeons should consider the physical characteristics of patients when using three-dimensional imaging., Clinical Question/level of Evidence: Diagnostic, I., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Study Design: A prospective cohort study., Objective: Detail typical three-dimensional segmental deformities and their rates of change that occur within developing adolescent idiopathic scoliosis (AIS) spines over multiple timepoints., Summary of Background Data: AIS is a potentially progressive deforming condition that occurs in three dimensions of the scoliotic spine during periods of growth. However, there remains a gap for multiple timepoint segmental deformity analysis in AIS cohorts during development., Materials and Methods: Thirty-six female patients with Lenke 1 AIS curves underwent two to six sequential magnetic resonance images. Scans were reformatted to produce images in orthogonal dimensions. Wedging angles and rotatory values were measured for segmental elements within the major curve. Two-tailed, paired t tests compared morphologic differences between sequential scans. Rates of change were calculated for variables given the actual time between successive scans. Pearson correlation coefficients were determined for multidimensional deformity measurements., Results: Vertebral bodies were typically coronally convexly wedged, locally lordotic, convexly axially rotated, and demonstrated evidence of local mechanical torsion. Between the first and final scans, apical measures of coronal wedging and axial rotation were all greater in both vertebral and intervertebral disk morphology than nonapical regions (all reaching differences where P <0.05). No measures of sagittal deformity demonstrated a statistically significant change between scans. Cross-planar correlations were predominantly apparent between coronal and axial planes, with sagittal plane parameters rarely correlating across dimensions. Rates of segmental deformity changes between earlier scans were characterized by coronal plane convex wedging and convexly directed axial rotation. The major locally lordotic deformity changes that did occur in the sagittal plane were static between scans., Conclusions: This novel investigation documented a three-dimensional characterization of segmental elements of the growing AIS spine and reported these changes across multiple timepoints. Segmental elements are typically deformed from initial presentation, and subsequent changes occur in separate orthogonal planes at unique times., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Summary: Laser imaging detection and ranging (LiDAR) is a modern three-dimensional (3D) technology that uses a time-of-flight method based on the round-trip time of an infrared laser beam to detect the presence and features of objects. The iPhone 12 Pro is the first smart mobile device with built-in LiDAR sensors. The authors' team developed a software application based on iOS devices with built-in LiDAR sensors for 3D breast scanning and automatically analyzing the breast's geometric measurement. Breast geometry, including midclavicle-to-nipple distance, sternal notch-to-nipple distance, nipple-to-inframammary fold (IMF) distance, distance between nipples, and body circumference on nipple and IMF level were measured using the software application and tapeline. The relative technical error of measurement (rTEM) value was used to calculate the error ratios between the measurements acquired by the software application and those of the tapeline. Good rTEM values ranging from 2.99% to 5.19% were found in the midclavicle-to-nipple distance, sternal notch-to-nipple distance, distance between nipples, nipple-level circumference, and IMF-level circumference. However, there was a poor rTEM value greater than 10% in the nipple-to-IMF distance. The proposed software application using current iOS devices with built-in LiDAR sensors can provide an ideal 3D scanning system that has a low cost burden, good accuracy, portability, and ease of use., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Objective: The study was performed to analyze the oropharynx airway and examine the influence of age and gender on the oropharynx volume configuration using cone beam computed tomography., Materials and Methods: This study examined the cone beam computed tomographic images of 51 patients 25 male and 26 females, group matched for age and gender. The oropharynx airway volume and area between the posterior nasal spine and top of the epiglottis were measured and compared., Results: The statistical measurements of 51 cone beam computed tomography images showed a nonsignificant difference found between male and female regarding the age (the mean age for female 40.15 y. and for male32.72 y). Male subjects had greater oropharynx volume, a high significant difference ( P =0.005) in oropharynx volume between the 3 age groups. A significant difference was found between the smallest age group with the larger age groups., Conclusion: The study data revealed that the changes in measurements of oropharynx airway are age-dependent in addition to gender effect., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

