Search

The dynamic interplay between cells and their native extracellular matrix (ECM) influences cellular behavior, imposing a challenge in biomaterial design. Dynamic covalent hydrogels are viscoelastic and show self-healing ability, making them a potential scaffold for recapitulating native ECM properties. We aimed to implement kinetically and thermodynamically distinct crosslinkers to prepare self-healing dynamic hydrogels to explore the arising properties and their effects on cellular behavior. To do so, aldehyde-substituted hyaluronic acid (HA) was synthesized to generate imine, hydrazone, and oxime crosslinked dynamic covalent hydrogels. Differences in equilibrium constants of these bonds yielded distinct properties including stiffness, stress relaxation, and self-healing ability. The effects of degree of substitution (DS), polymer concentration, crosslinker to aldehyde ratio, and crosslinker functionality on hydrogel properties were evaluated. The self-healing ability of hydrogels was investigated on samples of the same and different crosslinkers and DS to obtain hydrogels with gradient properties. Subsequently, human dermal fibroblasts were cultured in 2D and 3D to assess the cellular response considering the dynamic properties of the hydrogels. Moreover, assessing cell spreading and morphology on hydrogels having similar modulus but different stress relaxation rates showed the effects of matrix viscoelasticity with higher cell spreading in slower relaxing hydrogels., QC 20240520

Light responsive polymeric materials are of great interest for several applications; in particular, the NIR spectrum is considered an ideal light source for e.g. biomedical applications. Here, we have designed light sensitive poly (epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL) triblock copolymer, end-capped with modified coumarin. When dialyzed against water, the coumarin-functionalized triblock copolymers self -assembled into core-shell nanoparticles, characterized by DLS, SEM, and NMR. The hydrophobic Nile Red, used as a model guest molecule, was loaded in the nanoparticles and its release by light irradiation of selected wavelength was demonstrated by fluorescence spectroscopy. When irradiated with UV or NIR light, coumarin end-groups of the copolymer were photolyzed, converting the end groups to carboxylic acids, thus provoking the disruption of the preassembled nanoparticles, and the release of the encapsulated guest molecule., QC 20230201

Stimuli-responsive drug delivery systems (DDS) may overcome the drawbacks of conventional chemotherapy for cancer treatment. In particular, light-responsive polymer-based DDS may ensure spatio and temporal control in drug delivery. In this regard, near infrared (NIR) light triggered drug nanocarriers present several advantages when compared to UV–visible light triggered nanocarriers. This review surveys the recent development on the design, synthesis, functions, and applications of NIR photo-sensitive compounds in the development of long-wavelength light-responsive nanocarriers. Diverse NIR light responsive groups such as coumarin (CM), ortho-nitrobenzyl (ONB), 2-diazo-1,2-naphthoquinone (DNQ) and spiropyran (SP) derivatives and their photo-cleavage reaction mechanisms are discussed, as well as the use of indocyanine green (ICG) and its photo-thermal application. The loading into polymeric nanocarriers of up converting nanoparticles (UCNPs) which can convert NIR light into UV or visible light is also discussed. The described DDS are classified on the basis on the photo responsive groups. In details, the behavior of different polymeric materials such as micelles, hydrogels bearing photo responsive groups linked to bioactive molecules which are released under NIR light irradiation is reviewed and discussed. A section relative to commonly used instrument setup for drug release studies by NIR light irradiation is also presented for better understanding how the light has been used to irradiate in various experimental situations., QC 20230227

Polymethylmethacrylate is clinically used as a bone cement in various orthopedic and trauma surgeries. Post the surgery, such conventional acrylic bone cement has been reported to cause adjacent vertebral fractures; modifying it by adding linoleic acid in the formulation has shown potential in averting such fractures thanks to bone-compliant mechanical properties, besides providing convenient handling properties. Although the resulting properties are attractive, the understanding of how linoleic acid imparts such advantageous properties remain unclear. Linoleic acid is typically sterilized in an autoclave before being used in the bone cement formulation; however, there are apprehensions whether the sterilization causes degradation. In this research, sterilized and unsterilized linoleic acid were evaluated alone and with different components of bone cement, such as activator, initiator, monomer, and inhibitor, and the ensuing structural changes in linoleic acid were monitored through 1H NMR and UV–Vis. The results reveal that linoleic acid degrade due to sterilization. In addition, evidence for reactions of sterilized/unsterilized linoleic acid with activator and initiator have been collected. We hypothesize that these reactions can reduce the availability of the components for the in situ polymerization of methyl methacrylate monomer and cause the improvement in handling properties and decrease in mechanical properties., QC 20221214

A knowledge on the pullout forces of degradable craniomaxillofacial screws is essential in designing pediatric cranial implants. Herein, four non-identical commercially available screws composed of different aliphatic polyesters were fixated to 3D-printed poly(L-lactide) screw hole test rig and onto a bone substitute material using manual tapping and ultrasonic welding fixation techniques. A method for mechanical testing was developed to determine and compare their quasi-static pullout strength. The degradation of the screws was followed for up to one year in three different degrading environments. While the screw size influences the initial pullout force, the degrading environment, size, and screw composition determine the degradation rate which in turn influences the pullout force over time. Given the limited availability of standard methods, the method developed herein can be used in determining the pullout forces of degradable craniomaxillofacial screws and comparing the effectiveness of various screw insertion techniques., QC 20220524

High molar mass poly(lactic acid) (PLA) is obtained by either the polycondensation of lactic acid or ring-opening polymerization (ROP) of the cyclic dimer 2,6-dimethyl-1,4-dioxane-2,5-dione, commonly referred to as dilactide or lactide (LA). This chapter describes preparation of polymers and copolymers of LAs with different structures, using polycondensation and ROP. Typical comonomers and polymers which are used for lactic acid or LA copolymerization include glycolic acid or glycolide, poly(ethylene glycol) or poly(ethylene oxide), and so on. PLAs having amino, carboxyl, or other functional groups are well reported in the literature. These functional groups can be utilized for chemical modification or as binding sites for biomolecules to impart selective binding and adhesion. PLA and its copolymers especially when used for biological applications, besides requirement of optimization of mechanical properties by engineering at the molecular level, also demands a fast degradation polymer rate., Part of ISBN 9781119767480, 9781119767442QC 20230907

Degradable polyester-based scaffolds are ideal for tissue engineering applications where long-term structural integrity and mechanical support are a requisite. However, their hydrophobic and unfunctionalized surfaces restrain their tissue-mimetic quality. Instead, hyaluronan (HA) hydrogels are able to act as cell-instructive materials with the ability to recapitulate native tissue, although HA is rapidly metabolized in vivo. Taking advantage of these distinctly diverse material properties, a degradable and concurrent hybrid hydrogel material was developed that combines the short-term tissue-relevant properties of bio-orthogonal crosslinked HA with the long-term structural and mechanical support of poly(L-lactide-co-trimethylene carbonate) (PLATMC) scaffolds. This method rendered the formulation of transparent, minimally swelling hydrogel compartments with a desirable cell-instructive “local” elastic modulus within the scaffold matrix without impeding key material properties of PLATMC. Long-term degradability over 180 days in vivo was realized by the integral PLATMC scaffold architecture obtained through either extrusion-based 3D printing or salt-particulate leaching. Intrinsic diffusion capacity within the hydrogel elicited unaffected degradation kinetics of PLATMC in vivo, despite its autocatalytic bulk degradation characteristics displayed when 3D-printed. The effect of the processing method on the material properties of PLATMC markedly extends to its in vivo degradation characteristics, and essential uniform degradation behavior can be advanced using salt-particulate leaching. Regardless of the scaffold fabrication method, the polymer exhibited a soft and flexible nature throughout the degradation period, governed by the rubbery state of the polymer. Our results demonstrate that the physicochemical properties of the hybrid hydrogel scaffold endow it with the potential to act as a cell instructive microenvironment while not affecting key material properties of PLA, QC 20230614

