Search

Base station cooperation is an attractive way of increasing the spectral efficiency in multiantenna communication. By serving each terminal through several base stations in a given area, intercell interference can be coordinated and higher performance achieved, especially for terminals at cell edges. Most previous work in the area has assumed that base stations have common knowledge of both data dedicated to all terminals and full or partial channel state information (CSI) of all links. Herein, we analyze the case of distributed cooperation where each base station has only local CSI, either instantaneous or statistical. In the case of instantaneous CSI, the beamforming vectors that can attain the outer boundary of the achievable rate region are characterized for an arbitrary number of multiantenna transmitters and single-antenna receivers. This characterization only requires local CSI and justifies distributed precoding design based on a novel virtual signal-to-interference noise ratio (SINR) framework, which can handle an arbitrary SNR and achieves the optimal multiplexing gain. The local power allocation between terminals is solved heuristically. Conceptually, analogous results for the achievable rate region characterization and precoding design are derived in the case of local statistical CSI. The benefits of distributed cooperative transmission are illustrated numerically, and it is shown that most of the performance with centralized cooperation can be obtained using only local CSI., © 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20101130

Base station cooperation is an attractive way of increasing the spectral efficiency in multiantenna communication. By serving each terminal through several base stations in a given area, intercell interference can be coordinated and higher performance achieved, especially for terminals at cell edges. Most previous work in the area has assumed that base stations have common knowledge of both data dedicated to all terminals and full or partial channel state information (CSI) of all links. Herein, we analyze the case of distributed cooperation where each base station has only local CSI, either instantaneous or statistical. In the case of instantaneous CSI, the beamforming vectors that can attain the outer boundary of the achievable rate region are characterized for an arbitrary number of multiantenna transmitters and single-antenna receivers. This characterization only requires local CSI and justifies distributed precoding design based on a novel virtual signal-to-interference noise ratio (SINR) framework, which can handle an arbitrary SNR and achieves the optimal multiplexing gain. The local power allocation between terminals is solved heuristically. Conceptually, analogous results for the achievable rate region characterization and precoding design are derived in the case of local statistical CSI. The benefits of distributed cooperative transmission are illustrated numerically, and it is shown that most of the performance with centralized cooperation can be obtained using only local CSI., © 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20101130

Base station cooperation is an attractive way of increasing the spectral efficiency in multiantenna communication. By serving each terminal through several base stations in a given area, intercell interference can be coordinated and higher performance achieved, especially for terminals at cell edges. Most previous work in the area has assumed that base stations have common knowledge of both data dedicated to all terminals and full or partial channel state information (CSI) of all links. Herein, we analyze the case of distributed cooperation where each base station has only local CSI, either instantaneous or statistical. In the case of instantaneous CSI, the beamforming vectors that can attain the outer boundary of the achievable rate region are characterized for an arbitrary number of multiantenna transmitters and single-antenna receivers. This characterization only requires local CSI and justifies distributed precoding design based on a novel virtual signal-to-interference noise ratio (SINR) framework, which can handle an arbitrary SNR and achieves the optimal multiplexing gain. The local power allocation between terminals is solved heuristically. Conceptually, analogous results for the achievable rate region characterization and precoding design are derived in the case of local statistical CSI. The benefits of distributed cooperative transmission are illustrated numerically, and it is shown that most of the performance with centralized cooperation can be obtained using only local CSI., © 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20101130