Objectives: The objective of this study was to evaluate unplanned cortical or neuroforaminal violation of iliosacral and transsacral screw placement using fluoroscopy versus screw placement using a robotic arm., Design: This is a prospective cohort study., Setting: Single surgeon, single North American level 1 trauma center., Patients: Radiographic and clinical data for 21 consecutive adult trauma patients with pelvic ring fractures undergoing surgical treatment were prospectively collected. Treatment consisted of iliosacral and/or transsacral screws with or without anterior fixation., Intervention: Ten patients were treated with the assistance of a robotic arm. Eleven patients were treated with standard fluoroscopic techniques., Main Outcome Measurements: Thirty-two screws were placed and evaluated with postoperative computed tomography or O-arm spins to assess unplanned cortical or neuroforaminal violation. Violations were graded according to the Gertzbein and Robbins system for pedicle screw violation, categorizing screw violation in 2-mm increments. The postoperative images were blindly reviewed by 5 fellowship-trained orthopaedic traumatologists. The treating surgeon was excluded from review., Results: The Mann-Whitney U test on the Gertzbein and Robbins system results demonstrated significantly (P = 0.02) fewer violations with robotic assistance. χ2 analysis of whether there was a cortical violation of any distance demonstrated significantly (P = 0.003) fewer cortical violations with robotic assistance. There were no neurovascular injuries in either group., Conclusion: Robotic assistance demonstrated significantly fewer unplanned cortical or neuroforaminal violations. Further research is needed with additional surgeons and sites to evaluate the accuracy of iliosacral and transsacral screw placement with robotic assistance., Level of Evidence: Therapeutic, level II., Competing Interests: B. Hartley is a consultant for Stryker. R. Zamora is a consultant for Stryker. J. B. Carlson is a consultant for BONESUPPORT, Arthrex, and Globus Medical. The remaining authors report no conflict of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Three-dimensional digital technology has been widely applied in craniofacial surgeries, particularly in conventional procedures such as facial contouring and orthognathic surgery. To some extent, the process has already been standardized. As to reconstruction surgeries of complex craniofacial deformity, however, surgical plans need to be patient-specific. Traditionally, individualized surgical treatment largely relies on the surgeon's clinical experience. The application of digital technology mainly focuses on preoperative planning and postoperative evaluation of surgical outcomes rather than intraoperative patient-specific implants or osteotomy guides. For patients with complex craniofacial deformities, requirements for accurate 3-dimensional digital technology can be much higher. This study presents a favorable surgical reconstruction of the severe craniofacial deformity using 3-dimensional digital technology, providing references for craniofacial surgeons, which could be beneficial to clinical practice and treatment efficacy., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of Mutaz B. Habal, MD.)

Summary: Digital-nerve lesions result in a loss of tactile sensation reflected by an anesthetic area (AA) at the radial or ulnar aspect of the respective digit. Available tools to monitor the recovery of tactile sense have been criticized for their lack of validity. Precise quantification of AA dynamics by three-dimensional (3D) imaging could serve as an accurate surrogate to monitor recovery after digital-nerve repair. For validation, AAs were marked on digits of healthy volunteers to simulate the AA of an impaired cutaneous innervation. The 3D models were composed from raw images that had been acquired with a 3D camera to precisely quantify relative AA for each digit (3D models, n = 80). Operator properties varied with regard to individual experience in 3D imaging and image processing. In addition, the concept was applied in a clinical case study. Results showed that images taken by experienced photographers were rated as better quality ( P < 0.001) and needed less processing time ( P = 0.020). Quantification of the relative AA was not altered significantly, regardless of experience level of the photographer ( P = 0.425) or image assembler ( P = 0.749). The proposed concept allows precise and reliable surface quantification of digits and can be performed consistently without relevant distortion by lack of examiner experience. Routine 3D imaging of the AA has the great potential to provide visual evidence of various returning states of sensation and to convert sensory nerve recovery into a metric variable with high responsiveness to temporal progress., (Copyright © 2023 by the American Society of Plastic Surgeons.)

