Search

The eight-chain RF system and radio frequency quadrupole (RFQ) linac were successfully integrated at the facility of the Linear IFMIF Prototype Accelerator (LIPAc). We achieved an unprecedented high current deuteron beam up to 55 mA in pulse operation ( $300~\mu \text{s}$ , 1 Hz). The keys of the success were (1) understanding reflected power from RFQ to RF system, (2) tuning each RF chain individually, (3) intensive RF conditioning for holding the stable RF power in the RFQ, and (4) optimizing the beam loading compensation control. Interestingly, the reflection at the breakdown in RF conditioning was higher than an estimation and reached up to 600 kW so far. In order to avoid damage on tetrodes by the high reflection, the impedance of each circulator was accurately adjusted.

The voltage transient appearing across and inside the toroidal field (TF) coils of JT-60SA in case of fast voltage variation, such as a safety discharge operated by the quench protection circuit (QPC), can be significantly high. In fact, the voltage distribution between coils and inside the winding can be not uniform during fast transient, being influenced by the presence of parasitic capacitances. A simplified electrical model of the TF coils has been developed to investigate this aspect. Its robustness has been proved by means of parametric sensitivity analysis, and the impact of the included simplifications has been evaluated. The obtained model has been used in conjunction with an electrical model of the TF circuit elements, including a simplified model of the QPC able to reproduce the voltage appearing across its terminals as observed during experimental operation of the QPC prototype. The worst case in terms of transient voltage applied to the winding has been identified, corresponding to a fault to ground occurring just after QPC operation. It has been verified that the resulting voltage is largely inside the coil insulation capability defined by performed insulation voltage tests.