Search

Here, we evaluate three different noble metal co-catalysts (Pd, Pt, and Au) that are present as single atoms (SAs) on the classic benchmark photocatalyst, TiO2. To trap the single atoms on the surface, we introduced controlled surface vacancies (Ti3+-Ov) on anatase TiO2 nanosheets by a thermal reduction treatment. After anchoring identical loadings of single atoms of Pd, Pt, and Au, we measure the photocatalytic H-2 generation rate and compare it to the classic nanoparticle co-catalysts on the nanosheets. While nanoparticles yield the well-established the hydrogen evolution reaction activity sequence (Pt > Pd > Au), for the single atom form, Pd radically outperforms Pt and Au. Based on density functional theory (DFT), we ascribe this unusual photocatalytic co-catalyst sequence to the nature of the charge localization on the noble metal SAs embedded in the TiO2 surface., QC 20210915

Single layer low-dimensional materials are presently of emerging interest, including in the context of magnetism. In the present report, on-surface supramolecular architecturing was further developed and employed to create surface supported two-dimensional binary spin arrays on atomically clean non-magnetic Au(111). By chemical programming of the modules, different checkerboards were produced combining phthalocyanines containing metals of different oxidation and spin states, diamagnetic zinc, and a metal-free 'spacer'. In an in-depth, spectro-microscopy and theoretical account, we correlate the structure and the magnetic properties of these tunable systems and discuss the emergence of 2D Kondo magnetism from the spin-bearing components and via the physico-chemical bonding to the underlying substrate. The contributions of the individual elements, as well as the role of the electronic surface state in the bottom substrate, are discussed, also looking towards further in-depth investigations., QC 20210921

Due to its unique physical and chemical properties, graphene is being considered as a promising material for energy conversion and storage applications. Introduction of functional groups and dopants on/in graphene is a useful strategy for tuning its properties. In order to fully exploit its potential, atomic-level understanding of its interaction with species of importance for such applications is required. We present a DFT study of the interaction of sodium atoms with epoxy-graphene and analyze how this interaction is affected upon doping with boron and nitrogen. We demonstrate how the dopants, combined with oxygen-containing groups alter the reactivity of graphene towards Na. Dopants act as attractors of epoxy groups, enhancing the sodium adsorption on doped oxygen-functionalized graphene when compared to the case of non-doped epoxy-graphene. Furthermore, by considering thermodynamics of the Na interaction with doped epoxy-graphene it has been concluded that such materials are good candidates for Na storage applications. Therefore, we suggest that controlled oxidation of doped carbon materials could lead to the development of advanced anode materials for rechargeable Na-ion batteries., QC 20190207

The ability to tune charge storage properties of graphene oxide ( GO) is of utmost importance for energy conversion applications. Here we show that the electrochemical reduction of GO is highly sensitive to the cations present in the solution. GO is reduced at more negative potential in alkali metal chloride solutions than in alkaline earth metal chlorides. During the reduction, the capacitance of GO increases from 10 to 70 times. The maximum capacitances of reduced GO are between 65 and 130 F g(-1), depending on the electrolyte and the presence of conductive additive. We propose that different interactions of cations with oxygen functional groups of GO during the reduction are responsible for the observed effect. This hypothesis has been confirmed by Density Functional Theory calculations of alkali and alkaline earth metals interactions with epoxy-functionalized graphene sheet., QC 20190206

The increasing demand and high prices of advanced catalysts motivate a constant search for novel active materials with reduced contents of noble metals. The development of thin films and core-shell catalysts seems to be a promising strategy along this path. Using density functional theory we have analyzed a number of surface properties of supported bimetallic thin films with the composition A(3)B (where A = Pt and Pd, and B = Cu, Ag and Au). We focus on the surface segregation, dissolution stability and surface electronic structure. We also address the chemisorption properties of Pd3Au thin films supported by different substrates, by probing the surface reactivity with CO. We find a strong influence of the support in the case of mono- and bilayers, while the surface strain seems to be the predominant factor in determining the surface properties of supported trilayers and thicker films. In particular, we show that the studied properties of the supported trilayers can be predicted from the lattice mismatch between the overlayer and the support. Namely, if the strain dependence of the corresponding quantities for pure strained surfaces is known, the properties of strained supported trilayers can be reliably estimated. The obtained results can be used in the design of novel catalysts and predictions of the surface properties of supported ultrathin catalyst layers., QC 20180206

