Search

Objective. Multi-contrast magnetic resonance imaging (MC MRI) can obtain more comprehensive anatomical information of the same scanning object but requires a longer acquisition time than single-contrast MRI. To accelerate MC MRI speed, recent studies only collect partial k-space data of one modality (target contrast) to reconstruct the remaining non-sampled measurements using a deep learning-based model with the assistance of another fully sampled modality (reference contrast). However, MC MRI reconstruction mainly performs the image domain reconstruction with conventional CNN-based structures by full supervision. It ignores the prior information from reference contrast images in other sparse domains and requires fully sampled target contrast data. In addition, because of the limited receptive field, conventional CNN-based networks are difficult to build a high-quality non-local dependency. Approach. In the paper, we propose an Image-Wavelet domain ConvNeXt-based network (IWNeXt) for self-supervised MC MRI reconstruction. Firstly, INeXt and WNeXt based on ConvNeXt reconstruct undersampled target contrast data in the image domain and refine the initial reconstructed result in the wavelet domain respectively. To generate more tissue details in the refinement stage, reference contrast wavelet sub-bands are used as additional supplementary information for wavelet domain reconstruction. Then we design a novel attention ConvNeXt block for feature extraction, which can capture the non-local information of the MC image. Finally, the cross-domain consistency loss is designed for self-supervised learning. Especially, the frequency domain consistency loss deduces the non-sampled data, while the image and wavelet domain consistency loss retain more high-frequency information in the final reconstruction. Main results. Numerous experiments are conducted on the HCP dataset and the M4Raw dataset with different sampling trajectories. Compared with DuDoRNet, our model improves by 1.651 dB in the peak signal-to-noise ratio. Significance. IWNeXt is a potential cross-domain method that can enhance the accuracy of MC MRI reconstruction and reduce reliance on fully sampled target contrast images. [ABSTRACT FROM AUTHOR]

Objective. Magnetic particle imaging (MPI) shows potential for contributing to biomedical research and clinical practice. However, MPI images are effectively affected by noise in the signal as its reconstruction is an ill-posed inverse problem. Thus, effective reconstruction method is required to reduce the impact of the noise while mapping signals to MPI images. Traditional methods rely on the hand-crafted data-consistency (DC) term and regularization term based on spatial priors to achieve noise-reducing and reconstruction. While these methods alleviate the ill-posedness and reduce noise effects, they may be difficult to fully capture spatial features. Approach. In this study, we propose a deep neural network for end-to-end reconstruction (DERnet) in MPI that emulates the DC term and regularization term using the feature mapping subnetwork and post-processing subnetwork, respectively, but in a data-driven manner. By doing so, DERnet can better capture signal and spatial features without relying on hand-crafted priors and strategies, thereby effectively reducing noise interference and achieving superior reconstruction quality. Main results. Our data-driven method outperforms the state-of-the-art algorithms with an improvement of 0.9–8.8 dB in terms of peak signal-to-noise ratio under various noise levels. The result demonstrates the advantages of our approach in suppressing noise interference. Furthermore, DERnet can be employed for measured data reconstruction with improved fidelity and reduced noise. In conclusion, our proposed method offers performance benefits in reducing noise interference and enhancing reconstruction quality by effectively capturing signal and spatial features. Significance. DERnet is a promising candidate method to improve MPI reconstruction performance and facilitate its more in-depth biomedical application. [ABSTRACT FROM AUTHOR]

Background. Recently, approaches have utilized the superior anatomical information provided by magnetic resonance imaging (MRI) to guide the reconstruction of positron emission tomography (PET). One of those approaches is the Bowsher's prior, which has been accelerated lately with a convolutional neural network (CNN) to reconstruct MR-guided PET in the imaging domain in routine clinical imaging. Two differently trained Bowsher-CNN methods (B-CNN0 and B-CNN) have been trained and tested on brain PET/MR images with non-PSMA tracers, but so far, have not been evaluated in other anatomical regions yet. Methods. A NEMA phantom with five of its six spheres filled with the same, calibrated concentration of 18F-DCFPyL-PSMA, and thirty-two patients (mean age 64 ± 7 years) with biopsy-confirmed PCa were used in this study. Reconstruction with either of the two available Bowsher-CNN methods were performed on the conventional MR-based attenuation correction (MRAC) and T1-MR images in the imaging domain. Detectable volume of the spheres and tumors, relative contrast recovery (CR), and background variation (BV) were measured for the MRAC and the Bowsher-CNN images, and qualitative assessment was conducted by ranking the image sharpness and quality by two experienced readers. Results. For the phantom study, the B-CNN produced 12.7% better CR compared to conventional reconstruction. The small sphere volume (<1.8 ml) detectability improved from MRAC to B-CNN by nearly 13%, while measured activity was higher than the ground-truth by 8%. The signal-to-noise ratio, CR, and BV were significantly improved (p < 0.05) in B-CNN images of the tumor. The qualitative analysis determined that tumor sharpness was excellent in 76% of the PET images reconstructed with the B-CNN method, compared to conventional reconstruction. Conclusions. Applying the MR-guided B-CNN in clinical prostate PET/MR imaging improves some quantitative, as well as qualitative imaging measures. The measured improvements in the phantom are also clearly translated into clinical application. [ABSTRACT FROM AUTHOR]

