Search

We present modal and non-modal linear stability analyses of Poiseuille flow through a plane channel with a porous substrate modeled using the Volume Averaged Navier-Stokes (VANS) equations. Modal stability analysis shows the destabilization of the flow with increasing porosity of the layer. The instability mode originates from the homogeneous fluid region of the channel for all the values of porosity considered but the governing mechanism changes. Perturbation kinetic energy analysis reveals the importance of viscous dissipation at low porosity values while dissipation in the porous substrate becomes significant at higher porosity. Scaling analysis highlights the invariance of the critical wavenumber with changing porosity. On the other hand, the critical Reynolds number remains invariant at low porosity and scales as Re-c similar to (H/delta)(1.4) at high porosity where delta is the typical thickness of the vorticity layer at the fluid-porous interface. This reveals the existence of a Tollmien-Schlichting-like viscous instability mechanism at low porosity values, and Rayleigh analysis shows the presence of an inviscid instability mechanism at high porosity. For the whole range of porosities considered, the non-modal analysis shows that the optimal mechanism responsible for transient energy amplification is the lift-up effect, giving rise to streaky structure as in single-phase plane Poiseuille flow. The present results strongly suggest that the transition to turbulence follows the same path as that of classical Poiseuille flow at low porosity values, while it is dictated by the modal instability for high porosity values. SAS. All rights reserved., QC 20180311

Aiming for the simulation of colloidal droplets in microfluidic devices, we present here a numerical method for two-fluid systems subject to surface tension and depletion forces among the suspended droplets. The algorithm is based on an efficient solver for the incompressible two-phase Navier–Stokes equations, and uses a mass-conserving level set method to capture the fluid interface. The four novel ingredients proposed here are, firstly, an interface-correction level set (ICLS) method; global mass conservation is achieved by performing an additional advection near the interface, with a correction velocity obtained by locally solving an algebraic equation, which is easy to implement in both 2D and 3D. Secondly, we report a second-order accurate geometric estimation of the curvature at the interface and, thirdly, the combination of the ghost fluid method with the fast pressure-correction approach enabling an accurate and fast computation even for large density contrasts. Finally, we derive a hydrodynamic model for the interaction forces induced by depletion of surfactant micelles and combine it with a multiple level set approach to study short-range interactions among droplets in the presence of attracting forces., QC 20171201

The shear-induced deformation of a capsule with a stiff nucleus, a model of eukaryotic cells, is studied numerically. The membrane of the cell and of its nucleus are modelled as a thin elastic material obeying a Neo-Hookean constitutive law. The fluid-structure coupling is obtained using an immersed boundary method. The variations induced by the presence of the nucleus on the cell deformation are investigated when varying the viscosity ratio between the inner and outer fluids, the membrane elasticity and its bending stiffness. The deformation of the eukaryotic cell is smaller than that of the prokaryotic one. The reduction in deformation increases for larger values of the capillary number. The eukaryotic cell remains thicker in itsmiddle part compared to the prokaryotic one, thus making it less flexible to pass through narrow capillaries. For a viscosity ratio of 5, the deformation of the cell is smaller than in the case of uniform viscosity. In addition, for non-zero bending stiffness of the membrane, the deformation decreases and the shape is closer to an ellipsoid. Finally, we compare the results obtained modelling the nucleus as an inner stiffer membrane with those obtained using a rigid particle., QC 20170809

Previous studies have shown that intermediate magnitude of surface tension has a counterintuitive destabilizing effect on two-phase planar jets. In the present study, the transition process in confined two-dimensional jets of two fluids with varying viscosity ratio is investigated using direct numerical simulations (DNSs). The outer fluid coflow velocity is 17% of that of the central jet. Neutral curves for the appearance of persistent oscillations are found by recording the norm of the velocity residuals in DNS for over 1000 nondimensional time units or until the signal has reached a constant level in a logarithmic scale, either a converged steady state or a "statistically steady" oscillatory state. Oscillatory final states are found for all viscosity ratios ranging from 10-1 to 10. For uniform viscosity (m = 1), the first bifurcation is through a surface-tension-driven global instability. On the other hand, for low viscosity of the outer fluid, there is a mode competition between a steady asymmetric Coanda-type attachment mode and the surface-tension-induced mode. At moderate surface tension, the first bifurcation is through the Coanda-type attachment, which eventually triggers time-dependent convective bursts. At high surface tension, the first bifurcation is through the surface-tension-dominated mode. For high viscosity of the outer fluid, persistent oscillations appear due to a strong convective instability, although it is shown that absolute instability may be possible at even higher viscosity ratios. Finally, we show that the jet is still convectively and absolutely unstable far from the inlet when the shear profile is nearly constant. Comparing this situation to a parallel Couette flow (without inflection points), we show that in both flows, a hidden interfacial mode brought out by surface tension becomes temporally and absolutely unstable in an intermediate Weber and Reynolds regime. By an energy analysis of the Couette flow case, we show that surface tensi, QC 20170509

In order to examine mechanical interactions between erythrocytes and a blood vessel surface, the frictional characteristics between erythrocytes and plates in plasma have been measured by an inclined centrifuge microscope. The frictional characteristics have been properly reproduced by a numerical simulation of a rigid erythrocyte model assuming a flat bottom surface. However, validity of the assumption has not been confirmed. The purpose of this fundamental study, therefore, was to clarify the behavior of a two-dimensional circular capsule subjected to inclined centrifugal force near a plate in a fluid. An unsteady simulation was performed for various values of the angles of the inclined centrifugal force and membrane elasticity. In equilibrium states, a lubrication domain with high pressure and a large shear stress is formed between the capsule and the base plate, and the bottom surface of the capsule becomes flat with a positive attack angle. The gap distance and translational and rotational velocities increase with decreasing membrane elasticity or increasing centrifugal force angle. The attack angle increases with increasing membrane elasticity or centrifugal force angle. The results in this study qualitatively justified the assumption of the former numerical study that erythrocytes in an inclined centrifuge microscope have a flat bottom surface and its result that they have a positive attack angle in equilibrium state., QC 20171016

QC 20161214, Design of micronozzles and control of droplet sizes by a sensitivity analysis of the flow field