Aliphatic polyesters are the synthetic polymers most commonly used in the development of resorbable medical implants / devices. Various three-dimensional (3D) scaffolds have been fabricated from these polymers and used in adipose tissue engineering. However, their systematic evaluation altogether lacks, which makes it difficult to select a suitable degradable polymer to design 3D resorbable implants and / or devices able to effectively mimic the properties of adipose tissue. Additionally, the impact of sterilization methods on the medical devices, if any, must be taken into account. We evaluate and compare five different medical-grade resorbable polyesters with l-lactide content ranging from 50 to 100 mol% and exhibiting different physiochemical properties depending on the comonomer (d-lactide, ε-caprolactone, glycolide, and trimethylene carbonate). The salt-leaching technique was used to prepare 3D microporous scaffolds. A comprehensive assessment of the physical, chemical, and mechanical properties of the scaffolds was carried out in PBS at 37 ° C. The cell-material interactions and the ability of the scaffolds to promote adipogenesis of human adipose tissue-derived stem cells were assessed in vitro. The diverse physical and mechanical properties of the scaffolds, due to the different composition of the copolymers, influenced human adipose tissue-derived stem cells proliferation and differentiation. Scaffolds made from polymers which were above their glass transition temperature and with low degree of crystallinity showed better proliferation and adipogenic differentiation of stem cells. The effect of sterilization techniques (electron beam and ethylene oxide) on the polymer properties was also evaluated. Results showed that scaffolds sterilized with the ethylene oxide method better retained their physical and chemical properties. Overall, the presented research provides (i) a detailed understanding to select a degradable polymer that has relevant properties to au, QC 20210511

Various 3D printing techniques currently use degradable polymers such as aliphatic polyesters to create well-defined scaffolds. Even though degradable polymers are influenced by the printing process, and this subsequently affects the mechanical properties and degradation profile, degradation of the polymer during the process is not often considered. Degradable scaffolds are today printed and cell-material interactions evaluated without considering the fact that the polymer change while printing the scaffold. Our methodology herein was to vary the printing parameters such as temperature, pressure, and speed to define the relationship between printability, polymer microstructure, composition, degradation profile during the process, and rheological behavior. We used high molecular weight medical-grade (co)polymers, poly(L-lactide-co-epsilon-caprolactone) (PCLA), poly(L-lactide-co-glycolide) (PLGA), and poly(D,L-lactide-co-glycolide) (PDLGA), with L-lactide content ranging from 25 to 100 mol %, for printing in an extrusion-based printer (3D Bioplotter). Optical microscopy confirmed that the polymers were printable at high resolution and good speed, until a certain degree of degradation. The results show also that printability can not be claimed just by optimizing printing parameters and highlight the importance of a careful analysis of how the polymer's structure and properties vary during printing. The polymers thermally decomposed from the first processing minute and caused a decrease in the average block length of the lactide blocks in the copolymers and generated lower crystallinity. Poly(L-lactide) (PLLA) and PCLA are printable at a higher molecular weight, less degradation before printing was possible, compared to PLGA and PDLGA, a result explained by the higher complex viscosity and more elastic polymeric melt of the copolymer containing glycolide (GA) and lactide (LA). In more detail, copolymers comprised of LA and epsilon-caprolactone (CL) formed lower molecula, QC 20200310

The advancement of 3D printing technologies in the fabrication of degradable scaffolds for tissue engineering includes, from the standpoint of the polymer chemists, an urgent need to develop new materials that can be used as ink and are suitable for medical applications. Here, we demonstrate that a copolymer of epsilon-caprolactone (CL) with low amounts of p-dioxanone (DX) (15 mol %) is a degradable and printable material that suits the requirements of melt extrusion 3D printing technologies, including negligible degradation during thermal processing. It is therefore a potential candidate for soft tissue regeneration. The semicrystalline CL/DX copolymer is processed at a lower temperature than a commercial polycaprolactone (PCL), shaped as a filament for melt extrusion 3D printing and as porous and pliable scaffolds with a gradient design. Scaffolds have Young's modulus in the range of 60-80 MPa, values suitable for provision of structural support for damaged soft tissue such as breast tissue. SEM and confocal microscope indicate that the CL/DX copolymer scaffolds support adipose stem cell attachment, spreading, and proliferation., QC 20200409

We present a solution to regenerate adipose tissue using degradable, soft, pliable 3D-printed scaffolds made of a medical-grade copolymer coated with polydopamine. The problem today is that while printing, the medical grade copolyesters degrade and the scaffolds become very stiff and brittle, being not optimal for adipose tissue defects. Herein, we have used high molar mass poly(L-lactide-co-trimethylene carbonate) (PLATMC) to engineer scaffolds using a direct extrusion-based 3D printer, the 3D Bioplotter (R). Our approach was first focused on how the printing influences the polymer and scaffold's mechanical properties, then on exploring different printing designs and, in the end, on assessing surface functionalization. Finite element analysis revealed that scaffold's mechanical properties vary according to the gradual degradation of the polymer as a consequence of the molar mass decrease during printing. Considering this, we defined optimal printing parameters to minimize material's degradation and printed scaffolds with different designs. We subsequently functionalized one scaffold design with polydopamine coating and conducted in vitro cell studies. Results showed that polydopamine augmented stem cell proliferation and adipogenic differentiation owing to increased surface hydrophilicity. Thus, the present research show that the medical grade PLATMC based scaffolds are a potential candidate towards the development of implantable, resorbable, medical devices for adipose tissue regeneration., QC 20201026

Background: Recent studies have suggested that both poly(l-lactide-co-1,5-dioxepan-2-one) (or poly(LLA-co-DXO)) and poly(l-lactide-co-epsilon-caprolactone) (or poly(LLA-co-CL)) porous scaffolds are good candidates for use as biodegradable scaffold materials in the field of tissue engineering; meanwhile, their surface properties, such as hydrophilicity, need to be further improved. Methods: We applied several different concentrations of the surfactant Tween 80 to tune the hydrophilicity of both materials. Moreover, the modification was applied not only in the form of solid scaffold as a film but also a porous scaffold. To investigate the potential application for tissue engineering, human bone marrow mesenchymal stem cells (hMSCs) were chosen to test the effect of hydrophilicity on cell attachment, proliferation, and differentiation. First, the cellular cytotoxicity of the extracted medium from modified scaffolds was investigated on HaCaT cells. Then, hMSCs were seeded on the scaffolds or films to evaluate cell attachment, proliferation, and osteogenic differentiation. The results indicated a significant increasing of wettability with the addition of Tween 80, and the hMSCs showed delayed attachment and spreading. PCR results indicated that the differentiation of hMSCs was stimulated, and several osteogenesis related genes were up-regulated in the 3% Tween 80 group. Poly(LLA-co-CL) with 3% Tween 80 showed an increased messenger Ribonucleic acid (mRNA) level of late-stage markers such as osteocalcin (OC) and key transcription factor as runt related gene 2 (Runx2). Conclusion: A high hydrophilic scaffold may speed up the osteogenic differentiation for bone tissue engineering., QC 20200818

Degradable polymers based on alpha-hydroxy acids and alpha-amino acids constitutes a potent class of biomaterials, combining high hydrolyzability with structural features that mimics peptides. Driven by the design criteria to construct isolated a-amino acid units along a main polylactide chain, a copolymer system was developed based on two monomers with distinctly different equilibrium behaviors. This was uncovered by detailed understanding on the kinetic and thermodynamic polymerizability of 3S,6S-dimethylmorpholine-2,5-dione (DMMD) and L-lactide (LLA) at low reaction temperatures. Under Bronsted base-promoted ring-opening copolymerization (ROCOP) conditions, the equilibrium nature of the copolymerization was shown susceptible to changes in the system, such as catalyst basicity, solvent polarity and initial monomer concentrations. Subsequently, high equilibrium conversions of both monomers with control over molecular weight and dispersity could be achieved within short reaction times by modulation of these factors. Thermodynamic elucidations of the copolymerization system revealed that DMMD behaved as an unstrained monomer with a large propagation barrier, favored by an increase in polymerization temperature. Ultimately, the high propagation barrier of DMMD in the system resulted in a kinetically controlled mechanism with the formation of completely isolated units of DMMD along the polylactide backbone. These results extend current ROCOP strategies of morpholine-2,5-diones and cyclic esters to a mild and selective copolymerization platform for the construction of sequence-controlled a-amino acid decorated polyesters for medical applications., QC 20200601