Base station cooperation is an attractive way of increasing the spectral efficiency in multiantenna communication. By serving each terminal through several base stations in a given area, intercell interference can be coordinated and higher performance achieved, especially for terminals at cell edges. Most previous work in the area has assumed that base stations have common knowledge of both data dedicated to all terminals and full or partial channel state information (CSI) of all links. Herein, we analyze the case of distributed cooperation where each base station has only local CSI, either instantaneous or statistical. In the case of instantaneous CSI, the beamforming vectors that can attain the outer boundary of the achievable rate region are characterized for an arbitrary number of multiantenna transmitters and single-antenna receivers. This characterization only requires local CSI and justifies distributed precoding design based on a novel virtual signal-to-interference noise ratio (SINR) framework, which can handle an arbitrary SNR and achieves the optimal multiplexing gain. The local power allocation between terminals is solved heuristically. Conceptually, analogous results for the achievable rate region characterization and precoding design are derived in the case of local statistical CSI. The benefits of distributed cooperative transmission are illustrated numerically, and it is shown that most of the performance with centralized cooperation can be obtained using only local CSI., © 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20101130

Base station cooperation is an attractive way of increasing the spectral efficiency in multiantenna communication. By serving each terminal through several base stations in a given area, intercell interference can be coordinated and higher performance achieved, especially for terminals at cell edges. Most previous work in the area has assumed that base stations have common knowledge of both data dedicated to all terminals and full or partial channel state information (CSI) of all links. Herein, we analyze the case of distributed cooperation where each base station has only local CSI, either instantaneous or statistical. In the case of instantaneous CSI, the beamforming vectors that can attain the outer boundary of the achievable rate region are characterized for an arbitrary number of multiantenna transmitters and single-antenna receivers. This characterization only requires local CSI and justifies distributed precoding design based on a novel virtual signal-to-interference noise ratio (SINR) framework, which can handle an arbitrary SNR and achieves the optimal multiplexing gain. The local power allocation between terminals is solved heuristically. Conceptually, analogous results for the achievable rate region characterization and precoding design are derived in the case of local statistical CSI. The benefits of distributed cooperative transmission are illustrated numerically, and it is shown that most of the performance with centralized cooperation can be obtained using only local CSI., © 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20101130

This paper considers downlink multiantenna communication with base stations that perform cooperative precoding in a distributed fashion. Most previous work in the area has assumed that transmitters have common knowledge of both data symbols of all users and full or partial channel state information (CSI). Herein, we assume that each base station only has local CSI, either instantaneous or statistical. For the case of instantaneous CSI, a parametrization of the beamforming vectors used to achieve the outer boundary of the achievable rate region is obtained for two multi-antenna transmitters and two single-antenna receivers. Distributed generalizations of classical beamforming approaches that satisfy this parametrization are provided, and it is shown how the distributed precoding design can be improved using the so-called virtual SINR framework [1]. Conceptually analog results for both the parametrization and the beamforming design are derived in the case of local statistical CSI. Heuristics on the distributed power allocation are provided in both cases, and the performance is illustrated numerically., © 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20110301

This paper considers downlink multiantenna communication with base stations that perform cooperative precoding in a distributed fashion. Most previous work in the area has assumed that transmitters have common knowledge of both data symbols of all users and full or partial channel state information (CSI). Herein, we assume that each base station only has local CSI, either instantaneous or statistical. For the case of instantaneous CSI, a parametrization of the beamforming vectors used to achieve the outer boundary of the achievable rate region is obtained for two multi-antenna transmitters and two single-antenna receivers. Distributed generalizations of classical beamforming approaches that satisfy this parametrization are provided, and it is shown how the distributed precoding design can be improved using the so-called virtual SINR framework [1]. Conceptually analog results for both the parametrization and the beamforming design are derived in the case of local statistical CSI. Heuristics on the distributed power allocation are provided in both cases, and the performance is illustrated numerically., © 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20110301

This paper considers downlink multiantenna communication with base stations that perform cooperative precoding in a distributed fashion. Most previous work in the area has assumed that transmitters have common knowledge of both data symbols of all users and full or partial channel state information (CSI). Herein, we assume that each base station only has local CSI, either instantaneous or statistical. For the case of instantaneous CSI, a parametrization of the beamforming vectors used to achieve the outer boundary of the achievable rate region is obtained for two multi-antenna transmitters and two single-antenna receivers. Distributed generalizations of classical beamforming approaches that satisfy this parametrization are provided, and it is shown how the distributed precoding design can be improved using the so-called virtual SINR framework [1]. Conceptually analog results for both the parametrization and the beamforming design are derived in the case of local statistical CSI. Heuristics on the distributed power allocation are provided in both cases, and the performance is illustrated numerically., © 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20110301

