Search

The key objective of the present proposed work in this paper is introduced a new version of picture fuzzy set so called spherical fuzzy sets (SFS). spherical fuzzy set is a new extension of picture fuzzy sets and Pythagorean fuzzy sets. In spherical fuzzy sets, membership degrees are gratifying the condition 0 ⩽ P2 (x) + I2 (x) + N2 (x) ⩽1 instead of 0 ⩽ P (x) + I (x) + N (x) ⩽1 as is in picture fuzzy sets. In this paper, we investigate the basic operations of spherical fuzzy sets and discuss some related results. We extend operational laws to aggregation operators and introduce weighted averaging and weighted geometric aggregation operators based on spherical fuzzy number's. Further a multi attribute decision making method is developed and these aggregation operators are utilized. Finally, we constructed a numerical approach for implementation of proposed technique. [ABSTRACT FROM AUTHOR]

In this paper, we establish the matching relation between implication operator and aggregation operator, which provides a new solution for the design and construction of multi-rule fuzzy inference system. Firstly, according to the definition and monotonicity of implication operator, a new classification method of implication operator is proposed, and then the fuzzy inference process using different implication operators is classified. Then, dynamic maximum aggregation operator and dynamic minimum aggregation operator are proposed. Based on the compositional rule of inference (CRI) method, a matching method and basis of implication operator and aggregation operator for fuzzy inference systems is given and illustrated with examples. Finally, the applicability of the proposed method in this paper is further illustrated by comparing the method with existing methods in the literature and using the nearness degree as an evaluation index. [ABSTRACT FROM AUTHOR]

As dual hesitant fuzzy sets can express the uncertainty of data efficiently, the aggregation of dual hesitant fuzzy information plays an important role in both theory and application. However, some existing dual hesitant fuzzy aggregation operators are not rigorous enough actually. In this note, we show that some theorems in an earlier paper by Ju et al. [1] (Journal of Intelligent & Fuzzy Systems 27 (2014) 2481–2495) are not correct, i.e., the dual hesitant fuzzy Hamacher weighted averaging operator (DHFHWA) and some other aggregation operators proposed by Ju et al. don't satisfy idempotency and boundedness. Therefore, the purpose of this paper is to make researchers aware of that some aggregation operators in literature [1] are flawed and limited for many applications. [ABSTRACT FROM AUTHOR]

The extensions of ordinary fuzzy sets are problematic because they require decimal numbers for membership, non-membership and indecision degrees of an element from the experts, which cannot be easily determined. This will be more difficult when three or more digits' membership degrees have to be assigned. Instead, proportional relations between the degrees of parameters of a fuzzy set extension will make it easier to determine the membership, non-membership, and indecision degrees. The objective of this paper is to present a simple but effective technique for determining these degrees with several decimal digits and to enable the expert to assign more stable values when asked at different time points. Some proportion-based models for the fuzzy sets extensions, intuitionistic fuzzy sets, Pythagorean fuzzy sets, picture fuzzy sets, and spherical fuzzy sets are proposed, including their arithmetic operations and aggregation operators. Proportional fuzzy sets require only the proportional relations between the parameters of the extensions of fuzzy sets. Their contribution is that these models will ease the use of fuzzy set extensions with the data better representing expert judgments. The imprecise definition of proportions is also incorporated into the given models. The application and comparative analyses result in that proportional fuzzy sets are easily applied to any problem and produce valid outcomes. Furthermore, proportional fuzzy sets clearly showed the role of the degree of indecision in the ranking of alternatives in binomial and trinomial fuzzy sets. In the considered car selection problem, it has been observed that there are minor changes in the ordering of intuitionistic and spherical fuzzy sets. [ABSTRACT FROM AUTHOR]

The Fuzzy-Weighted Zero-Inconsistency (FWZIC) and Fuzzy-Decision-by-Opinion-Score-Method (FDOSM) are considered the recent advance methods. FDOSM generates a ranking for possible alternatives, while FWZIC produces a weight for criterion. Keeping up with the stream of academic publications on the FDOSM and FWZIC methods is complicated. This study aims to provide a comprehensive review of the literature on the latest advanced methods of MCDM in order to reorganize the findings of the previous literature and provide decisive evidence for ongoing research and future studies. Based on previous literature, the current study used the Prisma method to collect data from multiple databases such as IEEE Xplore®, ScienceDirect, and Web of Science. There were 45 papers discovered relevant to this subject; however, only 23 studies were relevant for the FDOSM & FWZIC study. The results included theoretical and practical implications. Theoretically, additions of new aggregation operators or usage of new fuzzy sets in the FDOSM & FWZIC model to solve the uncertainty problem are the key obstacles. Practically, agriculture and architectural fields are considered to be a hotspot of research. Finally, a number of potential points for future research to develop methods with high certainty and low ambiguity are presented. [ABSTRACT FROM AUTHOR]

The picture fuzzy set (PFS) is a more frequent platform for describing the degree of positive, neutral, and negative membership functions that generalizes the concept of fuzzy sets (FSs) and intuitionistic fuzzy sets (IFSs). Neutrality is a crucial component of PFS, and the score function plays a crucial role in ranking the alternatives in decision-making situations. In the decision-making process, some researchers concentrate on the various aggregation operators' development while ignoring the development of score functions. This factor causes several errors in the existing score function. If there are two separate picture fuzzy numbers (PFNs), there should be two different scores or accuracy values. Some researchers failed to rank the alternatives when the score and accuracy values for various PFNs were equal. To overcome the shortcomings, we proposed the perfect score function in this paper for ranking PFNs and introduced strong and weak PFSs. The shortcoming of the existing score function in PFNs has been highlighted in this paper. Furthermore, the decision-making approach has been depicted based on the proposed score function, and real-world applications have been shown by ranking the COVID-19 affected regions to demonstrate its efficacy. [ABSTRACT FROM AUTHOR]

As an extension of the concepts of fuzzy set and intuitionistic fuzzy set, the concept of Pythagorean fuzzy set better models some real life problems. Distance, entropy, and similarity measures between Pythagorean fuzzy sets play important roles in decision making. In this paper, we give a new entropy measure for Pythagorean fuzzy sets via the Sugeno integral that uses fuzzy measures to model the interaction between criteria. Moreover, we provide a theoretical approach to construct a similarity measure based on entropies. Combining this theoretical approach with the proposed entropy, we define a distance measure that considers the interaction between criteria. Finally, using the proposed distance measure, we provide an extended Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) for multi-criteria decision making and apply the proposed technique to a real life problem from the literature. Finally, a comparative analysis is conducted to compare the results of this paper with those of previous studies in the literature. [ABSTRACT FROM AUTHOR]

Intuitionistic fuzzy sets aims at taking the hesitancy of an expert into account in assigning a membership degree or a non-membership degree. The direct assignment of decimal numbers for membership and non-membership degrees of an element in intuitionistic fuzzy sets is not practical. Besides, the assigned degrees are generally composed of one digit or at most two digits after dot. This problem has not been addressed as much as it deserves in the literature. The hypothesis of the paper is that the determination of proportional relationships between membership and non-membership degrees is more appropriate than the direct assignment to obtain the degrees. Proportional intuitionistic fuzzy (PIF) sets require only the proportion relations between an intuitionistic fuzzy set's parameters. The accuracy of the results obtained with multi-criteria decision-making models definitely depends on how accurately the membership degrees are determined. In this paper, we extend Combinative distance-based assessment (CODAS) method by using single-valued proportional intuitionistic fuzzy sets. We compare the proposed PIF CODAS method with ordinary fuzzy CODAS method. A cloud service provider selection problem is handled to show the validity of the proposed PIF CODAS method. Additionally, a comparative analysis and a sensitivity analysis together with a discussion are presented. [ABSTRACT FROM AUTHOR]