We consider optimal sensor scheduling with unknown communication channel statistics. We formulate two types of scheduling problems with the communication rate being a soft or hard constraint, respectively. We first present some structural results on the optimal scheduling policy using dynamic programming and assuming that the channel statistics is known. We prove that the Q-factor is monotonic and submodular, which leads to threshold-like structures in both problems. Then we develop a stochastic approximation and parameter learning frameworks to deal with the two scheduling problems with unknown channel statistics. We utilize their structures to design specialized learning algorithms. We prove the convergence of these algorithms. Performance improvement compared with the standard Q-learning algorithm is shown through numerical examples, which also discuss an alternative method based on recursive estimation of the channel quality., QC 20200409

Although additive manufacturing through melt extrusion has become increasingly popular as a route to design scaffolds with complex geometries the technique if often limited by the reduction in molecular weight and the viscoelastic response when degradable aliphatic polyesters of high molecular weight are used. Here we use a melt extruder and fused filament fabrication printer to produce a reliable nondegradative route for scaffold fabrication of medical grade copolymers of L-lactide, poly(epsilon-caprolactone-co-L-lactide), and poly(L-lactide-co-trimethylene carbonate). We show that degradation is avoided using filament extrusion and fused filament fabrication if the process parameters are deliberately chosen based upon the rheological behavior, mechanical properties, and polymer composition. Structural, mechanical, and thermal properties were assessed throughout the process to obtain comprehension of the relationship between the rheological properties and the behavior of the medical grade copolymers in the extruder and printer. Scaffolds with a controlled architecture were achieved using high-molecular-weight polyesters exhibiting a large range in the elastic response causing negligible degradation of the polymers., QC 20200217

Solutions of amorphous poly(d,l-lactide-co-trimethylene carbonate)s (PDLTMCs) in ethyl acetate work as solvent-based physical adhesives through diffusion mechanisms for a variety of aliphatic polyester-based adherents. The random PDLTMCs with a trimethylene carbonate content of 11, 16, and 20 mol% are synthesized in bulk, achieving high molecular weight, M-n, up to 128 kg mol(-1) and dispersity around 1.7. The PDLTMCs are amorphous and have a glass transition temperature in the range 34.7 to 43.6 degrees C and in agreement with the theoretical values calculated using the Fox equation. The mechanical and surface properties of the PDLTMCs are tested preparing solvent cast films, which are soft and tough and, although they have a higher contact angle than the parent homopolymer, they show higher water uptake capacity. The potential application as adhesives of the synthesized PDLTMCs is evaluated by preparing a 20 wt% solution in ethyl acetate and testing them by adhering films with different compositions as well as constructs having different geometries and surface roughness. The results demonstrate that the adhesion strength is higher on adherent films having similar chemical compositions as the adhesives and on surfaces having similar compositions to each other but different roughness. The similar chemical nature of the adhesive and adherent probably favors the diffusion mechanism through which adhesion takes place., QC 20210909

Apart from osteogenesis, neovascularization of the defect area is an important determinant for successful bone healing. Accordingly, several studies have employed the combined delivery of VEGFA and BMP2 for bone regeneration. Nevertheless, the outcomes of these studies are highly variable. The aim of our study was to compare the effectiveness of adenoviral mediated delivery of BMP2 alone and in combination with VEGFA in rat bone marrow stromal cells (rBMSC)seeded on a poly(LLA-co-CL)scaffold in angiogenesis and osteogenesis using a critical-sized rat calvarial defect model. Both mono delivery of BMP2 and the combined delivery of a lower ratio of VEGFA and BMP2 (1:4)led to up-regulation of osteogenic genes (Alpl and Runx2)and increased calcium deposition in vitro, compared with the GFP control. Micro computed tomography (microCT)analysis of the rat calvarial defect at 8 weeks showed that the mono delivery of BMP2 (43.37 ± 3.55% defect closure)was the most effective in healing the bone defect, followed by the combined delivery of BMP2 and VEGFA (27.86 ± 2.89%)and other controls. Histological and molecular analyses supported the microCT findings. Analysis of the angiogenesis, however, showed that both mono delivery of BMP2 and combined delivery of BMP2 and VEGFA had similar angiogenic effect in the calvarial defects. Examination of the key genes related to host response against the adenoviral vectors showed that the current model system was not associated with adverse immune response. Overall, the results show that the mono delivery of BMP2 was superior to the combined delivery of BMP2 and VEGFA in healing the critical-sized rat calvarial bone defect. These findings underscore the importance of appropriate growth factor combination for the successful outcome in bone regeneration., QC 20200921

Poly(L-lactide-co-epsilon-caprolactone) scaffolds were functionalised by 10 or 20 mu g/mL of human demineralised dentine matrix. Release kinetics up to 21 days and their osteogenic potential on human bone marrow stromal cells after 7 and 21 days were studied. A total of 390 proteins were identified by mass spectrometry. Bone regeneration proteins showed initial burst of release. Human bone marrow stromal cells were cultured on scaffolds physisorbed with 20 mu g/mL and cultured in basal medium (DDM group) or physisorbed and cultured in osteogenic medium or cultured on non-functionalised scaffolds in osteogenic medium. The human bone marrow stromal cells proliferated less in demineralised dentine matrix group and activated ERK/1/2 after both time points. Cells on DDM group showed highest expression of IL-6 and IL-8 at 7 days and expressed higher collagen type 1 alpha 2, SPP1 and bone morphogenetic protein-2 until 21 days. Extracellular protein revealed higher collagen type 1 and bone morphogenetic protein-2 at 21 days in demineralised dentine matrix group. Cells on DDM group showed signs of mineralisation. The functionalised scaffolds were able to stimulate osteogenic differentiation of human bone marrow stromal cells., QC 20190814

We have succeeded to modulated the degradation rate of poly(L-lactide) (PLLA) melt-spun multifilament fibers to extend the service lifetime and increase the resorption rate by using random copolymers of L-lactide and trimethylene carbonate (TMC). The presence of TMC units enabled an overall longer service lifetime but faster degradation kinetics than PLLA. By increasing the amount of TMC up to 18 mol%, multifilament fibers characterized by a homogenous degradation profile could be achieved. Such composition allowed, once the mechanical integrity was lost, a much longer retention of mechanical integrity and a faster rate of mass loss than samples containing less TMC. The degradation profile of multifilament fibers consisting of (co)polymers containing 0, 5, 10 and 18 mol% of TMC has been identified during 45 weeks in vitro hydrolysis following the molecular weight decrease, mass loss and changes in microstructure, crystallinity and mechanical properties. The fibers degraded by a two-step, autocatalyzed bulk hydrolysis mechanism. A high rate of molecular weight decrease and negligible mass loss, with a consequent drop of the mechanical properties, was observed in the early stage of degradation for fibers having TMC content up to 10 mol%. The later stage of degradation was, for these samples, characterized by a slight increase in the mass loss and a negligible molecular weight decrease. Fibers prepared with the 18 mol% TMC copolymer showed instead a more homogenous molecular weight decrease ensuring mechanical integrity for longer time and faster mass loss during the later stage of degradation., QC 20190329

We have developed a straightforward strategy to obtain semicrystalline and random copolymers of epsilon-caprolactone (CL) and p-dioxanone (DX) with thermal stabilities similar to poly(epsilon-caprolactone), PCL, but with a faster- hydrolytic degradation rate-CL/DX-copolymers-are promising inks when printing scaffolds aimed for tissue engineering. Such copolymers behave similar to PCL and resorb faster. The copolymers were synthesized by bulk ring-opening copolymerization, achieving a high yield; a molecular weight, M-n, of 57-176 kg mol(-1); and an inherent viscosity of 1.7-1.9 dL g(-1). The copolymer microstructure consisted of long CL blocks that are separated by isolated DX units. The block length and the melting point were a linear function of the DX content. The copolymers crystallize as an orthorhombic lattice that is typical for PCL, and they formed more elastic, softer, and less hydrophobic films with faster degradation rates than PCL. Relatively high thermal degradation temperatures (above 250 C), similar to PCL, were estimated by thermogravimetric analysis, and copolymer filaments for three-dimensional printing and scaffolds were produced without thermal degradation., QC 20190906

