Search

Synchronous Reluctance Machines (SRM’s) are gaining more and more importance in various fields of application thanks to their known merits like rugged construction, high efficiency, absence of field windings, no or reduced need for permanent magnets. Out of the possible design variants, in this paper SynRel motors with uniform mechanical air-gap and circularly-shaped flux barriers are taken into account and a conformal-mapping approach to their analytical modeling and simulation is proposed. A suitable conformal transformation is introduced to compute the reluctance of each rotor circularly-shaped flux barrier and the result is then used to analytically determine the air-gap flux density distribution and the electromagnetic torque of the machine in arbitrary operating conditions. The accuracy of the methodology proposed is assessed against finite element analysis.

This article reports on the design, development, and validation of advanced prototype 2 MVA generation equipment [i.e., naval package (NP)] for a shipboard medium-voltage dc integrated power system (MVDC IPS). The generation equipment is based on an ultrahigh-speed 22,500-r/min 12-phase alternator, which feeds an ac/dc power electronics converter comprising four diode rectifiers and four insulated-gate bipolar transistor (IGBT) choppers. The prototype realization constitutes a follow-up of a previous NP version employing a wound-field 6,300-r/min alternator feeding noncontrolled ac/dc converters. The major technical challenges faced in the design and development of the advanced NP prototype are outlined in this article, taking the previous lower-speed version as a technology reference. The system performance, as determined by the testing campaign, and lessons learned for future studies are addressed.

Load commutated inverters (LCIs) are still widely used for their robustness and reliability in high-power synchronous motor drives, in either single or multiple three-phase configurations. A restriction to their use in high-speed applications is due to the criticalities of thyristor operation at high switching frequencies. The upper frequency limits of LCIs are usually addressed in the existing literature as something independent of the drive architecture. On the contrary, this paper highlights how the maximum frequency that can be safely attained closely relates to the number of LCIs that are used to supply the synchronous motor. In fact, moving from a single to multiple three-phase arrangements is proved to introduce more stringent frequency constraints due to the mutual interaction between stator windings during commutations. Frequency limits for safe operation of single- and multiple-LCI drives are derived in quantitative terms and experimentally assessed on a 2-MW synchronous motor fed by a couple of LCIs. Practical implications of such limits in the design of high-power high-speed drives are finally discussed.

An electric machine equipped with n stator phases is characterized by a set of n × n phase inductances as concerns the stator section. In the case of nonuniform air gap, these inductances vary as the rotor moves. For their numerical determination as functions of the rotor position an accurate computation algorithm is proposed in this paper based on winding function theory. For permeance function identification, a numerically efficient method is employed based on the magnetostatic finite-element analysis of only three appropriately simplified machine models. In the presence of a field circuit, computation of mutual inductances among it and stator phases is also covered with the same approach. An extension of the method to permanent-magnet machines is also presented. Results are assessed on a six-phase synchronous generator prototype equipped with either a salient-pole wound-field rotor or with an interior permanent-magnet rotor.

Salient-pole synchronous machines are conventional electric machines which have been widely used and studied over decades. Some aspects of their modeling and analysis, however, still constitute a challenge for designers and require state-of-the-art methodologies to be applied. As an example, this paper addresses a 14-MVA salient-pole shipboard alternator, of which full-scale prototypes are built and tested with different damper cage designs. A time-stepping finite-element (FE) analysis is assessed against test results as a method to predict generator performance for the various damper cage design alternatives. FE simulations are shown to give accurate results even without model tuning if continuous end rings are used to short circuit damper bars. For the design solution with partial end arcs, model tuning is required, instead. For this purpose, a calibration method is proposed and successfully validated, which only requires a set of impedance measurements to be taken on the machine at standstill

Split-phase synchronous motors equipped with multiple-stator three-phase windings, each supplied by a load-commutated inverter, play an important role in today's very high power electrical-drive applications. A criticality of these systems is the possibility that commutations occur in different motor windings simultaneously. The resulting electromagnetic transient depends on the magnetic coupling of motor phases among them and with rotor circuits. In this paper, a model to describe this phenomenon is presented along with some dedicated tests, conducted on various split-phase configurations, to assess the model validity.