Intuitionistic fuzzy (IF) information aggregation in multi-criteria decision making (MCDM) is a substantial stream that has attracted significant research attention. There are various IF aggregation operators have been suggested for extracting more informative data from imprecise and redundant raw information. However, some of the aggregation techniques that are currently being applied in IF environments are non-monotonic with respect to the total order, and suffer from high computational complexity and inflexibility. It is necessary to develop some novel IF aggregation operators that can surpass these imperfections. This paper aims to construct some IF aggregation operators based on Yager's triangular norms to shed light on decision-making issues. At first, we present some novel IF operations such as Yager sum, Yager product and Yager scalar multiplication on IF sets. Based on these new operations, we propose the IF Yaeger weighted geometric operator and the IF Yaeger ordered weighted geometric operator, and prove that they are monotone with respect to the total order. Then, the focus on IF MCDM have motivated the creation of a new MCDM model that relies on suggested operators. We show the applicability and validity of the model by using it to select the most influential worldwide supplier for a manufacturing company and evaluate the most efficient method of health-care disposal. In addition, we discuss the sensitivity of the proposed operator to decision findings and criterion weights, and also analyze it in comparison with some existing aggregation operators. The final results show that the proposed operator is suitable for aggregating both IF information on "non-empty lattice" and IF data on total orders. [ABSTRACT FROM AUTHOR]

Linguistic q-rung orthpair fuzzy sets (Lq-ROFSs) can facilitate describing the uncertainty and the vagueness information existing in the real world. Based on the advantages of Lq-ROFSs, this paper innovatively puts forward a new method to solve the multi-attribute group decision-making (MAGDM) problems when the attribute weight is completely unknown, and proves the feasibility and effectiveness of this method through illustrative examples. Firstly, we propose the linguistic q-rung orthopair fuzzy generalized power average (Lq-ROFGPA) operator, which considers not only the importance of the data itself, but also the interaction between the data, and prove its properties. In particular, the linguistic q-rung orthopair fuzzy weighted generalized power average (Lq-ROFWGPA) operator takes into account the weight between data, which can better aggregate evaluation information. Then, we introduce decision making trial and evaluation laboratory (DEMATEL) method of the linguistic q-rung orthpair fuzzy numbers (Lq-ROFNs) to analyze the causal relationship and key elements of complex systems. Based on DEMATEL method, we further develop a weight model to calculate the attribute weights, which can make up for the deficiency which is the influence of the interaction between attributes that the existing weight determination method for Lq-ROFNs does not consider. Finally, we present a new MAGDM method based on the Lq-ROFWGPA operator and DEMATEL method. Further, several practical examples are given to illustrate the effectiveness and superiority of this new method in comparison with other existing MAGDM methods. [ABSTRACT FROM AUTHOR]

Consolidating cubical fuzzy numbers (CFNs) is essential in an uncertain decision-making process. This study focuses on creating innovative cubical fuzzy aggregation operators based on the newly proposed Einstein operational laws, utilizing the Bonferroni mean function to capture the interrelationships among the aggregated CFNs. The first contribution of this paper is introducing a novel cubical fuzzy Einstein Bonferroni mean averaging operator. Building upon this operator, we extend our research to develop cubical fuzzy Einstein Bonferroni mean weighted, ordered weighted, and hybrid averaging operators, taking into account the weights of the aggregated CFNs. To ensure their effectiveness, we thoroughly investigate the desirable properties of these proposed operators. Furthermore, we leverage the introduced operators to establish a new approach known as the cubical fuzzy linear assignment method, which proves valuable in resolving multiple criteria group decision-making problems. As a practical demonstration of the method's utility, we apply it to address a real-life challenge: identifying the optimal location for constructing a wind power plant under a cubical fuzzy environment. To validate the effectiveness of our approach, we compare its results with those obtained using existing methods from the literature. Additionally, we conduct a statistical analysis to visualize the correlative conjunction between the ranking outcomes obtained by different operators [ABSTRACT FROM AUTHOR]

One of the hottest areas for applying the solutions currently available is the internet of things-based smart housing society architecture and its uncertainty analysis. When intelligent parking, waste management, public transportation, public safety, and other automatic methods for housing society's growth were implemented, it became even more crucial. An intelligent, smart system is necessary to manage these problems and provide smooth services. Additionally, it will be helpful in reducing issues with time waste and societal safety. However, the issue comes up when describing accurate, approximate, or questionable parking, transit, safety, and waste management areas. This paper discusses several mathematical solutions for the smart housing society that use fuzzy rough sets, probabilistic hesitant fuzzy sets, and their extensions with neutrosophic sets. For further growth, a few studies on the graphic display of the evolution of the smart housing society are also considered. The rough set theory can be useful when dealing with imprecise, incomplete, or indeterminate data sets. The core contribution of this work is the construction of a novel generalized notion of a single-valued neutrosophic probabilistic hesitant fuzzy rough set (SV-NPHFRS), which is a hybrid structure of the single-valued neutrosophic set, the probabilistic hesitant fuzzy set, and the rough set. In contrast to the present literature, the underlying idea of SV-NPHFRS is that it is a powerful mathematical tool for managing uncertainty and imperfect information. This method is particularly beneficial when there are a number of competing criteria to consider. The aggregation technique plays an important role in decision-making concerns, especially when more competing criteria are present. In the study's comparison phase, the suggested decision support system is compared to relevant existing approaches. The results suggest that, in terms of choice flexibility, the suggested technique has the potential to outperform the drawbacks of the current decision-making tools. The proposed study is expected to be useful for a number of researchers conducting future work on housing societies, waste management, public safety diagnostics, and hybridization. [ABSTRACT FROM AUTHOR]

Corporate culture is the sum of corporate values, systems, and behavioral norms formed in the long-term survival and development of an enterprise. It is the long-term accumulation of consensus among all employees in the enterprise. In the context of today's global economic integration trend, the role of corporate culture construction in promoting enterprise development, improving business performance, and enhancing internal cohesion and external competitiveness is becoming increasingly significant. How to strengthen the construction of corporate culture and establish excellent corporate culture is increasingly receiving widespread attention from the academic and business communities. The comprehensive evaluation of corporate cultural competitiveness is regarded as multi-attribute decision-making (MADM). The 2TLNSs are employed as a useful tool for characterizing uncertain information during the comprehensive evaluation of corporate cultural competitiveness. In this paper, the dual Hamy mean (DHM) and the power average (PA) are connected with 2-tuple linguistic neutrosophic sets (2TLNSs) to propose the 2-tuple linguistic neutrosophic numbers power weighted DHM (2TLNPWDHM) operator. Then, use the 2TLNPWDHM operator to handle MADM with 2TLNS. Finally, taking the comprehensive evaluation of corporate cultural competitiveness as an example, the proposed method is explained. The main contributions of this study are summarized: the establishment of the 2TLNPWDHM operator; (2) The 2TLNPWDHM operator was developed to handle MADM with 2TLNS; (3) Through the empirical application of the comprehensive evaluation of corporate cultural competitiveness, the proposed method is validated; (4) Some comparative studies have shown the rationality of the 2TLNPWDHM operator. [ABSTRACT FROM AUTHOR]