Object: Microvascular decompression (MVD) is the best curative treatment for trigeminal neuralgia and hemifacial spasm. We used the neuronavigation to reconstruct the 3D image of cranial nerve and blood vessel to identify the neurovascular compression, and to reconstruct the venous sinus and skull to optimize craniotomy., Patients and Methods: A total of 11 trigeminal neuralgia and 12 hemifacial spasm cases were selected. All patients had preoperative MRI which included 3D Time of Flight (3D-TOF), Magnetic Resonance Venography (MRV) and computer tomography (CT) for navigation. Imaging sequences were fused and reconstructed by navigation system before operation. The 3D-TOF images were used to delineate cranial nerve and vessel. The CT and MRV images were used to mark transverse sinus and the sigmoid sinus for craniotomy. All patients underwent MVD and have the preoperative view compared with intraoperative findings., Results: Approaching to the cerebellopontine angle right after opening the dura and got no cerebellar retracion or petrosal vein rupture during craniotomy. Ten of 11 trigeminal neuralgia and all 12 hemifacial spasm patients got excellent preoperative 3D reconstruction fusion images, which were also confirmed by intraoperative findings. All 11 trigeminal neuralgia patients and 10 of 12 hemifacial spasm patients were symptom free without any neurological complications just after the surgery. Other 2 hemifacial spasm patients got delayed resolution in 2 months after surgery., Conclusions: Through the neuronavigation guided craniotomy and the 3D neurovascular reconstruction, surgeons can better identify the compression of nerve and blood vessel, and reduce complications., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

This retrospective study aimed to assess the accuracy of prebent plates and computer-aided design and manufacturing osteotomy guide for orthognathic surgery. The prebent plates correspondent to the planning model were scanned with a 3-dimensional printed model for guide design and used for fixation. Forty-two patients who underwent bimaxillary orthognathic surgery using computer-aided design and manufacturing intermediate splint with the guide (guided group: 20 patients) or with conventional fixation under straight locking miniplates (SLMs) technique (SLM group: 20 patients) were analyzed. A deviation of the maxilla between the planned and postoperative positions was evaluated using computed tomography, which was taken 2 weeks before and 4 days after the surgery. The surgery time and the infraorbital nerve paranesthesia were also evaluated. The mean deviations in the mediolateral ( x ), anteroposterior ( y ), and vertical directions ( z ) were 0.25, 0.50, and 0.37 mm, respectively, in the guided group, while that in the SLM group were 0.57, 0.52, and 0.82 mm, respectively. There were significant differences in x and z coordinates ( P <0.001). No significant difference in the surgery duration and paranesthesia was seen, suggesting the present method offers a half-millimeter accuracy for the maxillary repositioning without increasing the risk of extending surgery duration and nerve complication., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

