Search

Purpose: Daily locomotion with a manual wheelchair includes curvilinear movements. However, little is known about the resisting forces in play during turning manoeuvres where the wheels are generally both rolling and swivelling. This study aimed at quantifying the swivelling resistance parameters of several wheels on different surfaces and to evaluate the effect of the curvature radius on these parameters., Materials and Methods: A specific test bench was designed allowing the swivelling resistance parameters of a wheel rolling while swivelling to be determined. Seven wheels (3 front and 4 rear wheels), three surfaces (plywood, linoleum and carpet), two loads (25 and 45 kg) and five curvature radii (from 0 to 0.4 m) were tested through a full factorial design experiment., Results: Results showed that the wheel type was the most influential factor on swivelling resistance parameters, followed by the surface and the curvature radius. The effect of the load on swivelling resistance parameters was found negligible when compared to the influence of other factors. A predictive model for swivelling resistance parameters of the different wheel/surface combinations was proposed, as a function of the curvature radius., Conclusion: This study allowed the swivelling resistance parameters of different wheel/surface combinations to be quantified, as a function of the curvature radius of the wheel trajectory. Combined with data on rolling resistance, these data could now be used to assess energy losses during real life ambulation or to achieve more realistic behaviour in virtual rehabilitation environment.Implications for rehabilitationSwivelling resistances are increased by carpet surfaces compared to tile surfaces.Conversely to rolling resistance, castors wheels are less prone to swivelling resistance than rear wheelsThe swivelling resistance of a wheel rolling while swivelling is decreased compared to a pure swivelling movement.Combined with data on rolling resistance, these data on swivelling resistance would allow energy loss during daily life activity to be determined or as input data for the control of wheelchair simulator in virtual environment used for rehabilitation.

Purpose: During manual wheelchair (MWC) skill acquisition, users adapt their propulsion technique through changes in biomechanical parameters. This evolution is assumed to be driven towards a more efficient behavior. However, when no specific training protocol is provided to users, little is known about how they spontaneously adapt during overground MWC locomotion. For that purpose, we investigated this biomechanical spontaneous adaptation within the initial phase of low-intensity uninstructed training. Materials and methods: Eighteen novice able-bodied subjects were enrolled to perform 120 min of uninstructed practice with a field MWC, distributed over 4 weeks. Subjects were tested during the very first minutes of the program, and after completion of the entire training protocol. Spatiotemporal parameters, handrim forces, motor force, rolling resistance and fore-aft stability were investigated using an instrumented field wheelchair. Results: Participants rapidly increased linear velocity of the MWC, thanks to a higher propulsive force. This was achieved thanks to higher handrim forces, combined with an improved fraction of effective force for startup but not for propulsion. Despite changes in mechanical actions exerted by the user on the MWC, rolling resistance remained constant but the stability index was noticeably altered. Conclusion: Even if no indication is given, novice MWC users rapidly change their propulsion technique and increase their linear speed. Such improvements in MWC mobility are allowed by a mastering of the whole range of stability offered by the MWC, which raises the issue of safety on the MWC.Implications for rehabilitationThe learning process of manual wheelchair locomotion induces adaptations for novice users, who change their propulsion technique to improve their mobility.Several wheelchair biomechanical parameters change during the learning process, especially wheelchair speed, handrim forces, motor force, rolling resistance and fore-aft stability.Fore-aft stability on the wheelchair rapidly reached the tipping limits for users. Technical solutions that preserve stability but do not hinder mobility have to beimplemented, for instance by adding anti-tipping wheels rather than moving the seat forwards with respect to the rear wheels axle.

Purpose: Wheelchair locomotion is constraining for the upper limbs and involves a set of motor tasks that need to be learnt by a novice user. To understand this integration process, we investigated the evolution of shoulder kinetics during start-up and propulsion within the initial phase of low-intensity uninstructed training., Materials and Methods: Seventeen novice able-bodied subjects performed a 120-min uninstructed practice distributed over 4 weeks. During the initial and final sessions, upper limbs kinematics and hand-rim kinetics were continuously collected. Inverse kinematics and dynamics coupled to a three-dimensional linked-segment model were used to compute shoulder net moments., Results: Participants increased the speed of the wheelchair with practice. In average, an increase of shoulder net moments and mechanical work during the push phase was observed. Conversely, during the recovery phase, participants slightly increased shoulder power but maintained a similar level of shoulder loading. However, individual evolutions allowed the definition of two groups defined as: "increasers", who increased shoulder loading and mechanical work versus "decreasers", who managed to limit shoulder loading while improving the wheelchair speed., Conclusion: These findings underline that individual adaptation strategies are essential to take into account when designing a rehabilitation protocol for wheelchair users. Implications for Rehabilitation The learning process of manual wheelchair locomotion is essential for the assimilation of motor tasks leading individuals to select their propulsion technique. Novice users display different learning strategies: some people increase shoulder loading very early but others spontaneously manage to increase the wheelchair speed while maintaining a constant level of shoulder loading. Wheelchair rehabilitation programs should be individualized to take into account the subject-specific learning strategy.

This article presents an examination and validation of a method to measure the field deceleration of a manual wheelchair (MWC) and to calculate the rolling resistances properties of the front and rear wheels. This method was based on the measurements of the MWC deceleration for various load settings from a 3D accelerometer. A mechanical model of MWC deceleration was developed which allowed computing the rolling resistance factors of front and rear wheels on a tested surface. Four deceleration sets were conducted on two paths on the same ground to test the repeatability. Two other deceleration sets were conducted using different load settings to compute the rolling resistance parameters (RPs). The theoretical decelerations of three load settings were computed and compared with the measured decelerations. The results showed good repeatability (variations of measures represented 6-11% of the nominal values) and no statistical difference between the path results. The rolling RPs were computed and their confidence intervals were assessed. For the last three sets, no significant difference was found between the theoretical and measured decelerations. This method can determine the specific rolling resistance properties of the wheels of a MWC, and be employed to establish a catalogue of the rolling resistance properties of wheels on various surfaces.