The wide use of pesticides in modern agriculture and other areas results in an urgent need for their efficient removal from the environment. Adsorption of pesticides is one of the most commonly used strategies for this task. Here we analyze the adsorption of two organophosphorus pesticides, dimethoate (DMT) and chlorpyrifos (CPF), on graphene-based materials. The adsorption was found to be very sensitive to the structure of the adsorbents used. In particular, aliphatic DMT was found to prefer hydrophilic oxidized graphene surfaces. The CPF molecule, which contains an aromatic moiety, prefers adsorption on the surface of a graphene basal plane with high structural order and preserved electron system. The toxicity of pesticide solutions is reduced after adsorption, suggesting that there is no oxidation of DMT and CPF to more toxic oxo forms. We emphasize that the combination of structural properties of adsorbents and adsorbates defines the adsorption of organophosphorus pesticides on graphene-based materials, while the specific surface area of adsorbents is not the major factor., QC 20180817

Today the search for new energy resources is a crucial topic for materials science. The development of new effective catalysts for the oxygen reduction reaction can significantly improve the performance of fuel cells as well as electrocatalytic hydrogen production. This study presents the scalable synthesis of nitrogen-doped graphene oxide for the oxygen reduction reaction. The combination of an ab initio theoretical investigation of the oxygen reduction reaction (ORR) mechanism and detailed electrochemical characterization allowed the identification of electrocatalytically active nitrogen functionalities. The dominant effect on electrocatalytic activity is the presence of graphitic and pyridinic nitrogen and also N-oxide functionalities. The overpotential of ORR for nitrogen-doped graphene oxide prepared by microwave-assisted synthesis outperformed the metal-doped graphene materials., QC 20180808

We present the phase diagram of Ce1-xGdxO2-x/2 (CGO), calculated by means of a combined Density Functional Theory (DFT), cluster expansion and lattice Monte Carlo approach. We show that this methodology gives reliable results for the whole range of concentrations (x x(Gd) <= 1). In the thermodynamic equilibrium, we observe two transitions: the onset of oxygen-vacancy (O-Va) ordering at ca. 1200-3300 K for concentrations x(Gd) = 0.3-1, and a phase separation into CeO2 and C-type Gd2O3 occurring below ca. 1000 K for all concentrations. We also model 'quenched' systems, with cations immobile below 1500 K, and observe that the presence of random-like cation configurations does not prevent C-type vacancy ordering. The obtained transition temperatures for Va ordering agree rather well with existing experimental data. We analyse the effect of vacancy ordering and composition on the lattice parameters and relaxation pattern of cations., QC 20180723

Development of novel materials may often require a rational use of high price components, like noble metals, in combination with the possibility to tune their properties in a desirable way. Here we present a theoretical DFT study of Au and Pd single atoms supported by doped MgO(001). By introducing B, C and N impurities into the MgO(001) surface, the interaction between the surface and the supported metal adatoms can be adjusted. Impurity atoms act as strong binding sites for Au and Pd adatoms and can help to produce highly dispersed metal particles. The reactivity of metal atoms supported by doped MgO(001), as probed by CO, is altered compared to their counterparts on pristine MgO(001). We find that Pd atoms on doped MgO(001) are less reactive than on perfect MgO(001). In contrast, Au adatoms bind CO much more strongly when placed on doped MgO(001). In the case of Au on N-doped MgO(001) we find that charge redistribution between the metal atom and impurity takes place even when not in direct contact, which enhances the interaction of Au with CO. The presented results suggest possible ways for optimizing the reactivity of oxide supported metal catalysts through impurity engineering., QC 20180503

Quantum devices depend on addressable elements, which can be modified separately and in their mutual interaction. Self-assembly at surfaces, for example, formation of a porous (metal-) organic network, provides an ideal way to manufacture arrays of identical quantum boxes, arising in this case from the confinement of the electronic (Shockley) surface state within the pores. We show that the electronic quantum box state as well as the interbox coupling can be modified locally to a varying extent by a selective choice of adsorbates, here C-60, interacting with the barrier. In view of the wealth of differently acting adsorbates, this approach allows for engineering quantum states in on-surface network architectures., QC 20180219