Objective. Positron emission tomography (PET) is a functional imaging widely used in various applications such as tumour detection. PET image reconstruction is an ill-posed inverse problem, and the model-based iterative reconstruction methods commonly used in clinical practice have disadvantages such as long time consumption and low signal-to-noise ratio, especially at low doses. Approach. In this study, we propose a deep learning-based reconstruction method that is capable of reconstructing images directly from low-count sinograms. Our network consists of two parts, a truncated inverse radon layer for implementing domain transform and a U-shaped network for image enhancement. Main result. We validated our method on both simulation data and real data. Compared to ordered subset expectation maximization with a post-Guassian filter, the structural similarity can be improved from 0.9357 to 0.9613 and the peak signal-to-noise ratio can be improved by 5 dB. Significance. The proposed method can directly convert low-count sinograms into PET images, while obtaining improved image quality and having less time consumption than iterative reconstruction algorithms and the state-of-the-art convolutional neural network. [ABSTRACT FROM AUTHOR]

Many deep learning (DL)-based image restoration methods for low-dose CT (LDCT) problems directly employ the end-to-end networks on low-dose training data without considering dose differences. However, the radiation dose difference has a great impact on the ultimate results, and lower doses increase the difficulty of restoration. Moreover, there is increasing demand to design and estimate acceptable scanning doses for patients in clinical practice, necessitating dose-aware networks embedded with adaptive dose estimation. In this paper, we consider these dose differences of input LDCT images and propose an adaptive dose-aware network. First, considering a large dose distribution range for simulation convenience, we coarsely define five dose levels in advance as lowest, lower, mild, higher and highest radiation dose levels. Instead of directly building the end-to-end mapping function between LDCT images and high-dose CT counterparts, the dose level is primarily estimated in the first stage. In the second stage, the adaptively learned low-dose level is used to guide the image restoration process as the pattern of prior information through the channel feature transform. We conduct experiments on a simulated dataset based on original high dose parts of American Association of Physicists in Medicine challenge datasets from the Mayo Clinic. Ablation studies validate the effectiveness of the dose-level estimation, and the experimental results show that our method is superior to several other DL-based methods. Specifically, our method provides obviously better performance in terms of the peak signal-to-noise ratio and visual quality reflected in subjective scores. Due to the dual-stage process, our method may suffer limitations under more parameters and coarse dose-level definitions, and thus, further improvements in clinical practical applications with different CT equipment vendors are planned in future work. [ABSTRACT FROM AUTHOR]

Brain PET, which has led research in molecular imaging and diagnosis of brain cancer, epilepsy and neurodegenerative disorders, is being spotlighted again to promote earlier diagnosis of dementia with the advent of amyloid and tau tracers. To meet this demand, in this paper, we developed a brain-dedicated PET imaging device with a hemispherical detector arrangement, which provides comparable sensitivity with fewer detectors than conventional cylindrical geometries. The introduction of the time-of-flight (TOF) measurement capability was a key point for the development to get a gain in the image signal-to-noise ratio. Currently, whole-body PET scanners with around 200–400 ps coincidence resolving time (CRT) are commercially available. In order to obtain the same TOF gain which can be obtained with 400 ps CRT for a 30 cm diameter object, 267 ps CRT will be required for a 20 cm diameter object such as the human head. In this work, therefore, we aimed at developing a TOF brain-dedicated PET prototype with the hemisphere detector arrangement and the CRT faster than 267 ps. The detector was composed of a 12 × 12 lutetium fine silicate (LFS) array coupled with a 12 × 12 multi-pixel photon counter (MPPC) array. Each LFS crystal with a size of 4.14 × 4.14 × 10 mm3 was individually coupled to a separate MPPC. Singles list-mode data from each detector were stored, and coincidences were identified using a coincidence-detection software algorithm. The CRT of 245 ps was finally achieved as the system average after a fine timing correction. For image reconstruction, we implemented the list-mode TOF-OSEM. For a small rod phantom, rods of 3 mm diameter were clearly separated. Also, images of the 3D Hoffman brain phantom, which demonstrated clear contrast between gray and white matter, supported the effect of TOF information. [ABSTRACT FROM AUTHOR]