Product-service system (PSS) has attracted attention of manufacturers to shift from product-providing to solution-providing, which is a marketable set of products and services. The existing researches emphasize the fulfillment of individualized customer requirements through different PSS configurations. The PSS planning phase is of high importance in generating conceptual schemes, which translates customer requirements (CRs) to design requirements (DRs). In this paper, a systematic decision-making approach based on QFD is put forward aiming to configure the PSS design requirements (DRs). To address the uncertainty and hesitancy in QFD modeling, a hesitant fuzzy linguistic term sets (HFLTSs) is applied to elicit the experts' linguistic preferences in evaluating the importance of CRs and the relationships between CRs and DRs. To dealing with the group decision-making problems concerning the HFLTSs, the min-upper operator and the max-lower operator assemble the experts' evaluation results into a linguistic interval, and then the numerical results can be obtained by using the 2-tuple linguistic representation model and the interval preference degree computation. A non-linear 0-1 programming model is proposed to select the target DRs' specifications for maximizing customer satisfaction under cost constraint. In order to objectively determine the satisfaction degree of each optional specification of DR, the information axiom is introduced to construct the objective function via information content computation. To deal with the qualitative DRs, HFLTSs and information axiom are combined and hesitant information axiom (HIA) is proposed. Finally, a DRs optimization model is established using HIA and the imprecision method. A case study is carried out to demonstrate the effectiveness of the optimal PSS planning approach developed. [ABSTRACT FROM AUTHOR]

Probabilistic interval-valued intuitionistic hesitant fuzzy sets (PIVIHFSs) can well describe the evaluation information of decision-makers (DMs) in multi-attribute decision-making (MADM) problems. However, PIVIHFSs only depict the situation where both membership and non-membership information occur with equal probability while ignoring the situations of non-equal possibility due to DMs' subjective preferences. In this paper, we develop dual probabilistic interval-valued intuitionistic hesitant fuzzy sets (DPIVIHFSs) concept based on the truncated normal distribution. The DPIVIHFSs overcome the shortcomings of PIVIHFSs and are more interpretable. Then, the operations and ranking method of DPIVIHFSs are introduced. Furthermore, we study MADM methods in dual probabilistic interval-valued intuitionistic hesitant fuzzy environments by aggregation operators (AOs). We propose a series of AOs including the DPIVIHF heronian mean (DPIVIHFHM) operator and the DPIVIHF weighted heronian mean (DPIVIHFWHM) operator. The basic properties of the presented are discussed and proved. Finally, a novel method for solving the MADM problem is proposed based on the DPIVIHFWHM operator and a numerical example of express company selection strategy is used to illustrate the effectiveness of the method. The proposed method in this article can capture more fuzzy and uncertain information when solving MADM problems and have a wider application range. [ABSTRACT FROM AUTHOR]

The aim of the paper is to introduce some complex Einstein aggregation operators for aggregating the different complex Pythagorean fuzzy sets (CPFSs) by considering the dependency between the pairs of its membership degrees. In the existing studies of fuzzy and its extensions, the uncertainties present in the data are handled with the help of degrees of membership that are the subset of real numbers, which may also loss some valuable data and hence consequently affect the decision results. A modification to these, complex Pythagorean fuzzy set handles the uncertainties with the degree whose ranges are extended from real subset to the complex subset with unit disc and hence handle the two dimensional information in a single set. Thus motivated by this and this paper we present some novel Einstein aggregation operators, namely complex Pythagorean fuzzy Einstein weighted averaging (CPFEWA) operator, complex Pythagorean fuzzy Einstein ordered weighted averaging (CPFEOWA) operator, complex Pythagorean fuzzy Einstein hybrid averaging (CPFEHA) operator, induced complex Pythagorean fuzzy Einstein ordered weighted averaging (I-CPFEOWA) operator, and induced complex Pythagorean fuzzy Einstein hybrid averaging (I-CPFEHA) operator. Also develop some of their desirable properties. Furthermore, based on these operators a multi-attribute group decision making problems developed. An illustrative example related to the selection of the best alternative is considered to show the effectiveness, of the novel developed methods. [ABSTRACT FROM AUTHOR]

This paper aims to put forward a hesitant fuzzy multi-attribute group decision making (MAGDM) method based on the weighted power aggregation operators in social network. From the point of view of social network analysis, decision makers (DMs) are interconnected in the process of MAGDM. Furthermore, the dimension of the obtained hesitant fuzzy element (HFE) by original power operators will be greater with the increasing number of attributes and alternatives and DMs, which will lead to the problem of "intermediate expression swell". This paper combines the order operation laws with the power operators to redefine two novel hesitant fuzzy power aggregation operators to simplify the involved calculation and explore new operators' properties. Meanwhile, when two given elements have different number of values, we use the strength of social ties and social influence to develop an algorithm for extending the HFEs objectively. On the other hand, the PageRank algorithm and the deviation method are used to determine DMs' combined weights. The feasibility of the proposed hesitant fuzzy MAGDM method based on social network is illustrated by the application to the actual issue of decision making and the comparative analysis with the existing method. [ABSTRACT FROM AUTHOR]

In this paper, we introduce the concept of circular Pythagorean fuzzy set (value) (C-PFS(V)) as a new generalization of both circular intuitionistic fuzzy sets (C-IFSs) proposed by Atannassov and Pythagorean fuzzy sets (PFSs) proposed by Yager. A circular Pythagorean fuzzy set is represented by a circle that represents the membership degree and the non-membership degree and whose centre consists of non-negative real numbers μ and ν with the condition μ 2 + ν 2 ⩽ 1. A C-PFS models the fuzziness of the uncertain information more properly thanks to its structure that allows modelling the information with points of a circle of a certain centre and a radius. Therefore, a C-PFS lets decision makers to evaluate objects in a larger and more flexible region and thus more sensitive decisions can be made. After defining the concept of C-PFS we define some fundamental set operations between C-PFSs and propose some algebraic operations between C-PFVs via general triangular norms and triangular conorms. By utilizing these algebraic operations, we introduce some weighted aggregation operators to transform input values represented by C-PFVs to a single output value. Then to determine the degree of similarity between C-PFVs we define a cosine similarity measure based on radius. Furthermore, we develop a method to transform a collection of Pythagorean fuzzy values to a C-PFS. Finally, a method is given to solve multi-criteria decision making problems in circular Pythagorean fuzzy environment and the proposed method is practiced to a problem about selecting the best photovoltaic cell from the literature. We also study the comparison analysis and time complexity of the proposed method. [ABSTRACT FROM AUTHOR]