Ab initio molecular dynamics (AIMD) in combination with the temperature dependent effective potential (TDEP) method has been used to go beyond the quasiharmonic approximation and study the lattice dynamics in ceria, CeO2, at finite temperature. The results indicate that the previously proposed connection between the B-1u phonon mode turning imaginary and the transition to the superionic phase in fluorite structured materials is an artifact of the failure of the quasiharmonic approximation in describing the lattice dynamics at elevated temperatures. We instead show that, in the TDEP picture, a phonon mode coupling to the E-u mode prevents the B-1u mode from becoming imaginary. We directly observe the superionic transition at high temperatures in our AIMD simulations and find that it is initiated by the formation of oxygen Frenkel pairs (FP). These FP are found to form in a collective process involving simultaneous motion of two oxygen ions., QC 20180411 Funding Agency: Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU), Grant Number: 2009 00971

Vacancies in graphene present sites of altered chemical reactivity and open possibilities to tune graphene properties by defect engineering. The understanding of chemical reactivity of such defects is essential for successful implementation of carbon materials in advanced technologies. We report the results of a systematic DFT study of atomic adsorption on graphene with a single vacancy for the elements of rows 1-6 of the periodic table of elements (PTE), excluding lanthanides. The calculations have been performed using the PBE, long-range dispersion interaction-corrected PBE (PBE+D2 and PBE+D3) and non-local vdW-DF2 functionals. We find that most elements strongly bind to the vacancy, except for the elements of groups 11 and 12, and noble gases, for which the contribution of dispersion interaction to bonding is most significant. The strength of the interaction with the vacancy correlates with the cohesive energy of the elements in their stable phases: the higher the cohesive energy is, the stronger bonding to the vacancy can be expected. As most atoms can be trapped at the SV site we have calculated the potentials of dissolution and found that in most cases the metals adsorbed at the vacancy are more "noble" than they are in their corresponding stable phases., QC 20180117

Understanding the ways graphene can be functionalized is of great importance for many contemporary technologies. Using density functional theory calculations we investigate how vacancy formation and substitutional doping by B, N, P and S affect the oxidizability and reactivity of the graphene basal plane. We find that the presence of these defects enhances the reactivity of graphene. In particular, these sites act as strong attractors for OH groups, suggesting that the oxidation of graphene could start at these sites or that these sites are the most difficult to reduce. Scaling between the OH and H adsorption energies is found on both reduced and oxidized doped graphene surfaces. Using the O-2 molecule as a probe we show that a proper modelling of doped graphene materials has to take into account the presence of oxygen functional groups., QC 20170522

H-2 production via water electrolysis plays an important role in hydrogen economy. Hence, novel cheap electrocatalysts for the hydrogen evolution reaction ( HER) are constantly needed. Here, we describe a simple method for the preparation of composite catalysts for H-2 evolution, consisting in simultaneous reduction of the graphene oxide film, and electrochemical deposition of Ni on its surface. The obtained composites (Ni@rGO), compared to pure electrodeposited Ni, show an improved electrocatalytic activity towards HER in alkaline media. We found that the activity of the Ni@rGO catalysts depends on the surface composition ( Ni vs. C mole ratio) and on the level of structural disorder of the rGO support. We suggest that HER activity is improved via H-ads spillover from the Ni particles to the rGO support, where quick recombination to molecular hydrogen is favored. A deeper insight into such a mechanism of H-2 production was achieved by kinetic Monte-Carlo simulations. These simulations enabled the reproduction of experimentally observed trends under the assumption that the support can act as a Hads acceptor. We expect that the proposed procedure for the production of novel HER catalysts could be generalized and lead to the development of a new generation of HER catalysts by tailoring the catalyst/support interface., QC 20170619

We examine the effects of the dopant type and the dopant distribution on the ion diffusion in ceria doped with rare-earth elements (Pr, Nd, Pm, Sm, Eu, and Gd). Diffusion is simulated by means of a Kinetic Monte Carlo method using input transition rates derived from diffusion barriers calculated in the framework of density functional theory (DFT). Based on diffusion simulations, we discuss the characteristics of the dopants in terms of the diffusion barriers, and study oxygen ion trajectories for different dopants and distributions. Our simulations show a trend of increasing ion diffusivity with increasing atomic number for all distributions., QC 20170620

Considering the increasing interest in the use of graphene-based materials for energy conversion and storage applications, we have performed a DFT study of Na interaction with doped graphene, both in non-oxidized and oxidized forms. Oxidation seems to play the crucial role when it comes to the interaction of doped graphene materials with sodium. The dopants act as attractors of OH groups, making the material prone to oxidation, and therefore altering its affinity towards Na. In some cases, this can result in hydroxide or water formation - an irreversible change lethal for battery performance. Our results suggest that one should carefully control the oxidation level of doped graphene-based materials if they are to be used as sodium battery electrode materials as the optimal oxidation level depends on the dopant type., QC 20171010