This paper considers downlink multiantenna communication with base stations that perform cooperative precoding in a distributed fashion. Most previous work in the area has assumed that transmitters have common knowledge of both data symbols of all users and full or partial channel state information (CSI). Herein, we assume that each base station only has local CSI, either instantaneous or statistical. For the case of instantaneous CSI, a parametrization of the beamforming vectors used to achieve the outer boundary of the achievable rate region is obtained for two multi-antenna transmitters and two single-antenna receivers. Distributed generalizations of classical beamforming approaches that satisfy this parametrization are provided, and it is shown how the distributed precoding design can be improved using the so-called virtual SINR framework [1]. Conceptually analog results for both the parametrization and the beamforming design are derived in the case of local statistical CSI. Heuristics on the distributed power allocation are provided in both cases, and the performance is illustrated numerically., © 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20110301

This paper considers downlink multiantenna communication with base stations that perform cooperative precoding in a distributed fashion. Most previous work in the area has assumed that transmitters have common knowledge of both data symbols of all users and full or partial channel state information (CSI). Herein, we assume that each base station only has local CSI, either instantaneous or statistical. For the case of instantaneous CSI, a parametrization of the beamforming vectors used to achieve the outer boundary of the achievable rate region is obtained for two multi-antenna transmitters and two single-antenna receivers. Distributed generalizations of classical beamforming approaches that satisfy this parametrization are provided, and it is shown how the distributed precoding design can be improved using the so-called virtual SINR framework [1]. Conceptually analog results for both the parametrization and the beamforming design are derived in the case of local statistical CSI. Heuristics on the distributed power allocation are provided in both cases, and the performance is illustrated numerically., © 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.QC 20110301

In the design of next generation multiuser communication systems, multiple antenna transmission is an essential part providing spatial multiplexing gain and allowing efficient use of resources. A major limiting factor in the resource allocation is the amount of channel state information (CSI) available at the transmitter, particularly in multiuser systems where the feedback from each user terminal must be limited. To this effect we propose two independent approaches for an efficient representation of the channel in multiuser MIMO systems. In the first approach, channel quantization is considered where the total number of feedback bits is limited. A resource allocation scheme is proposed where the available rate is split between the scheduling phase, where all users feed back a coarse CSI quantization, and the precoding phase where the selected receivers refine their CSI. The optimum splitting of the available feedback rate provides a large increase in performance and even simple heuristic splitting gives a noticeable advantage. In the second approach, we exploit a combination of instantaneous and statistical channel information. For spatially correlated Rayleigh and Ricean channels, it is shown that the CSI to large extent can be represented by the channel norm when the long-term channel statistics are known. Within a minimum mean square error (MMSE) estimation framework, feedback of a few bits of the quantized channel norm is sufficient to perform efficient resource allocation and achieve performance close to that of full CSI., QC 20111101

In the design of next generation multiuser communication systems, multiple antenna transmission is an essential part providing spatial multiplexing gain and allowing efficient use of resources. A major limiting factor in the resource allocation is the amount of channel state information (CSI) available at the transmitter, particularly in multiuser systems where the feedback from each user terminal must be limited. To this effect we propose two independent approaches for an efficient representation of the channel in multiuser MIMO systems. In the first approach, channel quantization is considered where the total number of feedback bits is limited. A resource allocation scheme is proposed where the available rate is split between the scheduling phase, where all users feed back a coarse CSI quantization, and the precoding phase where the selected receivers refine their CSI. The optimum splitting of the available feedback rate provides a large increase in performance and even simple heuristic splitting gives a noticeable advantage. In the second approach, we exploit a combination of instantaneous and statistical channel information. For spatially correlated Rayleigh and Ricean channels, it is shown that the CSI to large extent can be represented by the channel norm when the long-term channel statistics are known. Within a minimum mean square error (MMSE) estimation framework, feedback of a few bits of the quantized channel norm is sufficient to perform efficient resource allocation and achieve performance close to that of full CSI., QC 20111101

