Search

A large number of runaway electrons (REs) with energies as high as several tens of mega-electron volt (MeV) may be generated during disruptions on a large-scale tokamak. The kinetic energy carried by REs is eventually deposited on the plasma-facing components, causing damage and posing a threat on the operation of the tokamak. The remaining magnetic energy following a thermal quench is significant on a large-scale tokamak. The conversion of magnetic energy to runaway kinetic energy will increase the threat of runaway electrons on the first wall. The magnetic energy dissipated inside the vacuum vessel (VV) equals the decrease of initial magnetic energy inside the VV plus the magnetic energy flowing into the VV during a disruption. Based on the estimated magnetic energy, the evolution of magnetic-kinetic energy conversion are analyzed through three periods in disruptions with a runaway current plateau.

The suppression of disruption-generated runaway electrons (REs) by supersonic molecular beam injection (SMBI) has been investigated on the J-TEXT tokamak. Experimental results demonstrate that the hydrogen injected by SMBI during plasma current flattop phase can provoke magnetic perturbations, which increase RE losses rapidly. The effective radial diffusion coefficient of REs due to SMBI is estimated as D r ≈ 16 m2 s−1. Based on this benefit, the SMBI has been used to explore the suppression of disruption-generated REs. In J-TEXT, RE current is created with rapid argon injection by a massive gas injection valve. It is found that hydrogen SMBI before disruption efficiently suppresses the generation of RE current.

Runaway currents following disruptions have an important effect on the first wall in current tokamaks and will be more severe in next generation tokamaks. The behavior of runaway currents in massive gas injection (MGI) induced disruptions have been investigated in the J-TEXT tokamak. The cold front induced by the gas jet penetrates helically along field lines, preferentially toward the high field side and stops at a location near the q = 2 surface before the disruption. When the cold front reaches the q = 2 surface it initiates magnetohydrodynamic activities and results in disruption. It is found that the MGI of He or Ne results in runaway free shutdown in a large range of gas injections. Mixture injection of He and Ar (90% He and 10%Ar) consistently results in runaway free shutdown. A moderate amount of Ar injection could produce significant runaway current. The maximum runaway energy in the runaway plateau is estimated using a simplified model which neglects the drag forces and other energy loss mechanisms. The maximum runaway energy increases with decreasing runaway current. Imaging of the runaway beam using a soft x-ray array during the runaway current plateau indicates that the runaway beam is located in the center of the plasma. Resonant magnetic perturbation (RMP) is applied to reduce the runaway current successfully during the disruption phase in a small scale tokamak, J-TEXT. When the runaway current builds up, the application of RMP cannot decouple the runaway beam due to the lower sensitivity of the energetic runaway electrons to the magnetic perturbation.

The suppression of runaways following disruptions is key for the safe operation of ITER. The massive gas injection (MGI) has been developed to mitigate heat loads, electromagnetic forces and runaway electrons (REs) during disruptions. However, MGI may not completely prevent the generation of REs during disruptions on ITER. Resonant magnetic perturbation (RMP) has been applied to suppress runaway generation during disruptions on several machines. It was found that strong RMP results in the enhancement of runaway production instead of runaway suppression on J-TEXT. The runaway current was about 50% pre-disruption plasma current in argon induced reference disruptions. With moderate RMP, the runway current decreased to below 30% pre-disruption plasma current. The runaway current plateaus reach 80% of the pre-disruptive current when strong RMP was applied. Strong RMP may induce large size magnetic islands that could confine more runaway seed during disruptions. This has important implications for runaway suppression on large machines.

Disruption mitigation is essential for the next generation of tokamaks. The prediction of plasma disruption is the key to disruption mitigation. A neural network combining eight input signals has been developed to predict the density limit disruptions on the J-TEXT tokamak. An optimized training method has been proposed which has improved the prediction performance. The network obtained has been tested on 64 disruption shots and 205 non-disruption shots. A successful alarm rate of 82.8% with a false alarm rate of 12.3% can be achieved at 4.8 ms prior to the current spike of the disruption. It indicates that more physical parameters than the current physical scaling should be considered for predicting the density limit. It was also found that the critical density for disruption can be predicted several tens of milliseconds in advance in most cases. Furthermore, if the network is used for real-time density feedback control, more than 95% of the density limit disruptions can be avoided by setting a proper threshold.