The primary cone-beam computed tomography (CBCT) imaging beam scatters inside the patient and produces a contaminating photon fluence that is registered by the detector. Scattered photons cause artifacts in the image reconstruction, and are partially responsible for the inferior image quality compared to diagnostic fan-beam CT. In this work, a deep convolutional autoencoder (DCAE) and projection-based scatter removal algorithm were constructed for the ImagingRingTM system on rails (IRr), which allows for non-isocentric acquisitions around virtual rotation centers with its independently rotatable source and detector arms. A Monte Carlo model was developed to simulate (i) a non-isocentric training dataset of ≈1200 projection pairs (primary + scatter) from 27 digital head-and-neck cancer patients around five different virtual rotation centers (DCAENONISO), and (ii) an isocentric dataset existing of ≈1200 projection pairs around the physical rotation center (DCAEISO). The scatter removal performance of both DCAE networks was investigated in two digital anthropomorphic phantom simulations and due to superior performance only the DCAENONISO was applied on eight real patient acquisitions. Measures for the quantitative error, the signal-to-noise ratio, and the similarity were evaluated for two simulated digital head-and-neck patients, and the contrast-to-noise ratio (CNR) was investigated between muscle and adipose tissue in the real patient image reconstructions. Image quality metrics were compared between the uncorrected data, the currently implemented heuristic scatter correction data, and the DCAE corrected image reconstruction. The DCAENONISO corrected image reconstructions of two digital patient simulations showed superior image quality metrics compared to the uncorrected and corrected image reconstructions using a heuristic scatter removal. The proposed DCAENONISO scatter correction in this study was successfully demonstrated in real non-isocentric patient CBCT acquisitions and achieved statistically significant higher CNRs compared to the uncorrected or the heuristic corrected image data. This paper presents for the first time a projection-based scatter removal algorithm for isocentric and non-isocentric CBCT imaging using a deep convolutional autoencoder trained on Monte Carlo composed datasets. The algorithm was successfully applied to real patient data. [ABSTRACT FROM AUTHOR]

Time-of-flight (TOF) information improves the signal-to-noise ratio in positron emission tomography (PET). The computation cost in processing TOF-PET sinograms is substantially higher than for nonTOF data because the data in each line of response is divided among multiple TOF bins. This additional cost has motivated research into methods for rebinning TOF data into lower dimensional representations that exploit redundancies inherent in TOF data. We have previously developed approximate Fourier methods that rebin TOF data into either three-dimensional (3D) nonTOF or 2D nonTOF formats. We refer to these methods respectively as FORET-3D and FORET-2D. Here we describe maximum a posteriori (MAP) estimators for use with FORET rebinned data. We first derive approximate expressions for the variance of the rebinned data. We then use these results to rescale the data so that the variance and mean are approximately equal allowing us to use the Poisson likelihood model for MAP reconstruction. MAP reconstruction from these rebinned data uses a system matrix in which the detector response model accounts for the effects of rebinning. Using these methods we compare the performance of FORET-2D and 3D with TOF and nonTOF reconstructions using phantom and clinical data. Our phantom results show a small loss in contrast recovery at matched noise levels using FORET compared to reconstruction from the original TOF data. Clinical examples show FORET images that are qualitatively similar to those obtained from the original TOF-PET data but with a small increase in variance at matched resolution. Reconstruction time is reduced by a factor of 5 and 30 using FORET3D+MAP and FORET2D+MAP respectively compared to 3D TOF MAP, which makes these methods attractive for clinical applications. [ABSTRACT FROM AUTHOR]