Simulations of diffusion in solids often produce poor statistics of diffusion events. We present an analytical expression for the statistical error in ion conductivity obtained in such simulations. The error expression is not restricted to any computational method in particular, but valid in the context of simulation of Poisson processes in general. This analytical error expression is verified numerically for the case of Gd-doped ceria by running a large number of kinetic Monte Carlo calculations., QC 20160913

A first-principles nonequilibrium molecular dynamics (NEMD) study employing the color-diffusion algorithm has been conducted to obtain the bulk ionic conductivity and the diffusion constant of gadolinium-doped cerium oxide (GDC) in the 850-1150 K temperature range. Being a slow process, ionic diffusion in solids usually requires simulation times that are prohibitively long for ab initio equilibrium molecular dynamics. The use of the color-diffusion algorithm allowed us to substantially speed up the oxygen-ion diffusion. The key parameters of the method, such as field direction and strength as well as color-charge distribution, have been investigated and their optimized values for the considered system have been determined. The calculated ionic conductivity and diffusion constants are in good agreement with available experimental data., QC 20160205

Rational catalyst design presents one of the main paradigms in the contemporary materials science. Although the electronic structure calculations can be used to search for possible candidates, realistic supported catalysts are difficult to address in this way. In this contribution we use conceptual model of the supported hydrogen evolution reaction (HER) catalyst and investigate possible processes using Kinetic Monte Carlo simulations. In specific, we look at the possibility to boost H-2 production by the H spillover to the support and the tailoring of the catalyst deposit. Different scenarios were considered depending on the nature of the HER rate determining step (RDS) on the catalyst surface and the effects of the rates of elementary processes, catalyst dispersion and morphology are analyzed. Metals with low affinity towards hydrogen should be used as catalyst supports, while H spillover can boost H-2 production if Tafel or Heyrovsky reaction is the RDS on the catalyst surface. However, this can be achieved only if the catalyst dispersion is high, while the support has to act as a Hads acceptor and enable fast Hads recombination. General instructions for the choice of the catalystlsupport combination can be used to design new advanced HER catalysts. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., QC 20160319

In this contribution we inspect the adsorption of H, OH, Cl and Pt on oxidized graphene using DFT calculations. The introduction of epoxy and hydroxyl groups on the graphene basal plane significantly alters its chemisorption properties, which can be attributed to the deformation of the basal plane and the type and distribution of these groups. We show that a general scaling relation exists between the hydrogen binding energies and the binding energies of other investigated adsorbates, which allows for a simple probing of the reactivity of oxidized graphene with only one adsorbate. The electronic states of carbon atoms located within the 2 eV interval below the Fermi level are found to be responsible for the interaction of the basal plane with the chosen adsorbates. The number of electronic states situated in this energy interval is shown to correlate with hydrogen binding energies., QC 20160324

Graphene synthesized by reduction of graphene oxide, depending on the degree of reduction, retains a certain amount of surface OH groups. Considering the surface OH groups/graphene layer system by means of density functional theory calculations, we evidenced the tendency of OH groups to cluster, resulting in enhanced system stability and no band gap opening. In the oxygen concentration range between 1.8 and 8.47 at%, with the addition of each new OH group, integral binding energy decreases, while differential binding energy shows the boost at even numbers of OH groups. Furthermore, we found that the clustering of OH groups over graphene basal plane plays a crucial role in enhancing the interactions with alkali metals. Namely, if alkali metal atoms interact with individual OH groups only, the interaction leads to an irreversible formation of MOH phase. When alkali atoms interact with clusters containing odd number of OH groups, a reversible transfer of an electron charge from the metal atom to the substrate takes place without OH removal. The strength of the interaction in general increases from Li to K. In an experimental investigation of a graphene sample which dominantly contains OH groups, we have shown that the trend in the specific interaction strength reflects to gravimetric capacitances measured in alkali metal chloride solutions. We propose that the charge stored in OH groups which interact with alkali metal cation and the pi electronic system of the graphene basal plane presents the main part of its pseudocapacitance., QC 20160816

