Search

In this paper, we propose an ultra-low power compact 3-transistor voltage reference capable of operating at ultra-low supply voltages. The proposed circuit is based on the self-cascode MOSFET (SCM), which provides a reference voltage proportional to the threshold voltage ( $V_{T}$ ) difference of the two NMOS transistors that compose it. Reverse short-channel and narrow-width effects are explored to obtain such $V_{T}$ difference while using the same type of transistor. Ultra-low power operation and low line sensitivity is achieved by biasing the SCM with a zero- $V_{T}$ (native) transistor, also leading to an area efficient design. To show its versatility, three versions of the proposed circuit were fabricated in a standard 0.13- $\mu \text{m}$ CMOS process. Measurement performed over five samples showed an average temperature coefficient of 150–1500 ppm/°C. Minimum supply voltages of 0.12–0.4 V was observed while providing reference voltages around tens of mV. The proposed circuits consume 0.33–50 pW at room temperature and minimum supply voltage. The occupied area for any version is less than 0.0012 mm2.

In this paper, a self-biased temperature-compensated CMOS voltage reference operating at picowatt-level power consumption is presented. The core of the proposed circuit is the self-cascode MOSFET (SCM) and two variants are explored: a self-biased SCM (SBSCM) and a self-biased NMOS (SBNMOS) voltage reference. Power consumption and silicon area are remarkably reduced by combining subthreshold operation with a self-biased scheme. Trimming techniques for both circuits are discussed aiming at the reduction of the process variations impact. The proposed circuits were fabricated in a standard 0.18- $\mu \text{m}$ CMOS process. Measurement results from 24 samples of the same batch show that both circuits herein proposed can operate at 0.45/0.6 V minimum supply voltage, consuming merely 55/184 pW at room temperature. Temperature coefficient (TC) around 104/495 ppm/°C across a temperature range from 0 to 120 °C was measured. Employment of a trimming scheme allows a reduction of the average TC to 72.4/11.6 ppm/°C for the same temperature range. Both variants of the proposed circuit achieve a line sensitivity of 0.15/0.11 %/V and a power supply rejection better than −44/−45 dB from 10 to 10 kHz. In addition, SBSCM and SBNMOS prototypes occupy a silicon area of 0.002 and 0.0017 mm2, respectively.

Electromagnetic interference (EMI) disturbances coupled in the power supply of voltage and current references can severely degrade their performance, due to its finite power supply rejection (PSR). The design of a 90-dB PSR 4-dBm EMI-resistant NMOS-only voltage reference is herein presented. The voltage reference is designed based on the zero-temperature-coefficient transistor operating point. The high PSR is obtained using zero- $V_{T}$ transistors as active loads in the open and feedback loop of the circuit. Two versions, using standard $V_{T}$ and low-power $V_{T}$ transistors, were designed in a 130-nm CMOS process. Both are designed using the same thermal compensation principle. The circuits occupy 0.014 and 0.006 mm $^{2}$ of silicon area while consuming around 1.15 and 0.156 $\mu$ W at 27 $^\circ$ C, respectively. Postlayout simulations present a reference voltage of 206 and 450 mV with an average temperature coefficient of 321 and 86 ppm/ $^\circ$ C (1000 samples), under a temperature range from $-$ 55 to 125 $^\circ$ C. An EMI source of 4 dBm (1 $\text{V}_{\text{pp}}$ ) injected in the power supply, according to the direct power injection standard, yields $-$ 0.17% and $-$ 0.1 ${\%}$ of the maximum dc shift and 822 and 950 $\mu \text{V}_{\text{pp}}$ of the maximum peak-to-peak ripple for the standard $V_{T}$ and low-power $V_{T}$ implementations, respectively.