Three-dimensional reconstruction of cardiac vasculature from angiographic C-arm CT (rotational angiography) data is a major challenge. Motion artefacts corrupt image quality, reducing usability for diagnosis and guidance. Many state-of-the-art approaches depend on retrospective ECG-gating of projection data for image reconstruction. A trade-off has to be made regarding the size of the ECG-gating window. A large temporal window is desirable to avoid undersampling. However, residual motionwill occur in a large window, causing motion artefacts. We present an algorithm to correct for residual motion. Our approach is based on a deformable 2D-2D registration between the forward projection of an initial, ECG-gated reconstruction, and the original projection data. The approach is fully automatic and does not require any complex segmentation of vasculature, or landmarks. The estimated motion is compensated for during the backprojection step of a subsequent reconstruction. We evaluated the method using the publicly available CAVAREV platform and on six human clinical datasets.We found a better visibility of structure, reduced motion artefacts, and increased sharpness of the vessels in the compensated reconstructions compared to the initial reconstructions. At the time of writing, our algorithm outperforms the leading result of the CAVAREV ranking list. For the clinical datasets, we found an average reduction of motion artefacts by 13 ± 6%. Vessel sharpness was improved by 25 ± 12% on average [ABSTRACT FROM AUTHOR]

We introduce the application of maximum-likelihood (ML) principles to the image reconstruction problem in coherent diffractive imaging. We describe an implementation of the optimization procedure for ptychography, using conjugate gradients and including preconditioning strategies, regularization and typical modifications of the statistical noise model. The optimization principle is compared to a difference map reconstruction algorithm. With simulated data important improvements are observed, as measured by a strong increase in the signal-to-noise ratio. Significant gains in resolution and sensitivity are also demonstrated in the ML refinement of a reconstruction from experimental x-ray data. The immediate consequence of our results is the possible reduction of exposure, or dose, by up to an order of magnitude for a reconstruction quality similar to iterative algorithms currently in use. [ABSTRACT FROM AUTHOR]

Incorporation of a resolution model during statistical image reconstruction often produces images of improved resolution and signal-to-noise ratio. A novel and practical methodology to rapidly and accurately determine the overall emission and detection blurring component of the system matrix using a printed point source array within a custom-made Perspex phantom is presented. The array was scanned at different positions and orientations within the field of view (FOV) to examine the feasibility of extrapolating the measured point source blurring to other locations in the FOV and the robustness of measurements from a single point source array scan. We measured the spatially-variant image-based blurring on two PET/CT scanners, the B-Hi-Rez and the TruePoint TrueV. These measured spatially-variant kernels and the spatially-invariant kernel at the FOV centre were then incorporated within an ordinary Poisson ordered subset expectation maximization (OP-OSEM) algorithm and compared to the manufacturer''s implementation using projection space resolution modelling (RM). Comparisons were based on a point source array, the NEMA IEC image quality phantom, the Cologne resolution phantom and two clinical studies (carbon-11 labelled anti-sense oligonucleotide [11C]-ASO and fluorine-18 labelled fluoro-l-thymidine [18F]-FLT). Robust and accurate measurements of spatially-variant image blurring were successfully obtained from a single scan. Spatially-variant resolution modelling resulted in notable resolution improvements away from the centre of the FOV. Comparison between spatially-variant image-space methods and the projection-space approach (the first such report, using a range of studies) demonstrated very similar performance with our image-based implementation producing slightly better contrast recovery (CR) for the same level of image roughness (IR). These results demonstrate that image-based resolution modelling within reconstruction is a valid alternative to projection-based modelling, and that, when using the proposed practical methodology, the necessary resolution measurements can be obtained from a single scan. This approach avoids the relatively time-consuming and involved procedures previously proposed in the literature. [ABSTRACT FROM AUTHOR]

A sectorial sensitivity matrix using a K-means clustering algorithm has been proposed for electrical capacitance tomography (ECT) for accurate determination of permittivity distribution in the inclusion within the background area. The proposed sectorial sensitivity matrix clusters the pixel position of the inclusion area to minimize the soft field effect that leads to image artifacts and blurred images. The standard sensitivity matrix is nonlinear thus it is not easy to eliminate image artifacts due to the noise signal and nonlinear electric field propagation. The performance of the sectorial sensitivity matrix is evaluated through numerical simulation and experimental studies. From the results, the sectorial sensitivity matrix improves the reconstructed images with a 42.92% and 67.12% lower root mean square error RMSE, 1.66% and 16.16% higher correlation coefficient CC, and 21.37% lower image error IE values in the simulation and experimental studies respectively as compared to the standard sensitivity matrix. The sectorial sensitivity matrix has an advantage of high performance even when the signal to noise ratio in an ECT system is low. Under such conditions, the present normalization method is incapable of calculating the normalized capacitance of the inclusion due to the low ratio of permittivity of the inclusion to that of the background. [ABSTRACT FROM AUTHOR]