Polyester-based scaffolds covalently functionalized with arginine-glycine-aspartic acid-cysteine (RGDC) peptide sequences support the proliferation and osteogenic differentiation of stem cells. The aim is to create an optimized 3D niche to sustain human bone marrow stem cell (hBMSC) viability and osteogenic commitment, without reliance on differentiation media. Scaffolds consisting of poly(lactide-co-trimethylene carbonate), poly(LA-co-TMC), and functionalized poly(lactide) copolymers with pendant thiol groups are prepared by salt-leaching technique. The availability of functional groups on scaffold surfaces allows for an easy and straightforward method to covalently attach RGDC peptide motifs without affecting the polymerization degree. The strategy enables the chemical binding of bioactive motifs on the surfaces of 3D scaffolds and avoids conventional methods that require harsh conditions. Gene and protein levels and mineral deposition indicate the osteogenic commitment of hBMSC cultured on the RGDC functionalized surfaces. The osteogenic commitment of hBMSC is enhanced on functionalized surfaces compared with nonfunctionalized surfaces and without supplementing media with osteogenic factors. Poly(LA-co-TMC) scaffolds have potential as scaffolds for osteoblast culture and bone grafts. Furthermore, these results contribute to the development of biomimetic materials and allow a deeper comprehension of the importance of RGD peptides on stem cell transition toward osteoblastic lineage., QC 20190904

A challenge in the extrusion-based bioprinting is to find a bioink with optimal biological and physicochemical properties. The aim of this study was to evaluate the influence of wood-based cellulose nanofibrils (CNF) and bioactive glass (BaG) on the rheological properties of gelatin-alginate bioinks and the initial responses ofbone cells embedded in these inks. CNF modulated the flow behavior of the hydrogels, thus improving their printability. Chemical characterization by SEM-EDX and ion release analysis confirmed the reactivity of the BaG in the hydrogels. The cytocompatibility of the hydrogels was shown to be good, as evidenced by the viability of human osteoblast-like cells (Saos-2) in cast hydrogels. For bioprinting, 4-layer structures were printed from cell-containing gels and crosslinked with CaCl2. Viability, proliferation and alkaline phosphatase activity (ALP) were monitored over 14 d. In the BaG-free gels, Saos-2 cells remained viable, but in the presence of BaG the viability and proliferation decreased in correlation with the increased viscosity. Still, there was a constant increase in the ALP activity in all the hydrogels. Further bioprinting experiments were conducted using human bone marrow-derived mesenchymal stem cells (hBMSCs), a clinically relevant cell type. Interestingly, hBMSCs tolerated the printing process better than Saos-2 cells and the ALP indicated BaG-stimulated early osteogenic commitment. The addition of CNF and BaG to gelatin-alginate bioinks holds great potential for bone tissue engineering applications., QC 20190520

l-Lactide/trimethylene carbonate copolymers have been produced as multifilament fibers by high-speed melt-spinning. The relationship existing between the composition, processing parameters and physical properties of the fibers has been disclosed by analyzing how the industrial process induced changes at the macromolecular level, i.e., the chain microstructure and crystallinity development. A poly(l-lactide) and three copolymers having trimethylene carbonate contents of 5, 10 and 18 mol % were synthesized with high molecular weight (M n ) up to 377 kDa and narrow dispersity. Their microstructure, crystallinity and thermal properties were dictated by the composition. The spinnability was then assessed for all the as-polymerized materials: four melt-spun multifilament fibers with increasing linear density were collected for each (co)polymer at a fixed take-up speed of 1800 m min -1 varying the mass throughput during the extrusion. A linear correlation resulted between the as-spun fiber properties and the linear density. The as-spun fibers could be further oriented, developing more crystallinity and improving their tensile properties by a second stage of hot-drawing. This ability was dependent on the composition and crystallinity achieved during the melt-spinning and the parameters selected for the hot-drawing, such as temperature, draw ratio and input speed. The crystalline structure evolved to a more stable form, and the degree of crystallinity increased from 0-52% to 25-66%. Values of tensile strength and Young's modulus up to 0.32-0.61 GPa and 4.9-8.4 GPa were respectively achieved., QC 20190429

The history of resorbable polymers containing glycolide, lactide, e-caprolactone and trimethylene carbonate, with a special emphasis being placed on the time frame of the 1960s-1990s is described. Reviewing the history is valuable when looking into the future perspectives regarding how and where these monomers should be used. This story includes scientific evaluations indicating that these polymers are safe to use in medical devices, while the design of the medical device is not considered in this report. In particular, we present the data regarding the tissue response to implanted polymers, as well as the toxicity and pharmacokinetics of their degradation products. In the translation of these polymers from "the bench to the bedside," various challenges have been faced by surgeons, medical doctors, biologists, material engineers and polymer chemists. This Perspective highlights the visionary role played by the pioneers, addressing the problems that occurred on a case by case basis in translational medicine., QC 20190524

Rheological measurements have shown that lactide-based copolymers with L-lactide content between 50 and 100 mol% with varying comonomers, as well as polydioxanone (PDX), can be used in additive manufacturing analogously to poly(L-lactide) (PLLA) if their melt behaviour are balanced. The results indicate that copolymers can be melt processed if the temperature is adjusted according to the melting point, and parameters such as the speed are tuned to conteract the elastic response. Small amplitude oscillatory shear (SAOS) rheology, thermal and chemical characterisation allowed us to map the combined effect of temperature and frequency on the behaviour of six degradable polymers and their melt stability. Values of complex viscosity and Tan delta obtained through nine time sweeps by varying temperature and frequency showed that the molecular structure and the number of methylene units influenced the results, copolymers of L-lactide with D-Lactide (PDLLA) or glycolide (PLGA) had an increased elastic response, while copolymers with trimethylene carbonate (PLATMC) or epsilon-caprolactone (PCLA) had a more viscous behaviour than PLLA, with respect to their relative melting points. PDLLA and PLGA require an increased temperature or lower speed when processed, while PLATMC and PCLA can be used at a lower temperature and/or higher speed than PLLA. PDX showed an increased viscosity compared to PLLA but a similar melt behaviour. Negligible chain degradation were observed, apart from PLGA., QC 20190118

Poly(l-lactide-co-e(open)-caprolactone) (poly(LLA-co-CL)) has been blended with Tween 80 to tune the material properties and optimize cell-material interactions. Accordingly, the aims of this study were fourfold: to evaluate the effect of low concentrations of Tween 80 on the surface microstructure of 3D poly(LLA-co-CL) porous scaffolds: to determine the effect of different concentrations of Tween 80 on proliferation of bone marrow stromal cells (BMSCs) in vitro under dynamic cell culture at 7 and 21 days; to assess the influence of Tween 80 on the degradation rate of poly(LLA-co-CL) at 7 and 21 days; and in a subcutaneous rat model, to evaluate the effect on bone formation of porous scaffolds modified with 3% Tween 80 at 2 and 8 weeks. Blending 3% (w/w) Tween 80 with poly(LLA-co-CL) improves the surface wettability (p<0.001). Poly(LLA-co-CL)/3% Tween 80 shows significantly increased cellular proliferation at days 7 and 21 (p<0.001). Moreover, the presence of Tween 80 facilitates the degradation of poly(LLA-co-CL). Two weeks post-implantation, the poly(LLA-co-CL)/3% Tween 80 scaffolds exhibit significant mRNA expression of Runx2 (p=0.004). After 8 weeks, poly(LLA-co-CL)/3% Tween 80 scaffolds show significantly increased de novo bone formation, demonstrated by μ-CT (p=0.0133) and confirmed histologically. It can be concluded that blending 3% (w/w) Tween 80 with poly (LLA-co-CL) improves the hydrophilicity and osteogenic potential of the scaffolds., QC 20160627