Background: Skeletal bone age assessment for medical reasons is usually performed by conventional x-ray with use of ionizing radiation. Few pilot studies have shown the possible use of magnetic resonance imaging (MRI)., Purpose: To comprehensively evaluate feasibility and value of MRI for skeletal bone age (SBA) assessment in healthy male children., Materials and Methods: In this prospective cross-sectional study, 63 male soccer athletes with mean age of 12.35 ± 1.1 years were examined. All participants underwent 3.0 Tesla MRI with coronal T1-weighted turbo spin echo (TSE), coronal proton density (PD)-weighted turbo spin echo (TSE), and T1-weighted three-dimensional (3D) volume interpolated breath-hold examination (VIBE) sequence. Subsequently, SBA was assessed by 3 independent blinded radiologists with different levels of experience using the common Greulich-Pyle (GP) atlas and the Tanner-Whitehouse (TW2) method., Results: In a mean total acquisition time of 5:04 ± 0:47 min, MR image quality was sufficient in all cases. MRI appraisal was significantly faster ( P < 0.0001) by GP with mean duration of 1:22 ± 0:08 min vs. 7:39 ± 0:28 min by TW. SBA assessment by GP resulted in mean age of 12.8 ± 1.2 years, by TW 13.0 ± 1.4 years. Interrater reliabilities were excellent for both GP (ICC = 0.912 (95% confidence interval [CI] = 0.868-0.944) and TW (ICC = 0.988 (95% CI = 0.980-0.992) and showed statistical significance ( P < 0.001). Subdivided, for GP, ICCs were 0.822 (95% CI = 0.680-0.907) and 0.843 (95% CI = 0.713-0.919) in Under 12 and Under 14 group. For TW, ICCs were 0.978 (95% CI = 0.958-0.989) in Under 12 and 0.979 (95% CI = 0.961-0.989) in Under 14 group., Conclusion: MRI is a clinically feasible, rapidly evaluable method to assess skeletal bone age of healthy male children. Using the Greulich-Pyle (GP) atlas or the Tanner-Whitehouse (TW2) method, reliable results are obtained independent of the radiologist's experience level., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Purpose of Review: Tissue clearing enables examination of biological structures at subcellular resolution in three dimensions. It uncovered the spatial and temporal plasticity of multicellular kidney structures that occur during homeostatic stress. This article will review the recent development in tissue clearing protocols and how it facilitated the study of renal transport mechanisms and remodelling of the kidney., Recent Findings: Tissue clearing methods have evolved from primarily labelling proteins in thin tissue or individual organs to visualizing both RNA and protein simultaneously in whole animals or human organs. The use of small antibody fragments and innovative imaging techniques improved immunolabelling and resolution. These advances opened up new avenues for studying organ crosstalk and diseases that affect multiple parts of the organism. Accumulating evidence suggests that tubule remodelling can occur rapidly in response to homeostatic stress or injury, allowing for adjustments in the quantitative expression of renal transporters. Tissue clearing helped to better understand the development of tubule cystogenesis, renal hypertension and salt wasting syndromes, and revealed potential progenitor cells in the kidney., Summary: The continued evolution and improvement of tissue clearing methods can help to gain deep biological insights into the structure and function of the kidney, which will have clinical implications., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

The authors report a case of intracranial arteriovenous malformation in functional areas, initially presenting with symptomatic epilepsy was surgically excised by the Neurosurgery Department of our hospital. The patient's head computed tomography, magnetic resonance imaging, and digital subtraction angiography examination suggested intracranial arteriovenous malformations in the left frontal functional area. A preoperative 3D-reconstruction technique was used to reconstruct the malformed vascular mass, supplying arteries, draining veins, and precise surgical resection was performed. Postoperative pathology indicated vascular malformation. No seizures occurred after surgery. There was no further neurological impairment. Preoperative use of image postprocessing techniques can facilitate precise surgical resection of brain arteriovenous malformations. Three-dimensional Slicer in cerebral arteriovenous malformations in functional areas not only shortened the preoperative planning time but also improved the efficiency of the surgery. Reduce the incidence of postoperative complications. It is helpful for further popularization and application., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of Mutaz B. Habal, MD.)

Background: Skeletal dentofacial asymmetry decreases patient's attractiveness by deteriorating symmetry of facial appearance which is of great significance to individuals. Surgery-first orthognathic approach manifests its advantages of shortening treatment time and improving patient's quality of life. However, current literature on surgery-first approach mainly focuses on treating prognathism, overlooking its efficacy in improving facial symmetry of skeletal dentofacial asymmetry patients. This study aimed to assess SFA's efficacy in improving facial appearance by analyzing morphological features of asymmetric bone and facial soft tissue in a three-dimensional manner., Methods: Thirty-four patients who received orthognathic surgery in a surgery-first fashion were included. Based on three-dimensional CT reconstruction, bilateral preoperative morphological features and postoperative symmetry of hard tissue were compared respectively. Efficacy of facial soft tissue symmetry restoration was evaluated using root mean square deviation (RMSD)., Results: Asymmetric features mainly located in menton, mandibular body length, angulation between ramus and midsagittal plane (MSP), distance between gonion and MSP and so on, which were significantly restored after the whole treatment. RMSD of facial soft tissue surface were significantly declined after the treatment and prognathism was corrected simultaneously if existed., Conclusions: Surgery-first orthognathic approach is proved to be capable of treating skeletal dentofacial asymmetry effectively and efficiently., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