PET images often suffer poor signal-to-noise ratio (SNR). Our objective is to improve the SNR of PET images using a deep neural network (DNN) model and MRI images without requiring any higher SNR PET images in training. Our proposed DNN model consists of three modified U-Nets (3U-net). The PET training input data and targets were reconstructed using filtered-backprojection (FBP) and maximum likelihood expectation maximization (MLEM), respectively. FBP reconstruction was used because of its computational efficiency so that the trained network not only removes noise, but also accelerates image reconstruction. Digital brain phantoms downloaded from BrainWeb were used to evaluate the proposed method. Poisson noise was added into sinogram data to simulate a 6 min brain PET scan. Attenuation effect was included and corrected before the image reconstruction. Extra Poisson noise was introduced to the training inputs to improve the network denoising capability. Three independent experiments were conducted to examine the reproducibility. A lesion was inserted into testing data to evaluate the impact of mismatched MRI information using the contrast-to-noise ratio (CNR). The negative impact on noise reduction was also studied when miscoregistration between PET and MRI images occurs. Compared with 1U-net trained with only PET images, training with PET/MRI decreased the mean squared error (MSE) by 31.3% and 34.0% for 1U-net and 3U-net, respectively. The MSE reduction is equivalent to an increase in the count level by 2.5 folds and 2.9 folds for 1U-net and 3U-net, respectively. Compared with the MLEM images, the lesion CNR was improved 2.7 folds and 1.4 folds for 1U-net and 3U-net, respectively. The results show that the proposed method could improve the PET SNR without having higher SNR PET images. [ABSTRACT FROM AUTHOR]

We present an imaging approach via sparsity constraint and sparse speckle illumination which can dramatically enhance the optical system’s imaging resolution. When the object is illuminated by some sparse speckles and the sparse reconstruction algorithm is utilized to restore the blur image, numerical simulated results demonstrate that the image, whose resolution exceeds the Rayleigh limit, can be stably reconstructed even if the detection signal-to-noise ratio (SNR) is less than 10 dB. Factors affecting the quality of the reconstructed image, such as the coded pattern’s sparsity and the detection SNR, are also studied. [ABSTRACT FROM AUTHOR]

PET imaging plays an important role in scientific and clinical measurement of biochemical and physiological processes. Model-based PET image reconstruction such as the iterative expectation maximization algorithm seeking the maximum likelihood solution leads to increased noise. The maximum a posteriori (MAP) estimate removes divergence at higher iterations. However, a conventional smoothing prior or a total-variation (TV) prior in a MAP reconstruction algorithm causes over smoothing or blocky artifacts in the reconstructed images. We propose to use dictionary learning (DL) based sparse signal representation in the formation of the prior for MAP PET image reconstruction. The dictionary to sparsify the PET images in the reconstruction process is learned from various training images including the corresponding MR structural image and a self-created hollow sphere. Using simulated and patient brain PET data with corresponding MR images, we study the performance of the DL-MAP algorithm and compare it quantitatively with a conventional MAP algorithm, a TV-MAP algorithm, and a patch-based algorithm. The DL-MAP algorithm achieves improved bias and contrast (or regional mean values) at comparable noise to what the other MAP algorithms acquire. The dictionary learned from the hollow sphere leads to similar results as the dictionary learned from the corresponding MR image. Achieving robust performance in various noise-level simulation and patient studies, the DL-MAP algorithm with a general dictionary demonstrates its potential in quantitative PET imaging. [ABSTRACT FROM AUTHOR]