Selection of appropriate osteoinductive growth factors, suitable delivery method and proper supportive scaffold are critical for a successful outcome in bone tissue engineering using bone marrow stromal cells (BMSC). This study examined the molecular and functional effect of a combination of adenoviral mediated expression of bone morphogenetic protein-2 (BMP2) in BMSC and recently developed and characterized, biodegradable Poly(L-lactideco-epsilon-caprolactone){poly(LLA-co-CL)} scaffolds in osteogenic molecular changes and ectopic bone formation by using in vitro and in vivo approaches. Pathway-focused custom PCR array, validation using TaqMan based quantitative RT-PCR (qRT-PCR) and ALP staining showed significant up-regulation of several osteogenic and angiogenic molecules, including ALPL and RUNX2 in ad-BMP2 BMSC group grown in poly(LLA-co-CL) scaffolds both at 3 and 14 days. Micro CT and histological analyses of the subcutaneously implanted scaffolds in NOD/SCID mice revealed significantly increased radiopaque areas, percentage bone volume and formation of vital bone in ad-BMP2 scaffolds as compared to the control groups both at 2 and 8 weeks. The increased bone formation in the ad-BMP2 group in vivo was paralleled at the molecular level with concomitant over-expression of a number of osteogenic and angiogenic genes including ALPL, RUNX2, SPP1, ANGPT1. The increased bone formation in ad-BMP2 explants was not found to be associated with enhanced endochondral activity as evidenced by qRT-PCR (SOX9 and FGF2) and Safranin O staining. Taken together, combination of adenoviral mediated BMP-2 expression in BMSC grown in the newly developed poly(LLA-co-CL) scaffolds induced expression of osteogenic markers and enhanced bone formation in vivo., QC 20160319

This study aimed to evaluate the tumorigenic potential of functionalising poly(LLA-co-CL) scaffolds. The copolymer scaffolds were functionalised with nanodiamonds (nDP) or with nDP and physisorbed BMP-2 (nDP-PHY) to enhance osteoinductivity. Culturing early neoplastic dysplastic keratinocytes (DOKLuc) on nDP modified scaffolds reduced significantly their subsequent sphere formation ability and decreased significantly the cells' proliferation in the supra-basal layers of in vitro 3D oral neoplastic mucosa (3D-OT) when compared to DOKLuc previously cultured on nDP-PHY scaffolds. Using an in vivo non-invasive environmentally-induced oral carcinogenesis model, nDP scaffolds were observed to reduce bioluminescence intensity of tumours formed by DOKLuc + carcinoma associated fibroblasts (CAF). nDP modification was also found to promote differentiation of DOKLuc both in vitro in 3D-OT and in vivo in xenografts formed by DOKLuc alone. The nDP-PHY scaffold had the highest number of invasive tumours formed by DOKLuc + CAF outside the scaffold area compared to the nDP and control scaffolds. In conclusion, in vitro and in vivo results presented here demonstrate that nDP modified copolymer scaffolds are able to decrease the tumorigenic potential of DOKLuc, while confirming concerns for the therapeutic use of BMP-2 for reconstruction of bone defects in oral cancer patients due to its tumour promoting capabilities., QC 20160524

Background. Microenvironmental cues play a major role in head and neck cancer. Biodegradable scaffolds used for bone regeneration might also act as stimulative cues for head and neck cancer. The purpose of this study was to establish an experimental model for precise and noninvasive evaluation of tumorigenic potential of microenvironmental cues in head and neck cancer. Methods. Bioluminescence was chosen to image tumor formation. Early neoplastic oral keratinocyte (DOK) cells were luciferase-transduced (DOKLuc), then tested in nonobese diabetic severe combined immunodeficient IL2r gamma(null) mice either orthotopically (tongue) or subcutaneously for their potential as "screening sensors" for diverse microenvironmental cues. Results. Tumors formed after inoculation of DOKLuc were monitored easier by bioluminescence, and bioluminescence was more sensitive in detecting differences between various microenvironmental cues when compared to manual measurements. Development of tumors from DOKLuc grown on scaffolds was also successfully monitored noninvasively by bioluminescence. Conclusion. The model presented here is a noninvasive and sensitive model for monitoring the impact of various microenvironmental cues on head and neck cancer in vivo., QC 20160531

Biobased poly(hydroxybutyrate) is produced by microorganisms under controlled conditions. It is a linear, high molecular weight, fully isotactic and highly crystalline polymer. However, it has poor mechanical and thermal properties. We have modulated the thermal properties of this material by ring-opening co-polymerization of rac-beta-butyrolactone (BL) with lactide (LA) in the presence of salan-based yttrium and aluminum catalysts. The prepared poly(hydroxybutyrate-co-lactide) copolymers were characterized by proton and carbon nuclear magnetic resonance (H-1 and C-13 NMR), size exclusion chromatography (SEC) and differential scanning calorimetry (DSC) analyses. The salan-yttrium compound was a more effective catalyst compared to the aluminum compound, affording high molecular weight copolymers with higher monomer conversion and a monomodal distribution of the molecular weights. The kinetic experiments showed a higher rate of polymerization for the LA with respect to the BL. The copolymers were amorphous and DSC showed unique transition temperatures for all of the samples. The formation of a gradient copolymer is proposed., QC 20161012

The aim is to evaluate the effect of modifying poly[(L-lactide)-co-(epsilon-caprolactone)] scaffolds (PLCL) with nanodiamonds (nDP) or with nDP+physisorbed BMP-2 (nDP+BMP-2) on in vivo host tissue response and degradation. The scaffolds are implanted subcutaneously in Balb/c mice and retrieved after 1, 8, and 27 weeks. Molecular weight analysis shows that modified scaffolds degrade faster than the unmodified. Gene analysis at week 1 shows highest expression of proinflammatory markers around nDP scaffolds; although the presence of inflammatory cells and foreign body giant cells is more prominent around the PLCL. Tissue regeneration markers are highly expressed in the nDP+BMP-2 scaffolds at week 8. A fibrous capsule is detectable by week 8, thinnest around nDP scaffolds and at week 27 thickest around PLCL scaffolds. mRNA levels of ALP, COL1 alpha 2, and ANGPT1 are signifi cantly upregulating in the nDP+BMP-2 scaffolds at week 1 with ectopic bone seen at week 8. Even when almost 90% of the scaffold is degraded at week 27, nDP are observable at implantation areas without adverse effects. In conclusion, modifying PLCL scaffolds with nDP does not aggravate the host response and physisorbed BMP-2 delivery attenuates infl ammation while lowering the dose of BMP-2 to a relatively safe and economical level., QC 20160427

It has been suggested that the effect of implanted cells on the local environment is important when selecting the appropriate cell type for tissue regeneration. Our aim was to compare the local tissue response to implanted human mesenchymal stem cells (MSC) and human umbilical vein endothelial cells (EC). MSC and EC were cultured in poly(l-lactide-co-1,5-dioxepan-2-one) scaffolds for 1 week in a bioreactor system, after which they were implanted subcutaneously in NOD/SCID mice. After 3 weeks, scaffolds were retrieved, and the mRNA expression of selected genes involved in hypoxia and inflammation was examined by real-time reverse transcription polymerase chain reaction and correlated with immunofluorescent staining for corresponding proteins. The Toll-like receptor signaling pathway was examined by superarray hybridization. The expression of 53 angiogenesis-related proteins was investigated by a proteome profiler angiogenesis antibody array kit. Vascularization was quantified using immunohistochemistry for CD31. The expression of hypoxia-inducible factors and biomarkers for angiogenesis was more strongly upregulated in response to implanted EC than to MSC, suggesting a higher sensitivity to low oxygen tension among EC. Hypoxic signaling was increased after implantation of EC compared with MSC, leading to a prolonged acute inflammatory phase that promoted ingrowth of vascular cells and establishment of the circulation. Inflammatory cytokines were also differently expressed at the gene and protein levels in the two experimental groups, resulting in altered recruitment of acute and chronic inflammatory cells. The end result of these differences was increased vessel formation within the constructs in the EC group., QC 20160308. QC 20160319

