Search

Different concepts for active windows for dynamic light regulation and vibrant climatization support in buildings are compared, followed by a MEMS concept using millions of micromirrors inside insulation or vacuum glazing to guide and control light by electrostatic mirror actuation. The concept enables energy saving, tailored personalized lighting, security, and smart personalized environments in buildings. The window transmission is controlled continuously, showing the eye a variable-tone pane. The amount, direction, and degree of steering of the guided light are tailored to winter, summer, and variable daytime requirements, protecting rooms and persons inside from sun-light while providing tailored natural daylight illumination. The concept is based on reflection, in contrast to existing concepts based on absorption. These micromirror arrays have been designed, fabricated, and characterized. Experimental results on electrostatic actuation voltages, extrapolated lifetime, power consumption, and heat impact regulation are presented. [ABSTRACT FROM AUTHOR]

Miniaturized spectrometers can be implemented using Fabry–Pérot (FP) filter arrays. Such filters are defined by two parallel mirrors with a resonance cavity in between. For high optical quality, ion beam sputtered distributed Bragg reflectors (DBRs), with alternating high and low refractive index material pairs, can be used as the FP mirrors; while 3D nanoimprint technology provides an efficient way of implementing multiple organic FP cavities of different heights in a single step. However, the high residual stress in ion beam sputtered films results in poor adhesion between the DBR films and the organic polymer cavities, causing debonding of the DBR. Therefore, the residual stress of the ion beam sputtered films forming the DBRs must be reduced. Niobium pentoxide (Nb2O5) and silicon dioxide (SiO2) are used as the DBR materials in this work due to their high index contrast, resulting in high reflectivity for only a few alternating pairs. Stress relaxation in ion beam sputtered Nb2O5 and SiO2 films is achieved in this work by deposition under simultaneous high energy ion bombardment (oxygen and argon gas mixture) from a second ion source. Using this technique, the film density and hence compressive film stress for both Nb2O5 and SiO2 films is reduced without introducing any additional optical absorption in the films. FP filter arrays fabricated with stress reduced Nb2O5 and SiO2 as DBR films exhibit high optical and mechanical performance, with good adhesion between the films and the polymer cavity. [ABSTRACT FROM AUTHOR]