In comparison to intuitionistic fuzzy set (IFS) and Pythagorean fuzzy set (PFS), the Fermatean Fuzzy Set (FFS) is more efficacious in dealing ambiguous and imprecise data when making decisions. In this paper, we propose unique operations on Fermatean fuzzy information based on prioritized attributes, as well as Einstein's operations based on adjusting the priority of characteristics in the Fermatean fuzzy environment. We use Einstein's operations with prioritized attributes to propose new operations on Fermatean fuzzy numbers (FFNs), and then introduce basic aspects of these operations. Motivated by Einstein operations on FFNs, we develop Fermatean fuzzy Einstein prioritized arithmetic and geometric aggregation operators (AOs). In the first place, the concepts of a Fermatean fuzzy Einstein prioritized average (FFEPA), Fermatean fuzzy Einstein prioritized weighted average (FFEPWA), and Fermatean fuzzy Einstein prioritized ordered weighted average (FFEPOWA)-operators are introduced. Then, Fermatean fuzzy Einstein prioritized geometric (FFEPG) operator, Fermatean fuzzy Einstein prioritized weighted geometric (FFEPWG) operator, Fermatean fuzzy Einstein prioritized ordered weighted geometric (FFEPOWG) operator, and Fermatean fuzzy Einstein hybrid geometric (FFEHG) operator are given. We also go through some of the key characteristics of these operators. Moreover, using these operators, we establish algorithm for addressing a multiple attribute decision-making issue using Fermatean fuzzy data and attribute prioritizing. The case of university faculty selection is taken as a scenario to analyze and demonstrate the applicability of our suggested model. In addition, a comparison of the proposed and current operators is conducted, and the impact of attribute priority on the ranking order of alternatives is explored. [ABSTRACT FROM AUTHOR]

To improve the accuracy of decision results in complex fuzzy environments, complex cubic fuzzy sets are studied, which can not only measure the periodicity of decision-making data, but also use interval values and single values to act together on the data. However, the fuzzy sets do not provide a reasonable explanation for some special cases of input arguments. Thus, the power average operator is used to eliminate the influence of extreme input arguments on decision results, and the Maclaurin symmetric mean operator considers the correlation between inputs in this paper. Firstly, we define the operation rules, distance measures, evaluation index function, and evaluation criteria in a complex cubic q-rung orthopair fuzzy environment. Then, some aggregation operators are proposed to aggregate complex cubic q-rung orthopair fuzzy numbers, and their desirable properties and some special cases are discussed. Next, we use the subjective and objective fusion method to determine the weight of attributes. Further, a multi-attribute decision-making method is established by combining aggregation operator, evaluation function, and weight determination method. Finally, the proposed method is applied to a specific quality evaluation problem, and the effectiveness and practicability of the proposed method are illustrated by other methods and parameter analysis. [ABSTRACT FROM AUTHOR]

A decision matrix is typically used to express hesitant information when solving multi-attribute decision problems in an uncertain environment. To further investigate the decision problem, this paper takes the property of matrix rank as the starting point, introduces it into the hesitant fuzzy theory, presents the concept of the rank of the hesitant fuzzy decision matrix and discusses the related properties, and then studies the hesitant fuzzy linear relation, obtaining the attribute reduction method based on the hesitant fuzzy linear relation and applying it to the multi-attribute decision making. It adds to the theoretical understanding of the hesitant fuzzy decision matrix. The aggregation operator first transforms the hesitant fuzzy information into a comprehensive decision matrix, and the row echelon transformation determines the rank of the matrix. Second, the hesitant fuzzy linear relationship is obtained using the rank property. A new hesitant fuzzy matrix is obtained after attribute reduction based on the hesitant fuzzy linear relationship, and the alternatives are sorted using the TOPSIS method. Finally, the effectiveness and superiority of the proposed method are demonstrated through a comparison of actual case analysis and existing methods, and the expected research purpose is met. [ABSTRACT FROM AUTHOR]

This paper proposes a new multi-criteria group decision-making (MCGDM) method utilizing q-rung orthopair fuzzy (qROF) sets, improved power weighted operators and improved power weighted Maclaurin symmetric mean (MSM) operators. The power weighted averaging operator and power weighted Maclaurin symmetric mean (MSM) operator used in the existing MCGDM methods have the drawback of being unable to distinguish the priority order of alternatives in some scenarios, especially when one of the qROF numbers being considered has a non-belongingness grade of 0 or a belongingness grade of 1. To address this limitation of existing MCGDM methods, four operators, namely qROF improved power weighted averaging (qROFIPWA), qROF improved power weighted geometric (qROFIPWG), qROF improved power weighted averaging MSM (qROFIPWAMSM) and qROF improved power weighted geometric MSM (qROFIPWGMSM), are proposed in this paper. These operators mitigate the effects of erroneous assessment of information from some biased decision-makers, making the decision-making process more reliable. Following that, a group decision-making methodology is developed that is capable of generating a reasonable ranking order of alternatives when one of the qROF numbers considered has a non-belongingness grade of 0 or a belongingness grade of 1. To investigate the applicability of the proposed approach, a case study is also presented and a comparison-based investigation is used to demonstrate the superiority of the approach. [ABSTRACT FROM AUTHOR]

In view of the present situation that most aggregation methods of fuzzy preference information are extended or mixed by classical aggregation operators, which leads to the aggregation accuracy is not high. The purpose of this paper is to develop a novel method for spatial aggregation of fuzzy preference information. Thus we map the fuzzy preference information to a set of three-dimensional coordinate and construct the spatial aggregation model based on Steiner-Weber point. Then, the plant growth simulation algorithm (PGSA) algorithm is used to find the spatial aggregation point. According to the comparison and analysis of the numerical example, the aggregation matrix established by our method is closer to the group preference matrices. Therefore, the optimal aggregation point obtained by using the optimal aggregation method based on spatial Steiner-Weber point can best represent the comprehensive opinion of the decision makers. [ABSTRACT FROM AUTHOR]

Both Heronian mean (HM) operators and Bonferroni mean (BM) operators can capture the interrelationship between input arguments and have been a hot research topic as a useful aggregation technique in fuzzy and intuitionistic fuzzy environments. In this paper, associated with the common characters of these operators we propose the covering-based compound mean operators in fuzzy environments to capture various interrelationships between input arguments, some desirable properties and special cases of the proposed mean operators are provided. Then, conditions under which these covering-based compound mean operators can be directly used to aggregate the membership degrees and nonmembership degrees of intuitionistic fuzzy information, are provided. In particular, novel intuitionistic fuzzy HM operators and intuitionistic fuzzy BM operators are directly derived from the classical ones. We list the detailed steps of multiple attribute decision making with the developed aggregation operators, and give a comparison of the new extensions of BM operators by this paper with the corresponding existing ones to prove the rationality and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

