Search

The impact of the short gate length on the drain current and low frequency (LF) noise in GaN/AlGaN metal-oxide-semiconductor high-electron-mobility field-effect-transistors has been studied. In some short devices, a parasitic subthreshold current is observed. In this article, the origin of parasitic subthreshold currents were explored using LF noise and trapping transient measurements. The LF noise power spectral density (PSD) of the devices without parasitic drain current decreased monotonically with the decrease of the drain current, while the PSD of the device with the parasitic drain current strongly increased for lower drain current. The 1/f1.5 noise corresponding with the parasitic leakage can be explained by the level broadening of generation-recombination centers in the GaN channel. This is confirmed by the trapping transient measurements, revealing a temperature-independent time constant, associated with the leakage path in short channel transistors, exhibiting the subthreshold humps. [ABSTRACT FROM AUTHOR]

This work studies differential pair circuits designed with Line tunnel field effect transistors (TFETs), comparing their suitability with conventional Point TFETs. Differential voltage gain (Ad), compliance voltage and sensitivity to channel length mismatch are analyzed experimentally for different temperatures. The first part highlights individual characteristics of Line TFETs, focusing on behaviors that affect analog circuits. In comparison to Point TFETs, Line TFETs present higher drive current, better transconductance and worse output conductance. In the second part, differential pairs are studied at room temperature for different dimensions and bias conditions. Line TFETs present the highest Ad, while Point TFET decrease the susceptibility to channel length mismatch. In the last part, the temperature impact is investigated. Based on the activation energy, the impact of band-to-band tunneling and trap-assisted tunneling is discussed for different bias conditions. A general equation is proposed, including the technology and the susceptibility to temperature and dimensions. It was observed that Line TFETs are a good option to design differential pairs with higher Ad and ON-state current than Point TFETs. [ABSTRACT FROM AUTHOR]