Biodegradable aliphatic polyesters such as poly(lactide) and poly(ϵ-caprolactone), largely used in tissue engineering applications, lack suitable functional groups and biological cues to enable interactions with cells. Because of the ubiquity of thiol groups in the biological environment and the pliability of thiol chemistry, we aimed to design and synthesize poly(ester) chains bearing pendant thiol-protected groups. To achieve this, 3-methyl-6-(tritylthiomethyl)-1,4-dioxane-2,5-dione, a lactide-type monomer possessing a pendant thiol-protected group, was synthesized. This molecule, when used as a monomer in controlled ring-opening polymerization in combination with lactide and ϵ-caprolactone, appeared to be a convenient "building block" for the preparation of functionalized aliphatic copolyesters, which were easily modified further. A polymeric sample bearing pyridyl disulfide groups, able to bind a cysteine-containing peptide, was efficiently obtained from a two-step modification reaction. Porous scaffolds were then prepared by blending this latter copolymer sample with poly(l-lactide-co-ϵ-caprolactone) followed by salt leaching. A further disulfide exchange reaction performed in aqueous medium formed porous scaffolds with covalently linked arginine-glycine-aspartic acid sequences. The scaffolds were characterized by thermal and mechanical tests, and scanning electron microscopy surface images revealed a highly porous morphology. Moreover, a cytotoxicity test indicated good cell viability., QC 20160518

A low dose of 1 mu g rhBMP-2 was immobilised by four different functionalising techniques on recently developed poly(L-lactide)-co-(epsilon-caprolactone) [(poly(LLA-co-CL)] scaffolds. It was either (i) physisorbed on unmodified scaffolds [PHY], (ii) physisorbed onto scaffolds modified with nanodiamond particles [nDP-PHY], (iii) covalently linked onto nDPs that were used to modify the scaffolds [nDP-COV] or (iv) encapsulated in microspheres distributed on the scaffolds [MICS]. Release kinetics of BMP-2 from the different scaffolds was quantified using targeted mass spectrometry for up to 70 days. PHY scaffolds had an initial burst of release while MICS showed a gradual and sustained increase in release. In contrast, NDP-PHY and nDP-COV scaffolds showed no significant release, although nDP-PHY scaffolds maintained bioactivity of BMP-2. Human mesenchymal stem cells cultured in vitro showed upregulated BMP-2 and osteocalcin gene expression at both week 1 and week 3 in the MICS and nDP-PHY scaffold groups. These groups also demonstrated the highest BMP-2 extracellular protein levels as assessed by ELISA, and mineralization confirmed by Alizarin red. Cells grown on the PHY scaffolds in vitro expressed collagen type 1 alpha 2 early but the scaffold could not sustain rhBMP-2 release to express mineralization. After 4 weeks post-implantation using a rat mandible critical-sized defect model, micro-CT and Masson trichrome results showed accelerated bone regeneration in the PHY, nDP-PHY and MICS groups. The results demonstrate that PHY scaffolds may not be desirable for clinical use, since similar osteogenic potential was not seen under both in vitro and in vivo conditions, in contrast to nDP-PHY and MICS groups, where continuous low doses of BMP-2 induced satisfactory bone regeneration in both conditions. The nDP-PHY scaffolds used here in critical-sized bone defects for the first time appear to have promise compared to growth factors adsorbed onto a polymer alone and the shor, QC 20150306

Constructs intended for bone tissue engineering (TE) are influenced by the initial cell seeding density. Therefore, the objective of this study was to determine the effect of bone marrow stromal stem cells (BMSCs) density loaded onto copolymer scaffolds on bone regeneration. BMSCs were harvested from rat's bone marrow and cultured in media with or without osteogenic supplements. Cells were seeded onto poly(l-lactide-co-epsilon-caprolactone) [poly(LLA-co-CL)] scaffolds at two different densities: low density (1 x 10(6) cells/scaffold) or high density (2 x 10(6) cells/scaffold) using spinner modified flasks and examined after 1 and 3 weeks. Initial attachment and spread of BMSC onto the scaffolds was recorded by scanning electron microscopy. Cell proliferation was assessed by DNA quantification and cell differentiation by quantitative real-time reverse transcriptase-polymerized chain reaction analysis (qRT-PCR). Five-millimeter rat calvarial defects (24 defects in 12 rats) were implanted with scaffolds seeded with either low or high density expanded with or without osteogenic supplements. Osteogenic supplements significantly increased cell proliferation (p < 0.001). Scaffolds seeded at high cell density exhibited higher mRNA expressions of Runx2 p=0.001, Col1 p=0.001, BMP2 p<0.001, BSP p<0.001, and OC p=0.013. More bone was formed in response to high cell seeding density (p=0.023) and high seeding density with osteogenic medium (p=0.038). Poly (LLA-co-CL) scaffolds could be appropriate candidates for bone TE. The optimal number of cells to be loaded onto scaffolds is critical for promoting Extracellular matrix synthesis and bone formation. Cell seeding density and osteogenic supplements may have a synergistic effect on the induction of new bone., QC 20151104

Polylactide (PLA) was grafted on the surface of starch (St) granules to improve the interfacial adhesion between starch granules and PLA matrix in starch/PLA blends. The grafting significantly improved strain at failure values of St-g-PLA/PLA 25:75 blends as compared to starch/PLA 25:75 blends. However, unexpectedly the water resistance of the films significantly deteriorated after the surface grafting. SEM and FTIR analysis showed that St-g-PLA was evenly distributed at the film surface and in the bulk, while unmodified starch was encapsulated inside the PLA matrix. This resulted in rapid leaching of St-g-PLA from the films during aging in water, while the unmodified starch granules were protected by PLA matrix., QC 20201118

The aim of this study was to compare the effect of different ratios of human umbilical vein endothelial cells (HUVECs) on osteogenic activity of human osteoblast-like cells (HOB) and capillary-like structure (CLS), seeded into copolymer scaffolds in a dynamic culture system. HOB and HUVEC were co-cultured into poly(L-lactide)-co-(1,5-dioxepan-2-one) [poly(LLA-co-DXO)] scaffolds at ratios of 5:1 (5:1 group) and 2:1 (2:1 group). Samples were collected after 5, 15, and 25 days. Cross-sections were processed and the CLS from HUVEC was disclosed in both groups. Cell viability was determined by dsDNA assay. Cells seeded at the ratio of 5:1 had good viability. Total RNA was isolated and the reverse transcription reaction was performed. The influences on the expression of several osteogenic genes were various with regarding to different ratios of HUVEC demonstrated by the PCR array. The RT-PCR results was in consistent with the PCR array results that several osteogenesis related genes had higher expression in the 5:1 group than in the 2:1 group, especially at day 25, such as alkaline phosphatase, insulin-like growth factor 1 (IGF1), and so forth. ELISA showed that the production of IGF1 after 25 days of incubation were higher in cells co-cultured at the 5:1 ratio than at the 2:1 ratio. The results show that under dynamic culture conditions, co-culture of HOB with a low ratio of HUVEC in copolymer scaffolds results in CLS formation and significantly influenced the expression of osteogenic markers., QC 20130403

Covalent surface functionalization is presented as a versatile tool to increase the hydrophilicity and to introduce the electroactivity of polyester films. Acrylic acid and maleic anhydride were photografted onto a polylactide (PLA) surface with a "grafting from" method to increase the surface wettability, and the subsequent coupling of conductive aniline oligomer was used to introduce electroactivity to the PLA surface. The photopolymerization of maleic anhydride and acrylic acid and the coupling, of aniline tetramer (AT) were characterized by FT-IR, UV, and TGA. The surface morphology of the PLA surface before and after modification was examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). A medium hydrophilic surface of PLA was achieved by surface modification with maleic anhydride, acrylic acid, and AT. An electrically conductive surface was obtained after grafting with AT, and the conductivity increased with increasing AT content on the surface. The hydrophilic and electroactive surface of polyesters while retaining their bulk properties offers new possibilities in biomedical applications, such as bone, cartilage, neural, and cardiovascular tissue engineering., QC 201020309