This study aimed to assess the reliability and agreement of automated head measurements using 3-dimensional (3D) photogrammetry in young children. Specifically, the study evaluated the agreement between manual and automated occipitofrontal circumference (OFC) measurements (n = 264) obtained from 3D images of 188 patients diagnosed with sagittal synostosis using a novel automated method proposed in this study. In addition, the study aimed to determine the interrater and intrarater reliability of the automatically extracted OFC, cephalic index, and volume. The results of the study showed that the automated OFC measurements had an excellent agreement with manual measurements, with a very strong regression score ( R2 = 0.969) and a small mean difference of -0.1 cm (-0.2%). The limits of agreement ranged from -0.93 to 0.74 cm, falling within the reported limits of agreement for manual OFC measurements. High interrater and intrarater reliability of OFC, cephalic index, and volume measurements were also demonstrated. The proposed method for automated OFC measurements was found to be a reliable alternative to manual measurements, which may be particularly beneficial in young children who undergo 3D imaging in craniofacial centers as part of their treatment protocol and in research settings that require a reproducible and transparent pipeline for anthropometric measurements. The method has been incorporated into CraniumPy, an open-source tool for 3D image visualization, registration, and optimization, which is publicly available on GitHub ( https://github.com/T-AbdelAlim/CraniumPy )., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of Mutaz B. Habal, MD.)

Background: Oxygen-enhanced magnetic resonance imaging (OE-MRI) can be used to assess regional lung function without ionizing radiation. Inhaled oxygen acts as a T1-shortening contrast agent to increase signal in T1-weighted (T1w) images. However, increase in proton density from pulmonary hyperoxic vasodilation may also contribute to the measured signal enhancement. Our aim was to quantify the relative contributions of the T1-shortening and vasodilatory effects of oxygen to signal enhancement in OE-MRI in both swine and healthy volunteers., Methods: We imaged 14 anesthetized female swine (47 ± 8 kg) using a prototype 0.55 T high-performance MRI system while experimentally manipulating oxygenation and blood volume independently through oxygen titration, partial occlusion of the vena cava for volume reduction, and infusion of colloid fluid (6% hydroxyethyl starch) for volume increase. Ten healthy volunteers were imaged before, during, and after hyperoxia. Two proton density-weighted (PDw) and 2 T1w ultrashort echo time images were acquired per experimental state. The median PDw and T1w percent signal enhancement (PSE), compared with baseline room air, was calculated after image registration and correction for lung volume changes. Differences in median PSE were compared using Wilcoxon signed rank test., Results: The PSE in PDw images after 100% oxygen was similar in swine (1.66% ± 1.41%, P = 0.01) and in healthy volunteers (1.99% ± 1.79%, P = 0.02), indicating that oxygen-induced pulmonary vasodilation causes ~2% lung proton density increase. The PSE in T1w images after 100% oxygen was also similar (swine, 9.20% ± 1.68%, P < 0.001; healthy volunteers, 10.10% ± 3.05%, P < 0.001). The PSE in T1w enhancement was oxygen dose-dependent in anesthetized swine, and we measured a dose-dependent PDw image signal increase from infused fluids., Conclusions: The contribution of oxygen-induced vasodilation to T1w OE-MRI signal was measurable using PDw imaging and was found to be ~2% in both anesthetized swine and in healthy volunteers. This finding may have implications for patients with regional or global hypoxia or vascular dysfunction undergoing OE-MRI and suggest that PDw imaging may be useful to account for oxygen-induced vasodilation in OE-MRI., Competing Interests: Conflicts of interest and sources of funding: The authors are investigators on a US Government Cooperative Research and Development Agreement with Siemens Healthcare. Siemens participated in the modification of the MRI system from 1.5 T to 0.55 T. This work was funded by the Division of Intramural Research, National Heart, Lung, and Blood Institute, National Institutes of Health (grant numbers: Z01-HL006257, Z01-HL006213). F.S. received support from the Swedish Society for Medical Research, SSMF (PD20-0043), Stockholm, Sweden; the Swedish Heart-Lung Foundation (20210205), Stockholm, Sweden; and Foundation Blanceflor, Stockholm, Sweden., (Copyright © 2023 Written work prepared by employees of the Federal Government as part of their official duties is, under the U.S. Copyright Act, a “work of the United States Government” for which copyright protection under Title 17 of the United States Code is not available. As such, copyright does not extend to the contributions of employees of the Federal Government.)