A method to enhance the quality of the tomographic reconstruction and, consequently, the 3D velocity measurement accuracy, is presented. The technique is based on integrating information on the objects to be reconstructed within the algebraic reconstruction process. A first guess intensity distribution is produced with a standard algebraic method, then the distribution is rebuilt as a sum of Gaussian blobs, based on location, intensity and size of agglomerates of light intensity surrounding local maxima. The blobs substitution regularizes the particle shape allowing a reduction of the particles discretization errors and of their elongation in the depth direction. The performances of the blob-enhanced reconstruction technique (BERT) are assessed with a 3D synthetic experiment. The results have been compared with those obtained by applying the standard camera simultaneous multiplicative reconstruction technique (CSMART) to the same volume. Several blob-enhanced reconstruction processes, both substituting the blobs at the end of the CSMART algorithm and during the iterations (i.e. using the blob-enhanced reconstruction as predictor for the following iterations), have been tested. The results confirm the enhancement in the velocity measurements accuracy, demonstrating a reduction of the bias error due to the ghost particles. The improvement is more remarkable at the largest tested seeding densities. Additionally, using the blobs distributions as a predictor enables further improvement of the convergence of the reconstruction algorithm, with the improvement being more considerable when substituting the blobs more than once during the process. The BERT process is also applied to multi resolution (MR) CSMART reconstructions, permitting simultaneously to achieve remarkable improvements in the flow field measurements and to benefit from the reduction in computational time due to the MR approach. Finally, BERT is also tested on experimental data, obtaining an increase of the signal-to-noise ratio in the reconstructed flow field and a higher value of the correlation factor in the velocity measurements with respect to the volume to which the particles are not replaced. [ABSTRACT FROM AUTHOR]

Whole-body (WB) dynamic PET has recently demonstrated its potential in translating the quantitative benefits of parametric imaging to the clinic. Post-reconstruction standard Patlak (sPatlak) WB graphical analysis utilizes multi-bed multi-pass PET acquisition to produce quantitative WB images of the tracer influx rate Ki as a complimentary metric to the semi-quantitative standardized uptake value (SUV). The resulting Ki images may suffer from high noise due to the need for short acquisition frames. Meanwhile, a generalized Patlak (gPatlak) WB post-reconstruction method had been suggested to limit Ki bias of sPatlak analysis at regions with non-negligible 18F-FDG uptake reversibility; however, gPatlak analysis is non-linear and thus can further amplify noise. In the present study, we implemented, within the open-source software for tomographic image reconstruction platform, a clinically adoptable 4D WB reconstruction framework enabling efficient estimation of sPatlak and gPatlak images directly from dynamic multi-bed PET raw data with substantial noise reduction. Furthermore, we employed the optimization transfer methodology to accelerate 4D expectation–maximization (EM) convergence by nesting the fast image-based estimation of Patlak parameters within each iteration cycle of the slower projection-based estimation of dynamic PET images. The novel gPatlak 4D method was initialized from an optimized set of sPatlak ML-EM iterations to facilitate EM convergence. Initially, realistic simulations were conducted utilizing published 18F-FDG kinetic parameters coupled with the XCAT phantom. Quantitative analyses illustrated enhanced Ki target-to-background ratio (TBR) and especially contrast-to-noise ratio (CNR) performance for the 4D versus the indirect methods and static SUV. Furthermore, considerable convergence acceleration was observed for the nested algorithms involving 10–20 sub-iterations. Moreover, systematic reduction in Ki % bias and improved TBR were observed for gPatlak versus sPatlak. Finally, validation on clinical WB dynamic data demonstrated the clinical feasibility and superior Ki CNR performance for the proposed 4D framework compared to indirect Patlak and SUV imaging. [ABSTRACT FROM AUTHOR]

For the problem of image restoration of observed images corrupted by blur and impulse noise, the widely used TVL1 model may deviate from both the data-acquisition model and the prior model, especially for high noise levels. In order to seek a solution of high recovery quality beyond the reach of the TVL1 model, we propose an adaptive correction procedure for TVL1 image deblurring under impulse noise. Then, a proximal alternating direction method of multipliers (ADMM) is presented to solve the corrected TVL1 model and its convergence is also established under very mild conditions. It is verified by numerical experiments that our proposed approach outperforms the TVL1 model in terms of signal-to-noise ratio (SNR) values and visual quality, especially for high noise levels: it can handle salt-and-pepper noise as high as 90% and random-valued noise as high as 70%. In addition, a comparison with a state-of-the-art method, the two-phase method, demonstrates the superiority of the proposed approach. [ABSTRACT FROM AUTHOR]