Introduction Bone fracture healing and healing problems Biomaterial scaffolds and tissue engineering in bone formation Bone tissue engineering Biomaterial scaffolds Synthetic scaffolds Micro- and nanostructural properties of scaffolds Conclusion Mesenchymal stem cells and osteogenesis Bone tissue Origin of osteoblasts Isolation and characterization of bone marrow derived MSC In vitro differentiation of MSC into osteoblast lineage cells In vivo differentiation of MSC into bone Factors and pathways controlling osteoblast differentiation of hMSC Defining the relationship between osteoblast and adipocyte differentiation from MSC MSC and sex hormones Effect of aging on osteoblastogenesis Conclusion Embryonic, foetal and adult stem cells in osteogenesis Cell-based therapies for bone Specific features of bone cells needed to be advantageous for clinical use Development of therapeutic biological agents Clinical application concerns Conclusion Platelet-rich plasma (PRP), growth factors and osteogenesis PRP effects in vitro on the cells involved in bone repair PRP effects on osteoblasts PRP effects on osteoclasts PRP effects on endothelial cells PRP effects in vivo on experimental animals The clinical use of PRP for bone repair Non-union Distraction osteogenesis Spinal fusion Foot and ankle surgery Total knee arthroplasty Odontostomatology and maxillofacial surgery Conclusion Molecular control of osteogenesis TGF-beta signalling FGF signalling IGF signalling PDGF signalling MAPK signalling pathway Wnt signalling pathway Hedgehog signalling Notch signalling Ephrin signalling Transcription factors regulating osteoblast differentiation Conclusion Summary This invited review covers research areas of central importance for orthopaedic and maxillofacial bone tissue repair, including normal fracture healing and healing problems, biomaterial scaffolds for tissue engineering, mesenchymal and foetal stem cells, effects of sex steroids on mesenchymal stem cells, use of platelet-rich pla, QC 20110615

Degradable and electrically conductive polysaccharide hydrogels (DECPHs) have been synthesized by functionalizing polysaccharide with conductive aniline oligomers. DECPHs based on chitosan (CS), aniline tetramer (AT), and glutaraldehyde were obtained by a facile one-pot reaction by using the amine group of CS and AT under mild conditions, which avoids the multistep reactions and tedious purification involved in the synthesis of degradable conductive hydrogels in our previous work. Interestingly, these one-pot hydrogels possess good film-forming properties, electrical conductivity, and a pH-sensitive swelling behavior. The chemical structure and morphology before and after swelling of the hydrogels were verified by FT-IR, NMR, and SEM. The conductivity of the hydrogels was tuned by adjusting the content of AT. The swelling ratio of the hydrogels was altered by the content of tetraaniline and crosslinker. The hydrogels underwent slow degradation in a buffer solution. The hydrogels obtained by this facile approach provide new possibilities in biomedical applications, for example, biodegradable conductive hydrogels, films, and scaffolds for cardiovascular tissue engineering and controlled drug delivery.

Incorporation of osteoinductive factors in a suitable scaffold is considered a promising strategy for generating osteogenic biomaterials. Resveratrol is a polyphenol found in parts of certain plants, including nuts, berries and grapes. It is known to increase DNA synthesis and alkaline phosphatase (ALP) activity in osteoblasts and to prevent femoral bone loss in ovariectomized (OVX) rats. In the present study resveratrol was coupled through a hydrolysable covalent bond with the carboxylic acid groups in porous poly-epsilon-caprolactone (PCL) surface grafted with acrylic acid (AA). The osteogenic effect of this new scaffold was evaluated in mesenchymal cell culture and in the rat calvarial defect model. We found that the incorporation of resveratrol caused increased ALP activity of rat bone marrow stromal cells and enhanced mineralization of the cell-scaffold composites in vitro. After 8 weeks the calvarial defects implanted with resveratrol-conjugated PCL displayed a higher X-ray density than the defects implanted with control PCL. Bone-like structures, positively immunostained for bone sialoprotein, were shown to be more extensively formed in the resveratrol-conjugated PCL These results show that incorporation of resveratrol into the AA-functionalized porous PCL scaffold led to a significant increase in osteogenesis. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved., QC 20110307

Degradation characteristics in response to electron beam sterilization of designed and biodegradable aliphatic polyester scaffolds are relevant for clinically successful synthetic graft tissue regeneration Scaffold degradation in vitro and in vivo were documented and correlated to the macroscopic structure and chemical design of the original polymer The materials tested were of inherently diverse hydrophobicity and crystallinity poly(L-lactide) (poly(LLA)) and random copolymers from L-lactide and epsilon-caprolactone or 1.5-dioxepan-2-one, fabricated into porous and non-porous scaffolds After sterilization, the samples underwent hydrolysis in vitro for up to a year In vivo, scaffolds were surgically implanted into rat calvarial defects and retrieved for analysis after 28 and 91 days In vitro, poly(L-lactide-co-1, 5-dioxepan-2-one) (poly(LLA-co-DXO)) samples degraded most rapidly during hydrolysis, due to the pronounced chain-shortening reaction caused by the sterilization. This was indicated by the rapid decrease in both mass and molecular weight of poly(LLA-co-DXO). Poly(L-lactide-co-epsilon-caprolactone) (poly(LLA-co-CL)) samples were also strongly affected by sterilization, but mass loss was more gradual; molecular weight decreased rapidly during hydrolysis Least affected by sterilization were the poly(LLA) samples, which subsequently showed low mass loss rate and molecular weight decrease during hydrolysis. Mechanical stability varied greatly. poly(LLA-co-CL) withstood mechanical testing for up to 182 days, while poly(LLA) and poly(LLA-co-DXO) samples quickly became too brittle Poly(LLA-co-DXO) samples unexpectedly degraded more rapidly in vitro than in vivo. After sterilization by electron beam irradiation, the three biodegradable polymers present widely diverse degradation profiles, both in vitro and in vivo. Each exhibits the potential to be tailored to meet diverse clinical tissue engineering requirements, QC 20150727

Our recent in vitro study demonstrated that endothelial cells (ECs) might influence the differentiation of bone marrow stromal cells (BMSCs). Therefore, the aim of this study was to describe this effect in vivo, using a rat calvarial bone defect model. BMSCs were isolated from femurs of two-donor Lewis rats and expanded in alpha-minimum essential medium containing 10% fetal bovine serum. One fifth of BMSCs were induced and differentiated into ECs in an Endothelial Cell Growth Medium-2 and then characterized by a flow cytometry. The remaining BMSCs were cultured in freshly prepared osteogenic stimulatory medium, containing dexamethasone, ascorbic acid and beta-glycerophosphate. Either BMSCs alone (BMSC-group) or co-cultured ECs/BMSCs (CO-group) were seeded into poly(L-lactide-co-1,5-dioxepan-2-one) [poly(LLA-co-DXO)] scaffolds, cultured in spinner flasks, and then implanted into symmetrical calvarial defects prepared in recipient rats. The animals were sacrificed after 2 months. The formation of new bone was evaluated by radiography and histology and by the expression of osteogenic markers using reverse transcriptase-polymerized chain reaction (RT-PCR). To investigate vessel formation, histological staining was performed with EC's markers. The radiographical and histological results showed more rapid bone formation in the CO-than in the BMSC-group. However, the expression of EC's marker was similar on both groups by histological analysis after 2 months postoperatively. Furthermore, the CO-group exhibited greater expression of osteogenic markers as demonstrated by RT-PCR. The results are consistent with the previous in vitro findings that poly(LLA-co-DXO) scaffold might be suitable candidate for bone tissue engineering. In vivo, bone regeneration was enhanced by a construct of the polymer scaffold loaded with co-cultured cells., QC 20110501