With the rapid development of the construction industry, people's requirements for the construction quality continue to improve, and the supervision and management of the construction project quality has been paid more and more attention. The perfect quality supervision and management system is not only an important guarantee for the whole construction project implementation process, but also provides support for the smooth implementation of the construction project. With the increasing number of high-rise buildings in cities and the increasing difficulty of construction, it has posed great challenges to the construction industry, which also means that the quality supervision and management of construction projects are facing new challenges. Therefore, the project quality supervision and management department should review the situation, optimize the quality supervision and management work according to the current situation and needs of the construction project development, effectively improve the system guarantee and content optimization, maximize the role of quality supervision and management, and provide assistance for the high-quality and sustainable development of the construction industry. The quality evaluation of construction project is a classical multiple attribute group decision making (MAGDM). In this paper, we extended multi-attributive border approximation area comparison (MABAC) method for MAGDM with Pythagorean 2-tuple linguistic sets (P2TLSs). Firstly, a brief review of the definition of P2TLSs is given. Next, two aggregation operators of P2TLSs are used to fuse overall evaluation information. Moreover, combining traditional MABAC model with P2TLSs, Pythagorean 2-tuple linguistic number MABAC (P2TLN-MABAC) is built with all computing steps depicted in detail. Furthermore, a numerical example related to quality evaluation of construction project is conducted to demonstrate the effectiveness of the proposed method. Finally, some comparisons with P2TLWA and P2TLWG operators are also carried out. [ABSTRACT FROM AUTHOR]

Picture fuzzy sets (PFSs), the generalization of intuitionistic fuzzy sets (IFSs), are more capable of dealing with vague data in real-life problems. Models based on PFSs may be suitable particularly in those circumstances where human perceptions become challenging as well as various kinds of reasoning, like yes, no, abstention, or denial. The aggregation operators (AOs) are essential components in information aggregation as they have the ability to aggregate a group of fuzzy numbers into a single fuzzy number of the same kind. A lot of aggregation operations for PFSs have been developed. Nevertheless, the existing aggregation operators for picture fuzzy information are inaccurate as they fail to aggregate a group of picture fuzzy numbers into a single picture fuzzy number (PFN). To cover the drawbacks of existing AOs, we developed some modified picture fuzzy aggregation operators (PFAOs) named as picture fuzzy modified weighted averaging (PFMWA), picture fuzzy modified ordered weighted averaging (PFMOWA) and picture fuzzy modified hybrid averaging (PFMHA) aggregation operator along with their distinctive features. These operators are essential in developing new multi-criteria decision-making (MCDM) techniques. This paper defines a number of stakeholder roles (or tactics), with an objective of overcoming the challenges to executing Education 4.0 (EDUC4) that have recently been highlighted in the literature. A MCDM problem provides the basis for the evaluation of the responsibilities of the stakeholders with respect to these constraints. Several management concerns are provided as stepping stones for the development of EDUC4 implementation. The purpose of this study is to identify the qualities that influence the degree of optimism for the adoption and implementation of the EDUC4 in Pakistan's education system while taking government policies into account. [ABSTRACT FROM AUTHOR]

Teaching quality is the foundation and lifeline of colleges and universities. To establish a distinctive university, we must adhere to the scientific concept of development, deepen teaching reform and improve teaching quality. The classroom teaching quality (CTQ) evaluation of college physical education (PE) is an essential part of the teaching process. Building a scientific, comprehensive, reasonable and effective evaluation system is crucial to improve the quality of college PE classroom teaching. This process is not easy and needs long-term efforts and persistence. The CTQ evaluation of college volleyball training is viewed as the multi-attribute decision-making (MADM). In this paper, we connect the geometric Heronian mean (GHM) operator and power geometric (PG) operator with 2-tuple linguistic neutrosophic sets (2TLNSs) to build the generalized 2-tuple linguistic neutrosophic numbers weighted power GHM (G2TLNWPGHM) operator. Then, the G2TLNWPGHM operator is used to tackle MADM with 2TLNSs. Finally, an example for CTQ evaluation of college volleyball training is used to show the proposed methods. [ABSTRACT FROM AUTHOR]

There are various uncertainties in the multi-criteria group decision making (MCGDM) process, including the definition of the importance of decision information and the assignment of criterion assessment values, etc., which cause decision makers to be unconfident in their decisions. In this paper, an MCGDM approach based on the reliability of decision information is proposed in Fermatean fuzzy (FF) environment, allowing a decision to be made with confidence that the alternative chosen is the best performing alternative under the range of probable circumstances. First, we prove that the FF Yager weighted averaging operator is monotone with respect to the total order and note the inconsistency between the monotonicity of some FF aggregation operators and their application in MCGDM. Second, we extend the divergence measure of FFS to order σ for calculating the variance of decision information and accordingly develop an exponential FF entropy measure to measure the uncertainty of decision information. Then, the reliability of decision information is defined, which accounts for the degree of variance of decision information across criteria from the criterion dimension and the uncertainty of the decision information from the alternative dimension. Following that, an integrated MCGDM framework is completed. Finally, the applications to a numerical example and comparisons with previous approaches are conducted to illustrate the validity of the established approach. [ABSTRACT FROM AUTHOR]

Accumulation of q ˜ -rung picture fuzzy information plays an essential part in decision-making situations. q ˜ -rung picture fuzzy sets can handle the uncertain information more precisely and flexibly because of the presence of parameter q ˜. Also the Frank t-norm and t-conorm operations perform suitably for the data accumulation with the operational parameter. In this paper, we introduce q ˜ -Rung picture fuzzy Frank weighted averaging operator and q ˜ -rung picture fuzzy Frank weighted geometric operator by extending q ˜ -rung orthopair fuzzy Frank arithmetic and geometric aggregation operators respectively. We establish an algorithm to address the tedious decision-making problems using these operators. Eventually, we discuss a multiple attribute decision-making problem to demonstrate the utility and efficacy of the proposed method. A comparison of existing methods is made to reveal the supremacy and benefits of our proposed method. [ABSTRACT FROM AUTHOR]

Business English teaching quality evaluation Business English is a new type of composite specialty, which is a discipline innovation made by China's higher education to adapt to the new market demand and international standards since the reform and opening up. Over the past 20 years, it has cultivated a number of compound talents for the cause of China's reform and opening up. However, the backwardness of business English theoretical research has greatly restricted the development of business English. At present, Business English has been officially approved as a new major for undergraduate enrollment by the Ministry of Education of the People's Republic of China. Its subject nature, specialty structure, training objectives, and specialty compound characteristics need to be qualitatively studied theoretically. The business English teaching quality evaluation is viewed as the multiple attribute decision making (MADM) issue. In this paper, we connect the geometric Heronian mean (GHM) operator and power geometric (PG) with 2-tuple linguistic neutrosophic numbers (2TLNNs) to propose the generalized 2-tuple linguistic neutrosophic power geometric HM (G2TLNPGHM) operator. Then, the G2TLNGHM operator is applied to deal with the MADM problems under 2TLNNs. Finally, an example for business English teaching quality evaluation is used to show the proposed methods. Some comparative analysis and parameter influence analysis are fully given. The results show that the built algorithms method is useful for business English teaching quality evaluation. [ABSTRACT FROM AUTHOR]

