Search

The treatment of pulp and paper mill wastewater by combining an ultrafiltration (UF) membrane and advanced oxidation processes (AOPs) was investigated at a bench scale. In the present study, the effects of impressive parameters on membrane fouling such as CaCl2 (mg/L), pH, and temperature (°C) were studied using response surface methodology (RSM). According to the results yielded, at the temperature of 45°C, pH of 10 and CaCl2 concentration of 400 mg/L, the fouling reached its minimum (32%). Therefore, scanning electron microscopy (SEM) analyses showed that the average thickness of cake layer on the UF surface decreased from approximately 75.37 µm to 11.38 µm by optimizing the operating conditions. The results showed the UF permeate quality is not sufficient. Thus, AOPs applied for permeate. In this way, the performance of sulfate and hydroxyl radicals, generated by the activation of oxidants, such as persulfate () and H2O2, by Fe(II) for removal efficiencies was examined. Accordingly, under the o...

The precipitation of dissolved sulphide ions by electrocoagulation was studied at laboratory scale using pulp and paper mill wastewaters. Concentrations of dissolved organic carbon and phosphorus were analysed before and after the electrocoagulation process to examine the suitability of the process for treatment of sulphide odour from pulp and paper mill wastewater. The electrochemical cell used in this study was constructed from monopolar dissolving iron electrodes. The dissolved iron concentration was directly proportional to the applied electric charge (C/L) at the tested current densities. Electrochemically produced ferrous iron (Fe2+) precipitated dissolved sulphide ions efficiently. Electricity consumption of the treatment was 4-8 C/mg S(2-) while iron consumption was 1.1-2.2 mg/mg S(2-) during the initial phase of the sulphide precipitation when the applied electric charge was 10-60 C/L. When 60 C/L was applied, 88% of dissolved sulphides and 40% of phosphorus was precipitated. The reduction in DOC was low during the sulphide precipitation. According to these results, electrocoagulation can precipitate dissolved sulphides effectively and thereby reduce sulphide odours of pulp and paper mill wastewaters.

A radiotracer method was applied to the measurement of inorganic contaminants migrating into food. The method was applied to the study of 10 samples of recycled paper and board. The only elements detected in the static migration test were zinc and iron, at concentrations close to the detection limit. Samples of rice, oats, custard powder, mushrooms and fries showed that traces of these elements had migrated from the packaging. The migration was limited to less than 1%, with the exception of the mushrooms, where the decomposition of the food had resulted in a 12.5% transfer of zinc from the mushroom bag after 8 days, equivalent to migration of 0.022 mg dm(-2). Shaking had no effect on migration, except in one case of custard powder where migration occurred at a level equivalent to 0.002 mg dm(-2). The maximum migration determined in the present study was 4.8 microg zinc and 2.6 microg iron, which is negligible when compared with the recommended daily intakes of 15 and 14 mg, respectively. When Tenax was tested as a food simulant, no zinc was detected (0.001 mg dm(-2)), although slight migration (0.001 mg dm(-2)) occurred into food.