Sm-doped ceria is a prospective electrolyte material for intermediate-temperature solid-oxide fuel cells (IT-SOFC). Equi- librium ab initio molecular dynamics (AIMD) studies of oxygen ion diffusion in this material are currently impractical due to the rareness of diffusive events on the accessible timescale. To overcome this issue we have performed ab ini- tio non-equilibrium molecular dynamics calculations of Sm-doped ceria using the color-diffusion algorithm. Applying an external force field we have been able to increase the frequency of diffusive events over the simulation time, while keeping the physical mechanism of diffusion intact. We have investigated the temperature dependence of the maximum strength of the applied external field that could be used while maintaining the response of the system in a linear regime. This allows one to obtain the diffusivity at zero field. The bulk ionic conductivity has been calculated and found to match the experimental data well. We have also compared the description of the diffusion process by our method to previous findings and show that the migration mechanism and site preference of oxygen vacancies with respect to the Sm dopants is well reproduced., QC 20160913

In line with a growing interest in the use of graphene-based materials for energy storage applications and active research in the field of rechargeable metal-ion batteries we have performed a DFT based computational study of alkali metal atoms (Li, Na and K) interaction with an oxidized graphene. The presence of oxygen surface groups (epoxy and hydroxyl) alters the chemisorption properties of graphene. In particular, we observe that the epoxy groups are redox active and enhance the alkali metal adsorption energies by a factor of 2 or more. When an alkali metal atom interacts with hydroxyl-graphene the formation of metal-hydroxide is observed. In addition to a potential boost of metal ion storage capability, oxygen functional groups also prevent the precipitation of the metal phase. By simulating lithiation/de-lithiation process on epoxy-graphenes, it was concluded that the oxidized graphene can undergo structural changes during battery operation. Our results suggest that the content and the type of oxygen surface groups should be carefully tailored to maximize the performance of metal-ion batteries. This is mainly related to the control of the oxidation level in order to provide enough active centers for metal ion storage while preserving sufficient electrical conductivity., QC 20151009

Molybdenum supported thin films of ScN, MgO and NaF with a Cu adatom have been studied in the framework of density functional theory. We have observed a charge transfer from the metal/film interface to the Cu atom and investigated its relation to surface and interface deformations. We find that a weak interaction between the metal and the film is a promising prerequisite for adatom charging. The detailed study of Cu/NaF/Mo and NaF/Mo indicates that the distortion of the NaF film caused by the Cu adsorption has essentially anharmonic character, as it is coupled to a strong charge redistribution in the system., QC 20160218

Using density-functional theory in combination with the exact muffin-tin orbital (EMTO) method and coherent potential approximation, we investigate the alloying effect on the tetragonality of Fe-C solid solution forming the basis of steels. In order to assess the accuracy of our approach, first we perform a detailed study of the performance of the EMTO method for the Fe(16)C(1) binary system by comparing the EMTO results to those obtained using the projector augmented wave method. In the second step, we introduce different substitutional alloying elements (Al, Cr, Co, Ni) into the Fe matrix and study their impact on the structural parameters. We demonstrate that a small amount of Al, Co, and Ni enhances the tetragonal lattice ratio of Fe(16)C(1) whereas Cr leaves the ratio almost unchanged. The obtained trends are correlated with the single-crystal elastic parameters calculated for carbon-free alloys., QC 20120309

Oxides with the cubic fluorite structure, e.g., ceria (CeO2), are known to be good solid electrolytes when they are doped with cations of lower valence than the host cations. The high ionic conductivity of doped ceria makes it an attractive electrolyte for solid oxide fuel cells, whose prospects as an environmentally friendly power source are very promising. In these electrolytes, the current is carried by oxygen ions that are transported by oxygen vacancies, present to compensate for the lower charge of the dopant cations. Ionic conductivity in ceria is closely related to oxygen-vacancy formation and migration properties. A clear physical picture of the connection between the choice of a dopant and the improvement of ionic conductivity in ceria is still lacking. Here we present a quantum-mechanical first-principles study of the influence of different trivalent impurities on these properties. Our results reveal a remarkable correspondence between vacancy properties at the atomic level and the macroscopic ionic conductivity. The key parameters comprise migration barriers for bulk diffusion and vacancy-dopant interactions, represented by association (binding) energies of vacancy-dopant clusters. The interactions can be divided into repulsive elastic and attractive electronic parts. In the optimal electrolyte, these parts should balance. This finding offers a simple and clear way to narrow the search for superior dopants and combinations of dopants. The ideal dopant should have an effective atomic number between 61 (Pm) and 62 (Sm), and we elaborate that combinations of Nd/Sm and Pr/Gd show enhanced ionic conductivity, as compared with that for each element separately., QC 20100622

QC 20160913

QC 20160913