This article is a preliminary draft for initiating and commencing a new pioneer dimension of expression. To deal with higher-dimensional data or information flowing in this modern era of information technology and artificial intelligence, some innovative super algebraic structures are essential to be formulated. In this paper, we have introduced such matrices that have multiple layers and clusters of layers to portray multi-dimensional data or massively dispersed information of the plithogenic universe made up of numerous subjects their attributes, and sub-attributes. For grasping that field of parallel information, events, and realities flowing from the micro to the macro level of universes, we have constructed hypersoft and hyper-super-soft matrices in a Plithogenic Fuzzy environment. These Matrices classify the non-physical attributes by accumulating the physical subjects and further sort the physical subjects by accumulating their non-physical attributes. We presented them as Plithogenic Attributive Subjectively Whole Hyper-Super-Soft-Matrix (PASWHSS-Matrix) and Plithogenic Subjective Attributively Whole-Hyper-Super-Soft-Matrix (PSAWHSS-Matrix). Several types of views and level-layers of these matrices are described. In addition, some local aggregation operators for Plithogenic Fuzzy Hypersoft Set (PPFHS-Set) are developed. Finally, few applications of these matrices and operators are used as numerical examples of COVID-19 data structures. [ABSTRACT FROM AUTHOR]

The recently proposed q-rung orthopair fuzzy set (q-ROFS) whose main feature is that the qth power of membership degree (MD) and the qth power of non-membership degree (NMD) is equal to or less than 1, is a powerful tool to describe uncertainty. The major contribution of this paper lies to investigate power point average (PPA) aggregation operators with q-rung orthopair fuzzy information based on Frank t-conorm and t-norm. Since the existing power average (PA) operators all rely on the traditional distance measures to measure support degree between the input values, it cannot reflect decision makers' attitude. In response, this paper introduces firstly a series of distance measures for q-rung orthopair fuzzy numbers (q-ROFNs) based on point operators, from which the corresponding support measures can be obtained. Secondly, based on the proposed point distance measures, new Frank power point average aggregation operators are proposed to aggregate q-rung orthopair fuzzy information. Finally, a novel multiple attribute decision making (MADM) technique is presented based on the proposed Frank power point average aggregation operators. The developed MADM method not only can get more objective information, but also avoid the influence of unduly high or low attribute values on the decision result, providing a new way for decision makers (DMs) under q-rung orthopair fuzzy environment. [ABSTRACT FROM AUTHOR]

A cubic bipolar fuzzy set (CBFS) is a new approach in computational intelligence and decision-making under uncertainty. This model is the generalization of bipolar fuzzy sets to deal with two-sided contrasting features which can describe the information with a bipolar fuzzy number and an interval-valued bipolar fuzzy number simultaneously. In this paper, the Dombi's operations are analyzed for information aggregation of cubic bipolar fuzzy numbers (CBFNs). The Dombi's operations carry the advantage of more pliability and reliability due to the existence of their operational parameters. Owing to the pliable nature of Dombi's operators, this research work introduces new aggregation operators named as cubic bipolar fuzzy Dombi weighted averaging (CBFDWA) operator and cubic bipolar fuzzy Dombi ordered weighted averaging (CBFDOWA) operator with ℙ -order and ℝ -order, respectively. Additionally, this paper presents some significant characteristics of suggested operators including, idempotency, boundedness and monotonicity. Moreover, a robust multi-criteria decision making (MCDM) technique is developed by using ℙ -CBFDWA and ℝ -CBFDWA operators. Based on the suggested operators a practical application is demonstrated towards MCDM under uncertainty. The comparison analysis of suggested Dombi's operators with existing operators is also given to discuss the rationality, efficiency and applicability of these operators. [ABSTRACT FROM AUTHOR]

The traditional Ordered Weighting Average (OWA) operator is suitable for aggregating numerical attributes. However, this method fails when the attribute values are given in a linguistic form. In this paper, a novel aggregating method named Entropy and Probability based Fuzzy Induced Ordered Weighted Averaging (EPFIOWA) is proposed for Gaussian-fuzzy-number-based linguistic attributes. A method is first designed to obtain a reasonable weighting vector based on probability distribution and maximal entropy. Such optimal weighting vectors can be obtained under any given level of optimism, and the symmetric properties of the proposed model are proven. The linguistic attributes of EPFIOWA are represented by Gaussian fuzzy numbers because of their concise form and good operational properties. In particular, the arithmetic operations and distance measures of Gaussian fuzzy numbers required by EPFIOWA are given systematically. A novel method to obtain the order-inducing variables of linguistic attribute values is proposed in the EPFIOWA operators by calculating the distances between any Gaussian fuzzy number and a set of ordered grades. Finally, two numerical examples are used to illustrate the proposed approach, with evaluation results consistent with the observed situation. [ABSTRACT FROM AUTHOR]

Heronian mean (HM) operators, which can capture the interrelationship between input arguments with the same importance, have been a hot research topic as a useful aggregation technique. In this paper, we propose the generalized normalized cross weighted HM operators on the unit interval which can not only capture the interrelationships between input arguments but also aggregate them with different weights, some desirable properties are derived. Then, generalized cross weighted HM operators are extended to real number set and applied to binary classification. We list the detailed steps of binary classification with the developed aggregation operators, and give a comparison of the proposed method with the existing ones using the Iris dataset with 5-fold cross-validation (5-f cv), the accuracy of the proposed method for the training sets and the testing sets are both 100%. [ABSTRACT FROM AUTHOR]

The 3D extensions of ordinary fuzzy sets such as intuitionistic fuzzy sets (IFS), Pythagorean fuzzy sets (PFS), and neutrosophic sets (NS) aim to describe experts' judgments more informatively and explicitly. In this paper, generalized three dimensional spherical fuzzy sets are presented with their arithmetic, aggregation, and defuzzification operations. Weighted Aggregated Sum Product A Ssessment (WASPAS) is a combination of two well-known multi-criteria decisionmaking (MCDM) methods, which are weighted sum model (WSM) and weighted product model (WPM). The aim of this paper is to extend traditionalWASPASmethod to spherical fuzzy WASPAS (SF-WASPAS) method and to show its application with an industrial robot selection problem. Additionally, we present comparative and sensitivity analyses to show the validity and robustness of the given decisions. [ABSTRACT FROM AUTHOR]

Uncertainty has long been explored as an objective and inalienable reality, and then modeled via different theories such as probability theory, fuzzy sets (FSs) theory, vague sets, etc. Hesitant fuzzy sets (HFSs) as a generalization of FSs, because of their flexibility and capability, extended and applied in many practical problems very soon. However, the above theories cannot meet all the scientific needs of researchers. For example, in some decision-making problems we encounter predetermined definite data, which have inductive uncertainties. In other words, the numbers themselves are crisp in nature, but are associated with varying degrees of satisfaction or fairness from the perspective of each decision-maker/judge. To this end, in this article, hesitant fuzzy numbers as a generalization of hesitant fuzzy sets will be introduced. Some concepts such as the operation laws, the arithmetic operations, the score function, the variance of hesitant fuzzy numbers, and a way to compare hesitant fuzzy numbers will be proposed. Mean-based aggregation operators of hesitant fuzzy numbers, i.e. hesitant fuzzy weighted arithmetic averaging (HWAA), hesitant fuzzy weighted geometric averaging (HWGA), hesitant fuzzy ordered weighted arithmetic averaging (HOWAA), and hesitant fuzzy ordered weighted geometric averaging (HOWGA) operators have been discussed in this paper, too. These new concepts will be used to model, and solve an uncertain multi-attribute group decision making (MAGDM) problem. The proposed method will be illustrated by a numerical example and the validity of the obtained solution will be checked by test criteria. [ABSTRACT FROM AUTHOR]