In the design of next generation multiuser communication systems, multiple antenna transmission is an essential part providing spatial multiplexing gain and allowing efficient use of resources. A major limiting factor in the resource allocation is the amount of channel state information (CSI) available at the transmitter, particularly in multiuser systems where the feedback from each user terminal must be limited. To this effect we propose two independent approaches for an efficient representation of the channel in multiuser MIMO systems. In the first approach, channel quantization is considered where the total number of feedback bits is limited. A resource allocation scheme is proposed where the available rate is split between the scheduling phase, where all users feed back a coarse CSI quantization, and the precoding phase where the selected receivers refine their CSI. The optimum splitting of the available feedback rate provides a large increase in performance and even simple heuristic splitting gives a noticeable advantage. In the second approach, we exploit a combination of instantaneous and statistical channel information. For spatially correlated Rayleigh and Ricean channels, it is shown that the CSI to large extent can be represented by the channel norm when the long-term channel statistics are known. Within a minimum mean square error (MMSE) estimation framework, feedback of a few bits of the quantized channel norm is sufficient to perform efficient resource allocation and achieve performance close to that of full CSI., QC 20111101

In the design of next generation multiuser communication systems, multiple antenna transmission is an essential part providing spatial multiplexing gain and allowing efficient use of resources. A major limiting factor in the resource allocation is the amount of channel state information (CSI) available at the transmitter, particularly in multiuser systems where the feedback from each user terminal must be limited. To this effect we propose two independent approaches for an efficient representation of the channel in multiuser MIMO systems. In the first approach, channel quantization is considered where the total number of feedback bits is limited. A resource allocation scheme is proposed where the available rate is split between the scheduling phase, where all users feed back a coarse CSI quantization, and the precoding phase where the selected receivers refine their CSI. The optimum splitting of the available feedback rate provides a large increase in performance and even simple heuristic splitting gives a noticeable advantage. In the second approach, we exploit a combination of instantaneous and statistical channel information. For spatially correlated Rayleigh and Ricean channels, it is shown that the CSI to large extent can be represented by the channel norm when the long-term channel statistics are known. Within a minimum mean square error (MMSE) estimation framework, feedback of a few bits of the quantized channel norm is sufficient to perform efficient resource allocation and achieve performance close to that of full CSI., QC 20111101

In the design of next generation multiuser communication systems, multiple antenna transmission is an essential part providing spatial multiplexing gain and allowing efficient use of resources. A major limiting factor in the resource allocation is the amount of channel state information (CSI) available at the transmitter, particularly in multiuser systems where the feedback from each user terminal must be limited. To this effect we propose two independent approaches for an efficient representation of the channel in multiuser MIMO systems. In the first approach, channel quantization is considered where the total number of feedback bits is limited. A resource allocation scheme is proposed where the available rate is split between the scheduling phase, where all users feed back a coarse CSI quantization, and the precoding phase where the selected receivers refine their CSI. The optimum splitting of the available feedback rate provides a large increase in performance and even simple heuristic splitting gives a noticeable advantage. In the second approach, we exploit a combination of instantaneous and statistical channel information. For spatially correlated Rayleigh and Ricean channels, it is shown that the CSI to large extent can be represented by the channel norm when the long-term channel statistics are known. Within a minimum mean square error (MMSE) estimation framework, feedback of a few bits of the quantized channel norm is sufficient to perform efficient resource allocation and achieve performance close to that of full CSI., QC 20111101