Search

Permanent magnet synchronous hub motors (PMSHMs) have been gradually introduced into the applications of electric vehicles. On this basis, the six-phase motor has the characteristics of high reliability, high power density and low torque ripple. And its fault tolerance is a large advantage compared with the three-phase motor. The multi-phase permanent magnet synchronous motor is redundant due to the number of phases. When the motor fails, it does not have to stop running, merely adjust its control mode and enter the fault-tolerant compensation control algorithm to resume the operation of the system. The FCS-MPC algorithm can replace the cascade structure in the traditional control and eliminate the modulation module. This makes it have good steady-state performance. The speed response is also improved. It can be combined with multiple control objectives with strong flexibility by simply changing the objective function. The prediction model is compensated. Finally, the experimental results show the effectiveness of this method. [ABSTRACT FROM AUTHOR]

This paper focus on a state feedback controller (SFC)-based optimal control scheme for surface-mounted permanent-magnet synchronous motor (SPMSM) with auto-tuning of controller built on seeker optimization algorithm (SOA). First, based on the nonlinear state-space model of SPMSM, voltage feedforward compensation is used to design a linear SFC. Then in order to guarantee the steady performance in speed and current, integral models considering the errors of rotor speed and current response in d-axis are added in the state space model of SPMSM. Furthermore, by statically decoupling the load torque in the state equation, feedforward compensation is implemented on the load torque to improve the dynamic performance of the controller. The load torque is estimated by using disturbance observer with reasonable parameter selection. Then, with the consideration of the search capacity of seeker optimization algorithm (SOA), it is adopted to acquire matrix coefficient of the presented controller. Furthermore, in order to suppress the speed overshoot, a penalty term is introduced to the fitness index. The performance of the proposed method has been validated experimentally and compared with the conventional method under different conditions. [ABSTRACT FROM AUTHOR]