This paper aims to present Bipolar valued probabilistic hesitant fuzzy sets (BVPHFSs) by combining bipolar fuzzy sets and probabilistic hesitant fuzzy sets (PHFSs). PHFSs are a strong version of hesitant fuzzy sets (HFSs) in terms of evaluated as probabilistic of each element. Probabilistic hesitant fuzzy sets (PHFSs) are a set structure that argues that each alternative should be evaluated probabilistically. In this framework, the proposed cluster allows probabilistic evaluation of decision- makers' opinions as negative. Thus, this case proposes flexibility about selection of an element and aids to overcome with noise channels. Furthermore, some new aggregation operators are discussed called bipolar valued probabilistic hesitant fuzzy weighted average operator (BVPHFWA), Generalized bipolar valued probabilistic hesitant fuzzy weighted average operator (GBVPHFWA), bipolar valued probabilistic hesitant fuzzy weighted geometric operator (BVPHFWG), Generalized bipolar valued probabilistic hesitant fuzzy weighted geometric operator (GBVPHFWG), bipolar valued probabilistic hesitant fuzzy hybrid weighted arithmetic and geometric operator (BVPHFHWAG) and Generalized bipolar valued probabilistic hesitant fuzzy hybrid weighted arithmetic and geometric (GBVPHFHWAG) and some basic properties are presented. A score function is defined ranking alternatives. Moreover, two different algorithms are put forward with helping to TOPSIS method and by using aggregation operators over BVPHFSs. The validity of proposed operators are analyzed with an example and results are compared in their own. [ABSTRACT FROM AUTHOR]

A Single-valued neutrosophic set (SVNS) has recently been explored as a comprehensive tool to assess uncertain information due to varied human cognition. This notion stretches the domain of application of the classical fuzzy set and its extended versions. Various comparison measures based on SVNSs like distance measure, similarity measure, and, divergence measure have practical significance in the study of clustering analysis, pattern recognition, machine learning, and computer vision-related problems. Existing measures have some drawbacks in terms of precision and exclusion of information and produce unreasonable results in categorization problems. In this paper, we propose a generic method to define new divergence measures based on common aggregation operators and discuss some algebraic properties of the proposed divergence measures. To further appreciate the proposed divergence measures, their application to pattern recognition has been investigated in conjunction with the prominent existing comparison measures based on SVNSs. The comparative assessment sensitivity analysis of the proposed measures establishes their edge over the existing ones because of appropriate classification results. [ABSTRACT FROM AUTHOR]

In this paper, a two-sided matching decision model based on interval-valued intuitionistic fuzzy environment is proposed to maximize the demand of individual differences. Firstly, the attribute feature table and weight matrix of both agents are constructed, and a formula for calculating the comprehensive advantage in the interval-valued intuitionistic fuzzy environment is given, namely the interval-valued intuitionistic fuzzy comprehensive advantage aggregation operator (IIFCAAO); Secondly, the interval-valued intuitionistic fuzzy decision matrix of both agents is calculated by using the comprehensive advantage aggregation operator, and the interval-valued intuitionistic fuzzy decision matrix is transformed into a score function matrix by using a score function formula; Thirdly, the two-sided matching model is established to maximize the score; Finally, the scientificity and practicability of the model are verified by an example of college students changing their majors. [ABSTRACT FROM AUTHOR]

The geometric-arithmetic mean inequality is undoubtedly the most important one in the area of information aggregation. Recently, some q-rung orthopair fuzzy aggregation operators were proposed based on the Hamacher operations. In this paper, we give a detailed theoretical and practical analysis of the developed Hamacher arithmetic and geometric operators for q-rung orthopair fuzzy values. First, we investigate the monotonicity of these Hamacher aggregation operators on q-rung orthopair fuzzy values with respect to the parameter within Hamacher operations. Then, we discuss the limiting cases of these q-rung orthopair fuzzy Hamacher aggregation operators as the parameter therein approaches to zero or infinity and give a new characterization of the boundedness of these aggregation operators. Subsequently, we establish the geometric-arithmetic mean inequality for q-rung orthopair fuzzy information based on Hamacher operations. Finally, we present a decision making method by use of these aggregation operators and apply it to the problem of enterprise resource planning system selection. [ABSTRACT FROM AUTHOR]

Relevancy transformation operators (RET operators) have been widely used in fuzzy systems modelling and the construction of weighted aggregation functions. Several construction methods of RET operators based on different aggregation functions such as t-norm, t-conorm and copula, have been proposed. In this paper, the attention is paid to the expression of RET operators, which is an important feature from an application the point of view. Polynomial RET operators are introduced as those RET operators in the form of polynomial functions of two variables. A complete characterisation of polynomial RET operators of degree less than 4 are presented. [ABSTRACT FROM AUTHOR]

In daily life, the decision making problem is a complicated work related to uncertainties and vagueness. To overcome this vagueness and uncertainties, many fuzzy sets and theories have been presented by different scholars and researchers. EDAS (Evaluation based on distance from average solution) method plays a major role in decision-making problems. Especially, when multi-attribute group decision-making (MAGDM) problems have more conflicting attribute. In this paper, a new approach known as Spherical fuzzy rough-EDAS (SFR-EDAS) method is used to handle these uncertainties in the MAGDM problem. The aggregation operators have the ability to combine different sources of information, which plays an essential role in decision making (DM) problem. Keeping in view the increasing complexity of the DM problem, it will be useful to combine the aggregation operators with the fuzzy sets in solving DM problem. Therefore, an aggregation operator known as SFR-EDAS method is utilized. For this propounded some new averaging and geometric aggregation is investigated. Moreover, the essential and desirable properties with some particular cases are deliberated and discussed detail. To evaluate the emergency program, a MAGDM approach is used based on the new introduced operators. Later on, the viability and applicability the proposed method is certified by a detailed analysis with the other existing approaches. [ABSTRACT FROM AUTHOR]

The aim of this paper is to introduce a Frank operator in the q-rung orthopair triangular fuzzy linguistic environment on the basis of the notion of the Frank operator and the q-rung orthopair fuzzy set. Firstly, the concept of a q-rung orthopair triangular fuzzy linguistic set (q-ROTrFLS) is proposed, then several basic operations, score, and accuracy functions to compare the q-ROTrFLS values are defined. Secondly, a series of q-rung orthopair triangular fuzzy linguistic Frank aggregation operators are developed, such as q-rung orthopair triangular fuzzy linguistic Frank weighted average (q- ROTrFLWA) operator, q-rung orthopair triangular fuzzy linguistic Frank weighted geometric (q-ROTrFLWG) operator, and we introduce several relevant properties of these operators and prove their validity, and show the relevant relationship between some operators. Thirdly, two different decision-making approaches are constructed in the q-rung orthopair triangular fuzzy linguistic environment. Furthermore, a practical example is given to explain the developed methods. Finally, a comparative study is conducted, and the relevant sensitivity analysis is also discussed, and the outcome shows the prominence and the effectiveness of the developed methods compared to previous studies. [ABSTRACT FROM AUTHOR]