Constructs intended for bone tissue engineering are influenced by the initial cell seeding procedure. The seeding method should be rapid, convenient, improve cell spatial distribution, and have no negative effects on cellular viability and differentiation. This study aimed to compare the effect of short-run seeding methods (centrifuge and vortex) with a static method on the scaffolds prepared from poly(L-lactide-co-1,5-dioxepan-2-one) by solvent-casting particulate-leaching (SCPL) technique. Human osteoblast-like cells (HOB) were seeded by the three methods described above. The seeding efficiency was determined by attached cell numbers. Cellular proliferation was analyzed by WST-1 and dsDNA assay. Cell distribution was examined by scanning electron (SEM) and fluorescence microscopy. Expression of Alkaline Phosphatase (ALP), Collagen type I (Col I), Osteocalcin (OC) and Proliferating Cell Nuclear Antigen (PCNA) were determined by real time RT-PCR. Results indicated that centrifuge and vortex increased seeding efficiency and had no negative effects on cellular viability. The data obtained by the fluorescence microscope confirmed the SEM results that the vortex method improved cell distribution through the scaffolds more than the other two methods (p<0.05). The RT-PCR results showed no significant differences on the expression of mRNA between the three methods of the above markers. The vortex method was found to be a simple and feasible seeding method for the poly(L-lactide-co-1,5-dioxepan-2-one) scaffolds., QC 20110823

A simple route to size-tunable nanoparticles from the self-assembly of degradable and electrically conductive coil rod coil triblock copolymers based on an aliphatic polyester and conducting species is presented. A series of coil rod coil triblock copolymers consisting of a middle aniline pentamer (AP) segment and two polycaprolactone (PCL) segments were easily synthesized by a combination of a ring-opening polymerization of CL initiated by an aniline dimer (AD) giving AD-PCL and an oxidative coupling reaction between the AD-PCL and p-phenylenediamine. This strategy avoids the multistep reaction used in previous work. The electroactivity of these copolymers was investigated by UV and cyclic voltammetry. The conductivity of the copolymers was dependent on the AP content and the conductivity mechanism of the triblock copolymers is discussed. Interestingly, these triblock copolymers can undergo self-assembly in selective solvent such as CHCl(3) as indicated by NMR and transmission electron microscope (TEM) observations. Dynamic light scattering (DLS) showed that the size of the nanoparticles was dependent on the molecular weight of the copolymers and on the oxidation state of the AP, The morphology of the nanoparticles was studied by TEM and SEM. These triblock copolymers and their size-tunable nanopartides with degradability and electroactivity offer new possibilities in biomedical applications, such as controlled drug delivery, biosensors, and cardiovascular and neural tissue engineering., QC 20110929

Degradable electrically conducting hydrogels (DECHs), which combine the unique properties of degradable polymers and electrically conducting hydrogels, were synthesized by introducing biodegradable segments into conductive hydrogels. These DECHs were obtained by joining together the photopolymerized macromer acrylated poly(D,L-lactide)-poly(ethylene glycol)-poly(D,L-lactide) (AC-PLA-PEG-PLA-AC), glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) network and aniline tetramer (AT) by the coupling reaction between AT and the GMA The electrical conductivity and swelling behavior of these DECHs were tuned by changing the AT content in the hydrogels, the cross-linking degree, and the environmental pH value. The good electroactivity and thermal stability of these hydrogels were demonstrated by UV-vis spectroscopy, cyclic voltammetry, and TGA tests. The chemical structure and morphology of these polymers were characterized by NMR, FT-IR, SEC, and SEM. These hydrogels possessing both degradability and electrical conductivity represent a new class of biomaterial and will lead to various new possibilities in biomedical applications., QC 20110321

We present a universal strategy for the facile synthesis of degradable and electroactive block copolymers and organogels (DEBCGs) based on aniline oligomers and polyesters in a two-step approach, here exemplified by the preparation of a series of DECBCGs based on aniline tetramer (AT) and poly(e-caprolactone) (PCL). Polyesters with an aniline dimer (AD) segment were first obtained by controlled ring-opening polymerization (ROP) of e-caprolactone initiated by the amine group of AD with or without 2,2-bis(epsilon-caprolactone-4-yl) propane (BCP). The postpolymerization modification via an oxidative coupling reaction between AD and a polyester was then used to form the electroactive segment AT in the copolymers or organogels. The molecular weight and conductivity of the block copolymers and organogels were controlled by the AT content. The chemical structure, electroactivity, and thermal properties of DEBCGs were investigated by FT-IR, NMR, SEC, UV, cyclic voltammetry, TGA, and DSC. Our general strategy for the synthesis of DECBCGs avoids the multiple step reactions and low efficiency involved in previous work.

In tissue engineering, the resorbable aliphatic polyester poly(L-lactide) (PLLA) is used as scaffolds in bone regeneration. Copolymers of poly(L-lactide)-co-(epsilon-caprolactone) [poly(LLA-co-CL)] and poly(L-lactide)-co-(1,5-dioxepan-2-one) [poly(LLA-co-DXO)], with superior mechanical properties to PLLA, have been developed to be used as scaffolds, but the influence on the osteogenic potential is unclear. This in vitro study of test scaffolds of poly(LLA-co-CL) and poly(LLA-co-DXO) using PLLA scaffolds as a control demonstrates the attachment and proliferation of human osteoblast-like cells (HOB) as measured by SEM and a methylthiazol tetrazolium (MTT) colorimetric assay, and the progression of HOB osteogenesis for up to 3 weeks; expressed as synthesis of the osteoblast differentiation markers: collagen type 1 (Col 1), alkaline phosphatase, bone sialoprotein, osteocalcin (OC), osteopontin and runt related gene 2 (Runx2). Surface analysis disclosed excellent surface attachment, spread and penetration of the cells into the pores of the test scaffolds compared to the PLLA. MTT results indicated that test scaffolds enhanced the proliferation of HOBs. Cells grown on the test scaffolds demonstrated higher synthesis of Col 1 and OC and also increased bone markers mRNA expression. Compared to scaffolds of PLLA, the poly(LLA-co-CL) and poly(LLA-co-DXO) scaffolds enhanced attachment, proliferation, and expression of osteogenic markers by HOBs in vitro. Therefore, these scaffolds might be appropriate carriers for bone engineering. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 94A: 631-639, 2010, QC 20101229

A fundamental component of bone tissue engineering is an appropriate scaffold as a carrier for osteogenic cells. The aim of the study was to evaluate the response of human bone marrow stromal cells (BMSC) to scaffolds made of three biodegradable polymers: poly(L-lactide-co-epsilon-caprolactone) (poly(LLA-co-CL)), poly(L-lactide-co-1,5dioxepan-2-one) (poly(LLA-co-DXO)), and poly(L-lactide) (poly(LLA)). Cellular response was evaluated in terms of attachment, proliferation, and differentiation. SEM disclosed earlier cell attachment and better spreading on poly(LLA-co-CL) and poly(LLA-co-DXO) scaffolds than on poly(LLA) after 1 h. At 24 h and 14 days postseeding, BMSCs had spread well, forming multiple cellular layers on the scaffolds. Cell proliferation was higher on poly(LLA-co-CL) and on poly(LLA-co-DXO) than on poly(LLA) after 1 and 7 days. Cell growth cycles of BMSC were longer on the scaffolds than on coverslips. After 7 and 14 days cultivation on scaffolds, the expression of osteogenic markers such as ALP, Col I, OPN, and Runx2 were stimulated by BMSC, which indicating that poly(LLA-co-DXO), poly(LLA-co-CL), and poly(LLA) could support the osteogenic differentiation of BMSC in vitro. Poly(LLA-co-CL) and poly(LLA-co-DXO) promoted better attachment and growth of BMSC than poly(LLA). BMSC also retained their osteogenic differentiation potential, indicating biological activity of BMSC on the scaffolds. The promising results of this in vitro study indicate that these copolymers warrant further evaluation for potential application in bone tissue engineering., QC 20101210