Objective: For patients without dysfunctions, the main purpose of secondary correction for craniofacial fractures is restoring facial symmetry. Computer-assisted surgery techniques including virtual surgical planning and intraoperative navigation provide the help to restore the bony symmetry as much as possible. The authors retrospectively quantitatively analyzed patients who received computer-assisted secondary correction for craniofacial fractures on facial symmetry pre and postoperation., Methods: This observational study reviewed the medical records of 17 patients requiring secondary correction for craniofacial fractures. Pre and postoperative computed tomography data were used to quantitatively analyze the changes in facial symmetry and enophthalmos., Result: All patients enrolled in this study showed mid-facial asymmetry but without dysfunctions except for enophthalmos, and 5 patients had bone defects in the frontal-temporal area. The corrective surgical techniques were different for each patient according to their specific condition. Virtual surgical planning with or without intraoperative navigation was performed for all patients. Compared with the preoperative condition, their facial symmetry was significantly improved. The maximum discrepancy value between the affected side and the mirrored unaffected side decreased from 8.10 ± 2.69 to 3.74 ± 2.02 mm postoperatively, and the mean discrepancy value decreased from 3.58 ± 1.29 to 1.57 ± 0.68 mm. In addition, the Enophthalmos Index decreased from 2.65 to 0.35 mm., Conclusion: This observational study objectively demonstrated that computer-assisted secondary correction for craniofacial fractures can significantly improve facial symmetry. And the authors recommend that virtual surgical planning and intraoperative navigation should be a must step in craniofacial fracture correction., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

Introduction: A DnCNN for image denoising trained with natural images is available in MATLAB. For Tc-99m DMSA images, any loss of clinical details during the denoising process will have serious consequences since denoised image is to be used for diagnosis. The objective of the study was to find whether this pre-trained DnCNN can be used for denoising Tc-99m DMSA images and compare its performance with block matching 3D (BM3D) filter., Materials and Methods: Two hundred forty-two Tc-99m DMSA images were denoised using BM3D filter (at sigma = 5, 10, 15, 20, and 25) and DnCNN. The original and denoised images were reviewed by two nuclear medicine physicians and also assessed objectively using the image quality metrics: SSIM, FSIM, MultiSSIM, PIQE, Blur, GCF, and Brightness. Wilcoxon signed-rank test was applied to find the statistically significant difference between the value of image quality metrics of the denoised images and the corresponding original images., Results: Nuclear medicine physicians observed no loss of clinical information in DnCNN denoised image and superior image quality compared to its original and BM3D denoised images. Edges/boundaries of the scar were found to be well preserved, and doubtful scar became obvious in the denoised image. Objective assessment also showed that the quality of DnCNN denoised images was significantly better than that of original images at P -value <0.0001., Conclusion: The pre-trained DnCNN available with MATLAB Deep Learning Toolbox can be used for denoising Tc-99m DMSA images, and the performance of DnCNN was found to be superior in comparison with BM3D filter., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)