Recently, some improvement has been made in the dominant notion of fuzzy set that is Yager investigated the generalized concept of fuzzy set, Intuitionistic fuzzy set (IFS) and Pythagorean fuzzy set (PFS) and called it q-rung orthopair fuzzy (q-ROF) set (q-ROFS). The aim of this manuscript is to present the concept of q-ROF soft (q-ROFSt) set (q-ROFStS) based on the Dombi operations. Since Dombi operational parameter possess natural flexibility with the resilience of variability. Some new operational laws are defined based on hybrid study of soft sets and q-ROFS. The advantage of Dombi operational parameter is very important to express the experts' attitude in decision making. In this paper, we present q-ROFSt Dombi average (q-ROFSt DA) aggregation operators including q-ROFSt Dombi weighted average (q-ROFSt DWA), q-ROFSt Dombi ordered weighted average (q-ROFSt DOWA) and q-ROFSt Dombi hybrid average (q-ROFSt DHA) operators. Moreover, we investigate q-ROFSt Dombi geometric (q-ROFSt DG) aggregation operators including q-ROFSt Dombi weighted geometric (q-ROFSt DWG), q-ROFSt Dombi ordered weighted geometric (q-ROFSt DOWG), and q-ROFSt Dombi hybrid geometric (q-ROFSt DHG) operators. The basic properties of these operators are presented with detail such us Idempotency, Boundedness, Monotonicity, Shift invariance, and Homogeneity. Thus from the analysis and advantages of proposed model, it is clear that the investigated q-ROFSt DWA operator is the generalized form of IF St DWA, PFSt DWA and q-ROFDWA operators. Similarly, the investigated q-ROFSt DWG operator is the generalized form of IF St DWG, PFSt DWG and q-ROFDWG operators. By applying the develop approach, this manuscript contains the technique and algorithm for multicriteria decision making (MCDM). Further a numerical example is developed to illustrate the flexibility and applicability of the developed operators. [ABSTRACT FROM AUTHOR]

A scenario that often encounters in the event of aggregating options of different experts for the acquisition of a robust overall consensus is the possible existence of extremely large or small values termed as outliers in this paper, which easily lead to counter-intuitive results in decision aggregation. This paper attempts to devise a novel approach to tackle the consensus outliers especially for non-uniform data, filling the gap in the existing literature. In particular, the concentrate region for a set of non-uniform data is first computed with the proposed searching algorithm such that the domain of aggregation function is partitioned into sub-regions. The aggregation will then operate adaptively with respect to the corresponding sub-regions previously partitioned. Finally, the overall aggregation is operated with a proposed novel consensus measure. To demonstrate the working and efficacy of the proposed approach, several illustrative examples are given in comparison to a number of alternative aggregation functions, with the results achieved being more intuitive and of higher consensus. [ABSTRACT FROM AUTHOR]

This paper presents the induced generalized ordered weighted logarithmic aggregation (IGOWLA) operator, this operator is an extension of the generalized ordered weighted logarithmic aggregation (GOWLA) operator. It uses order-induced variables that modify the reordering process of the arguments included in the aggregation. The principal advantage of the introduced induced mechanism is the consideration of highly complex attitude from the decision makers. We study some families of the IGOWLA operator as measures for the characterization of the weighting vector. This paper presents the general formulation of the operator and some special cases, including the induced ordered weighted logarithmic geometric averaging (IOWLGA) operator and the induced ordered weighted logarithmic aggregation (IOWLA). Further generalizations using quasi-arithmetic mean are also proposed. Finally, an illustrative example of a group decision-making procedure using a multi-person analysis and the IGOWLA operator in the area of innovation management is analyzed. [ABSTRACT FROM AUTHOR]

Rough sets, as a powerful tool to deal with uncertainties and inaccuracies in data analysis, have been continuously concerned and studied by many scholars since it was put forward, especially the research on various rough set models. On the other hand, overlap and grouping functions, as two newly aggregation operators and mathematical model to handle the problems involving in information fusion, have been successfully applied in many real-life problems. In this paper, based on overlap and grouping functions, we propose a new fuzzy rough set model named (GO, O)-fuzzy rough sets and consider its characterizations along with topological properties. Properly speaking, firstly, we utilize QL-operators (and also QL-implications) constructed from overlap and grouping functions and fuzzy negations to define the lower approximation operator in (GO, O)-fuzzy rough set model named GO-lower fuzzy rough approximation operator and the upper approximation operator in (GO, O)-fuzzy rough set model is considered as the O-upper fuzzy rough approximation operator in (IO, O)-fuzzy rough set model proposed by Qiao recently. Secondly, we discuss lots of basic properties of (GO, O)-fuzzy rough sets, especially for the properties of GO-lower fuzzy rough approximation operator. Thirdly, we focus on the relationship between (GO, O)-fuzzy rough sets and concrete fuzzy relations. Finally, we give the topological properties of the upper and lower approximation operators in (GO, O)-fuzzy rough set model. [ABSTRACT FROM AUTHOR]

Single-valued neutrosophic sets can efficiently depict a great deal of imprecise, uncertain and discordant information. Hamy mean operator can consider the interrelationships among multiple integrated arguments and Schweizer-Sklar operations express great flexibility in the process of information aggregation. To give full consideration to these advantages, we merge the Hamy mean operator with the Schweizer-Sklar operations in single-valued neutrosophic environment, proposing a single-valued neutrosophic Schweizer-Sklar Hamy mean operator and a single-valued neutrosophic Schweizer-Sklar weighted Hamy mean operator. Besides, we illustrate some specific cases and attributes of the two operators. Moreover, based on the entropy weight method and the single-valued neutrosophic Schweizer-Sklar weighted Hamy mean operator, this paper presents a single-valued neutrosophic Schweizer-Sklar entropic weighted Hamy mean method to tackle multi-attribute decision making problems. At last, the method and other three existing methods are applied to solve a practical multi-attribute decision making problem, which validates the credibility and validity of the single-valued neutrosophic Schweizer-Sklar entropic weighted Hamy mean method by comparing the differences among them. [ABSTRACT FROM AUTHOR]

Modern decision-making (DM) systems are becoming more and more complex and sophisticated in their demands for information expressions and credibility levels. In the existing literature, a trapezoidal fuzzy neutrosophic value (TFNV) that combines trapezoidal fuzzy numbers with neutrosophic values can be better depicted by truth, indeterminacy, and falsity membership functions. Unfortunately, TFNV implies its defect since it lacks a measure of credibility. To make TFNV more creditable, TFNV should be related to its credibility level. Regarding the motivation for combining TFNV with its credibility level, this paper first proposes the concept of a credibility TFNV (C-TFNV) as a new framework of TFNV associated with the measure of credibility. The advantage of its information expression is that C-TFNV has a more creditable ability to describe indeterminate and inconsistent knowledge and judgments of human beings by the mixed information of a TFNV and a related credibility level (an ordered pair of TFNVs). Next, we propose the operational laws of C-TFNVs and the score function of C-TFNV. Furthermore, we present a C-TFNV weighted arithmetic averaging (C-TFNVWAA) and a C-TFNV weighted geometric averaging (C-TFNVWGA) operators and their properties. Then, a multicriteria DM model based on the C-TFNVWAA and C-TFNVWGA operators and the score function is established in the case of C-TFNVs. Finally, an actual DM example of slope decision schemes is provided to show the applicability and efficiency of the established DM model in the case of C-TFNVs. [ABSTRACT FROM AUTHOR]