Search

Methanogenic biomass plays a key role with regard to methane production during anaerobic bioconversion of organic substrates. In this study, the effect of two different acclimated inocula on digestion performances was investigated by means of anaerobic batch tests on untreated and sonicated waste-activated sludge. Organics solubilization and removal kinetics, the abundance and physiological conditions of archaeal cells on ultimate methane yield were evaluated. The simultaneous presence of Methanosarcina and Methanosaeta in the archaeal biomass, the higher initial archaeal cells relative abundance and their occurrence in the aggregated forms were the main factors positively affecting the conversion into methane. The presence of the acclimated inoculum at the start-up influenced positively the methane improvement due to sonication, and the methane-specific production increased from 0.335 ± 0.03 to 0.420 ± 0.05 Nm3/kg VSfed. Moreover, the better physiological state of methanogens permitted to appreci...

In order to enhance anaerobic biodegradability of food waste (FW), thermal pretreatment was applied. The effectiveness in terms of biodegradability extent and process rate improvement was investigated. To this aim, Biomethane Potential tests were carried out under mesophilic and thermophilic conditions. The IWA anaerobic digestion Model 1 (ADM1), a powerful tool for modeling the anaerobic digestion (AD) of different substrates, was implemented to predict the methane production. Disintegration constant (k_dis) and maximum acetate uptake rate (km_ac) were identified as the most sensitive parameters and were calibrated over the observed methane production. Pretreatment improvement was more evident in enhancing parameters related to the process rate, such as solubilization extent (+153%) and disintegration constant (+18%), rather than increasing substrate biodegradability. Thermophilic conditions proved to be effective in speeding up the whole AD process, since all the kinetics were significantly improved (disintegration rate increased up to fivefold). Furthermore, it was demonstrated that, after k_dis and km_ac calibration, default thermophilic ADM1 parameters can be suitable to model FW digestion.

Anaerobic treatments have been successfully employed for more than one hundred years to stabilize sewage sludge. The main aim of sludge anaerobic digestion is the degradation and destruction of organic matter, with consequent sludge stabilization and pathogen reduction. One of the advantages of the fermentative system over aerobic treatment is the production of biogas (i.e., an available source of energy), which in some cases can be exploited to satisfy part of the energy requirements of the treatment plant. Nevertheless, inadequate knowledge of the principles governing the process often prevents satisfactory digester management, and thus there is an evident need for reliable kinetic models in order to improve performance and optimize the control strategies. In the present review, an overview of the anaerobic digestion models proposed in the specialized literature is presented. Models are grouped according to the degree of substrate characterization and thus of complexity (in terms of number of equations ...