Magnetic particle imaging is a quantitative functional imaging technique that allows imaging of the spatial distribution of super-paramagnetic iron oxide particles at high temporal resolution. The raw data acquisition can be performed at frame rates of more than 40 volumes s−1. However, to date image reconstruction is performed in an offline step and thus no direct feedback is available during the experiment. Considering potential interventional applications such direct feedback would be mandatory. In this work, an online reconstruction framework is implemented that allows direct visualization of the particle distribution on the screen of the acquisition computer with a latency of about 2 s. The reconstruction process is adaptive and performs block-averaging in order to optimize the signal quality for a given amount of reconstruction time. [ABSTRACT FROM AUTHOR]

The coincidence time resolution (CTR) becomes a key parameter of 511keV gamma detection in time of flight positron emission tomography (TOF-PET). This is because additional information obtained through timing leads to a better noise suppression and therefore a better signal to noise ratio in the reconstructed image. In this paper we present the results of CTR measurements on two different SiPM technologies from FBK coupled to LSO:Ce codoped 0.4%Ca crystals. We compare the measurements performed at two separate test setups, i.e. at CERN and at FBK, showing that the obtained results agree within a few percent. We achieve a best CTR value of 85  ±  4 ps FWHM for 2  ×  2  ×  3 mm3 LSO:Ce codoped 0.4%Ca crystals, thus breaking the 100 ps barrier with scintillators similar to LSO:Ce or LYSO:Ce. We also demonstrate that a CTR of 140  ±  5 ps can be achieved for longer 2  ×  2  ×  20 mm3 crystals, which can readily be implemented in the current generation PET systems to achieve the desired increase in the signal to noise ratio. [ABSTRACT FROM AUTHOR]

Ghost imaging (GI) offers great potential with respect to conventional imaging techniques. It is an open problem in GI systems that a long acquisition time is be required for reconstructing images with good visibility and signal-to-noise ratios (SNRs). In this paper, we propose a new scheme to get good performance with a shorter construction time. We call it correspondence normalized ghost imaging based on compressive sensing (CCNGI). In the scheme, we enhance the signal-to-noise performance by normalizing the reference beam intensity to eliminate the noise caused by laser power fluctuations, and reduce the reconstruction time by using both compressive sensing (CS) and time-correspondence imaging (CI) techniques. It is shown that the qualities of the images have been improved and the reconstruction time has been reduced using CCNGI scheme. For the two-grayscale “double-slit" image, the mean square error (MSE) by GI and the normalized GI (NGI) schemes with the measurement number of 5000 are 0.237 and 0.164, respectively, and that is 0.021 by CCNGI scheme with 2500 measurements. For the eight-grayscale “lena" object, the peak signal-to-noise rates (PSNRs) are 10.506 and 13.098, respectively using GI and NGI schemes while the value turns to 16.198 using CCNGI scheme. The results also show that a high-fidelity GI reconstruction has been achieved using only 44% of the number of measurements corresponding to the Nyquist limit for the two-grayscale “double-slit" object. The qualities of the reconstructed images using CCNGI are almost the same as those from GI via sparsity constraints (GISC) with a shorter reconstruction time. [ABSTRACT FROM AUTHOR]

A modified reconstruction algorithm to improve the quality of reconstructed images of multi-frame Fresnel digital holography is presented. When the reference beams are plane or spherical waves with azimuth encoding, by introducing two spherical wave factors, images can be reconstructed with only one time Fourier transform. In numerical simulation, this algorithm could simplify the reconstruction process and improve the signal-to-noise ratio of the reconstructed images. In single-frame reconstruction experiments, the accurate reconstructed image is obtained with this simplified algorithm. [ABSTRACT FROM AUTHOR]

The detection of gamma rays using a camera based on Compton scattering has become widespread because of its sensitivity and efficiency. Apart from the challenge arising from the Compton camera design, another price must be paid: the complex image reconstruction process of the object under study from the measured Compton scattered data. In this paper, a mathematical model of projections generated by photons scattered in a generic Compton camera is defined, relating the projections to the object by an integral transform, namely the Compton transform. The set of projections can be split into subsets following the slope a of the direction of the scattered photons. We show that each subset allows us to invert the Compton transform and exactly recover the image of the object. In practical applications, where the number of acquired photons is low and each reconstructed image is noisy, averaging improves dramatically the signal-to-noise ratio. Finally, the validity of the approach is proved by numerical experiments. [ABSTRACT FROM AUTHOR]